| Message ID | 1650419169-13760-14-git-send-email-quic_abhinavk@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add writeback block support for DPU | expand |
On 20/04/2022 04:46, Abhinav Kumar wrote: > Introduce the dpu_encoder_phys_* for the writeback interface > to handle writeback specific hardware programming. > > changes in v2: > - rebase on msm-next and fix related dependencies namely > the irq cleanup > - move cdp_cfg, aspace out of dpu_encoder_phys_wb > - leave a comment about wb master > - start using _dpu_hw_get_qos_lut from dpu_hw_util > - replace hw_pp->merge_3d check with DPU_CTL_ACTIVE_CFG > > Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> > --- > drivers/gpu/drm/msm/Makefile | 1 + > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 30 + > .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 751 +++++++++++++++++++++ > 3 files changed, 782 insertions(+) > create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c > > diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile > index ca779c1..0387f22 100644 > --- a/drivers/gpu/drm/msm/Makefile > +++ b/drivers/gpu/drm/msm/Makefile > @@ -60,6 +60,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \ > disp/dpu1/dpu_encoder.o \ > disp/dpu1/dpu_encoder_phys_cmd.o \ > disp/dpu1/dpu_encoder_phys_vid.o \ > + disp/dpu1/dpu_encoder_phys_wb.o \ > disp/dpu1/dpu_formats.o \ > disp/dpu1/dpu_hw_catalog.o \ > disp/dpu1/dpu_hw_ctl.o \ > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h > index 00951f3..5452f98 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h > @@ -150,6 +150,7 @@ struct dpu_encoder_phys_ops { > * @INTR_IDX_PINGPONG: Pingpong done unterrupt for cmd mode panel > * @INTR_IDX_UNDERRUN: Underrun unterrupt for video and cmd mode panel > * @INTR_IDX_RDPTR: Readpointer done unterrupt for cmd mode panel > + * @INTR_IDX_WB_DONE: Writeback fone interrupt for virtual connector > */ > enum dpu_intr_idx { > INTR_IDX_VSYNC, > @@ -157,6 +158,7 @@ enum dpu_intr_idx { > INTR_IDX_UNDERRUN, > INTR_IDX_CTL_START, > INTR_IDX_RDPTR, > + INTR_IDX_WB_DONE, > INTR_IDX_MAX, > }; > > @@ -224,6 +226,27 @@ static inline int dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys) > } > > /** > + * struct dpu_encoder_phys_wb - sub-class of dpu_encoder_phys to handle command > + * mode specific operations > + * @base: Baseclass physical encoder structure > + * @wbirq_refcount: Reference count of writeback interrupt > + * @wb_done_timeout_cnt: number of wb done irq timeout errors > + * @wb_cfg: writeback block config to store fb related details > + * @wb_conn: backpointer to writeback connector > + * @wb_job: backpointer to current writeback job > + * @dest: dpu buffer layout for current writeback output buffer > + */ > +struct dpu_encoder_phys_wb { > + struct dpu_encoder_phys base; > + atomic_t wbirq_refcount; > + int wb_done_timeout_cnt; > + struct dpu_hw_wb_cfg wb_cfg; > + struct drm_writeback_connector *wb_conn; > + struct drm_writeback_job *wb_job; > + struct dpu_hw_fmt_layout dest; > +}; > + > +/** > * struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to handle command > * mode specific operations > * @base: Baseclass physical encoder structure > @@ -291,6 +314,13 @@ struct dpu_encoder_phys *dpu_encoder_phys_cmd_init( > struct dpu_enc_phys_init_params *p); > > /** > + * dpu_encoder_phys_wb_init - initialize writeback encoder > + * @init: Pointer to init info structure with initialization params > + */ > +struct dpu_encoder_phys *dpu_encoder_phys_wb_init( > + struct dpu_enc_phys_init_params *p); > + > +/** > * dpu_encoder_helper_trigger_start - control start helper function > * This helper function may be optionally specified by physical > * encoders if they require ctl_start triggering. > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c > new file mode 100644 > index 0000000..128317fe > --- /dev/null > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c > @@ -0,0 +1,751 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +#define pr_fmt(fmt) "[drm:%s:%d] " fmt, __func__, __LINE__ > + > +#include <linux/debugfs.h> > + > +#include "dpu_encoder_phys.h" > +#include "dpu_formats.h" > +#include "dpu_hw_top.h" > +#include "dpu_hw_wb.h" > +#include "dpu_hw_lm.h" > +#include "dpu_hw_blk.h" > +#include "dpu_hw_merge3d.h" > +#include "dpu_hw_interrupts.h" > +#include "dpu_core_irq.h" > +#include "dpu_vbif.h" > +#include "dpu_crtc.h" > +#include "disp/msm_disp_snapshot.h" > + > +#define DEFAULT_MAX_WRITEBACK_WIDTH 2048 > + > +#define to_dpu_encoder_phys_wb(x) \ > + container_of(x, struct dpu_encoder_phys_wb, base) > + > +/** > + * dpu_encoder_phys_wb_is_master - report wb always as master encoder > + */ > +static bool dpu_encoder_phys_wb_is_master(struct dpu_encoder_phys *phys_enc) > +{ > + /* there is only one physical enc for dpu_writeback */ > + return true; > +} > + > +/** > + * dpu_encoder_phys_wb_set_ot_limit - set OT limit for writeback interface > + * @phys_enc: Pointer to physical encoder > + */ > +static void dpu_encoder_phys_wb_set_ot_limit( > + struct dpu_encoder_phys *phys_enc) > +{ > + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; > + struct dpu_vbif_set_ot_params ot_params; > + > + memset(&ot_params, 0, sizeof(ot_params)); > + ot_params.xin_id = hw_wb->caps->xin_id; > + ot_params.num = hw_wb->idx - WB_0; > + ot_params.width = phys_enc->cached_mode.hdisplay; > + ot_params.height = phys_enc->cached_mode.vdisplay; > + ot_params.is_wfd = true; > + ot_params.frame_rate = drm_mode_vrefresh(&phys_enc->cached_mode); > + ot_params.vbif_idx = hw_wb->caps->vbif_idx; > + ot_params.clk_ctrl = hw_wb->caps->clk_ctrl; > + ot_params.rd = false; > + > + dpu_vbif_set_ot_limit(phys_enc->dpu_kms, &ot_params); > +} > + > +/** > + * dpu_encoder_phys_wb_set_qos_remap - set QoS remapper for writeback > + * @phys_enc: Pointer to physical encoder > + */ > +static void dpu_encoder_phys_wb_set_qos_remap( > + struct dpu_encoder_phys *phys_enc) > +{ > + struct dpu_hw_wb *hw_wb; > + struct dpu_vbif_set_qos_params qos_params; > + > + if (!phys_enc || !phys_enc->parent || !phys_enc->parent->crtc) { > + DPU_ERROR("invalid arguments\n"); > + return; > + } > + > + if (!phys_enc->hw_wb || !phys_enc->hw_wb->caps) { > + DPU_ERROR("invalid writeback hardware\n"); > + return; > + } > + > + hw_wb = phys_enc->hw_wb; > + > + memset(&qos_params, 0, sizeof(qos_params)); > + qos_params.vbif_idx = hw_wb->caps->vbif_idx; > + qos_params.xin_id = hw_wb->caps->xin_id; > + qos_params.clk_ctrl = hw_wb->caps->clk_ctrl; > + qos_params.num = hw_wb->idx - WB_0; > + qos_params.is_rt = false; > + > + DPU_DEBUG("[qos_remap] wb:%d vbif:%d xin:%d is_rt:%d\n", > + qos_params.num, > + qos_params.vbif_idx, > + qos_params.xin_id, qos_params.is_rt); > + > + dpu_vbif_set_qos_remap(phys_enc->dpu_kms, &qos_params); > +} > + > +/** > + * dpu_encoder_phys_wb_set_qos - set QoS/danger/safe LUTs for writeback > + * @phys_enc: Pointer to physical encoder > + */ > +static void dpu_encoder_phys_wb_set_qos(struct dpu_encoder_phys *phys_enc) > +{ > + struct dpu_hw_wb *hw_wb; > + struct dpu_hw_wb_qos_cfg qos_cfg; > + struct dpu_mdss_cfg *catalog; > + struct dpu_qos_lut_tbl *qos_lut_tb; > + > + if (!phys_enc || !phys_enc->dpu_kms || !phys_enc->dpu_kms->catalog) { > + DPU_ERROR("invalid parameter(s)\n"); > + return; > + } > + > + catalog = phys_enc->dpu_kms->catalog; > + > + hw_wb = phys_enc->hw_wb; > + > + memset(&qos_cfg, 0, sizeof(struct dpu_hw_wb_qos_cfg)); > + qos_cfg.danger_safe_en = true; > + qos_cfg.danger_lut = > + catalog->perf.danger_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; > + > + qos_cfg.safe_lut = catalog->perf.safe_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; > + > + qos_lut_tb = &catalog->perf.qos_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; > + qos_cfg.creq_lut = _dpu_hw_get_qos_lut(qos_lut_tb, 0); > + > + if (hw_wb->ops.setup_qos_lut) > + hw_wb->ops.setup_qos_lut(hw_wb, &qos_cfg); > +} > + > +/** > + * dpu_encoder_phys_wb_setup_fb - setup output framebuffer > + * @phys_enc: Pointer to physical encoder > + * @fb: Pointer to output framebuffer > + * @wb_roi: Pointer to output region of interest > + */ > +static void dpu_encoder_phys_wb_setup_fb(struct dpu_encoder_phys *phys_enc, > + struct drm_framebuffer *fb) > +{ > + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc); > + struct dpu_hw_wb *hw_wb; > + struct dpu_hw_wb_cfg *wb_cfg; > + struct dpu_hw_wb_cdp_cfg cdp_cfg; > + > + if (!phys_enc || !phys_enc->dpu_kms || !phys_enc->dpu_kms->catalog) { > + DPU_ERROR("invalid encoder\n"); > + return; > + } > + > + hw_wb = phys_enc->hw_wb; > + wb_cfg = &wb_enc->wb_cfg; > + > + wb_cfg->intf_mode = phys_enc->intf_mode; > + wb_cfg->roi.x1 = 0; > + wb_cfg->roi.x2 = phys_enc->cached_mode.hdisplay; > + wb_cfg->roi.y1 = 0; > + wb_cfg->roi.y2 = phys_enc->cached_mode.vdisplay; > + > + if (hw_wb->ops.setup_roi) > + hw_wb->ops.setup_roi(hw_wb, wb_cfg); > + > + if (hw_wb->ops.setup_outformat) > + hw_wb->ops.setup_outformat(hw_wb, wb_cfg); > + > + if (hw_wb->ops.setup_cdp) { > + memset(&cdp_cfg, 0, sizeof(struct dpu_hw_wb_cdp_cfg)); > + > + cdp_cfg.enable = phys_enc->dpu_kms->catalog->perf.cdp_cfg > + [DPU_PERF_CDP_USAGE_NRT].wr_enable; > + cdp_cfg.ubwc_meta_enable = > + DPU_FORMAT_IS_UBWC(wb_cfg->dest.format); > + cdp_cfg.tile_amortize_enable = > + DPU_FORMAT_IS_UBWC(wb_cfg->dest.format) || > + DPU_FORMAT_IS_TILE(wb_cfg->dest.format); > + cdp_cfg.preload_ahead = DPU_WB_CDP_PRELOAD_AHEAD_64; > + > + hw_wb->ops.setup_cdp(hw_wb, &cdp_cfg); > + } > + > + if (hw_wb->ops.setup_outaddress) > + hw_wb->ops.setup_outaddress(hw_wb, wb_cfg); > +} > + > +/** > + * dpu_encoder_phys_wb_setup_cdp - setup chroma down prefetch block > + * @phys_enc:Pointer to physical encoder > + */ > +static void dpu_encoder_phys_wb_setup_cdp(struct dpu_encoder_phys *phys_enc) > +{ > + struct dpu_hw_wb *hw_wb; > + struct dpu_hw_ctl *ctl; > + > + if (!phys_enc) { > + DPU_ERROR("invalid encoder\n"); > + return; > + } > + > + hw_wb = phys_enc->hw_wb; > + ctl = phys_enc->hw_ctl; > + > + if (test_bit(DPU_CTL_ACTIVE_CFG, &ctl->caps->features) && > + (phys_enc->hw_ctl && > + phys_enc->hw_ctl->ops.setup_intf_cfg)) { > + struct dpu_hw_intf_cfg intf_cfg = {0}; > + struct dpu_hw_pingpong *hw_pp = phys_enc->hw_pp; > + enum dpu_3d_blend_mode mode_3d; > + > + mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc); > + > + intf_cfg.intf = DPU_NONE; > + intf_cfg.wb = hw_wb->idx; > + > + if (mode_3d && hw_pp && hw_pp->merge_3d) > + intf_cfg.merge_3d = hw_pp->merge_3d->idx; > + > + if (phys_enc->hw_pp->merge_3d && phys_enc->hw_pp->merge_3d->ops.setup_3d_mode) > + phys_enc->hw_pp->merge_3d->ops.setup_3d_mode(phys_enc->hw_pp->merge_3d, > + mode_3d); > + > + /* setup which pp blk will connect to this wb */ > + if (hw_pp && phys_enc->hw_wb->ops.bind_pingpong_blk) > + phys_enc->hw_wb->ops.bind_pingpong_blk(phys_enc->hw_wb, true, > + phys_enc->hw_pp->idx); > + > + phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl, &intf_cfg); > + } else if (phys_enc->hw_ctl && phys_enc->hw_ctl->ops.setup_intf_cfg) { > + struct dpu_hw_intf_cfg intf_cfg = {0}; > + > + intf_cfg.intf = DPU_NONE; > + intf_cfg.wb = hw_wb->idx; > + intf_cfg.mode_3d = > + dpu_encoder_helper_get_3d_blend_mode(phys_enc); > + phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl, &intf_cfg); > + } > +} > + > +/** > + * dpu_encoder_phys_wb_atomic_check - verify and fixup given atomic states > + * @phys_enc: Pointer to physical encoder > + * @crtc_state: Pointer to CRTC atomic state > + * @conn_state: Pointer to connector atomic state > + */ > +static int dpu_encoder_phys_wb_atomic_check( > + struct dpu_encoder_phys *phys_enc, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state) > +{ > + struct drm_framebuffer *fb; > + const struct drm_display_mode *mode; > + > + DPU_DEBUG("[atomic_check:%d, \"%s\",%d,%d]\n", > + phys_enc->intf_idx, mode->name, mode->hdisplay, mode->vdisplay); > + > + if (!conn_state->writeback_job || !conn_state->writeback_job->fb) > + return 0; > + > + fb = conn_state->writeback_job->fb; > + mode = &crtc_state->mode; > + > + if (!conn_state || !conn_state->connector) { > + DPU_ERROR("invalid connector state\n"); > + return -EINVAL; > + } else if (conn_state->connector->status != > + connector_status_connected) { > + DPU_ERROR("connector not connected %d\n", > + conn_state->connector->status); > + return -EINVAL; > + } > + > + DPU_DEBUG("[fb_id:%u][fb:%u,%u]\n", fb->base.id, > + fb->width, fb->height); > + > + if (fb->width != mode->hdisplay) { > + DPU_ERROR("invalid fb w=%d, mode w=%d\n", fb->width, > + mode->hdisplay); > + return -EINVAL; > + } else if (fb->height != mode->vdisplay) { > + DPU_ERROR("invalid fb h=%d, mode h=%d\n", fb->height, > + mode->vdisplay); > + return -EINVAL; > + } else if (fb->width > DEFAULT_MAX_WRITEBACK_WIDTH) { > + DPU_ERROR("invalid fb w=%d, maxlinewidth=%u\n", > + fb->width, DEFAULT_MAX_WRITEBACK_WIDTH); > + return -EINVAL; > + } Being not an expert in the DRM WB API, I have a question: are those hardware limitations or the DRM requirement that we can not write to the region inside the attached FB? > + > + return 0; > +} > + > + > +/** > + * _dpu_encoder_phys_wb_update_flush - flush hardware update > + * @phys_enc: Pointer to physical encoder > + */ > +static void _dpu_encoder_phys_wb_update_flush(struct dpu_encoder_phys *phys_enc) > +{ > + struct dpu_hw_wb *hw_wb; > + struct dpu_hw_ctl *hw_ctl; > + struct dpu_hw_pingpong *hw_pp; > + u32 pending_flush = 0; > + > + if (!phys_enc) > + return; > + > + hw_wb = phys_enc->hw_wb; > + hw_pp = phys_enc->hw_pp; > + hw_ctl = phys_enc->hw_ctl; > + > + DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); > + > + if (!hw_ctl) { > + DPU_DEBUG("[wb:%d] no ctl assigned\n", hw_wb->idx - WB_0); > + return; > + } > + > + if (hw_ctl->ops.update_pending_flush_wb) > + hw_ctl->ops.update_pending_flush_wb(hw_ctl, hw_wb->idx); > + > + if (hw_ctl->ops.update_pending_flush_merge_3d && hw_pp && hw_pp->merge_3d) > + hw_ctl->ops.update_pending_flush_merge_3d(hw_ctl, > + hw_pp->merge_3d->idx); > + > + if (hw_ctl->ops.get_pending_flush) > + pending_flush = hw_ctl->ops.get_pending_flush(hw_ctl); > + > + DPU_DEBUG("Pending flush mask for CTL_%d is 0x%x, WB %d\n", > + hw_ctl->idx - CTL_0, pending_flush, > + hw_wb->idx - WB_0); > +} > + > +/** > + * dpu_encoder_phys_wb_setup - setup writeback encoder > + * @phys_enc: Pointer to physical encoder > + */ > +static void dpu_encoder_phys_wb_setup( > + struct dpu_encoder_phys *phys_enc) > +{ > + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; > + struct drm_display_mode mode = phys_enc->cached_mode; > + struct drm_framebuffer *fb = NULL; > + > + DPU_DEBUG("[mode_set:%d, \"%s\",%d,%d]\n", > + hw_wb->idx - WB_0, mode.name, > + mode.hdisplay, mode.vdisplay); > + > + dpu_encoder_phys_wb_set_ot_limit(phys_enc); > + > + dpu_encoder_phys_wb_set_qos_remap(phys_enc); > + > + dpu_encoder_phys_wb_set_qos(phys_enc); > + > + dpu_encoder_phys_wb_setup_fb(phys_enc, fb); > + > + dpu_encoder_phys_wb_setup_cdp(phys_enc); > + > +} > + > +static void _dpu_encoder_phys_wb_frame_done_helper(void *arg) > +{ > + struct dpu_encoder_phys *phys_enc = arg; > + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc); > + > + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; > + unsigned long lock_flags; > + u32 event = DPU_ENCODER_FRAME_EVENT_DONE; > + > + DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); > + > + if (phys_enc->parent_ops->handle_frame_done) > + phys_enc->parent_ops->handle_frame_done(phys_enc->parent, > + phys_enc, event); > + > + if (phys_enc->parent_ops->handle_vblank_virt) > + phys_enc->parent_ops->handle_vblank_virt(phys_enc->parent, > + phys_enc); > + > + spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags); > + atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0); > + spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags); > + > + if (wb_enc->wb_conn) > + drm_writeback_signal_completion(wb_enc->wb_conn, 0); > + > + /* Signal any waiting atomic commit thread */ > + wake_up_all(&phys_enc->pending_kickoff_wq); > +} > + > +/** > + * dpu_encoder_phys_wb_done_irq - writeback interrupt handler > + * @arg: Pointer to writeback encoder > + * @irq_idx: interrupt index > + */ > +static void dpu_encoder_phys_wb_done_irq(void *arg, int irq_idx) > +{ > + _dpu_encoder_phys_wb_frame_done_helper(arg); > +} > + > +/** > + * dpu_encoder_phys_wb_irq_ctrl - irq control of WB > + * @phys: Pointer to physical encoder > + * @enable: indicates enable or disable interrupts > + */ > +static void dpu_encoder_phys_wb_irq_ctrl( > + struct dpu_encoder_phys *phys, bool enable) > +{ > + > + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys); > + int ret = 0; > + int refcount; > + > + refcount = atomic_read(&wb_enc->wbirq_refcount); > + > + if (enable && atomic_inc_return(&wb_enc->wbirq_refcount) == 1) { > + dpu_core_irq_register_callback(phys->dpu_kms, > + phys->irq[INTR_IDX_WB_DONE], dpu_encoder_phys_wb_done_irq, phys); > + if (ret) > + atomic_dec_return(&wb_enc->wbirq_refcount); > + } else if (!enable && > + atomic_dec_return(&wb_enc->wbirq_refcount) == 0) { > + dpu_core_irq_unregister_callback(phys->dpu_kms, phys->irq[INTR_IDX_WB_DONE]); > + if (ret) > + atomic_inc_return(&wb_enc->wbirq_refcount); > + } > +} > + > +static void dpu_encoder_phys_wb_atomic_mode_set( > + struct dpu_encoder_phys *phys_enc, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state) > +{ > + > + phys_enc->irq[INTR_IDX_WB_DONE] = phys_enc->hw_wb->caps->intr_wb_done; > +} > + > +static void _dpu_encoder_phys_wb_handle_wbdone_timeout( > + struct dpu_encoder_phys *phys_enc) > +{ > + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc); > + u32 frame_event = DPU_ENCODER_FRAME_EVENT_ERROR; > + > + wb_enc->wb_done_timeout_cnt++; > + > + if (wb_enc->wb_done_timeout_cnt == 1) > + msm_disp_snapshot_state(phys_enc->parent->dev); > + > + atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0); > + > + /* request a ctl reset before the next kickoff */ > + phys_enc->enable_state = DPU_ENC_ERR_NEEDS_HW_RESET; > + > + if (wb_enc->wb_conn) > + drm_writeback_signal_completion(wb_enc->wb_conn, 0); > + > + if (phys_enc->parent_ops->handle_frame_done) > + phys_enc->parent_ops->handle_frame_done( > + phys_enc->parent, phys_enc, frame_event); > +} > + > +/** > + * dpu_encoder_phys_wb_wait_for_commit_done - wait until request is committed > + * @phys_enc: Pointer to physical encoder > + */ > +static int dpu_encoder_phys_wb_wait_for_commit_done( > + struct dpu_encoder_phys *phys_enc) > +{ > + unsigned long ret; > + struct dpu_encoder_wait_info wait_info; > + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc); > + > + wait_info.wq = &phys_enc->pending_kickoff_wq; > + wait_info.atomic_cnt = &phys_enc->pending_kickoff_cnt; > + wait_info.timeout_ms = KICKOFF_TIMEOUT_MS; > + > + ret = dpu_encoder_helper_wait_for_irq(phys_enc, INTR_IDX_WB_DONE, > + dpu_encoder_phys_wb_done_irq, &wait_info); > + if (ret == -ETIMEDOUT) > + _dpu_encoder_phys_wb_handle_wbdone_timeout(phys_enc); > + else if (!ret) > + wb_enc->wb_done_timeout_cnt = 0; > + > + return ret; > +} > + > +/** > + * dpu_encoder_phys_wb_prepare_for_kickoff - pre-kickoff processing > + * @phys_enc: Pointer to physical encoder > + * Returns: Zero on success > + */ > +static void dpu_encoder_phys_wb_prepare_for_kickoff( > + struct dpu_encoder_phys *phys_enc) > +{ > + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc); > + struct drm_connector *drm_conn; > + struct drm_connector_state *state; > + > + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); > + > + if (!wb_enc->wb_conn || !wb_enc->wb_job) { > + DPU_ERROR("invalid wb_conn or wb_job\n"); > + return; > + } > + > + drm_conn = &wb_enc->wb_conn->base; > + state = drm_conn->state; > + > + if (wb_enc->wb_conn && wb_enc->wb_job) > + drm_writeback_queue_job(wb_enc->wb_conn, state); > + > + dpu_encoder_phys_wb_setup(phys_enc); > + > + _dpu_encoder_phys_wb_update_flush(phys_enc); > +} > + > +/** > + * dpu_encoder_phys_wb_needs_single_flush - trigger flush processing > + * @phys_enc: Pointer to physical encoder > + */ > +static bool dpu_encoder_phys_wb_needs_single_flush(struct dpu_encoder_phys *phys_enc) > +{ > + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); > + return false; > +} > + > +/** > + * dpu_encoder_phys_wb_handle_post_kickoff - post-kickoff processing > + * @phys_enc: Pointer to physical encoder > + */ > +static void dpu_encoder_phys_wb_handle_post_kickoff( > + struct dpu_encoder_phys *phys_enc) > +{ > + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); > + > +} > + > +/** > + * dpu_encoder_phys_wb_enable - enable writeback encoder > + * @phys_enc: Pointer to physical encoder > + */ > +static void dpu_encoder_phys_wb_enable(struct dpu_encoder_phys *phys_enc) > +{ > + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); > + phys_enc->enable_state = DPU_ENC_ENABLED; > +} > +/** > + * dpu_encoder_phys_wb_disable - disable writeback encoder > + * @phys_enc: Pointer to physical encoder > + */ > +static void dpu_encoder_phys_wb_disable(struct dpu_encoder_phys *phys_enc) > +{ > + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; > + struct dpu_hw_ctl *hw_ctl = phys_enc->hw_ctl; > + > + DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); > + > + if (phys_enc->enable_state == DPU_ENC_DISABLED) { > + DPU_ERROR("encoder is already disabled\n"); > + return; > + } > + > + /* reset h/w before final flush */ > + if (phys_enc->hw_ctl->ops.clear_pending_flush) > + phys_enc->hw_ctl->ops.clear_pending_flush(phys_enc->hw_ctl); > + > + /* > + * New CTL reset sequence from 5.0 MDP onwards. > + * If has_3d_merge_reset is not set, legacy reset > + * sequence is executed. > + * > + * Legacy reset sequence has not been implemented yet. > + * Any target earlier than SM8150 will need it and when > + * WB support is added to those targets will need to add > + * the legacy teardown sequence as well. > + */ > + if (hw_ctl->caps->features & BIT(DPU_CTL_ACTIVE_CFG)) > + dpu_encoder_helper_phys_cleanup(phys_enc); > + > + phys_enc->enable_state = DPU_ENC_DISABLED; > +} > + > +/** > + * dpu_encoder_phys_wb_destroy - destroy writeback encoder > + * @phys_enc: Pointer to physical encoder > + */ > +static void dpu_encoder_phys_wb_destroy(struct dpu_encoder_phys *phys_enc) > +{ > + DPU_DEBUG("[wb:%d]\n", phys_enc->intf_idx - INTF_0); > + > + if (!phys_enc) > + return; > + > + kfree(phys_enc); > +} > + > +static void dpu_encoder_phys_wb_prepare_wb_job(struct dpu_encoder_phys *phys_enc, > + struct drm_writeback_job *job) > +{ > + const struct msm_format *format; > + struct msm_gem_address_space *aspace; > + struct dpu_hw_wb_cfg *wb_cfg; > + int ret; > + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc); > + > + if (!job->fb) > + return; > + > + wb_enc->wb_job = job; > + wb_enc->wb_conn = job->connector; > + aspace = phys_enc->dpu_kms->base.aspace; > + > + wb_cfg = &wb_enc->wb_cfg; > + > + memset(wb_cfg, 0, sizeof(struct dpu_hw_wb_cfg)); > + > + ret = msm_framebuffer_prepare(job->fb, aspace, false); > + if (ret) { > + DPU_ERROR("prep fb failed, %d\n", ret); > + return; > + } > + > + format = msm_framebuffer_format(job->fb); > + > + wb_cfg->dest.format = dpu_get_dpu_format_ext( > + format->pixel_format, job->fb->modifier); > + if (!wb_cfg->dest.format) { > + /* this error should be detected during atomic_check */ > + DPU_ERROR("failed to get format %x\n", format->pixel_format); > + return; > + } > + > + ret = dpu_format_populate_layout(aspace, job->fb, &wb_cfg->dest); > + if (ret) { > + DPU_DEBUG("failed to populate layout %d\n", ret); > + return; > + } > + > + wb_cfg->dest.width = job->fb->width; > + wb_cfg->dest.height = job->fb->height; > + wb_cfg->dest.num_planes = wb_cfg->dest.format->num_planes; > + > + if ((wb_cfg->dest.format->fetch_planes == DPU_PLANE_PLANAR) && > + (wb_cfg->dest.format->element[0] == C1_B_Cb)) > + swap(wb_cfg->dest.plane_addr[1], wb_cfg->dest.plane_addr[2]); > + > + DPU_DEBUG("[fb_offset:%8.8x,%8.8x,%8.8x,%8.8x]\n", > + wb_cfg->dest.plane_addr[0], wb_cfg->dest.plane_addr[1], > + wb_cfg->dest.plane_addr[2], wb_cfg->dest.plane_addr[3]); > + > + DPU_DEBUG("[fb_stride:%8.8x,%8.8x,%8.8x,%8.8x]\n", > + wb_cfg->dest.plane_pitch[0], wb_cfg->dest.plane_pitch[1], > + wb_cfg->dest.plane_pitch[2], wb_cfg->dest.plane_pitch[3]); > +} > + > +static void dpu_encoder_phys_wb_cleanup_wb_job(struct dpu_encoder_phys *phys_enc, > + struct drm_writeback_job *job) > +{ > + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc); > + struct msm_gem_address_space *aspace; > + > + if (!job->fb) > + return; > + > + aspace = phys_enc->dpu_kms->base.aspace; > + > + msm_framebuffer_cleanup(job->fb, aspace, false); > + wb_enc->wb_job = NULL; > + wb_enc->wb_conn = NULL; > +} > + > +/** > + * dpu_encoder_phys_wb_init_ops - initialize writeback operations > + * @ops: Pointer to encoder operation table > + */ > +static void dpu_encoder_phys_wb_init_ops(struct dpu_encoder_phys_ops *ops) > +{ > + ops->is_master = dpu_encoder_phys_wb_is_master; > + ops->atomic_mode_set = dpu_encoder_phys_wb_atomic_mode_set; > + ops->enable = dpu_encoder_phys_wb_enable; > + ops->disable = dpu_encoder_phys_wb_disable; > + ops->destroy = dpu_encoder_phys_wb_destroy; > + ops->atomic_check = dpu_encoder_phys_wb_atomic_check; > + ops->wait_for_commit_done = dpu_encoder_phys_wb_wait_for_commit_done; > + ops->prepare_for_kickoff = dpu_encoder_phys_wb_prepare_for_kickoff; > + ops->handle_post_kickoff = dpu_encoder_phys_wb_handle_post_kickoff; > + ops->needs_single_flush = dpu_encoder_phys_wb_needs_single_flush; > + ops->trigger_start = dpu_encoder_helper_trigger_start; > + ops->prepare_wb_job = dpu_encoder_phys_wb_prepare_wb_job; > + ops->cleanup_wb_job = dpu_encoder_phys_wb_cleanup_wb_job; > + ops->irq_control = dpu_encoder_phys_wb_irq_ctrl; > +} > + > +/** > + * dpu_encoder_phys_wb_init - initialize writeback encoder > + * @init: Pointer to init info structure with initialization params > + */ > +struct dpu_encoder_phys *dpu_encoder_phys_wb_init( > + struct dpu_enc_phys_init_params *p) > +{ > + struct dpu_encoder_phys *phys_enc = NULL; > + struct dpu_encoder_phys_wb *wb_enc = NULL; > + int ret = 0; > + int i; > + > + DPU_DEBUG("\n"); > + > + if (!p || !p->parent) { > + DPU_ERROR("invalid params\n"); > + ret = -EINVAL; > + goto fail_alloc; > + } > + > + wb_enc = kzalloc(sizeof(*wb_enc), GFP_KERNEL); > + if (!wb_enc) { > + DPU_ERROR("failed to allocate wb phys_enc enc\n"); > + ret = -ENOMEM; > + goto fail_alloc; > + } > + > + phys_enc = &wb_enc->base; > + phys_enc->hw_mdptop = p->dpu_kms->hw_mdp; > + phys_enc->intf_idx = p->intf_idx; > + > + dpu_encoder_phys_wb_init_ops(&phys_enc->ops); > + phys_enc->parent = p->parent; > + phys_enc->parent_ops = p->parent_ops; > + phys_enc->dpu_kms = p->dpu_kms; > + phys_enc->split_role = p->split_role; > + phys_enc->intf_mode = INTF_MODE_WB_LINE; > + phys_enc->intf_idx = p->intf_idx; > + phys_enc->enc_spinlock = p->enc_spinlock; > + > + atomic_set(&wb_enc->wbirq_refcount, 0); > + > + for (i = 0; i < ARRAY_SIZE(phys_enc->irq); i++) > + phys_enc->irq[i] = -EINVAL; > + > + atomic_set(&phys_enc->pending_kickoff_cnt, 0); > + atomic_set(&phys_enc->vblank_refcount, 0); > + wb_enc->wb_done_timeout_cnt = 0; > + > + init_waitqueue_head(&phys_enc->pending_kickoff_wq); > + phys_enc->enable_state = DPU_ENC_DISABLED; > + > + DPU_DEBUG("Created dpu_encoder_phys for wb %d\n", > + phys_enc->intf_idx); > + > + return phys_enc; > + > +fail_alloc: > + return ERR_PTR(ret); > +}
On 4/20/2022 12:49 AM, Dmitry Baryshkov wrote: > On 20/04/2022 04:46, Abhinav Kumar wrote: >> Introduce the dpu_encoder_phys_* for the writeback interface >> to handle writeback specific hardware programming. >> >> changes in v2: >>     - rebase on msm-next and fix related dependencies namely >>      the irq cleanup >>     - move cdp_cfg, aspace out of dpu_encoder_phys_wb >>     - leave a comment about wb master >>     - start using _dpu_hw_get_qos_lut from dpu_hw_util >>     - replace hw_pp->merge_3d check with DPU_CTL_ACTIVE_CFG >> >> Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> >> --- >>  drivers/gpu/drm/msm/Makefile                      |  1 + >>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h  | 30 + >>  .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c   | 751 >> +++++++++++++++++++++ >>  3 files changed, 782 insertions(+) >>  create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c >> >> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile >> index ca779c1..0387f22 100644 >> --- a/drivers/gpu/drm/msm/Makefile >> +++ b/drivers/gpu/drm/msm/Makefile >> @@ -60,6 +60,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \ >>      disp/dpu1/dpu_encoder.o \ >>      disp/dpu1/dpu_encoder_phys_cmd.o \ >>      disp/dpu1/dpu_encoder_phys_vid.o \ >> +   disp/dpu1/dpu_encoder_phys_wb.o \ >>      disp/dpu1/dpu_formats.o \ >>      disp/dpu1/dpu_hw_catalog.o \ >>      disp/dpu1/dpu_hw_ctl.o \ >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h >> index 00951f3..5452f98 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h >> @@ -150,6 +150,7 @@ struct dpu_encoder_phys_ops { >>   * @INTR_IDX_PINGPONG: Pingpong done unterrupt for cmd mode panel >>   * @INTR_IDX_UNDERRUN: Underrun unterrupt for video and cmd mode panel >>   * @INTR_IDX_RDPTR:   Readpointer done unterrupt for cmd mode panel >> + * @INTR_IDX_WB_DONE: Writeback fone interrupt for virtual connector >>   */ >>  enum dpu_intr_idx { >>      INTR_IDX_VSYNC, >> @@ -157,6 +158,7 @@ enum dpu_intr_idx { >>      INTR_IDX_UNDERRUN, >>      INTR_IDX_CTL_START, >>      INTR_IDX_RDPTR, >> +   INTR_IDX_WB_DONE, >>      INTR_IDX_MAX, >>  }; >> @@ -224,6 +226,27 @@ static inline int >> dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys) >>  } >>  /** >> + * struct dpu_encoder_phys_wb - sub-class of dpu_encoder_phys to >> handle command >> + *   mode specific operations >> + * @base:   Baseclass physical encoder structure >> + * @wbirq_refcount:    Reference count of writeback interrupt >> + * @wb_done_timeout_cnt: number of wb done irq timeout errors >> + * @wb_cfg: writeback block config to store fb related details >> + * @wb_conn: backpointer to writeback connector >> + * @wb_job: backpointer to current writeback job >> + * @dest:  dpu buffer layout for current writeback output buffer >> + */ >> +struct dpu_encoder_phys_wb { >> +   struct dpu_encoder_phys base; >> +   atomic_t wbirq_refcount; >> +   int wb_done_timeout_cnt; >> +   struct dpu_hw_wb_cfg wb_cfg; >> +   struct drm_writeback_connector *wb_conn; >> +   struct drm_writeback_job *wb_job; >> +   struct dpu_hw_fmt_layout dest; >> +}; >> + >> +/** >>   * struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to >> handle command >>   *   mode specific operations >>   * @base:   Baseclass physical encoder structure >> @@ -291,6 +314,13 @@ struct dpu_encoder_phys *dpu_encoder_phys_cmd_init( >>          struct dpu_enc_phys_init_params *p); >>  /** >> + * dpu_encoder_phys_wb_init - initialize writeback encoder >> + * @init:   Pointer to init info structure with initialization params >> + */ >> +struct dpu_encoder_phys *dpu_encoder_phys_wb_init( >> +       struct dpu_enc_phys_init_params *p); >> + >> +/** >>   * dpu_encoder_helper_trigger_start - control start helper function >>   *   This helper function may be optionally specified by physical >>   *   encoders if they require ctl_start triggering. >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c >> new file mode 100644 >> index 0000000..128317fe >> --- /dev/null >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c >> @@ -0,0 +1,751 @@ >> +// SPDX-License-Identifier: GPL-2.0-only >> +/* >> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights >> reserved. >> + */ >> + >> +#define pr_fmt(fmt)   "[drm:%s:%d] " fmt, __func__, __LINE__ >> + >> +#include <linux/debugfs.h> >> + >> +#include "dpu_encoder_phys.h" >> +#include "dpu_formats.h" >> +#include "dpu_hw_top.h" >> +#include "dpu_hw_wb.h" >> +#include "dpu_hw_lm.h" >> +#include "dpu_hw_blk.h" >> +#include "dpu_hw_merge3d.h" >> +#include "dpu_hw_interrupts.h" >> +#include "dpu_core_irq.h" >> +#include "dpu_vbif.h" >> +#include "dpu_crtc.h" >> +#include "disp/msm_disp_snapshot.h" >> + >> +#define DEFAULT_MAX_WRITEBACK_WIDTH 2048 >> + >> +#define to_dpu_encoder_phys_wb(x) \ >> +   container_of(x, struct dpu_encoder_phys_wb, base) >> + >> +/** >> + * dpu_encoder_phys_wb_is_master - report wb always as master encoder >> + */ >> +static bool dpu_encoder_phys_wb_is_master(struct dpu_encoder_phys >> *phys_enc) >> +{ >> +   /* there is only one physical enc for dpu_writeback */ >> +   return true; >> +} >> + >> +/** >> + * dpu_encoder_phys_wb_set_ot_limit - set OT limit for writeback >> interface >> + * @phys_enc:   Pointer to physical encoder >> + */ >> +static void dpu_encoder_phys_wb_set_ot_limit( >> +       struct dpu_encoder_phys *phys_enc) >> +{ >> +   struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; >> +   struct dpu_vbif_set_ot_params ot_params; >> + >> +   memset(&ot_params, 0, sizeof(ot_params)); >> +   ot_params.xin_id = hw_wb->caps->xin_id; >> +   ot_params.num = hw_wb->idx - WB_0; >> +   ot_params.width = phys_enc->cached_mode.hdisplay; >> +   ot_params.height = phys_enc->cached_mode.vdisplay; >> +   ot_params.is_wfd = true; >> +   ot_params.frame_rate = drm_mode_vrefresh(&phys_enc->cached_mode); >> +   ot_params.vbif_idx = hw_wb->caps->vbif_idx; >> +   ot_params.clk_ctrl = hw_wb->caps->clk_ctrl; >> +   ot_params.rd = false; >> + >> +   dpu_vbif_set_ot_limit(phys_enc->dpu_kms, &ot_params); >> +} >> + >> +/** >> + * dpu_encoder_phys_wb_set_qos_remap - set QoS remapper for writeback >> + * @phys_enc:   Pointer to physical encoder >> + */ >> +static void dpu_encoder_phys_wb_set_qos_remap( >> +       struct dpu_encoder_phys *phys_enc) >> +{ >> +   struct dpu_hw_wb *hw_wb; >> +   struct dpu_vbif_set_qos_params qos_params; >> + >> +   if (!phys_enc || !phys_enc->parent || !phys_enc->parent->crtc) { >> +       DPU_ERROR("invalid arguments\n"); >> +       return; >> +   } >> + >> +   if (!phys_enc->hw_wb || !phys_enc->hw_wb->caps) { >> +       DPU_ERROR("invalid writeback hardware\n"); >> +       return; >> +   } >> + >> +   hw_wb = phys_enc->hw_wb; >> + >> +   memset(&qos_params, 0, sizeof(qos_params)); >> +   qos_params.vbif_idx = hw_wb->caps->vbif_idx; >> +   qos_params.xin_id = hw_wb->caps->xin_id; >> +   qos_params.clk_ctrl = hw_wb->caps->clk_ctrl; >> +   qos_params.num = hw_wb->idx - WB_0; >> +   qos_params.is_rt = false; >> + >> +   DPU_DEBUG("[qos_remap] wb:%d vbif:%d xin:%d is_rt:%d\n", >> +           qos_params.num, >> +           qos_params.vbif_idx, >> +           qos_params.xin_id, qos_params.is_rt); >> + >> +   dpu_vbif_set_qos_remap(phys_enc->dpu_kms, &qos_params); >> +} >> + >> +/** >> + * dpu_encoder_phys_wb_set_qos - set QoS/danger/safe LUTs for writeback >> + * @phys_enc:   Pointer to physical encoder >> + */ >> +static void dpu_encoder_phys_wb_set_qos(struct dpu_encoder_phys >> *phys_enc) >> +{ >> +   struct dpu_hw_wb *hw_wb; >> +   struct dpu_hw_wb_qos_cfg qos_cfg; >> +   struct dpu_mdss_cfg *catalog; >> +   struct dpu_qos_lut_tbl *qos_lut_tb; >> + >> +   if (!phys_enc || !phys_enc->dpu_kms || >> !phys_enc->dpu_kms->catalog) { >> +       DPU_ERROR("invalid parameter(s)\n"); >> +       return; >> +   } >> + >> +   catalog = phys_enc->dpu_kms->catalog; >> + >> +   hw_wb = phys_enc->hw_wb; >> + >> +   memset(&qos_cfg, 0, sizeof(struct dpu_hw_wb_qos_cfg)); >> +   qos_cfg.danger_safe_en = true; >> +   qos_cfg.danger_lut = >> +       catalog->perf.danger_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; >> + >> +   qos_cfg.safe_lut = >> catalog->perf.safe_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; >> + >> +   qos_lut_tb = &catalog->perf.qos_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; >> +   qos_cfg.creq_lut = _dpu_hw_get_qos_lut(qos_lut_tb, 0); >> + >> +   if (hw_wb->ops.setup_qos_lut) >> +       hw_wb->ops.setup_qos_lut(hw_wb, &qos_cfg); >> +} >> + >> +/** >> + * dpu_encoder_phys_wb_setup_fb - setup output framebuffer >> + * @phys_enc:   Pointer to physical encoder >> + * @fb:       Pointer to output framebuffer >> + * @wb_roi:   Pointer to output region of interest >> + */ >> +static void dpu_encoder_phys_wb_setup_fb(struct dpu_encoder_phys >> *phys_enc, >> +       struct drm_framebuffer *fb) >> +{ >> +   struct dpu_encoder_phys_wb *wb_enc = >> to_dpu_encoder_phys_wb(phys_enc); >> +   struct dpu_hw_wb *hw_wb; >> +   struct dpu_hw_wb_cfg *wb_cfg; >> +   struct dpu_hw_wb_cdp_cfg cdp_cfg; >> + >> +   if (!phys_enc || !phys_enc->dpu_kms || >> !phys_enc->dpu_kms->catalog) { >> +       DPU_ERROR("invalid encoder\n"); >> +       return; >> +   } >> + >> +   hw_wb = phys_enc->hw_wb; >> +   wb_cfg = &wb_enc->wb_cfg; >> + >> +   wb_cfg->intf_mode = phys_enc->intf_mode; >> +   wb_cfg->roi.x1 = 0; >> +   wb_cfg->roi.x2 = phys_enc->cached_mode.hdisplay; >> +   wb_cfg->roi.y1 = 0; >> +   wb_cfg->roi.y2 = phys_enc->cached_mode.vdisplay; >> + >> +   if (hw_wb->ops.setup_roi) >> +       hw_wb->ops.setup_roi(hw_wb, wb_cfg); >> + >> +   if (hw_wb->ops.setup_outformat) >> +       hw_wb->ops.setup_outformat(hw_wb, wb_cfg); >> + >> +   if (hw_wb->ops.setup_cdp) { >> +       memset(&cdp_cfg, 0, sizeof(struct dpu_hw_wb_cdp_cfg)); >> + >> +       cdp_cfg.enable = phys_enc->dpu_kms->catalog->perf.cdp_cfg >> +               [DPU_PERF_CDP_USAGE_NRT].wr_enable; >> +       cdp_cfg.ubwc_meta_enable = >> +               DPU_FORMAT_IS_UBWC(wb_cfg->dest.format); >> +       cdp_cfg.tile_amortize_enable = >> +               DPU_FORMAT_IS_UBWC(wb_cfg->dest.format) || >> +               DPU_FORMAT_IS_TILE(wb_cfg->dest.format); >> +       cdp_cfg.preload_ahead = DPU_WB_CDP_PRELOAD_AHEAD_64; >> + >> +       hw_wb->ops.setup_cdp(hw_wb, &cdp_cfg); >> +   } >> + >> +   if (hw_wb->ops.setup_outaddress) >> +       hw_wb->ops.setup_outaddress(hw_wb, wb_cfg); >> +} >> + >> +/** >> + * dpu_encoder_phys_wb_setup_cdp - setup chroma down prefetch block >> + * @phys_enc:Pointer to physical encoder >> + */ >> +static void dpu_encoder_phys_wb_setup_cdp(struct dpu_encoder_phys >> *phys_enc) >> +{ >> +   struct dpu_hw_wb *hw_wb; >> +   struct dpu_hw_ctl *ctl; >> + >> +   if (!phys_enc) { >> +       DPU_ERROR("invalid encoder\n"); >> +       return; >> +   } >> + >> +   hw_wb = phys_enc->hw_wb; >> +   ctl = phys_enc->hw_ctl; >> + >> +   if (test_bit(DPU_CTL_ACTIVE_CFG, &ctl->caps->features) && >> +       (phys_enc->hw_ctl && >> +        phys_enc->hw_ctl->ops.setup_intf_cfg)) { >> +       struct dpu_hw_intf_cfg intf_cfg = {0}; >> +       struct dpu_hw_pingpong *hw_pp = phys_enc->hw_pp; >> +       enum dpu_3d_blend_mode mode_3d; >> + >> +       mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc); >> + >> +       intf_cfg.intf = DPU_NONE; >> +       intf_cfg.wb = hw_wb->idx; >> + >> +       if (mode_3d && hw_pp && hw_pp->merge_3d) >> +           intf_cfg.merge_3d = hw_pp->merge_3d->idx; >> + >> +       if (phys_enc->hw_pp->merge_3d && >> phys_enc->hw_pp->merge_3d->ops.setup_3d_mode) >> + >> phys_enc->hw_pp->merge_3d->ops.setup_3d_mode(phys_enc->hw_pp->merge_3d, >> +                   mode_3d); >> + >> +       /* setup which pp blk will connect to this wb */ >> +       if (hw_pp && phys_enc->hw_wb->ops.bind_pingpong_blk) >> +           phys_enc->hw_wb->ops.bind_pingpong_blk(phys_enc->hw_wb, >> true, >> +                   phys_enc->hw_pp->idx); >> + >> +       phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl, >> &intf_cfg); >> +   } else if (phys_enc->hw_ctl && >> phys_enc->hw_ctl->ops.setup_intf_cfg) { >> +       struct dpu_hw_intf_cfg intf_cfg = {0}; >> + >> +       intf_cfg.intf = DPU_NONE; >> +       intf_cfg.wb = hw_wb->idx; >> +       intf_cfg.mode_3d = >> +           dpu_encoder_helper_get_3d_blend_mode(phys_enc); >> +       phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl, >> &intf_cfg); >> +   } >> +} >> + >> +/** >> + * dpu_encoder_phys_wb_atomic_check - verify and fixup given atomic >> states >> + * @phys_enc:   Pointer to physical encoder >> + * @crtc_state:   Pointer to CRTC atomic state >> + * @conn_state:   Pointer to connector atomic state >> + */ >> +static int dpu_encoder_phys_wb_atomic_check( >> +       struct dpu_encoder_phys *phys_enc, >> +       struct drm_crtc_state *crtc_state, >> +       struct drm_connector_state *conn_state) >> +{ >> +   struct drm_framebuffer *fb; >> +   const struct drm_display_mode *mode; >> + >> +   DPU_DEBUG("[atomic_check:%d, \"%s\",%d,%d]\n", >> +           phys_enc->intf_idx, mode->name, mode->hdisplay, >> mode->vdisplay); >> + >> +   if (!conn_state->writeback_job || !conn_state->writeback_job->fb) >> +       return 0; >> + >> +   fb = conn_state->writeback_job->fb; >> +   mode = &crtc_state->mode; >> + >> +   if (!conn_state || !conn_state->connector) { >> +       DPU_ERROR("invalid connector state\n"); >> +       return -EINVAL; >> +   } else if (conn_state->connector->status != >> +           connector_status_connected) { >> +       DPU_ERROR("connector not connected %d\n", >> +               conn_state->connector->status); >> +       return -EINVAL; >> +   } >> + >> +   DPU_DEBUG("[fb_id:%u][fb:%u,%u]\n", fb->base.id, >> +           fb->width, fb->height); >> + >> +   if (fb->width != mode->hdisplay) { >> +       DPU_ERROR("invalid fb w=%d, mode w=%d\n", fb->width, >> +               mode->hdisplay); >> +       return -EINVAL; >> +   } else if (fb->height != mode->vdisplay) { >> +       DPU_ERROR("invalid fb h=%d, mode h=%d\n", fb->height, >> +                 mode->vdisplay); >> +       return -EINVAL; >> +   } else if (fb->width > DEFAULT_MAX_WRITEBACK_WIDTH) { >> +       DPU_ERROR("invalid fb w=%d, maxlinewidth=%u\n", >> +                 fb->width, DEFAULT_MAX_WRITEBACK_WIDTH); >> +       return -EINVAL; >> +   } > > Being not an expert in the DRM WB API, I have a question: are those > hardware limitations or the DRM requirement that we can not write to the > region inside the attached FB? Both. The first two checks are indeed DRM requirement and infact igt writeback tests this to ensure that the driver rejects any invalid FBs which are not equal to the mode that was set. https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/blob/master/tests/kms_writeback.c#L409 The last check is coming from our hardware. > >> + >> +   return 0; >> +} >> + >> + >> +/** >> + * _dpu_encoder_phys_wb_update_flush - flush hardware update >> + * @phys_enc:   Pointer to physical encoder >> + */ >> +static void _dpu_encoder_phys_wb_update_flush(struct dpu_encoder_phys >> *phys_enc) >> +{ >> +   struct dpu_hw_wb *hw_wb; >> +   struct dpu_hw_ctl *hw_ctl; >> +   struct dpu_hw_pingpong *hw_pp; >> +   u32 pending_flush = 0; >> + >> +   if (!phys_enc) >> +       return; >> + >> +   hw_wb = phys_enc->hw_wb; >> +   hw_pp = phys_enc->hw_pp; >> +   hw_ctl = phys_enc->hw_ctl; >> + >> +   DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); >> + >> +   if (!hw_ctl) { >> +       DPU_DEBUG("[wb:%d] no ctl assigned\n", hw_wb->idx - WB_0); >> +       return; >> +   } >> + >> +   if (hw_ctl->ops.update_pending_flush_wb) >> +       hw_ctl->ops.update_pending_flush_wb(hw_ctl, hw_wb->idx); >> + >> +   if (hw_ctl->ops.update_pending_flush_merge_3d && hw_pp && >> hw_pp->merge_3d) >> +       hw_ctl->ops.update_pending_flush_merge_3d(hw_ctl, >> +               hw_pp->merge_3d->idx); >> + >> +   if (hw_ctl->ops.get_pending_flush) >> +       pending_flush = hw_ctl->ops.get_pending_flush(hw_ctl); >> + >> +   DPU_DEBUG("Pending flush mask for CTL_%d is 0x%x, WB %d\n", >> +           hw_ctl->idx - CTL_0, pending_flush, >> +           hw_wb->idx - WB_0); >> +} >> + >> +/** >> + * dpu_encoder_phys_wb_setup - setup writeback encoder >> + * @phys_enc:   Pointer to physical encoder >> + */ >> +static void dpu_encoder_phys_wb_setup( >> +       struct dpu_encoder_phys *phys_enc) >> +{ >> +   struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; >> +   struct drm_display_mode mode = phys_enc->cached_mode; >> +   struct drm_framebuffer *fb = NULL; >> + >> +   DPU_DEBUG("[mode_set:%d, \"%s\",%d,%d]\n", >> +           hw_wb->idx - WB_0, mode.name, >> +           mode.hdisplay, mode.vdisplay); >> + >> +   dpu_encoder_phys_wb_set_ot_limit(phys_enc); >> + >> +   dpu_encoder_phys_wb_set_qos_remap(phys_enc); >> + >> +   dpu_encoder_phys_wb_set_qos(phys_enc); >> + >> +   dpu_encoder_phys_wb_setup_fb(phys_enc, fb); >> + >> +   dpu_encoder_phys_wb_setup_cdp(phys_enc); >> + >> +} >> + >> +static void _dpu_encoder_phys_wb_frame_done_helper(void *arg) >> +{ >> +   struct dpu_encoder_phys *phys_enc = arg; >> +   struct dpu_encoder_phys_wb *wb_enc = >> to_dpu_encoder_phys_wb(phys_enc); >> + >> +   struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; >> +   unsigned long lock_flags; >> +   u32 event = DPU_ENCODER_FRAME_EVENT_DONE; >> + >> +   DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); >> + >> +   if (phys_enc->parent_ops->handle_frame_done) >> +       phys_enc->parent_ops->handle_frame_done(phys_enc->parent, >> +               phys_enc, event); >> + >> +   if (phys_enc->parent_ops->handle_vblank_virt) >> +       phys_enc->parent_ops->handle_vblank_virt(phys_enc->parent, >> +               phys_enc); >> + >> +   spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags); >> +   atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0); >> +   spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags); >> + >> +   if (wb_enc->wb_conn) >> +       drm_writeback_signal_completion(wb_enc->wb_conn, 0); >> + >> +   /* Signal any waiting atomic commit thread */ >> +   wake_up_all(&phys_enc->pending_kickoff_wq); >> +} >> + >> +/** >> + * dpu_encoder_phys_wb_done_irq - writeback interrupt handler >> + * @arg:   Pointer to writeback encoder >> + * @irq_idx:   interrupt index >> + */ >> +static void dpu_encoder_phys_wb_done_irq(void *arg, int irq_idx) >> +{ >> +   _dpu_encoder_phys_wb_frame_done_helper(arg); >> +} >> + >> +/** >> + * dpu_encoder_phys_wb_irq_ctrl - irq control of WB >> + * @phys:   Pointer to physical encoder >> + * @enable:   indicates enable or disable interrupts >> + */ >> +static void dpu_encoder_phys_wb_irq_ctrl( >> +       struct dpu_encoder_phys *phys, bool enable) >> +{ >> + >> +   struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys); >> +   int ret = 0; >> +   int refcount; >> + >> +   refcount = atomic_read(&wb_enc->wbirq_refcount); >> + >> +   if (enable && atomic_inc_return(&wb_enc->wbirq_refcount) == 1) { >> +       dpu_core_irq_register_callback(phys->dpu_kms, >> +               phys->irq[INTR_IDX_WB_DONE], >> dpu_encoder_phys_wb_done_irq, phys); >> +       if (ret) >> +           atomic_dec_return(&wb_enc->wbirq_refcount); >> +   } else if (!enable && >> +           atomic_dec_return(&wb_enc->wbirq_refcount) == 0) { >> +       dpu_core_irq_unregister_callback(phys->dpu_kms, >> phys->irq[INTR_IDX_WB_DONE]); >> +       if (ret) >> +           atomic_inc_return(&wb_enc->wbirq_refcount); >> +   } >> +} >> + >> +static void dpu_encoder_phys_wb_atomic_mode_set( >> +       struct dpu_encoder_phys *phys_enc, >> +       struct drm_crtc_state *crtc_state, >> +       struct drm_connector_state *conn_state) >> +{ >> + >> +   phys_enc->irq[INTR_IDX_WB_DONE] = >> phys_enc->hw_wb->caps->intr_wb_done; >> +} >> + >> +static void _dpu_encoder_phys_wb_handle_wbdone_timeout( >> +       struct dpu_encoder_phys *phys_enc) >> +{ >> +   struct dpu_encoder_phys_wb *wb_enc = >> to_dpu_encoder_phys_wb(phys_enc); >> +   u32 frame_event = DPU_ENCODER_FRAME_EVENT_ERROR; >> + >> +   wb_enc->wb_done_timeout_cnt++; >> + >> +   if (wb_enc->wb_done_timeout_cnt == 1) >> +       msm_disp_snapshot_state(phys_enc->parent->dev); >> + >> +   atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0); >> + >> +   /* request a ctl reset before the next kickoff */ >> +   phys_enc->enable_state = DPU_ENC_ERR_NEEDS_HW_RESET; >> + >> +   if (wb_enc->wb_conn) >> +       drm_writeback_signal_completion(wb_enc->wb_conn, 0); >> + >> +   if (phys_enc->parent_ops->handle_frame_done) >> +       phys_enc->parent_ops->handle_frame_done( >> +               phys_enc->parent, phys_enc, frame_event); >> +} >> + >> +/** >> + * dpu_encoder_phys_wb_wait_for_commit_done - wait until request is >> committed >> + * @phys_enc:   Pointer to physical encoder >> + */ >> +static int dpu_encoder_phys_wb_wait_for_commit_done( >> +       struct dpu_encoder_phys *phys_enc) >> +{ >> +   unsigned long ret; >> +   struct dpu_encoder_wait_info wait_info; >> +   struct dpu_encoder_phys_wb *wb_enc = >> to_dpu_encoder_phys_wb(phys_enc); >> + >> +   wait_info.wq = &phys_enc->pending_kickoff_wq; >> +   wait_info.atomic_cnt = &phys_enc->pending_kickoff_cnt; >> +   wait_info.timeout_ms = KICKOFF_TIMEOUT_MS; >> + >> +   ret = dpu_encoder_helper_wait_for_irq(phys_enc, INTR_IDX_WB_DONE, >> +           dpu_encoder_phys_wb_done_irq, &wait_info); >> +   if (ret == -ETIMEDOUT) >> +       _dpu_encoder_phys_wb_handle_wbdone_timeout(phys_enc); >> +   else if (!ret) >> +       wb_enc->wb_done_timeout_cnt = 0; >> + >> +   return ret; >> +} >> + >> +/** >> + * dpu_encoder_phys_wb_prepare_for_kickoff - pre-kickoff processing >> + * @phys_enc:   Pointer to physical encoder >> + * Returns:   Zero on success >> + */ >> +static void dpu_encoder_phys_wb_prepare_for_kickoff( >> +       struct dpu_encoder_phys *phys_enc) >> +{ >> +   struct dpu_encoder_phys_wb *wb_enc = >> to_dpu_encoder_phys_wb(phys_enc); >> +   struct drm_connector *drm_conn; >> +   struct drm_connector_state *state; >> + >> +   DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); >> + >> +   if (!wb_enc->wb_conn || !wb_enc->wb_job) { >> +       DPU_ERROR("invalid wb_conn or wb_job\n"); >> +       return; >> +   } >> + >> +   drm_conn = &wb_enc->wb_conn->base; >> +   state = drm_conn->state; >> + >> +   if (wb_enc->wb_conn && wb_enc->wb_job) >> +       drm_writeback_queue_job(wb_enc->wb_conn, state); >> + >> +   dpu_encoder_phys_wb_setup(phys_enc); >> + >> +   _dpu_encoder_phys_wb_update_flush(phys_enc); >> +} >> + >> +/** >> + * dpu_encoder_phys_wb_needs_single_flush - trigger flush processing >> + * @phys_enc:   Pointer to physical encoder >> + */ >> +static bool dpu_encoder_phys_wb_needs_single_flush(struct >> dpu_encoder_phys *phys_enc) >> +{ >> +   DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); >> +   return false; >> +} >> + >> +/** >> + * dpu_encoder_phys_wb_handle_post_kickoff - post-kickoff processing >> + * @phys_enc:   Pointer to physical encoder >> + */ >> +static void dpu_encoder_phys_wb_handle_post_kickoff( >> +       struct dpu_encoder_phys *phys_enc) >> +{ >> +   DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); >> + >> +} >> + >> +/** >> + * dpu_encoder_phys_wb_enable - enable writeback encoder >> + * @phys_enc:   Pointer to physical encoder >> + */ >> +static void dpu_encoder_phys_wb_enable(struct dpu_encoder_phys >> *phys_enc) >> +{ >> +   DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); >> +   phys_enc->enable_state = DPU_ENC_ENABLED; >> +} >> +/** >> + * dpu_encoder_phys_wb_disable - disable writeback encoder >> + * @phys_enc:   Pointer to physical encoder >> + */ >> +static void dpu_encoder_phys_wb_disable(struct dpu_encoder_phys >> *phys_enc) >> +{ >> +   struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; >> +   struct dpu_hw_ctl *hw_ctl = phys_enc->hw_ctl; >> + >> +   DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); >> + >> +   if (phys_enc->enable_state == DPU_ENC_DISABLED) { >> +       DPU_ERROR("encoder is already disabled\n"); >> +       return; >> +   } >> + >> +   /* reset h/w before final flush */ >> +   if (phys_enc->hw_ctl->ops.clear_pending_flush) >> +       phys_enc->hw_ctl->ops.clear_pending_flush(phys_enc->hw_ctl); >> + >> +   /* >> +    * New CTL reset sequence from 5.0 MDP onwards. >> +    * If has_3d_merge_reset is not set, legacy reset >> +    * sequence is executed. >> +    * >> +    * Legacy reset sequence has not been implemented yet. >> +    * Any target earlier than SM8150 will need it and when >> +    * WB support is added to those targets will need to add >> +    * the legacy teardown sequence as well. >> +    */ >> +   if (hw_ctl->caps->features & BIT(DPU_CTL_ACTIVE_CFG)) >> +       dpu_encoder_helper_phys_cleanup(phys_enc); >> + >> +   phys_enc->enable_state = DPU_ENC_DISABLED; >> +} >> + >> +/** >> + * dpu_encoder_phys_wb_destroy - destroy writeback encoder >> + * @phys_enc:   Pointer to physical encoder >> + */ >> +static void dpu_encoder_phys_wb_destroy(struct dpu_encoder_phys >> *phys_enc) >> +{ >> +   DPU_DEBUG("[wb:%d]\n", phys_enc->intf_idx - INTF_0); >> + >> +   if (!phys_enc) >> +       return; >> + >> +   kfree(phys_enc); >> +} >> + >> +static void dpu_encoder_phys_wb_prepare_wb_job(struct >> dpu_encoder_phys *phys_enc, >> +       struct drm_writeback_job *job) >> +{ >> +   const struct msm_format *format; >> +   struct msm_gem_address_space *aspace; >> +   struct dpu_hw_wb_cfg *wb_cfg; >> +   int ret; >> +   struct dpu_encoder_phys_wb *wb_enc = >> to_dpu_encoder_phys_wb(phys_enc); >> + >> +   if (!job->fb) >> +       return; >> + >> +   wb_enc->wb_job = job; >> +   wb_enc->wb_conn = job->connector; >> +   aspace = phys_enc->dpu_kms->base.aspace; >> + >> +   wb_cfg = &wb_enc->wb_cfg; >> + >> +   memset(wb_cfg, 0, sizeof(struct dpu_hw_wb_cfg)); >> + >> +   ret = msm_framebuffer_prepare(job->fb, aspace, false); >> +   if (ret) { >> +       DPU_ERROR("prep fb failed, %d\n", ret); >> +       return; >> +   } >> + >> +   format = msm_framebuffer_format(job->fb); >> + >> +   wb_cfg->dest.format = dpu_get_dpu_format_ext( >> +           format->pixel_format, job->fb->modifier); >> +   if (!wb_cfg->dest.format) { >> +       /* this error should be detected during atomic_check */ >> +       DPU_ERROR("failed to get format %x\n", format->pixel_format); >> +       return; >> +   } >> + >> +   ret = dpu_format_populate_layout(aspace, job->fb, &wb_cfg->dest); >> +   if (ret) { >> +       DPU_DEBUG("failed to populate layout %d\n", ret); >> +       return; >> +   } >> + >> +   wb_cfg->dest.width = job->fb->width; >> +   wb_cfg->dest.height = job->fb->height; >> +   wb_cfg->dest.num_planes = wb_cfg->dest.format->num_planes; >> + >> +   if ((wb_cfg->dest.format->fetch_planes == DPU_PLANE_PLANAR) && >> +           (wb_cfg->dest.format->element[0] == C1_B_Cb)) >> +       swap(wb_cfg->dest.plane_addr[1], wb_cfg->dest.plane_addr[2]); >> + >> +   DPU_DEBUG("[fb_offset:%8.8x,%8.8x,%8.8x,%8.8x]\n", >> +           wb_cfg->dest.plane_addr[0], wb_cfg->dest.plane_addr[1], >> +           wb_cfg->dest.plane_addr[2], wb_cfg->dest.plane_addr[3]); >> + >> +   DPU_DEBUG("[fb_stride:%8.8x,%8.8x,%8.8x,%8.8x]\n", >> +           wb_cfg->dest.plane_pitch[0], wb_cfg->dest.plane_pitch[1], >> +           wb_cfg->dest.plane_pitch[2], wb_cfg->dest.plane_pitch[3]); >> +} >> + >> +static void dpu_encoder_phys_wb_cleanup_wb_job(struct >> dpu_encoder_phys *phys_enc, >> +       struct drm_writeback_job *job) >> +{ >> +   struct dpu_encoder_phys_wb *wb_enc = >> to_dpu_encoder_phys_wb(phys_enc); >> +   struct msm_gem_address_space *aspace; >> + >> +   if (!job->fb) >> +       return; >> + >> +   aspace = phys_enc->dpu_kms->base.aspace; >> + >> +   msm_framebuffer_cleanup(job->fb, aspace, false); >> +   wb_enc->wb_job = NULL; >> +   wb_enc->wb_conn = NULL; >> +} >> + >> +/** >> + * dpu_encoder_phys_wb_init_ops - initialize writeback operations >> + * @ops:   Pointer to encoder operation table >> + */ >> +static void dpu_encoder_phys_wb_init_ops(struct dpu_encoder_phys_ops >> *ops) >> +{ >> +   ops->is_master = dpu_encoder_phys_wb_is_master; >> +   ops->atomic_mode_set = dpu_encoder_phys_wb_atomic_mode_set; >> +   ops->enable = dpu_encoder_phys_wb_enable; >> +   ops->disable = dpu_encoder_phys_wb_disable; >> +   ops->destroy = dpu_encoder_phys_wb_destroy; >> +   ops->atomic_check = dpu_encoder_phys_wb_atomic_check; >> +   ops->wait_for_commit_done = >> dpu_encoder_phys_wb_wait_for_commit_done; >> +   ops->prepare_for_kickoff = dpu_encoder_phys_wb_prepare_for_kickoff; >> +   ops->handle_post_kickoff = dpu_encoder_phys_wb_handle_post_kickoff; >> +   ops->needs_single_flush = dpu_encoder_phys_wb_needs_single_flush; >> +   ops->trigger_start = dpu_encoder_helper_trigger_start; >> +   ops->prepare_wb_job = dpu_encoder_phys_wb_prepare_wb_job; >> +   ops->cleanup_wb_job = dpu_encoder_phys_wb_cleanup_wb_job; >> +   ops->irq_control = dpu_encoder_phys_wb_irq_ctrl; >> +} >> + >> +/** >> + * dpu_encoder_phys_wb_init - initialize writeback encoder >> + * @init:   Pointer to init info structure with initialization params >> + */ >> +struct dpu_encoder_phys *dpu_encoder_phys_wb_init( >> +       struct dpu_enc_phys_init_params *p) >> +{ >> +   struct dpu_encoder_phys *phys_enc = NULL; >> +   struct dpu_encoder_phys_wb *wb_enc = NULL; >> +   int ret = 0; >> +   int i; >> + >> +   DPU_DEBUG("\n"); >> + >> +   if (!p || !p->parent) { >> +       DPU_ERROR("invalid params\n"); >> +       ret = -EINVAL; >> +       goto fail_alloc; >> +   } >> + >> +   wb_enc = kzalloc(sizeof(*wb_enc), GFP_KERNEL); >> +   if (!wb_enc) { >> +       DPU_ERROR("failed to allocate wb phys_enc enc\n"); >> +       ret = -ENOMEM; >> +       goto fail_alloc; >> +   } >> + >> +   phys_enc = &wb_enc->base; >> +   phys_enc->hw_mdptop = p->dpu_kms->hw_mdp; >> +   phys_enc->intf_idx = p->intf_idx; >> + >> +   dpu_encoder_phys_wb_init_ops(&phys_enc->ops); >> +   phys_enc->parent = p->parent; >> +   phys_enc->parent_ops = p->parent_ops; >> +   phys_enc->dpu_kms = p->dpu_kms; >> +   phys_enc->split_role = p->split_role; >> +   phys_enc->intf_mode = INTF_MODE_WB_LINE; >> +   phys_enc->intf_idx = p->intf_idx; >> +   phys_enc->enc_spinlock = p->enc_spinlock; >> + >> +   atomic_set(&wb_enc->wbirq_refcount, 0); >> + >> +   for (i = 0; i < ARRAY_SIZE(phys_enc->irq); i++) >> +       phys_enc->irq[i] = -EINVAL; >> + >> +   atomic_set(&phys_enc->pending_kickoff_cnt, 0); >> +   atomic_set(&phys_enc->vblank_refcount, 0); >> +   wb_enc->wb_done_timeout_cnt = 0; >> + >> +   init_waitqueue_head(&phys_enc->pending_kickoff_wq); >> +   phys_enc->enable_state = DPU_ENC_DISABLED; >> + >> +   DPU_DEBUG("Created dpu_encoder_phys for wb %d\n", >> +           phys_enc->intf_idx); >> + >> +   return phys_enc; >> + >> +fail_alloc: >> +   return ERR_PTR(ret); >> +} > >
On 20/04/2022 21:17, Abhinav Kumar wrote: > > > On 4/20/2022 12:49 AM, Dmitry Baryshkov wrote: >> On 20/04/2022 04:46, Abhinav Kumar wrote: >>> Introduce the dpu_encoder_phys_* for the writeback interface >>> to handle writeback specific hardware programming. >>> >>> changes in v2: >>>     - rebase on msm-next and fix related dependencies namely >>>      the irq cleanup >>>     - move cdp_cfg, aspace out of dpu_encoder_phys_wb >>>     - leave a comment about wb master >>>     - start using _dpu_hw_get_qos_lut from dpu_hw_util >>>     - replace hw_pp->merge_3d check with DPU_CTL_ACTIVE_CFG >>> >>> Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> >>> --- >>>  drivers/gpu/drm/msm/Makefile                      |  1 + >>>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h  | 30 + >>>  .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c   | 751 >>> +++++++++++++++++++++ >>>  3 files changed, 782 insertions(+) >>>  create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c >>> >>> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile >>> index ca779c1..0387f22 100644 >>> --- a/drivers/gpu/drm/msm/Makefile >>> +++ b/drivers/gpu/drm/msm/Makefile >>> @@ -60,6 +60,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \ >>>      disp/dpu1/dpu_encoder.o \ >>>      disp/dpu1/dpu_encoder_phys_cmd.o \ >>>      disp/dpu1/dpu_encoder_phys_vid.o \ >>> +   disp/dpu1/dpu_encoder_phys_wb.o \ >>>      disp/dpu1/dpu_formats.o \ >>>      disp/dpu1/dpu_hw_catalog.o \ >>>      disp/dpu1/dpu_hw_ctl.o \ >>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h >>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h >>> index 00951f3..5452f98 100644 >>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h >>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h >>> @@ -150,6 +150,7 @@ struct dpu_encoder_phys_ops { >>>   * @INTR_IDX_PINGPONG: Pingpong done unterrupt for cmd mode panel >>>   * @INTR_IDX_UNDERRUN: Underrun unterrupt for video and cmd mode panel >>>   * @INTR_IDX_RDPTR:   Readpointer done unterrupt for cmd mode panel >>> + * @INTR_IDX_WB_DONE: Writeback fone interrupt for virtual connector >>>   */ >>>  enum dpu_intr_idx { >>>      INTR_IDX_VSYNC, >>> @@ -157,6 +158,7 @@ enum dpu_intr_idx { >>>      INTR_IDX_UNDERRUN, >>>      INTR_IDX_CTL_START, >>>      INTR_IDX_RDPTR, >>> +   INTR_IDX_WB_DONE, >>>      INTR_IDX_MAX, >>>  }; >>> @@ -224,6 +226,27 @@ static inline int >>> dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys) >>>  } >>>  /** >>> + * struct dpu_encoder_phys_wb - sub-class of dpu_encoder_phys to >>> handle command >>> + *   mode specific operations >>> + * @base:   Baseclass physical encoder structure >>> + * @wbirq_refcount:    Reference count of writeback interrupt >>> + * @wb_done_timeout_cnt: number of wb done irq timeout errors >>> + * @wb_cfg: writeback block config to store fb related details >>> + * @wb_conn: backpointer to writeback connector >>> + * @wb_job: backpointer to current writeback job >>> + * @dest:  dpu buffer layout for current writeback output buffer >>> + */ >>> +struct dpu_encoder_phys_wb { >>> +   struct dpu_encoder_phys base; >>> +   atomic_t wbirq_refcount; >>> +   int wb_done_timeout_cnt; >>> +   struct dpu_hw_wb_cfg wb_cfg; >>> +   struct drm_writeback_connector *wb_conn; >>> +   struct drm_writeback_job *wb_job; >>> +   struct dpu_hw_fmt_layout dest; >>> +}; >>> + >>> +/** >>>   * struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to >>> handle command >>>   *   mode specific operations >>>   * @base:   Baseclass physical encoder structure >>> @@ -291,6 +314,13 @@ struct dpu_encoder_phys *dpu_encoder_phys_cmd_init( >>>          struct dpu_enc_phys_init_params *p); >>>  /** >>> + * dpu_encoder_phys_wb_init - initialize writeback encoder >>> + * @init:   Pointer to init info structure with initialization params >>> + */ >>> +struct dpu_encoder_phys *dpu_encoder_phys_wb_init( >>> +       struct dpu_enc_phys_init_params *p); >>> + >>> +/** >>>   * dpu_encoder_helper_trigger_start - control start helper function >>>   *   This helper function may be optionally specified by physical >>>   *   encoders if they require ctl_start triggering. >>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c >>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c >>> new file mode 100644 >>> index 0000000..128317fe >>> --- /dev/null >>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c >>> @@ -0,0 +1,751 @@ >>> +// SPDX-License-Identifier: GPL-2.0-only >>> +/* >>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights >>> reserved. >>> + */ >>> + >>> +#define pr_fmt(fmt)   "[drm:%s:%d] " fmt, __func__, __LINE__ >>> + >>> +#include <linux/debugfs.h> >>> + >>> +#include "dpu_encoder_phys.h" >>> +#include "dpu_formats.h" >>> +#include "dpu_hw_top.h" >>> +#include "dpu_hw_wb.h" >>> +#include "dpu_hw_lm.h" >>> +#include "dpu_hw_blk.h" >>> +#include "dpu_hw_merge3d.h" >>> +#include "dpu_hw_interrupts.h" >>> +#include "dpu_core_irq.h" >>> +#include "dpu_vbif.h" >>> +#include "dpu_crtc.h" >>> +#include "disp/msm_disp_snapshot.h" >>> + >>> +#define DEFAULT_MAX_WRITEBACK_WIDTH 2048 >>> + >>> +#define to_dpu_encoder_phys_wb(x) \ >>> +   container_of(x, struct dpu_encoder_phys_wb, base) >>> + >>> +/** >>> + * dpu_encoder_phys_wb_is_master - report wb always as master encoder >>> + */ >>> +static bool dpu_encoder_phys_wb_is_master(struct dpu_encoder_phys >>> *phys_enc) >>> +{ >>> +   /* there is only one physical enc for dpu_writeback */ >>> +   return true; >>> +} >>> + >>> +/** >>> + * dpu_encoder_phys_wb_set_ot_limit - set OT limit for writeback >>> interface >>> + * @phys_enc:   Pointer to physical encoder >>> + */ >>> +static void dpu_encoder_phys_wb_set_ot_limit( >>> +       struct dpu_encoder_phys *phys_enc) >>> +{ >>> +   struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; >>> +   struct dpu_vbif_set_ot_params ot_params; >>> + >>> +   memset(&ot_params, 0, sizeof(ot_params)); >>> +   ot_params.xin_id = hw_wb->caps->xin_id; >>> +   ot_params.num = hw_wb->idx - WB_0; >>> +   ot_params.width = phys_enc->cached_mode.hdisplay; >>> +   ot_params.height = phys_enc->cached_mode.vdisplay; >>> +   ot_params.is_wfd = true; >>> +   ot_params.frame_rate = drm_mode_vrefresh(&phys_enc->cached_mode); >>> +   ot_params.vbif_idx = hw_wb->caps->vbif_idx; >>> +   ot_params.clk_ctrl = hw_wb->caps->clk_ctrl; >>> +   ot_params.rd = false; >>> + >>> +   dpu_vbif_set_ot_limit(phys_enc->dpu_kms, &ot_params); >>> +} >>> + >>> +/** >>> + * dpu_encoder_phys_wb_set_qos_remap - set QoS remapper for writeback >>> + * @phys_enc:   Pointer to physical encoder >>> + */ >>> +static void dpu_encoder_phys_wb_set_qos_remap( >>> +       struct dpu_encoder_phys *phys_enc) >>> +{ >>> +   struct dpu_hw_wb *hw_wb; >>> +   struct dpu_vbif_set_qos_params qos_params; >>> + >>> +   if (!phys_enc || !phys_enc->parent || !phys_enc->parent->crtc) { >>> +       DPU_ERROR("invalid arguments\n"); >>> +       return; >>> +   } >>> + >>> +   if (!phys_enc->hw_wb || !phys_enc->hw_wb->caps) { >>> +       DPU_ERROR("invalid writeback hardware\n"); >>> +       return; >>> +   } >>> + >>> +   hw_wb = phys_enc->hw_wb; >>> + >>> +   memset(&qos_params, 0, sizeof(qos_params)); >>> +   qos_params.vbif_idx = hw_wb->caps->vbif_idx; >>> +   qos_params.xin_id = hw_wb->caps->xin_id; >>> +   qos_params.clk_ctrl = hw_wb->caps->clk_ctrl; >>> +   qos_params.num = hw_wb->idx - WB_0; >>> +   qos_params.is_rt = false; >>> + >>> +   DPU_DEBUG("[qos_remap] wb:%d vbif:%d xin:%d is_rt:%d\n", >>> +           qos_params.num, >>> +           qos_params.vbif_idx, >>> +           qos_params.xin_id, qos_params.is_rt); >>> + >>> +   dpu_vbif_set_qos_remap(phys_enc->dpu_kms, &qos_params); >>> +} >>> + >>> +/** >>> + * dpu_encoder_phys_wb_set_qos - set QoS/danger/safe LUTs for writeback >>> + * @phys_enc:   Pointer to physical encoder >>> + */ >>> +static void dpu_encoder_phys_wb_set_qos(struct dpu_encoder_phys >>> *phys_enc) >>> +{ >>> +   struct dpu_hw_wb *hw_wb; >>> +   struct dpu_hw_wb_qos_cfg qos_cfg; >>> +   struct dpu_mdss_cfg *catalog; >>> +   struct dpu_qos_lut_tbl *qos_lut_tb; >>> + >>> +   if (!phys_enc || !phys_enc->dpu_kms || >>> !phys_enc->dpu_kms->catalog) { >>> +       DPU_ERROR("invalid parameter(s)\n"); >>> +       return; >>> +   } >>> + >>> +   catalog = phys_enc->dpu_kms->catalog; >>> + >>> +   hw_wb = phys_enc->hw_wb; >>> + >>> +   memset(&qos_cfg, 0, sizeof(struct dpu_hw_wb_qos_cfg)); >>> +   qos_cfg.danger_safe_en = true; >>> +   qos_cfg.danger_lut = >>> +       catalog->perf.danger_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; >>> + >>> +   qos_cfg.safe_lut = >>> catalog->perf.safe_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; >>> + >>> +   qos_lut_tb = &catalog->perf.qos_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; >>> +   qos_cfg.creq_lut = _dpu_hw_get_qos_lut(qos_lut_tb, 0); >>> + >>> +   if (hw_wb->ops.setup_qos_lut) >>> +       hw_wb->ops.setup_qos_lut(hw_wb, &qos_cfg); >>> +} >>> + >>> +/** >>> + * dpu_encoder_phys_wb_setup_fb - setup output framebuffer >>> + * @phys_enc:   Pointer to physical encoder >>> + * @fb:       Pointer to output framebuffer >>> + * @wb_roi:   Pointer to output region of interest >>> + */ >>> +static void dpu_encoder_phys_wb_setup_fb(struct dpu_encoder_phys >>> *phys_enc, >>> +       struct drm_framebuffer *fb) >>> +{ >>> +   struct dpu_encoder_phys_wb *wb_enc = >>> to_dpu_encoder_phys_wb(phys_enc); >>> +   struct dpu_hw_wb *hw_wb; >>> +   struct dpu_hw_wb_cfg *wb_cfg; >>> +   struct dpu_hw_wb_cdp_cfg cdp_cfg; >>> + >>> +   if (!phys_enc || !phys_enc->dpu_kms || >>> !phys_enc->dpu_kms->catalog) { >>> +       DPU_ERROR("invalid encoder\n"); >>> +       return; >>> +   } >>> + >>> +   hw_wb = phys_enc->hw_wb; >>> +   wb_cfg = &wb_enc->wb_cfg; >>> + >>> +   wb_cfg->intf_mode = phys_enc->intf_mode; >>> +   wb_cfg->roi.x1 = 0; >>> +   wb_cfg->roi.x2 = phys_enc->cached_mode.hdisplay; >>> +   wb_cfg->roi.y1 = 0; >>> +   wb_cfg->roi.y2 = phys_enc->cached_mode.vdisplay; >>> + >>> +   if (hw_wb->ops.setup_roi) >>> +       hw_wb->ops.setup_roi(hw_wb, wb_cfg); >>> + >>> +   if (hw_wb->ops.setup_outformat) >>> +       hw_wb->ops.setup_outformat(hw_wb, wb_cfg); >>> + >>> +   if (hw_wb->ops.setup_cdp) { >>> +       memset(&cdp_cfg, 0, sizeof(struct dpu_hw_wb_cdp_cfg)); >>> + >>> +       cdp_cfg.enable = phys_enc->dpu_kms->catalog->perf.cdp_cfg >>> +               [DPU_PERF_CDP_USAGE_NRT].wr_enable; >>> +       cdp_cfg.ubwc_meta_enable = >>> +               DPU_FORMAT_IS_UBWC(wb_cfg->dest.format); >>> +       cdp_cfg.tile_amortize_enable = >>> +               DPU_FORMAT_IS_UBWC(wb_cfg->dest.format) || >>> +               DPU_FORMAT_IS_TILE(wb_cfg->dest.format); >>> +       cdp_cfg.preload_ahead = DPU_WB_CDP_PRELOAD_AHEAD_64; >>> + >>> +       hw_wb->ops.setup_cdp(hw_wb, &cdp_cfg); >>> +   } >>> + >>> +   if (hw_wb->ops.setup_outaddress) >>> +       hw_wb->ops.setup_outaddress(hw_wb, wb_cfg); >>> +} >>> + >>> +/** >>> + * dpu_encoder_phys_wb_setup_cdp - setup chroma down prefetch block >>> + * @phys_enc:Pointer to physical encoder >>> + */ >>> +static void dpu_encoder_phys_wb_setup_cdp(struct dpu_encoder_phys >>> *phys_enc) >>> +{ >>> +   struct dpu_hw_wb *hw_wb; >>> +   struct dpu_hw_ctl *ctl; >>> + >>> +   if (!phys_enc) { >>> +       DPU_ERROR("invalid encoder\n"); >>> +       return; >>> +   } >>> + >>> +   hw_wb = phys_enc->hw_wb; >>> +   ctl = phys_enc->hw_ctl; >>> + >>> +   if (test_bit(DPU_CTL_ACTIVE_CFG, &ctl->caps->features) && >>> +       (phys_enc->hw_ctl && >>> +        phys_enc->hw_ctl->ops.setup_intf_cfg)) { >>> +       struct dpu_hw_intf_cfg intf_cfg = {0}; >>> +       struct dpu_hw_pingpong *hw_pp = phys_enc->hw_pp; >>> +       enum dpu_3d_blend_mode mode_3d; >>> + >>> +       mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc); >>> + >>> +       intf_cfg.intf = DPU_NONE; >>> +       intf_cfg.wb = hw_wb->idx; >>> + >>> +       if (mode_3d && hw_pp && hw_pp->merge_3d) >>> +           intf_cfg.merge_3d = hw_pp->merge_3d->idx; >>> + >>> +       if (phys_enc->hw_pp->merge_3d && >>> phys_enc->hw_pp->merge_3d->ops.setup_3d_mode) >>> + >>> phys_enc->hw_pp->merge_3d->ops.setup_3d_mode(phys_enc->hw_pp->merge_3d, >>> +                   mode_3d); >>> + >>> +       /* setup which pp blk will connect to this wb */ >>> +       if (hw_pp && phys_enc->hw_wb->ops.bind_pingpong_blk) >>> +           phys_enc->hw_wb->ops.bind_pingpong_blk(phys_enc->hw_wb, >>> true, >>> +                   phys_enc->hw_pp->idx); >>> + >>> +       phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl, >>> &intf_cfg); >>> +   } else if (phys_enc->hw_ctl && >>> phys_enc->hw_ctl->ops.setup_intf_cfg) { >>> +       struct dpu_hw_intf_cfg intf_cfg = {0}; >>> + >>> +       intf_cfg.intf = DPU_NONE; >>> +       intf_cfg.wb = hw_wb->idx; >>> +       intf_cfg.mode_3d = >>> +           dpu_encoder_helper_get_3d_blend_mode(phys_enc); >>> +       phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl, >>> &intf_cfg); >>> +   } >>> +} >>> + >>> +/** >>> + * dpu_encoder_phys_wb_atomic_check - verify and fixup given atomic >>> states >>> + * @phys_enc:   Pointer to physical encoder >>> + * @crtc_state:   Pointer to CRTC atomic state >>> + * @conn_state:   Pointer to connector atomic state >>> + */ >>> +static int dpu_encoder_phys_wb_atomic_check( >>> +       struct dpu_encoder_phys *phys_enc, >>> +       struct drm_crtc_state *crtc_state, >>> +       struct drm_connector_state *conn_state) >>> +{ >>> +   struct drm_framebuffer *fb; >>> +   const struct drm_display_mode *mode; >>> + >>> +   DPU_DEBUG("[atomic_check:%d, \"%s\",%d,%d]\n", >>> +           phys_enc->intf_idx, mode->name, mode->hdisplay, >>> mode->vdisplay); >>> + >>> +   if (!conn_state->writeback_job || !conn_state->writeback_job->fb) >>> +       return 0; >>> + >>> +   fb = conn_state->writeback_job->fb; >>> +   mode = &crtc_state->mode; >>> + >>> +   if (!conn_state || !conn_state->connector) { >>> +       DPU_ERROR("invalid connector state\n"); >>> +       return -EINVAL; >>> +   } else if (conn_state->connector->status != >>> +           connector_status_connected) { >>> +       DPU_ERROR("connector not connected %d\n", >>> +               conn_state->connector->status); >>> +       return -EINVAL; >>> +   } >>> + >>> +   DPU_DEBUG("[fb_id:%u][fb:%u,%u]\n", fb->base.id, >>> +           fb->width, fb->height); >>> + >>> +   if (fb->width != mode->hdisplay) { >>> +       DPU_ERROR("invalid fb w=%d, mode w=%d\n", fb->width, >>> +               mode->hdisplay); >>> +       return -EINVAL; >>> +   } else if (fb->height != mode->vdisplay) { >>> +       DPU_ERROR("invalid fb h=%d, mode h=%d\n", fb->height, >>> +                 mode->vdisplay); >>> +       return -EINVAL; >>> +   } else if (fb->width > DEFAULT_MAX_WRITEBACK_WIDTH) { >>> +       DPU_ERROR("invalid fb w=%d, maxlinewidth=%u\n", >>> +                 fb->width, DEFAULT_MAX_WRITEBACK_WIDTH); >>> +       return -EINVAL; >>> +   } >> >> Being not an expert in the DRM WB API, I have a question: are those >> hardware limitations or the DRM requirement that we can not write to >> the region inside the attached FB? > > Both. The first two checks are indeed DRM requirement and infact igt > writeback tests this to ensure that the driver rejects any invalid FBs > which are not equal to the mode that was set. > > https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/blob/master/tests/kms_writeback.c#L409 The test is writing to the fb which is smaller than the used video mode (which is an obvious mistake). Is it correst to write back to the FB that is bigger than the selected resolution? > The last check is coming from our hardware > >> >>> + >>> +   return 0; >>> +} >>> + >>> + >>> +/** >>> + * _dpu_encoder_phys_wb_update_flush - flush hardware update >>> + * @phys_enc:   Pointer to physical encoder >>> + */ >>> +static void _dpu_encoder_phys_wb_update_flush(struct >>> dpu_encoder_phys *phys_enc) >>> +{ >>> +   struct dpu_hw_wb *hw_wb; >>> +   struct dpu_hw_ctl *hw_ctl; >>> +   struct dpu_hw_pingpong *hw_pp; >>> +   u32 pending_flush = 0; >>> + >>> +   if (!phys_enc) >>> +       return; >>> + >>> +   hw_wb = phys_enc->hw_wb; >>> +   hw_pp = phys_enc->hw_pp; >>> +   hw_ctl = phys_enc->hw_ctl; >>> + >>> +   DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); >>> + >>> +   if (!hw_ctl) { >>> +       DPU_DEBUG("[wb:%d] no ctl assigned\n", hw_wb->idx - WB_0); >>> +       return; >>> +   } >>> + >>> +   if (hw_ctl->ops.update_pending_flush_wb) >>> +       hw_ctl->ops.update_pending_flush_wb(hw_ctl, hw_wb->idx); >>> + >>> +   if (hw_ctl->ops.update_pending_flush_merge_3d && hw_pp && >>> hw_pp->merge_3d) >>> +       hw_ctl->ops.update_pending_flush_merge_3d(hw_ctl, >>> +               hw_pp->merge_3d->idx); >>> + >>> +   if (hw_ctl->ops.get_pending_flush) >>> +       pending_flush = hw_ctl->ops.get_pending_flush(hw_ctl); >>> + >>> +   DPU_DEBUG("Pending flush mask for CTL_%d is 0x%x, WB %d\n", >>> +           hw_ctl->idx - CTL_0, pending_flush, >>> +           hw_wb->idx - WB_0); >>> +} >>> + >>> +/** >>> + * dpu_encoder_phys_wb_setup - setup writeback encoder >>> + * @phys_enc:   Pointer to physical encoder >>> + */ >>> +static void dpu_encoder_phys_wb_setup( >>> +       struct dpu_encoder_phys *phys_enc) >>> +{ >>> +   struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; >>> +   struct drm_display_mode mode = phys_enc->cached_mode; >>> +   struct drm_framebuffer *fb = NULL; >>> + >>> +   DPU_DEBUG("[mode_set:%d, \"%s\",%d,%d]\n", >>> +           hw_wb->idx - WB_0, mode.name, >>> +           mode.hdisplay, mode.vdisplay); >>> + >>> +   dpu_encoder_phys_wb_set_ot_limit(phys_enc); >>> + >>> +   dpu_encoder_phys_wb_set_qos_remap(phys_enc); >>> + >>> +   dpu_encoder_phys_wb_set_qos(phys_enc); >>> + >>> +   dpu_encoder_phys_wb_setup_fb(phys_enc, fb); >>> + >>> +   dpu_encoder_phys_wb_setup_cdp(phys_enc); >>> + >>> +} >>> + >>> +static void _dpu_encoder_phys_wb_frame_done_helper(void *arg) >>> +{ >>> +   struct dpu_encoder_phys *phys_enc = arg; >>> +   struct dpu_encoder_phys_wb *wb_enc = >>> to_dpu_encoder_phys_wb(phys_enc); >>> + >>> +   struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; >>> +   unsigned long lock_flags; >>> +   u32 event = DPU_ENCODER_FRAME_EVENT_DONE; >>> + >>> +   DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); >>> + >>> +   if (phys_enc->parent_ops->handle_frame_done) >>> +       phys_enc->parent_ops->handle_frame_done(phys_enc->parent, >>> +               phys_enc, event); >>> + >>> +   if (phys_enc->parent_ops->handle_vblank_virt) >>> +       phys_enc->parent_ops->handle_vblank_virt(phys_enc->parent, >>> +               phys_enc); >>> + >>> +   spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags); >>> +   atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0); >>> +   spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags); >>> + >>> +   if (wb_enc->wb_conn) >>> +       drm_writeback_signal_completion(wb_enc->wb_conn, 0); >>> + >>> +   /* Signal any waiting atomic commit thread */ >>> +   wake_up_all(&phys_enc->pending_kickoff_wq); >>> +} >>> + >>> +/** >>> + * dpu_encoder_phys_wb_done_irq - writeback interrupt handler >>> + * @arg:   Pointer to writeback encoder >>> + * @irq_idx:   interrupt index >>> + */ >>> +static void dpu_encoder_phys_wb_done_irq(void *arg, int irq_idx) >>> +{ >>> +   _dpu_encoder_phys_wb_frame_done_helper(arg); >>> +} >>> + >>> +/** >>> + * dpu_encoder_phys_wb_irq_ctrl - irq control of WB >>> + * @phys:   Pointer to physical encoder >>> + * @enable:   indicates enable or disable interrupts >>> + */ >>> +static void dpu_encoder_phys_wb_irq_ctrl( >>> +       struct dpu_encoder_phys *phys, bool enable) >>> +{ >>> + >>> +   struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys); >>> +   int ret = 0; >>> +   int refcount; >>> + >>> +   refcount = atomic_read(&wb_enc->wbirq_refcount); >>> + >>> +   if (enable && atomic_inc_return(&wb_enc->wbirq_refcount) == 1) { >>> +       dpu_core_irq_register_callback(phys->dpu_kms, >>> +               phys->irq[INTR_IDX_WB_DONE], >>> dpu_encoder_phys_wb_done_irq, phys); >>> +       if (ret) >>> +           atomic_dec_return(&wb_enc->wbirq_refcount); >>> +   } else if (!enable && >>> +           atomic_dec_return(&wb_enc->wbirq_refcount) == 0) { >>> +       dpu_core_irq_unregister_callback(phys->dpu_kms, >>> phys->irq[INTR_IDX_WB_DONE]); >>> +       if (ret) >>> +           atomic_inc_return(&wb_enc->wbirq_refcount); >>> +   } >>> +} >>> + >>> +static void dpu_encoder_phys_wb_atomic_mode_set( >>> +       struct dpu_encoder_phys *phys_enc, >>> +       struct drm_crtc_state *crtc_state, >>> +       struct drm_connector_state *conn_state) >>> +{ >>> + >>> +   phys_enc->irq[INTR_IDX_WB_DONE] = >>> phys_enc->hw_wb->caps->intr_wb_done; >>> +} >>> + >>> +static void _dpu_encoder_phys_wb_handle_wbdone_timeout( >>> +       struct dpu_encoder_phys *phys_enc) >>> +{ >>> +   struct dpu_encoder_phys_wb *wb_enc = >>> to_dpu_encoder_phys_wb(phys_enc); >>> +   u32 frame_event = DPU_ENCODER_FRAME_EVENT_ERROR; >>> + >>> +   wb_enc->wb_done_timeout_cnt++; >>> + >>> +   if (wb_enc->wb_done_timeout_cnt == 1) >>> +       msm_disp_snapshot_state(phys_enc->parent->dev); >>> + >>> +   atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0); >>> + >>> +   /* request a ctl reset before the next kickoff */ >>> +   phys_enc->enable_state = DPU_ENC_ERR_NEEDS_HW_RESET; >>> + >>> +   if (wb_enc->wb_conn) >>> +       drm_writeback_signal_completion(wb_enc->wb_conn, 0); >>> + >>> +   if (phys_enc->parent_ops->handle_frame_done) >>> +       phys_enc->parent_ops->handle_frame_done( >>> +               phys_enc->parent, phys_enc, frame_event); >>> +} >>> + >>> +/** >>> + * dpu_encoder_phys_wb_wait_for_commit_done - wait until request is >>> committed >>> + * @phys_enc:   Pointer to physical encoder >>> + */ >>> +static int dpu_encoder_phys_wb_wait_for_commit_done( >>> +       struct dpu_encoder_phys *phys_enc) >>> +{ >>> +   unsigned long ret; >>> +   struct dpu_encoder_wait_info wait_info; >>> +   struct dpu_encoder_phys_wb *wb_enc = >>> to_dpu_encoder_phys_wb(phys_enc); >>> + >>> +   wait_info.wq = &phys_enc->pending_kickoff_wq; >>> +   wait_info.atomic_cnt = &phys_enc->pending_kickoff_cnt; >>> +   wait_info.timeout_ms = KICKOFF_TIMEOUT_MS; >>> + >>> +   ret = dpu_encoder_helper_wait_for_irq(phys_enc, INTR_IDX_WB_DONE, >>> +           dpu_encoder_phys_wb_done_irq, &wait_info); >>> +   if (ret == -ETIMEDOUT) >>> +       _dpu_encoder_phys_wb_handle_wbdone_timeout(phys_enc); >>> +   else if (!ret) >>> +       wb_enc->wb_done_timeout_cnt = 0; >>> + >>> +   return ret; >>> +} >>> + >>> +/** >>> + * dpu_encoder_phys_wb_prepare_for_kickoff - pre-kickoff processing >>> + * @phys_enc:   Pointer to physical encoder >>> + * Returns:   Zero on success >>> + */ >>> +static void dpu_encoder_phys_wb_prepare_for_kickoff( >>> +       struct dpu_encoder_phys *phys_enc) >>> +{ >>> +   struct dpu_encoder_phys_wb *wb_enc = >>> to_dpu_encoder_phys_wb(phys_enc); >>> +   struct drm_connector *drm_conn; >>> +   struct drm_connector_state *state; >>> + >>> +   DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); >>> + >>> +   if (!wb_enc->wb_conn || !wb_enc->wb_job) { >>> +       DPU_ERROR("invalid wb_conn or wb_job\n"); >>> +       return; >>> +   } >>> + >>> +   drm_conn = &wb_enc->wb_conn->base; >>> +   state = drm_conn->state; >>> + >>> +   if (wb_enc->wb_conn && wb_enc->wb_job) >>> +       drm_writeback_queue_job(wb_enc->wb_conn, state); >>> + >>> +   dpu_encoder_phys_wb_setup(phys_enc); >>> + >>> +   _dpu_encoder_phys_wb_update_flush(phys_enc); >>> +} >>> + >>> +/** >>> + * dpu_encoder_phys_wb_needs_single_flush - trigger flush processing >>> + * @phys_enc:   Pointer to physical encoder >>> + */ >>> +static bool dpu_encoder_phys_wb_needs_single_flush(struct >>> dpu_encoder_phys *phys_enc) >>> +{ >>> +   DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); >>> +   return false; >>> +} >>> + >>> +/** >>> + * dpu_encoder_phys_wb_handle_post_kickoff - post-kickoff processing >>> + * @phys_enc:   Pointer to physical encoder >>> + */ >>> +static void dpu_encoder_phys_wb_handle_post_kickoff( >>> +       struct dpu_encoder_phys *phys_enc) >>> +{ >>> +   DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); >>> + >>> +} >>> + >>> +/** >>> + * dpu_encoder_phys_wb_enable - enable writeback encoder >>> + * @phys_enc:   Pointer to physical encoder >>> + */ >>> +static void dpu_encoder_phys_wb_enable(struct dpu_encoder_phys >>> *phys_enc) >>> +{ >>> +   DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); >>> +   phys_enc->enable_state = DPU_ENC_ENABLED; >>> +} >>> +/** >>> + * dpu_encoder_phys_wb_disable - disable writeback encoder >>> + * @phys_enc:   Pointer to physical encoder >>> + */ >>> +static void dpu_encoder_phys_wb_disable(struct dpu_encoder_phys >>> *phys_enc) >>> +{ >>> +   struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; >>> +   struct dpu_hw_ctl *hw_ctl = phys_enc->hw_ctl; >>> + >>> +   DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); >>> + >>> +   if (phys_enc->enable_state == DPU_ENC_DISABLED) { >>> +       DPU_ERROR("encoder is already disabled\n"); >>> +       return; >>> +   } >>> + >>> +   /* reset h/w before final flush */ >>> +   if (phys_enc->hw_ctl->ops.clear_pending_flush) >>> +       phys_enc->hw_ctl->ops.clear_pending_flush(phys_enc->hw_ctl); >>> + >>> +   /* >>> +    * New CTL reset sequence from 5.0 MDP onwards. >>> +    * If has_3d_merge_reset is not set, legacy reset >>> +    * sequence is executed. >>> +    * >>> +    * Legacy reset sequence has not been implemented yet. >>> +    * Any target earlier than SM8150 will need it and when >>> +    * WB support is added to those targets will need to add >>> +    * the legacy teardown sequence as well. >>> +    */ >>> +   if (hw_ctl->caps->features & BIT(DPU_CTL_ACTIVE_CFG)) >>> +       dpu_encoder_helper_phys_cleanup(phys_enc); >>> + >>> +   phys_enc->enable_state = DPU_ENC_DISABLED; >>> +} >>> + >>> +/** >>> + * dpu_encoder_phys_wb_destroy - destroy writeback encoder >>> + * @phys_enc:   Pointer to physical encoder >>> + */ >>> +static void dpu_encoder_phys_wb_destroy(struct dpu_encoder_phys >>> *phys_enc) >>> +{ >>> +   DPU_DEBUG("[wb:%d]\n", phys_enc->intf_idx - INTF_0); >>> + >>> +   if (!phys_enc) >>> +       return; >>> + >>> +   kfree(phys_enc); >>> +} >>> + >>> +static void dpu_encoder_phys_wb_prepare_wb_job(struct >>> dpu_encoder_phys *phys_enc, >>> +       struct drm_writeback_job *job) >>> +{ >>> +   const struct msm_format *format; >>> +   struct msm_gem_address_space *aspace; >>> +   struct dpu_hw_wb_cfg *wb_cfg; >>> +   int ret; >>> +   struct dpu_encoder_phys_wb *wb_enc = >>> to_dpu_encoder_phys_wb(phys_enc); >>> + >>> +   if (!job->fb) >>> +       return; >>> + >>> +   wb_enc->wb_job = job; >>> +   wb_enc->wb_conn = job->connector; >>> +   aspace = phys_enc->dpu_kms->base.aspace; >>> + >>> +   wb_cfg = &wb_enc->wb_cfg; >>> + >>> +   memset(wb_cfg, 0, sizeof(struct dpu_hw_wb_cfg)); >>> + >>> +   ret = msm_framebuffer_prepare(job->fb, aspace, false); >>> +   if (ret) { >>> +       DPU_ERROR("prep fb failed, %d\n", ret); >>> +       return; >>> +   } >>> + >>> +   format = msm_framebuffer_format(job->fb); >>> + >>> +   wb_cfg->dest.format = dpu_get_dpu_format_ext( >>> +           format->pixel_format, job->fb->modifier); >>> +   if (!wb_cfg->dest.format) { >>> +       /* this error should be detected during atomic_check */ >>> +       DPU_ERROR("failed to get format %x\n", format->pixel_format); >>> +       return; >>> +   } >>> + >>> +   ret = dpu_format_populate_layout(aspace, job->fb, &wb_cfg->dest); >>> +   if (ret) { >>> +       DPU_DEBUG("failed to populate layout %d\n", ret); >>> +       return; >>> +   } >>> + >>> +   wb_cfg->dest.width = job->fb->width; >>> +   wb_cfg->dest.height = job->fb->height; >>> +   wb_cfg->dest.num_planes = wb_cfg->dest.format->num_planes; >>> + >>> +   if ((wb_cfg->dest.format->fetch_planes == DPU_PLANE_PLANAR) && >>> +           (wb_cfg->dest.format->element[0] == C1_B_Cb)) >>> +       swap(wb_cfg->dest.plane_addr[1], wb_cfg->dest.plane_addr[2]); >>> + >>> +   DPU_DEBUG("[fb_offset:%8.8x,%8.8x,%8.8x,%8.8x]\n", >>> +           wb_cfg->dest.plane_addr[0], wb_cfg->dest.plane_addr[1], >>> +           wb_cfg->dest.plane_addr[2], wb_cfg->dest.plane_addr[3]); >>> + >>> +   DPU_DEBUG("[fb_stride:%8.8x,%8.8x,%8.8x,%8.8x]\n", >>> +           wb_cfg->dest.plane_pitch[0], wb_cfg->dest.plane_pitch[1], >>> +           wb_cfg->dest.plane_pitch[2], wb_cfg->dest.plane_pitch[3]); >>> +} >>> + >>> +static void dpu_encoder_phys_wb_cleanup_wb_job(struct >>> dpu_encoder_phys *phys_enc, >>> +       struct drm_writeback_job *job) >>> +{ >>> +   struct dpu_encoder_phys_wb *wb_enc = >>> to_dpu_encoder_phys_wb(phys_enc); >>> +   struct msm_gem_address_space *aspace; >>> + >>> +   if (!job->fb) >>> +       return; >>> + >>> +   aspace = phys_enc->dpu_kms->base.aspace; >>> + >>> +   msm_framebuffer_cleanup(job->fb, aspace, false); >>> +   wb_enc->wb_job = NULL; >>> +   wb_enc->wb_conn = NULL; >>> +} >>> + >>> +/** >>> + * dpu_encoder_phys_wb_init_ops - initialize writeback operations >>> + * @ops:   Pointer to encoder operation table >>> + */ >>> +static void dpu_encoder_phys_wb_init_ops(struct dpu_encoder_phys_ops >>> *ops) >>> +{ >>> +   ops->is_master = dpu_encoder_phys_wb_is_master; >>> +   ops->atomic_mode_set = dpu_encoder_phys_wb_atomic_mode_set; >>> +   ops->enable = dpu_encoder_phys_wb_enable; >>> +   ops->disable = dpu_encoder_phys_wb_disable; >>> +   ops->destroy = dpu_encoder_phys_wb_destroy; >>> +   ops->atomic_check = dpu_encoder_phys_wb_atomic_check; >>> +   ops->wait_for_commit_done = >>> dpu_encoder_phys_wb_wait_for_commit_done; >>> +   ops->prepare_for_kickoff = dpu_encoder_phys_wb_prepare_for_kickoff; >>> +   ops->handle_post_kickoff = dpu_encoder_phys_wb_handle_post_kickoff; >>> +   ops->needs_single_flush = dpu_encoder_phys_wb_needs_single_flush; >>> +   ops->trigger_start = dpu_encoder_helper_trigger_start; >>> +   ops->prepare_wb_job = dpu_encoder_phys_wb_prepare_wb_job; >>> +   ops->cleanup_wb_job = dpu_encoder_phys_wb_cleanup_wb_job; >>> +   ops->irq_control = dpu_encoder_phys_wb_irq_ctrl; >>> +} >>> + >>> +/** >>> + * dpu_encoder_phys_wb_init - initialize writeback encoder >>> + * @init:   Pointer to init info structure with initialization params >>> + */ >>> +struct dpu_encoder_phys *dpu_encoder_phys_wb_init( >>> +       struct dpu_enc_phys_init_params *p) >>> +{ >>> +   struct dpu_encoder_phys *phys_enc = NULL; >>> +   struct dpu_encoder_phys_wb *wb_enc = NULL; >>> +   int ret = 0; >>> +   int i; >>> + >>> +   DPU_DEBUG("\n"); >>> + >>> +   if (!p || !p->parent) { >>> +       DPU_ERROR("invalid params\n"); >>> +       ret = -EINVAL; >>> +       goto fail_alloc; >>> +   } >>> + >>> +   wb_enc = kzalloc(sizeof(*wb_enc), GFP_KERNEL); >>> +   if (!wb_enc) { >>> +       DPU_ERROR("failed to allocate wb phys_enc enc\n"); >>> +       ret = -ENOMEM; >>> +       goto fail_alloc; >>> +   } >>> + >>> +   phys_enc = &wb_enc->base; >>> +   phys_enc->hw_mdptop = p->dpu_kms->hw_mdp; >>> +   phys_enc->intf_idx = p->intf_idx; >>> + >>> +   dpu_encoder_phys_wb_init_ops(&phys_enc->ops); >>> +   phys_enc->parent = p->parent; >>> +   phys_enc->parent_ops = p->parent_ops; >>> +   phys_enc->dpu_kms = p->dpu_kms; >>> +   phys_enc->split_role = p->split_role; >>> +   phys_enc->intf_mode = INTF_MODE_WB_LINE; >>> +   phys_enc->intf_idx = p->intf_idx; >>> +   phys_enc->enc_spinlock = p->enc_spinlock; >>> + >>> +   atomic_set(&wb_enc->wbirq_refcount, 0); >>> + >>> +   for (i = 0; i < ARRAY_SIZE(phys_enc->irq); i++) >>> +       phys_enc->irq[i] = -EINVAL; >>> + >>> +   atomic_set(&phys_enc->pending_kickoff_cnt, 0); >>> +   atomic_set(&phys_enc->vblank_refcount, 0); >>> +   wb_enc->wb_done_timeout_cnt = 0; >>> + >>> +   init_waitqueue_head(&phys_enc->pending_kickoff_wq); >>> +   phys_enc->enable_state = DPU_ENC_DISABLED; >>> + >>> +   DPU_DEBUG("Created dpu_encoder_phys for wb %d\n", >>> +           phys_enc->intf_idx); >>> + >>> +   return phys_enc; >>> + >>> +fail_alloc: >>> +   return ERR_PTR(ret); >>> +} >> >>
On 4/20/2022 12:26 PM, Dmitry Baryshkov wrote: > On 20/04/2022 21:17, Abhinav Kumar wrote: >> >> >> On 4/20/2022 12:49 AM, Dmitry Baryshkov wrote: >>> On 20/04/2022 04:46, Abhinav Kumar wrote: >>>> Introduce the dpu_encoder_phys_* for the writeback interface >>>> to handle writeback specific hardware programming. >>>> >>>> changes in v2: >>>>     - rebase on msm-next and fix related dependencies namely >>>>      the irq cleanup >>>>     - move cdp_cfg, aspace out of dpu_encoder_phys_wb >>>>     - leave a comment about wb master >>>>     - start using _dpu_hw_get_qos_lut from dpu_hw_util >>>>     - replace hw_pp->merge_3d check with DPU_CTL_ACTIVE_CFG >>>> >>>> Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> >>>> --- >>>>  drivers/gpu/drm/msm/Makefile                      |  1 + >>>>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h  | 30 + >>>>  .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c   | 751 >>>> +++++++++++++++++++++ >>>>  3 files changed, 782 insertions(+) >>>>  create mode 100644 >>>> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c >>>> >>>> diff --git a/drivers/gpu/drm/msm/Makefile >>>> b/drivers/gpu/drm/msm/Makefile >>>> index ca779c1..0387f22 100644 >>>> --- a/drivers/gpu/drm/msm/Makefile >>>> +++ b/drivers/gpu/drm/msm/Makefile >>>> @@ -60,6 +60,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \ >>>>      disp/dpu1/dpu_encoder.o \ >>>>      disp/dpu1/dpu_encoder_phys_cmd.o \ >>>>      disp/dpu1/dpu_encoder_phys_vid.o \ >>>> +   disp/dpu1/dpu_encoder_phys_wb.o \ >>>>      disp/dpu1/dpu_formats.o \ >>>>      disp/dpu1/dpu_hw_catalog.o \ >>>>      disp/dpu1/dpu_hw_ctl.o \ >>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h >>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h >>>> index 00951f3..5452f98 100644 >>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h >>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h >>>> @@ -150,6 +150,7 @@ struct dpu_encoder_phys_ops { >>>>   * @INTR_IDX_PINGPONG: Pingpong done unterrupt for cmd mode panel >>>>   * @INTR_IDX_UNDERRUN: Underrun unterrupt for video and cmd mode >>>> panel >>>>   * @INTR_IDX_RDPTR:   Readpointer done unterrupt for cmd mode panel >>>> + * @INTR_IDX_WB_DONE: Writeback fone interrupt for virtual connector >>>>   */ >>>>  enum dpu_intr_idx { >>>>      INTR_IDX_VSYNC, >>>> @@ -157,6 +158,7 @@ enum dpu_intr_idx { >>>>      INTR_IDX_UNDERRUN, >>>>      INTR_IDX_CTL_START, >>>>      INTR_IDX_RDPTR, >>>> +   INTR_IDX_WB_DONE, >>>>      INTR_IDX_MAX, >>>>  }; >>>> @@ -224,6 +226,27 @@ static inline int >>>> dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys) >>>>  } >>>>  /** >>>> + * struct dpu_encoder_phys_wb - sub-class of dpu_encoder_phys to >>>> handle command >>>> + *   mode specific operations >>>> + * @base:   Baseclass physical encoder structure >>>> + * @wbirq_refcount:    Reference count of writeback interrupt >>>> + * @wb_done_timeout_cnt: number of wb done irq timeout errors >>>> + * @wb_cfg: writeback block config to store fb related details >>>> + * @wb_conn: backpointer to writeback connector >>>> + * @wb_job: backpointer to current writeback job >>>> + * @dest:  dpu buffer layout for current writeback output buffer >>>> + */ >>>> +struct dpu_encoder_phys_wb { >>>> +   struct dpu_encoder_phys base; >>>> +   atomic_t wbirq_refcount; >>>> +   int wb_done_timeout_cnt; >>>> +   struct dpu_hw_wb_cfg wb_cfg; >>>> +   struct drm_writeback_connector *wb_conn; >>>> +   struct drm_writeback_job *wb_job; >>>> +   struct dpu_hw_fmt_layout dest; >>>> +}; >>>> + >>>> +/** >>>>   * struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to >>>> handle command >>>>   *   mode specific operations >>>>   * @base:   Baseclass physical encoder structure >>>> @@ -291,6 +314,13 @@ struct dpu_encoder_phys >>>> *dpu_encoder_phys_cmd_init( >>>>          struct dpu_enc_phys_init_params *p); >>>>  /** >>>> + * dpu_encoder_phys_wb_init - initialize writeback encoder >>>> + * @init:   Pointer to init info structure with initialization params >>>> + */ >>>> +struct dpu_encoder_phys *dpu_encoder_phys_wb_init( >>>> +       struct dpu_enc_phys_init_params *p); >>>> + >>>> +/** >>>>   * dpu_encoder_helper_trigger_start - control start helper function >>>>   *   This helper function may be optionally specified by physical >>>>   *   encoders if they require ctl_start triggering. >>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c >>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c >>>> new file mode 100644 >>>> index 0000000..128317fe >>>> --- /dev/null >>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c >>>> @@ -0,0 +1,751 @@ >>>> +// SPDX-License-Identifier: GPL-2.0-only >>>> +/* >>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights >>>> reserved. >>>> + */ >>>> + >>>> +#define pr_fmt(fmt)   "[drm:%s:%d] " fmt, __func__, __LINE__ >>>> + >>>> +#include <linux/debugfs.h> >>>> + >>>> +#include "dpu_encoder_phys.h" >>>> +#include "dpu_formats.h" >>>> +#include "dpu_hw_top.h" >>>> +#include "dpu_hw_wb.h" >>>> +#include "dpu_hw_lm.h" >>>> +#include "dpu_hw_blk.h" >>>> +#include "dpu_hw_merge3d.h" >>>> +#include "dpu_hw_interrupts.h" >>>> +#include "dpu_core_irq.h" >>>> +#include "dpu_vbif.h" >>>> +#include "dpu_crtc.h" >>>> +#include "disp/msm_disp_snapshot.h" >>>> + >>>> +#define DEFAULT_MAX_WRITEBACK_WIDTH 2048 >>>> + >>>> +#define to_dpu_encoder_phys_wb(x) \ >>>> +   container_of(x, struct dpu_encoder_phys_wb, base) >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_is_master - report wb always as master encoder >>>> + */ >>>> +static bool dpu_encoder_phys_wb_is_master(struct dpu_encoder_phys >>>> *phys_enc) >>>> +{ >>>> +   /* there is only one physical enc for dpu_writeback */ >>>> +   return true; >>>> +} >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_set_ot_limit - set OT limit for writeback >>>> interface >>>> + * @phys_enc:   Pointer to physical encoder >>>> + */ >>>> +static void dpu_encoder_phys_wb_set_ot_limit( >>>> +       struct dpu_encoder_phys *phys_enc) >>>> +{ >>>> +   struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; >>>> +   struct dpu_vbif_set_ot_params ot_params; >>>> + >>>> +   memset(&ot_params, 0, sizeof(ot_params)); >>>> +   ot_params.xin_id = hw_wb->caps->xin_id; >>>> +   ot_params.num = hw_wb->idx - WB_0; >>>> +   ot_params.width = phys_enc->cached_mode.hdisplay; >>>> +   ot_params.height = phys_enc->cached_mode.vdisplay; >>>> +   ot_params.is_wfd = true; >>>> +   ot_params.frame_rate = drm_mode_vrefresh(&phys_enc->cached_mode); >>>> +   ot_params.vbif_idx = hw_wb->caps->vbif_idx; >>>> +   ot_params.clk_ctrl = hw_wb->caps->clk_ctrl; >>>> +   ot_params.rd = false; >>>> + >>>> +   dpu_vbif_set_ot_limit(phys_enc->dpu_kms, &ot_params); >>>> +} >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_set_qos_remap - set QoS remapper for writeback >>>> + * @phys_enc:   Pointer to physical encoder >>>> + */ >>>> +static void dpu_encoder_phys_wb_set_qos_remap( >>>> +       struct dpu_encoder_phys *phys_enc) >>>> +{ >>>> +   struct dpu_hw_wb *hw_wb; >>>> +   struct dpu_vbif_set_qos_params qos_params; >>>> + >>>> +   if (!phys_enc || !phys_enc->parent || !phys_enc->parent->crtc) { >>>> +       DPU_ERROR("invalid arguments\n"); >>>> +       return; >>>> +   } >>>> + >>>> +   if (!phys_enc->hw_wb || !phys_enc->hw_wb->caps) { >>>> +       DPU_ERROR("invalid writeback hardware\n"); >>>> +       return; >>>> +   } >>>> + >>>> +   hw_wb = phys_enc->hw_wb; >>>> + >>>> +   memset(&qos_params, 0, sizeof(qos_params)); >>>> +   qos_params.vbif_idx = hw_wb->caps->vbif_idx; >>>> +   qos_params.xin_id = hw_wb->caps->xin_id; >>>> +   qos_params.clk_ctrl = hw_wb->caps->clk_ctrl; >>>> +   qos_params.num = hw_wb->idx - WB_0; >>>> +   qos_params.is_rt = false; >>>> + >>>> +   DPU_DEBUG("[qos_remap] wb:%d vbif:%d xin:%d is_rt:%d\n", >>>> +           qos_params.num, >>>> +           qos_params.vbif_idx, >>>> +           qos_params.xin_id, qos_params.is_rt); >>>> + >>>> +   dpu_vbif_set_qos_remap(phys_enc->dpu_kms, &qos_params); >>>> +} >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_set_qos - set QoS/danger/safe LUTs for >>>> writeback >>>> + * @phys_enc:   Pointer to physical encoder >>>> + */ >>>> +static void dpu_encoder_phys_wb_set_qos(struct dpu_encoder_phys >>>> *phys_enc) >>>> +{ >>>> +   struct dpu_hw_wb *hw_wb; >>>> +   struct dpu_hw_wb_qos_cfg qos_cfg; >>>> +   struct dpu_mdss_cfg *catalog; >>>> +   struct dpu_qos_lut_tbl *qos_lut_tb; >>>> + >>>> +   if (!phys_enc || !phys_enc->dpu_kms || >>>> !phys_enc->dpu_kms->catalog) { >>>> +       DPU_ERROR("invalid parameter(s)\n"); >>>> +       return; >>>> +   } >>>> + >>>> +   catalog = phys_enc->dpu_kms->catalog; >>>> + >>>> +   hw_wb = phys_enc->hw_wb; >>>> + >>>> +   memset(&qos_cfg, 0, sizeof(struct dpu_hw_wb_qos_cfg)); >>>> +   qos_cfg.danger_safe_en = true; >>>> +   qos_cfg.danger_lut = >>>> +       catalog->perf.danger_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; >>>> + >>>> +   qos_cfg.safe_lut = >>>> catalog->perf.safe_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; >>>> + >>>> +   qos_lut_tb = &catalog->perf.qos_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; >>>> +   qos_cfg.creq_lut = _dpu_hw_get_qos_lut(qos_lut_tb, 0); >>>> + >>>> +   if (hw_wb->ops.setup_qos_lut) >>>> +       hw_wb->ops.setup_qos_lut(hw_wb, &qos_cfg); >>>> +} >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_setup_fb - setup output framebuffer >>>> + * @phys_enc:   Pointer to physical encoder >>>> + * @fb:       Pointer to output framebuffer >>>> + * @wb_roi:   Pointer to output region of interest >>>> + */ >>>> +static void dpu_encoder_phys_wb_setup_fb(struct dpu_encoder_phys >>>> *phys_enc, >>>> +       struct drm_framebuffer *fb) >>>> +{ >>>> +   struct dpu_encoder_phys_wb *wb_enc = >>>> to_dpu_encoder_phys_wb(phys_enc); >>>> +   struct dpu_hw_wb *hw_wb; >>>> +   struct dpu_hw_wb_cfg *wb_cfg; >>>> +   struct dpu_hw_wb_cdp_cfg cdp_cfg; >>>> + >>>> +   if (!phys_enc || !phys_enc->dpu_kms || >>>> !phys_enc->dpu_kms->catalog) { >>>> +       DPU_ERROR("invalid encoder\n"); >>>> +       return; >>>> +   } >>>> + >>>> +   hw_wb = phys_enc->hw_wb; >>>> +   wb_cfg = &wb_enc->wb_cfg; >>>> + >>>> +   wb_cfg->intf_mode = phys_enc->intf_mode; >>>> +   wb_cfg->roi.x1 = 0; >>>> +   wb_cfg->roi.x2 = phys_enc->cached_mode.hdisplay; >>>> +   wb_cfg->roi.y1 = 0; >>>> +   wb_cfg->roi.y2 = phys_enc->cached_mode.vdisplay; >>>> + >>>> +   if (hw_wb->ops.setup_roi) >>>> +       hw_wb->ops.setup_roi(hw_wb, wb_cfg); >>>> + >>>> +   if (hw_wb->ops.setup_outformat) >>>> +       hw_wb->ops.setup_outformat(hw_wb, wb_cfg); >>>> + >>>> +   if (hw_wb->ops.setup_cdp) { >>>> +       memset(&cdp_cfg, 0, sizeof(struct dpu_hw_wb_cdp_cfg)); >>>> + >>>> +       cdp_cfg.enable = phys_enc->dpu_kms->catalog->perf.cdp_cfg >>>> +               [DPU_PERF_CDP_USAGE_NRT].wr_enable; >>>> +       cdp_cfg.ubwc_meta_enable = >>>> +               DPU_FORMAT_IS_UBWC(wb_cfg->dest.format); >>>> +       cdp_cfg.tile_amortize_enable = >>>> +               DPU_FORMAT_IS_UBWC(wb_cfg->dest.format) || >>>> +               DPU_FORMAT_IS_TILE(wb_cfg->dest.format); >>>> +       cdp_cfg.preload_ahead = DPU_WB_CDP_PRELOAD_AHEAD_64; >>>> + >>>> +       hw_wb->ops.setup_cdp(hw_wb, &cdp_cfg); >>>> +   } >>>> + >>>> +   if (hw_wb->ops.setup_outaddress) >>>> +       hw_wb->ops.setup_outaddress(hw_wb, wb_cfg); >>>> +} >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_setup_cdp - setup chroma down prefetch block >>>> + * @phys_enc:Pointer to physical encoder >>>> + */ >>>> +static void dpu_encoder_phys_wb_setup_cdp(struct dpu_encoder_phys >>>> *phys_enc) >>>> +{ >>>> +   struct dpu_hw_wb *hw_wb; >>>> +   struct dpu_hw_ctl *ctl; >>>> + >>>> +   if (!phys_enc) { >>>> +       DPU_ERROR("invalid encoder\n"); >>>> +       return; >>>> +   } >>>> + >>>> +   hw_wb = phys_enc->hw_wb; >>>> +   ctl = phys_enc->hw_ctl; >>>> + >>>> +   if (test_bit(DPU_CTL_ACTIVE_CFG, &ctl->caps->features) && >>>> +       (phys_enc->hw_ctl && >>>> +        phys_enc->hw_ctl->ops.setup_intf_cfg)) { >>>> +       struct dpu_hw_intf_cfg intf_cfg = {0}; >>>> +       struct dpu_hw_pingpong *hw_pp = phys_enc->hw_pp; >>>> +       enum dpu_3d_blend_mode mode_3d; >>>> + >>>> +       mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc); >>>> + >>>> +       intf_cfg.intf = DPU_NONE; >>>> +       intf_cfg.wb = hw_wb->idx; >>>> + >>>> +       if (mode_3d && hw_pp && hw_pp->merge_3d) >>>> +           intf_cfg.merge_3d = hw_pp->merge_3d->idx; >>>> + >>>> +       if (phys_enc->hw_pp->merge_3d && >>>> phys_enc->hw_pp->merge_3d->ops.setup_3d_mode) >>>> + >>>> phys_enc->hw_pp->merge_3d->ops.setup_3d_mode(phys_enc->hw_pp->merge_3d, >>>> +                   mode_3d); >>>> + >>>> +       /* setup which pp blk will connect to this wb */ >>>> +       if (hw_pp && phys_enc->hw_wb->ops.bind_pingpong_blk) >>>> +           phys_enc->hw_wb->ops.bind_pingpong_blk(phys_enc->hw_wb, >>>> true, >>>> +                   phys_enc->hw_pp->idx); >>>> + >>>> +       phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl, >>>> &intf_cfg); >>>> +   } else if (phys_enc->hw_ctl && >>>> phys_enc->hw_ctl->ops.setup_intf_cfg) { >>>> +       struct dpu_hw_intf_cfg intf_cfg = {0}; >>>> + >>>> +       intf_cfg.intf = DPU_NONE; >>>> +       intf_cfg.wb = hw_wb->idx; >>>> +       intf_cfg.mode_3d = >>>> +           dpu_encoder_helper_get_3d_blend_mode(phys_enc); >>>> +       phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl, >>>> &intf_cfg); >>>> +   } >>>> +} >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_atomic_check - verify and fixup given atomic >>>> states >>>> + * @phys_enc:   Pointer to physical encoder >>>> + * @crtc_state:   Pointer to CRTC atomic state >>>> + * @conn_state:   Pointer to connector atomic state >>>> + */ >>>> +static int dpu_encoder_phys_wb_atomic_check( >>>> +       struct dpu_encoder_phys *phys_enc, >>>> +       struct drm_crtc_state *crtc_state, >>>> +       struct drm_connector_state *conn_state) >>>> +{ >>>> +   struct drm_framebuffer *fb; >>>> +   const struct drm_display_mode *mode; >>>> + >>>> +   DPU_DEBUG("[atomic_check:%d, \"%s\",%d,%d]\n", >>>> +           phys_enc->intf_idx, mode->name, mode->hdisplay, >>>> mode->vdisplay); >>>> + >>>> +   if (!conn_state->writeback_job || !conn_state->writeback_job->fb) >>>> +       return 0; >>>> + >>>> +   fb = conn_state->writeback_job->fb; >>>> +   mode = &crtc_state->mode; >>>> + >>>> +   if (!conn_state || !conn_state->connector) { >>>> +       DPU_ERROR("invalid connector state\n"); >>>> +       return -EINVAL; >>>> +   } else if (conn_state->connector->status != >>>> +           connector_status_connected) { >>>> +       DPU_ERROR("connector not connected %d\n", >>>> +               conn_state->connector->status); >>>> +       return -EINVAL; >>>> +   } >>>> + >>>> +   DPU_DEBUG("[fb_id:%u][fb:%u,%u]\n", fb->base.id, >>>> +           fb->width, fb->height); >>>> + >>>> +   if (fb->width != mode->hdisplay) { >>>> +       DPU_ERROR("invalid fb w=%d, mode w=%d\n", fb->width, >>>> +               mode->hdisplay); >>>> +       return -EINVAL; >>>> +   } else if (fb->height != mode->vdisplay) { >>>> +       DPU_ERROR("invalid fb h=%d, mode h=%d\n", fb->height, >>>> +                 mode->vdisplay); >>>> +       return -EINVAL; >>>> +   } else if (fb->width > DEFAULT_MAX_WRITEBACK_WIDTH) { >>>> +       DPU_ERROR("invalid fb w=%d, maxlinewidth=%u\n", >>>> +                 fb->width, DEFAULT_MAX_WRITEBACK_WIDTH); >>>> +       return -EINVAL; >>>> +   } >>> >>> Being not an expert in the DRM WB API, I have a question: are those >>> hardware limitations or the DRM requirement that we can not write to >>> the region inside the attached FB? >> >> Both. The first two checks are indeed DRM requirement and infact igt >> writeback tests this to ensure that the driver rejects any invalid FBs >> which are not equal to the mode that was set. >> >> https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/blob/master/tests/kms_writeback.c#L409 > > > The test is writing to the fb which is smaller than the used video mode > (which is an obvious mistake). Is it correst to write back to the FB > that is bigger than the selected resolution? Ah, so your question is whether writeback can just write to a portion of the larger FB. Yes, its possible . So thats another follow-up feature to support WB_ROI. WB can be made to program a smaller ROI in the larger buffer. It is possible. Just not supported in this version and even downstream even though the code is present, its not verified extensively. When we add support for it, we will relax these conditions based on the feature. > >> The last check is coming from our hardware > >>> >>>> + >>>> +   return 0; >>>> +} >>>> + >>>> + >>>> +/** >>>> + * _dpu_encoder_phys_wb_update_flush - flush hardware update >>>> + * @phys_enc:   Pointer to physical encoder >>>> + */ >>>> +static void _dpu_encoder_phys_wb_update_flush(struct >>>> dpu_encoder_phys *phys_enc) >>>> +{ >>>> +   struct dpu_hw_wb *hw_wb; >>>> +   struct dpu_hw_ctl *hw_ctl; >>>> +   struct dpu_hw_pingpong *hw_pp; >>>> +   u32 pending_flush = 0; >>>> + >>>> +   if (!phys_enc) >>>> +       return; >>>> + >>>> +   hw_wb = phys_enc->hw_wb; >>>> +   hw_pp = phys_enc->hw_pp; >>>> +   hw_ctl = phys_enc->hw_ctl; >>>> + >>>> +   DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); >>>> + >>>> +   if (!hw_ctl) { >>>> +       DPU_DEBUG("[wb:%d] no ctl assigned\n", hw_wb->idx - WB_0); >>>> +       return; >>>> +   } >>>> + >>>> +   if (hw_ctl->ops.update_pending_flush_wb) >>>> +       hw_ctl->ops.update_pending_flush_wb(hw_ctl, hw_wb->idx); >>>> + >>>> +   if (hw_ctl->ops.update_pending_flush_merge_3d && hw_pp && >>>> hw_pp->merge_3d) >>>> +       hw_ctl->ops.update_pending_flush_merge_3d(hw_ctl, >>>> +               hw_pp->merge_3d->idx); >>>> + >>>> +   if (hw_ctl->ops.get_pending_flush) >>>> +       pending_flush = hw_ctl->ops.get_pending_flush(hw_ctl); >>>> + >>>> +   DPU_DEBUG("Pending flush mask for CTL_%d is 0x%x, WB %d\n", >>>> +           hw_ctl->idx - CTL_0, pending_flush, >>>> +           hw_wb->idx - WB_0); >>>> +} >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_setup - setup writeback encoder >>>> + * @phys_enc:   Pointer to physical encoder >>>> + */ >>>> +static void dpu_encoder_phys_wb_setup( >>>> +       struct dpu_encoder_phys *phys_enc) >>>> +{ >>>> +   struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; >>>> +   struct drm_display_mode mode = phys_enc->cached_mode; >>>> +   struct drm_framebuffer *fb = NULL; >>>> + >>>> +   DPU_DEBUG("[mode_set:%d, \"%s\",%d,%d]\n", >>>> +           hw_wb->idx - WB_0, mode.name, >>>> +           mode.hdisplay, mode.vdisplay); >>>> + >>>> +   dpu_encoder_phys_wb_set_ot_limit(phys_enc); >>>> + >>>> +   dpu_encoder_phys_wb_set_qos_remap(phys_enc); >>>> + >>>> +   dpu_encoder_phys_wb_set_qos(phys_enc); >>>> + >>>> +   dpu_encoder_phys_wb_setup_fb(phys_enc, fb); >>>> + >>>> +   dpu_encoder_phys_wb_setup_cdp(phys_enc); >>>> + >>>> +} >>>> + >>>> +static void _dpu_encoder_phys_wb_frame_done_helper(void *arg) >>>> +{ >>>> +   struct dpu_encoder_phys *phys_enc = arg; >>>> +   struct dpu_encoder_phys_wb *wb_enc = >>>> to_dpu_encoder_phys_wb(phys_enc); >>>> + >>>> +   struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; >>>> +   unsigned long lock_flags; >>>> +   u32 event = DPU_ENCODER_FRAME_EVENT_DONE; >>>> + >>>> +   DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); >>>> + >>>> +   if (phys_enc->parent_ops->handle_frame_done) >>>> +       phys_enc->parent_ops->handle_frame_done(phys_enc->parent, >>>> +               phys_enc, event); >>>> + >>>> +   if (phys_enc->parent_ops->handle_vblank_virt) >>>> +       phys_enc->parent_ops->handle_vblank_virt(phys_enc->parent, >>>> +               phys_enc); >>>> + >>>> +   spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags); >>>> +   atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0); >>>> +   spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags); >>>> + >>>> +   if (wb_enc->wb_conn) >>>> +       drm_writeback_signal_completion(wb_enc->wb_conn, 0); >>>> + >>>> +   /* Signal any waiting atomic commit thread */ >>>> +   wake_up_all(&phys_enc->pending_kickoff_wq); >>>> +} >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_done_irq - writeback interrupt handler >>>> + * @arg:   Pointer to writeback encoder >>>> + * @irq_idx:   interrupt index >>>> + */ >>>> +static void dpu_encoder_phys_wb_done_irq(void *arg, int irq_idx) >>>> +{ >>>> +   _dpu_encoder_phys_wb_frame_done_helper(arg); >>>> +} >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_irq_ctrl - irq control of WB >>>> + * @phys:   Pointer to physical encoder >>>> + * @enable:   indicates enable or disable interrupts >>>> + */ >>>> +static void dpu_encoder_phys_wb_irq_ctrl( >>>> +       struct dpu_encoder_phys *phys, bool enable) >>>> +{ >>>> + >>>> +   struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys); >>>> +   int ret = 0; >>>> +   int refcount; >>>> + >>>> +   refcount = atomic_read(&wb_enc->wbirq_refcount); >>>> + >>>> +   if (enable && atomic_inc_return(&wb_enc->wbirq_refcount) == 1) { >>>> +       dpu_core_irq_register_callback(phys->dpu_kms, >>>> +               phys->irq[INTR_IDX_WB_DONE], >>>> dpu_encoder_phys_wb_done_irq, phys); >>>> +       if (ret) >>>> +           atomic_dec_return(&wb_enc->wbirq_refcount); >>>> +   } else if (!enable && >>>> +           atomic_dec_return(&wb_enc->wbirq_refcount) == 0) { >>>> +       dpu_core_irq_unregister_callback(phys->dpu_kms, >>>> phys->irq[INTR_IDX_WB_DONE]); >>>> +       if (ret) >>>> +           atomic_inc_return(&wb_enc->wbirq_refcount); >>>> +   } >>>> +} >>>> + >>>> +static void dpu_encoder_phys_wb_atomic_mode_set( >>>> +       struct dpu_encoder_phys *phys_enc, >>>> +       struct drm_crtc_state *crtc_state, >>>> +       struct drm_connector_state *conn_state) >>>> +{ >>>> + >>>> +   phys_enc->irq[INTR_IDX_WB_DONE] = >>>> phys_enc->hw_wb->caps->intr_wb_done; >>>> +} >>>> + >>>> +static void _dpu_encoder_phys_wb_handle_wbdone_timeout( >>>> +       struct dpu_encoder_phys *phys_enc) >>>> +{ >>>> +   struct dpu_encoder_phys_wb *wb_enc = >>>> to_dpu_encoder_phys_wb(phys_enc); >>>> +   u32 frame_event = DPU_ENCODER_FRAME_EVENT_ERROR; >>>> + >>>> +   wb_enc->wb_done_timeout_cnt++; >>>> + >>>> +   if (wb_enc->wb_done_timeout_cnt == 1) >>>> +       msm_disp_snapshot_state(phys_enc->parent->dev); >>>> + >>>> +   atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0); >>>> + >>>> +   /* request a ctl reset before the next kickoff */ >>>> +   phys_enc->enable_state = DPU_ENC_ERR_NEEDS_HW_RESET; >>>> + >>>> +   if (wb_enc->wb_conn) >>>> +       drm_writeback_signal_completion(wb_enc->wb_conn, 0); >>>> + >>>> +   if (phys_enc->parent_ops->handle_frame_done) >>>> +       phys_enc->parent_ops->handle_frame_done( >>>> +               phys_enc->parent, phys_enc, frame_event); >>>> +} >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_wait_for_commit_done - wait until request is >>>> committed >>>> + * @phys_enc:   Pointer to physical encoder >>>> + */ >>>> +static int dpu_encoder_phys_wb_wait_for_commit_done( >>>> +       struct dpu_encoder_phys *phys_enc) >>>> +{ >>>> +   unsigned long ret; >>>> +   struct dpu_encoder_wait_info wait_info; >>>> +   struct dpu_encoder_phys_wb *wb_enc = >>>> to_dpu_encoder_phys_wb(phys_enc); >>>> + >>>> +   wait_info.wq = &phys_enc->pending_kickoff_wq; >>>> +   wait_info.atomic_cnt = &phys_enc->pending_kickoff_cnt; >>>> +   wait_info.timeout_ms = KICKOFF_TIMEOUT_MS; >>>> + >>>> +   ret = dpu_encoder_helper_wait_for_irq(phys_enc, INTR_IDX_WB_DONE, >>>> +           dpu_encoder_phys_wb_done_irq, &wait_info); >>>> +   if (ret == -ETIMEDOUT) >>>> +       _dpu_encoder_phys_wb_handle_wbdone_timeout(phys_enc); >>>> +   else if (!ret) >>>> +       wb_enc->wb_done_timeout_cnt = 0; >>>> + >>>> +   return ret; >>>> +} >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_prepare_for_kickoff - pre-kickoff processing >>>> + * @phys_enc:   Pointer to physical encoder >>>> + * Returns:   Zero on success >>>> + */ >>>> +static void dpu_encoder_phys_wb_prepare_for_kickoff( >>>> +       struct dpu_encoder_phys *phys_enc) >>>> +{ >>>> +   struct dpu_encoder_phys_wb *wb_enc = >>>> to_dpu_encoder_phys_wb(phys_enc); >>>> +   struct drm_connector *drm_conn; >>>> +   struct drm_connector_state *state; >>>> + >>>> +   DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); >>>> + >>>> +   if (!wb_enc->wb_conn || !wb_enc->wb_job) { >>>> +       DPU_ERROR("invalid wb_conn or wb_job\n"); >>>> +       return; >>>> +   } >>>> + >>>> +   drm_conn = &wb_enc->wb_conn->base; >>>> +   state = drm_conn->state; >>>> + >>>> +   if (wb_enc->wb_conn && wb_enc->wb_job) >>>> +       drm_writeback_queue_job(wb_enc->wb_conn, state); >>>> + >>>> +   dpu_encoder_phys_wb_setup(phys_enc); >>>> + >>>> +   _dpu_encoder_phys_wb_update_flush(phys_enc); >>>> +} >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_needs_single_flush - trigger flush processing >>>> + * @phys_enc:   Pointer to physical encoder >>>> + */ >>>> +static bool dpu_encoder_phys_wb_needs_single_flush(struct >>>> dpu_encoder_phys *phys_enc) >>>> +{ >>>> +   DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); >>>> +   return false; >>>> +} >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_handle_post_kickoff - post-kickoff processing >>>> + * @phys_enc:   Pointer to physical encoder >>>> + */ >>>> +static void dpu_encoder_phys_wb_handle_post_kickoff( >>>> +       struct dpu_encoder_phys *phys_enc) >>>> +{ >>>> +   DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); >>>> + >>>> +} >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_enable - enable writeback encoder >>>> + * @phys_enc:   Pointer to physical encoder >>>> + */ >>>> +static void dpu_encoder_phys_wb_enable(struct dpu_encoder_phys >>>> *phys_enc) >>>> +{ >>>> +   DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); >>>> +   phys_enc->enable_state = DPU_ENC_ENABLED; >>>> +} >>>> +/** >>>> + * dpu_encoder_phys_wb_disable - disable writeback encoder >>>> + * @phys_enc:   Pointer to physical encoder >>>> + */ >>>> +static void dpu_encoder_phys_wb_disable(struct dpu_encoder_phys >>>> *phys_enc) >>>> +{ >>>> +   struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; >>>> +   struct dpu_hw_ctl *hw_ctl = phys_enc->hw_ctl; >>>> + >>>> +   DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); >>>> + >>>> +   if (phys_enc->enable_state == DPU_ENC_DISABLED) { >>>> +       DPU_ERROR("encoder is already disabled\n"); >>>> +       return; >>>> +   } >>>> + >>>> +   /* reset h/w before final flush */ >>>> +   if (phys_enc->hw_ctl->ops.clear_pending_flush) >>>> +       phys_enc->hw_ctl->ops.clear_pending_flush(phys_enc->hw_ctl); >>>> + >>>> +   /* >>>> +    * New CTL reset sequence from 5.0 MDP onwards. >>>> +    * If has_3d_merge_reset is not set, legacy reset >>>> +    * sequence is executed. >>>> +    * >>>> +    * Legacy reset sequence has not been implemented yet. >>>> +    * Any target earlier than SM8150 will need it and when >>>> +    * WB support is added to those targets will need to add >>>> +    * the legacy teardown sequence as well. >>>> +    */ >>>> +   if (hw_ctl->caps->features & BIT(DPU_CTL_ACTIVE_CFG)) >>>> +       dpu_encoder_helper_phys_cleanup(phys_enc); >>>> + >>>> +   phys_enc->enable_state = DPU_ENC_DISABLED; >>>> +} >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_destroy - destroy writeback encoder >>>> + * @phys_enc:   Pointer to physical encoder >>>> + */ >>>> +static void dpu_encoder_phys_wb_destroy(struct dpu_encoder_phys >>>> *phys_enc) >>>> +{ >>>> +   DPU_DEBUG("[wb:%d]\n", phys_enc->intf_idx - INTF_0); >>>> + >>>> +   if (!phys_enc) >>>> +       return; >>>> + >>>> +   kfree(phys_enc); >>>> +} >>>> + >>>> +static void dpu_encoder_phys_wb_prepare_wb_job(struct >>>> dpu_encoder_phys *phys_enc, >>>> +       struct drm_writeback_job *job) >>>> +{ >>>> +   const struct msm_format *format; >>>> +   struct msm_gem_address_space *aspace; >>>> +   struct dpu_hw_wb_cfg *wb_cfg; >>>> +   int ret; >>>> +   struct dpu_encoder_phys_wb *wb_enc = >>>> to_dpu_encoder_phys_wb(phys_enc); >>>> + >>>> +   if (!job->fb) >>>> +       return; >>>> + >>>> +   wb_enc->wb_job = job; >>>> +   wb_enc->wb_conn = job->connector; >>>> +   aspace = phys_enc->dpu_kms->base.aspace; >>>> + >>>> +   wb_cfg = &wb_enc->wb_cfg; >>>> + >>>> +   memset(wb_cfg, 0, sizeof(struct dpu_hw_wb_cfg)); >>>> + >>>> +   ret = msm_framebuffer_prepare(job->fb, aspace, false); >>>> +   if (ret) { >>>> +       DPU_ERROR("prep fb failed, %d\n", ret); >>>> +       return; >>>> +   } >>>> + >>>> +   format = msm_framebuffer_format(job->fb); >>>> + >>>> +   wb_cfg->dest.format = dpu_get_dpu_format_ext( >>>> +           format->pixel_format, job->fb->modifier); >>>> +   if (!wb_cfg->dest.format) { >>>> +       /* this error should be detected during atomic_check */ >>>> +       DPU_ERROR("failed to get format %x\n", format->pixel_format); >>>> +       return; >>>> +   } >>>> + >>>> +   ret = dpu_format_populate_layout(aspace, job->fb, &wb_cfg->dest); >>>> +   if (ret) { >>>> +       DPU_DEBUG("failed to populate layout %d\n", ret); >>>> +       return; >>>> +   } >>>> + >>>> +   wb_cfg->dest.width = job->fb->width; >>>> +   wb_cfg->dest.height = job->fb->height; >>>> +   wb_cfg->dest.num_planes = wb_cfg->dest.format->num_planes; >>>> + >>>> +   if ((wb_cfg->dest.format->fetch_planes == DPU_PLANE_PLANAR) && >>>> +           (wb_cfg->dest.format->element[0] == C1_B_Cb)) >>>> +       swap(wb_cfg->dest.plane_addr[1], wb_cfg->dest.plane_addr[2]); >>>> + >>>> +   DPU_DEBUG("[fb_offset:%8.8x,%8.8x,%8.8x,%8.8x]\n", >>>> +           wb_cfg->dest.plane_addr[0], wb_cfg->dest.plane_addr[1], >>>> +           wb_cfg->dest.plane_addr[2], wb_cfg->dest.plane_addr[3]); >>>> + >>>> +   DPU_DEBUG("[fb_stride:%8.8x,%8.8x,%8.8x,%8.8x]\n", >>>> +           wb_cfg->dest.plane_pitch[0], wb_cfg->dest.plane_pitch[1], >>>> +           wb_cfg->dest.plane_pitch[2], wb_cfg->dest.plane_pitch[3]); >>>> +} >>>> + >>>> +static void dpu_encoder_phys_wb_cleanup_wb_job(struct >>>> dpu_encoder_phys *phys_enc, >>>> +       struct drm_writeback_job *job) >>>> +{ >>>> +   struct dpu_encoder_phys_wb *wb_enc = >>>> to_dpu_encoder_phys_wb(phys_enc); >>>> +   struct msm_gem_address_space *aspace; >>>> + >>>> +   if (!job->fb) >>>> +       return; >>>> + >>>> +   aspace = phys_enc->dpu_kms->base.aspace; >>>> + >>>> +   msm_framebuffer_cleanup(job->fb, aspace, false); >>>> +   wb_enc->wb_job = NULL; >>>> +   wb_enc->wb_conn = NULL; >>>> +} >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_init_ops - initialize writeback operations >>>> + * @ops:   Pointer to encoder operation table >>>> + */ >>>> +static void dpu_encoder_phys_wb_init_ops(struct >>>> dpu_encoder_phys_ops *ops) >>>> +{ >>>> +   ops->is_master = dpu_encoder_phys_wb_is_master; >>>> +   ops->atomic_mode_set = dpu_encoder_phys_wb_atomic_mode_set; >>>> +   ops->enable = dpu_encoder_phys_wb_enable; >>>> +   ops->disable = dpu_encoder_phys_wb_disable; >>>> +   ops->destroy = dpu_encoder_phys_wb_destroy; >>>> +   ops->atomic_check = dpu_encoder_phys_wb_atomic_check; >>>> +   ops->wait_for_commit_done = >>>> dpu_encoder_phys_wb_wait_for_commit_done; >>>> +   ops->prepare_for_kickoff = >>>> dpu_encoder_phys_wb_prepare_for_kickoff; >>>> +   ops->handle_post_kickoff = >>>> dpu_encoder_phys_wb_handle_post_kickoff; >>>> +   ops->needs_single_flush = dpu_encoder_phys_wb_needs_single_flush; >>>> +   ops->trigger_start = dpu_encoder_helper_trigger_start; >>>> +   ops->prepare_wb_job = dpu_encoder_phys_wb_prepare_wb_job; >>>> +   ops->cleanup_wb_job = dpu_encoder_phys_wb_cleanup_wb_job; >>>> +   ops->irq_control = dpu_encoder_phys_wb_irq_ctrl; >>>> +} >>>> + >>>> +/** >>>> + * dpu_encoder_phys_wb_init - initialize writeback encoder >>>> + * @init:   Pointer to init info structure with initialization params >>>> + */ >>>> +struct dpu_encoder_phys *dpu_encoder_phys_wb_init( >>>> +       struct dpu_enc_phys_init_params *p) >>>> +{ >>>> +   struct dpu_encoder_phys *phys_enc = NULL; >>>> +   struct dpu_encoder_phys_wb *wb_enc = NULL; >>>> +   int ret = 0; >>>> +   int i; >>>> + >>>> +   DPU_DEBUG("\n"); >>>> + >>>> +   if (!p || !p->parent) { >>>> +       DPU_ERROR("invalid params\n"); >>>> +       ret = -EINVAL; >>>> +       goto fail_alloc; >>>> +   } >>>> + >>>> +   wb_enc = kzalloc(sizeof(*wb_enc), GFP_KERNEL); >>>> +   if (!wb_enc) { >>>> +       DPU_ERROR("failed to allocate wb phys_enc enc\n"); >>>> +       ret = -ENOMEM; >>>> +       goto fail_alloc; >>>> +   } >>>> + >>>> +   phys_enc = &wb_enc->base; >>>> +   phys_enc->hw_mdptop = p->dpu_kms->hw_mdp; >>>> +   phys_enc->intf_idx = p->intf_idx; >>>> + >>>> +   dpu_encoder_phys_wb_init_ops(&phys_enc->ops); >>>> +   phys_enc->parent = p->parent; >>>> +   phys_enc->parent_ops = p->parent_ops; >>>> +   phys_enc->dpu_kms = p->dpu_kms; >>>> +   phys_enc->split_role = p->split_role; >>>> +   phys_enc->intf_mode = INTF_MODE_WB_LINE; >>>> +   phys_enc->intf_idx = p->intf_idx; >>>> +   phys_enc->enc_spinlock = p->enc_spinlock; >>>> + >>>> +   atomic_set(&wb_enc->wbirq_refcount, 0); >>>> + >>>> +   for (i = 0; i < ARRAY_SIZE(phys_enc->irq); i++) >>>> +       phys_enc->irq[i] = -EINVAL; >>>> + >>>> +   atomic_set(&phys_enc->pending_kickoff_cnt, 0); >>>> +   atomic_set(&phys_enc->vblank_refcount, 0); >>>> +   wb_enc->wb_done_timeout_cnt = 0; >>>> + >>>> +   init_waitqueue_head(&phys_enc->pending_kickoff_wq); >>>> +   phys_enc->enable_state = DPU_ENC_DISABLED; >>>> + >>>> +   DPU_DEBUG("Created dpu_encoder_phys for wb %d\n", >>>> +           phys_enc->intf_idx); >>>> + >>>> +   return phys_enc; >>>> + >>>> +fail_alloc: >>>> +   return ERR_PTR(ret); >>>> +} >>> >>> > >
On Wed, 20 Apr 2022 at 22:36, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote: > > > > On 4/20/2022 12:26 PM, Dmitry Baryshkov wrote: > > On 20/04/2022 21:17, Abhinav Kumar wrote: > >> > >> > >> On 4/20/2022 12:49 AM, Dmitry Baryshkov wrote: > >>> On 20/04/2022 04:46, Abhinav Kumar wrote: > >>>> Introduce the dpu_encoder_phys_* for the writeback interface > >>>> to handle writeback specific hardware programming. > >>>> > >>>> changes in v2: > >>>> - rebase on msm-next and fix related dependencies namely > >>>> the irq cleanup > >>>> - move cdp_cfg, aspace out of dpu_encoder_phys_wb > >>>> - leave a comment about wb master > >>>> - start using _dpu_hw_get_qos_lut from dpu_hw_util > >>>> - replace hw_pp->merge_3d check with DPU_CTL_ACTIVE_CFG > >>>> > >>>> Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> > >>>> --- > >>>> drivers/gpu/drm/msm/Makefile | 1 + > >>>> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 30 + > >>>> .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 751 > >>>> +++++++++++++++++++++ > >>>> 3 files changed, 782 insertions(+) > >>>> create mode 100644 > >>>> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c > >>>> > >>>> diff --git a/drivers/gpu/drm/msm/Makefile > >>>> b/drivers/gpu/drm/msm/Makefile > >>>> index ca779c1..0387f22 100644 > >>>> --- a/drivers/gpu/drm/msm/Makefile > >>>> +++ b/drivers/gpu/drm/msm/Makefile > >>>> @@ -60,6 +60,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \ > >>>> disp/dpu1/dpu_encoder.o \ > >>>> disp/dpu1/dpu_encoder_phys_cmd.o \ > >>>> disp/dpu1/dpu_encoder_phys_vid.o \ > >>>> + disp/dpu1/dpu_encoder_phys_wb.o \ > >>>> disp/dpu1/dpu_formats.o \ > >>>> disp/dpu1/dpu_hw_catalog.o \ > >>>> disp/dpu1/dpu_hw_ctl.o \ > >>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h > >>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h > >>>> index 00951f3..5452f98 100644 > >>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h > >>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h > >>>> @@ -150,6 +150,7 @@ struct dpu_encoder_phys_ops { > >>>> * @INTR_IDX_PINGPONG: Pingpong done unterrupt for cmd mode panel > >>>> * @INTR_IDX_UNDERRUN: Underrun unterrupt for video and cmd mode > >>>> panel > >>>> * @INTR_IDX_RDPTR: Readpointer done unterrupt for cmd mode panel > >>>> + * @INTR_IDX_WB_DONE: Writeback fone interrupt for virtual connector > >>>> */ > >>>> enum dpu_intr_idx { > >>>> INTR_IDX_VSYNC, > >>>> @@ -157,6 +158,7 @@ enum dpu_intr_idx { > >>>> INTR_IDX_UNDERRUN, > >>>> INTR_IDX_CTL_START, > >>>> INTR_IDX_RDPTR, > >>>> + INTR_IDX_WB_DONE, > >>>> INTR_IDX_MAX, > >>>> }; > >>>> @@ -224,6 +226,27 @@ static inline int > >>>> dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys) > >>>> } > >>>> /** > >>>> + * struct dpu_encoder_phys_wb - sub-class of dpu_encoder_phys to > >>>> handle command > >>>> + * mode specific operations > >>>> + * @base: Baseclass physical encoder structure > >>>> + * @wbirq_refcount: Reference count of writeback interrupt > >>>> + * @wb_done_timeout_cnt: number of wb done irq timeout errors > >>>> + * @wb_cfg: writeback block config to store fb related details > >>>> + * @wb_conn: backpointer to writeback connector > >>>> + * @wb_job: backpointer to current writeback job > >>>> + * @dest: dpu buffer layout for current writeback output buffer > >>>> + */ > >>>> +struct dpu_encoder_phys_wb { > >>>> + struct dpu_encoder_phys base; > >>>> + atomic_t wbirq_refcount; > >>>> + int wb_done_timeout_cnt; > >>>> + struct dpu_hw_wb_cfg wb_cfg; > >>>> + struct drm_writeback_connector *wb_conn; > >>>> + struct drm_writeback_job *wb_job; > >>>> + struct dpu_hw_fmt_layout dest; > >>>> +}; > >>>> + > >>>> +/** > >>>> * struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to > >>>> handle command > >>>> * mode specific operations > >>>> * @base: Baseclass physical encoder structure > >>>> @@ -291,6 +314,13 @@ struct dpu_encoder_phys > >>>> *dpu_encoder_phys_cmd_init( > >>>> struct dpu_enc_phys_init_params *p); > >>>> /** > >>>> + * dpu_encoder_phys_wb_init - initialize writeback encoder > >>>> + * @init: Pointer to init info structure with initialization params > >>>> + */ > >>>> +struct dpu_encoder_phys *dpu_encoder_phys_wb_init( > >>>> + struct dpu_enc_phys_init_params *p); > >>>> + > >>>> +/** > >>>> * dpu_encoder_helper_trigger_start - control start helper function > >>>> * This helper function may be optionally specified by physical > >>>> * encoders if they require ctl_start triggering. > >>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c > >>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c > >>>> new file mode 100644 > >>>> index 0000000..128317fe > >>>> --- /dev/null > >>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c > >>>> @@ -0,0 +1,751 @@ > >>>> +// SPDX-License-Identifier: GPL-2.0-only > >>>> +/* > >>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights > >>>> reserved. > >>>> + */ > >>>> + > >>>> +#define pr_fmt(fmt) "[drm:%s:%d] " fmt, __func__, __LINE__ > >>>> + > >>>> +#include <linux/debugfs.h> > >>>> + > >>>> +#include "dpu_encoder_phys.h" > >>>> +#include "dpu_formats.h" > >>>> +#include "dpu_hw_top.h" > >>>> +#include "dpu_hw_wb.h" > >>>> +#include "dpu_hw_lm.h" > >>>> +#include "dpu_hw_blk.h" > >>>> +#include "dpu_hw_merge3d.h" > >>>> +#include "dpu_hw_interrupts.h" > >>>> +#include "dpu_core_irq.h" > >>>> +#include "dpu_vbif.h" > >>>> +#include "dpu_crtc.h" > >>>> +#include "disp/msm_disp_snapshot.h" > >>>> + > >>>> +#define DEFAULT_MAX_WRITEBACK_WIDTH 2048 > >>>> + > >>>> +#define to_dpu_encoder_phys_wb(x) \ > >>>> + container_of(x, struct dpu_encoder_phys_wb, base) > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_is_master - report wb always as master encoder > >>>> + */ > >>>> +static bool dpu_encoder_phys_wb_is_master(struct dpu_encoder_phys > >>>> *phys_enc) > >>>> +{ > >>>> + /* there is only one physical enc for dpu_writeback */ > >>>> + return true; > >>>> +} > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_set_ot_limit - set OT limit for writeback > >>>> interface > >>>> + * @phys_enc: Pointer to physical encoder > >>>> + */ > >>>> +static void dpu_encoder_phys_wb_set_ot_limit( > >>>> + struct dpu_encoder_phys *phys_enc) > >>>> +{ > >>>> + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; > >>>> + struct dpu_vbif_set_ot_params ot_params; > >>>> + > >>>> + memset(&ot_params, 0, sizeof(ot_params)); > >>>> + ot_params.xin_id = hw_wb->caps->xin_id; > >>>> + ot_params.num = hw_wb->idx - WB_0; > >>>> + ot_params.width = phys_enc->cached_mode.hdisplay; > >>>> + ot_params.height = phys_enc->cached_mode.vdisplay; > >>>> + ot_params.is_wfd = true; > >>>> + ot_params.frame_rate = drm_mode_vrefresh(&phys_enc->cached_mode); > >>>> + ot_params.vbif_idx = hw_wb->caps->vbif_idx; > >>>> + ot_params.clk_ctrl = hw_wb->caps->clk_ctrl; > >>>> + ot_params.rd = false; > >>>> + > >>>> + dpu_vbif_set_ot_limit(phys_enc->dpu_kms, &ot_params); > >>>> +} > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_set_qos_remap - set QoS remapper for writeback > >>>> + * @phys_enc: Pointer to physical encoder > >>>> + */ > >>>> +static void dpu_encoder_phys_wb_set_qos_remap( > >>>> + struct dpu_encoder_phys *phys_enc) > >>>> +{ > >>>> + struct dpu_hw_wb *hw_wb; > >>>> + struct dpu_vbif_set_qos_params qos_params; > >>>> + > >>>> + if (!phys_enc || !phys_enc->parent || !phys_enc->parent->crtc) { > >>>> + DPU_ERROR("invalid arguments\n"); > >>>> + return; > >>>> + } > >>>> + > >>>> + if (!phys_enc->hw_wb || !phys_enc->hw_wb->caps) { > >>>> + DPU_ERROR("invalid writeback hardware\n"); > >>>> + return; > >>>> + } > >>>> + > >>>> + hw_wb = phys_enc->hw_wb; > >>>> + > >>>> + memset(&qos_params, 0, sizeof(qos_params)); > >>>> + qos_params.vbif_idx = hw_wb->caps->vbif_idx; > >>>> + qos_params.xin_id = hw_wb->caps->xin_id; > >>>> + qos_params.clk_ctrl = hw_wb->caps->clk_ctrl; > >>>> + qos_params.num = hw_wb->idx - WB_0; > >>>> + qos_params.is_rt = false; > >>>> + > >>>> + DPU_DEBUG("[qos_remap] wb:%d vbif:%d xin:%d is_rt:%d\n", > >>>> + qos_params.num, > >>>> + qos_params.vbif_idx, > >>>> + qos_params.xin_id, qos_params.is_rt); > >>>> + > >>>> + dpu_vbif_set_qos_remap(phys_enc->dpu_kms, &qos_params); > >>>> +} > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_set_qos - set QoS/danger/safe LUTs for > >>>> writeback > >>>> + * @phys_enc: Pointer to physical encoder > >>>> + */ > >>>> +static void dpu_encoder_phys_wb_set_qos(struct dpu_encoder_phys > >>>> *phys_enc) > >>>> +{ > >>>> + struct dpu_hw_wb *hw_wb; > >>>> + struct dpu_hw_wb_qos_cfg qos_cfg; > >>>> + struct dpu_mdss_cfg *catalog; > >>>> + struct dpu_qos_lut_tbl *qos_lut_tb; > >>>> + > >>>> + if (!phys_enc || !phys_enc->dpu_kms || > >>>> !phys_enc->dpu_kms->catalog) { > >>>> + DPU_ERROR("invalid parameter(s)\n"); > >>>> + return; > >>>> + } > >>>> + > >>>> + catalog = phys_enc->dpu_kms->catalog; > >>>> + > >>>> + hw_wb = phys_enc->hw_wb; > >>>> + > >>>> + memset(&qos_cfg, 0, sizeof(struct dpu_hw_wb_qos_cfg)); > >>>> + qos_cfg.danger_safe_en = true; > >>>> + qos_cfg.danger_lut = > >>>> + catalog->perf.danger_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; > >>>> + > >>>> + qos_cfg.safe_lut = > >>>> catalog->perf.safe_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; > >>>> + > >>>> + qos_lut_tb = &catalog->perf.qos_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; > >>>> + qos_cfg.creq_lut = _dpu_hw_get_qos_lut(qos_lut_tb, 0); > >>>> + > >>>> + if (hw_wb->ops.setup_qos_lut) > >>>> + hw_wb->ops.setup_qos_lut(hw_wb, &qos_cfg); > >>>> +} > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_setup_fb - setup output framebuffer > >>>> + * @phys_enc: Pointer to physical encoder > >>>> + * @fb: Pointer to output framebuffer > >>>> + * @wb_roi: Pointer to output region of interest > >>>> + */ > >>>> +static void dpu_encoder_phys_wb_setup_fb(struct dpu_encoder_phys > >>>> *phys_enc, > >>>> + struct drm_framebuffer *fb) > >>>> +{ > >>>> + struct dpu_encoder_phys_wb *wb_enc = > >>>> to_dpu_encoder_phys_wb(phys_enc); > >>>> + struct dpu_hw_wb *hw_wb; > >>>> + struct dpu_hw_wb_cfg *wb_cfg; > >>>> + struct dpu_hw_wb_cdp_cfg cdp_cfg; > >>>> + > >>>> + if (!phys_enc || !phys_enc->dpu_kms || > >>>> !phys_enc->dpu_kms->catalog) { > >>>> + DPU_ERROR("invalid encoder\n"); > >>>> + return; > >>>> + } > >>>> + > >>>> + hw_wb = phys_enc->hw_wb; > >>>> + wb_cfg = &wb_enc->wb_cfg; > >>>> + > >>>> + wb_cfg->intf_mode = phys_enc->intf_mode; > >>>> + wb_cfg->roi.x1 = 0; > >>>> + wb_cfg->roi.x2 = phys_enc->cached_mode.hdisplay; > >>>> + wb_cfg->roi.y1 = 0; > >>>> + wb_cfg->roi.y2 = phys_enc->cached_mode.vdisplay; > >>>> + > >>>> + if (hw_wb->ops.setup_roi) > >>>> + hw_wb->ops.setup_roi(hw_wb, wb_cfg); > >>>> + > >>>> + if (hw_wb->ops.setup_outformat) > >>>> + hw_wb->ops.setup_outformat(hw_wb, wb_cfg); > >>>> + > >>>> + if (hw_wb->ops.setup_cdp) { > >>>> + memset(&cdp_cfg, 0, sizeof(struct dpu_hw_wb_cdp_cfg)); > >>>> + > >>>> + cdp_cfg.enable = phys_enc->dpu_kms->catalog->perf.cdp_cfg > >>>> + [DPU_PERF_CDP_USAGE_NRT].wr_enable; > >>>> + cdp_cfg.ubwc_meta_enable = > >>>> + DPU_FORMAT_IS_UBWC(wb_cfg->dest.format); > >>>> + cdp_cfg.tile_amortize_enable = > >>>> + DPU_FORMAT_IS_UBWC(wb_cfg->dest.format) || > >>>> + DPU_FORMAT_IS_TILE(wb_cfg->dest.format); > >>>> + cdp_cfg.preload_ahead = DPU_WB_CDP_PRELOAD_AHEAD_64; > >>>> + > >>>> + hw_wb->ops.setup_cdp(hw_wb, &cdp_cfg); > >>>> + } > >>>> + > >>>> + if (hw_wb->ops.setup_outaddress) > >>>> + hw_wb->ops.setup_outaddress(hw_wb, wb_cfg); > >>>> +} > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_setup_cdp - setup chroma down prefetch block > >>>> + * @phys_enc:Pointer to physical encoder > >>>> + */ > >>>> +static void dpu_encoder_phys_wb_setup_cdp(struct dpu_encoder_phys > >>>> *phys_enc) > >>>> +{ > >>>> + struct dpu_hw_wb *hw_wb; > >>>> + struct dpu_hw_ctl *ctl; > >>>> + > >>>> + if (!phys_enc) { > >>>> + DPU_ERROR("invalid encoder\n"); > >>>> + return; > >>>> + } > >>>> + > >>>> + hw_wb = phys_enc->hw_wb; > >>>> + ctl = phys_enc->hw_ctl; > >>>> + > >>>> + if (test_bit(DPU_CTL_ACTIVE_CFG, &ctl->caps->features) && > >>>> + (phys_enc->hw_ctl && > >>>> + phys_enc->hw_ctl->ops.setup_intf_cfg)) { > >>>> + struct dpu_hw_intf_cfg intf_cfg = {0}; > >>>> + struct dpu_hw_pingpong *hw_pp = phys_enc->hw_pp; > >>>> + enum dpu_3d_blend_mode mode_3d; > >>>> + > >>>> + mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc); > >>>> + > >>>> + intf_cfg.intf = DPU_NONE; > >>>> + intf_cfg.wb = hw_wb->idx; > >>>> + > >>>> + if (mode_3d && hw_pp && hw_pp->merge_3d) > >>>> + intf_cfg.merge_3d = hw_pp->merge_3d->idx; > >>>> + > >>>> + if (phys_enc->hw_pp->merge_3d && > >>>> phys_enc->hw_pp->merge_3d->ops.setup_3d_mode) > >>>> + > >>>> phys_enc->hw_pp->merge_3d->ops.setup_3d_mode(phys_enc->hw_pp->merge_3d, > >>>> + mode_3d); > >>>> + > >>>> + /* setup which pp blk will connect to this wb */ > >>>> + if (hw_pp && phys_enc->hw_wb->ops.bind_pingpong_blk) > >>>> + phys_enc->hw_wb->ops.bind_pingpong_blk(phys_enc->hw_wb, > >>>> true, > >>>> + phys_enc->hw_pp->idx); > >>>> + > >>>> + phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl, > >>>> &intf_cfg); > >>>> + } else if (phys_enc->hw_ctl && > >>>> phys_enc->hw_ctl->ops.setup_intf_cfg) { > >>>> + struct dpu_hw_intf_cfg intf_cfg = {0}; > >>>> + > >>>> + intf_cfg.intf = DPU_NONE; > >>>> + intf_cfg.wb = hw_wb->idx; > >>>> + intf_cfg.mode_3d = > >>>> + dpu_encoder_helper_get_3d_blend_mode(phys_enc); > >>>> + phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl, > >>>> &intf_cfg); > >>>> + } > >>>> +} > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_atomic_check - verify and fixup given atomic > >>>> states > >>>> + * @phys_enc: Pointer to physical encoder > >>>> + * @crtc_state: Pointer to CRTC atomic state > >>>> + * @conn_state: Pointer to connector atomic state > >>>> + */ > >>>> +static int dpu_encoder_phys_wb_atomic_check( > >>>> + struct dpu_encoder_phys *phys_enc, > >>>> + struct drm_crtc_state *crtc_state, > >>>> + struct drm_connector_state *conn_state) > >>>> +{ > >>>> + struct drm_framebuffer *fb; > >>>> + const struct drm_display_mode *mode; > >>>> + > >>>> + DPU_DEBUG("[atomic_check:%d, \"%s\",%d,%d]\n", > >>>> + phys_enc->intf_idx, mode->name, mode->hdisplay, > >>>> mode->vdisplay); > >>>> + > >>>> + if (!conn_state->writeback_job || !conn_state->writeback_job->fb) > >>>> + return 0; > >>>> + > >>>> + fb = conn_state->writeback_job->fb; > >>>> + mode = &crtc_state->mode; > >>>> + > >>>> + if (!conn_state || !conn_state->connector) { > >>>> + DPU_ERROR("invalid connector state\n"); > >>>> + return -EINVAL; > >>>> + } else if (conn_state->connector->status != > >>>> + connector_status_connected) { > >>>> + DPU_ERROR("connector not connected %d\n", > >>>> + conn_state->connector->status); > >>>> + return -EINVAL; > >>>> + } > >>>> + > >>>> + DPU_DEBUG("[fb_id:%u][fb:%u,%u]\n", fb->base.id, > >>>> + fb->width, fb->height); > >>>> + > >>>> + if (fb->width != mode->hdisplay) { > >>>> + DPU_ERROR("invalid fb w=%d, mode w=%d\n", fb->width, > >>>> + mode->hdisplay); > >>>> + return -EINVAL; > >>>> + } else if (fb->height != mode->vdisplay) { > >>>> + DPU_ERROR("invalid fb h=%d, mode h=%d\n", fb->height, > >>>> + mode->vdisplay); > >>>> + return -EINVAL; > >>>> + } else if (fb->width > DEFAULT_MAX_WRITEBACK_WIDTH) { > >>>> + DPU_ERROR("invalid fb w=%d, maxlinewidth=%u\n", > >>>> + fb->width, DEFAULT_MAX_WRITEBACK_WIDTH); > >>>> + return -EINVAL; > >>>> + } > >>> > >>> Being not an expert in the DRM WB API, I have a question: are those > >>> hardware limitations or the DRM requirement that we can not write to > >>> the region inside the attached FB? > >> > >> Both. The first two checks are indeed DRM requirement and infact igt > >> writeback tests this to ensure that the driver rejects any invalid FBs > >> which are not equal to the mode that was set. > >> > >> https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/blob/master/tests/kms_writeback.c#L409 > > > > > > The test is writing to the fb which is smaller than the used video mode > > (which is an obvious mistake). Is it correst to write back to the FB > > that is bigger than the selected resolution? > > Ah, so your question is whether writeback can just write to a portion of > the larger FB. > > Yes, its possible . So thats another follow-up feature to support WB_ROI. > > WB can be made to program a smaller ROI in the larger buffer. It is > possible. Just not supported in this version and even downstream even > though the code is present, its not verified extensively. > > When we add support for it, we will relax these conditions based on the > feature. Ok, thanks for the info. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > > > >> The last check is coming from our hardware > > >>> > >>>> + > >>>> + return 0; > >>>> +} > >>>> + > >>>> + > >>>> +/** > >>>> + * _dpu_encoder_phys_wb_update_flush - flush hardware update > >>>> + * @phys_enc: Pointer to physical encoder > >>>> + */ > >>>> +static void _dpu_encoder_phys_wb_update_flush(struct > >>>> dpu_encoder_phys *phys_enc) > >>>> +{ > >>>> + struct dpu_hw_wb *hw_wb; > >>>> + struct dpu_hw_ctl *hw_ctl; > >>>> + struct dpu_hw_pingpong *hw_pp; > >>>> + u32 pending_flush = 0; > >>>> + > >>>> + if (!phys_enc) > >>>> + return; > >>>> + > >>>> + hw_wb = phys_enc->hw_wb; > >>>> + hw_pp = phys_enc->hw_pp; > >>>> + hw_ctl = phys_enc->hw_ctl; > >>>> + > >>>> + DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); > >>>> + > >>>> + if (!hw_ctl) { > >>>> + DPU_DEBUG("[wb:%d] no ctl assigned\n", hw_wb->idx - WB_0); > >>>> + return; > >>>> + } > >>>> + > >>>> + if (hw_ctl->ops.update_pending_flush_wb) > >>>> + hw_ctl->ops.update_pending_flush_wb(hw_ctl, hw_wb->idx); > >>>> + > >>>> + if (hw_ctl->ops.update_pending_flush_merge_3d && hw_pp && > >>>> hw_pp->merge_3d) > >>>> + hw_ctl->ops.update_pending_flush_merge_3d(hw_ctl, > >>>> + hw_pp->merge_3d->idx); > >>>> + > >>>> + if (hw_ctl->ops.get_pending_flush) > >>>> + pending_flush = hw_ctl->ops.get_pending_flush(hw_ctl); > >>>> + > >>>> + DPU_DEBUG("Pending flush mask for CTL_%d is 0x%x, WB %d\n", > >>>> + hw_ctl->idx - CTL_0, pending_flush, > >>>> + hw_wb->idx - WB_0); > >>>> +} > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_setup - setup writeback encoder > >>>> + * @phys_enc: Pointer to physical encoder > >>>> + */ > >>>> +static void dpu_encoder_phys_wb_setup( > >>>> + struct dpu_encoder_phys *phys_enc) > >>>> +{ > >>>> + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; > >>>> + struct drm_display_mode mode = phys_enc->cached_mode; > >>>> + struct drm_framebuffer *fb = NULL; > >>>> + > >>>> + DPU_DEBUG("[mode_set:%d, \"%s\",%d,%d]\n", > >>>> + hw_wb->idx - WB_0, mode.name, > >>>> + mode.hdisplay, mode.vdisplay); > >>>> + > >>>> + dpu_encoder_phys_wb_set_ot_limit(phys_enc); > >>>> + > >>>> + dpu_encoder_phys_wb_set_qos_remap(phys_enc); > >>>> + > >>>> + dpu_encoder_phys_wb_set_qos(phys_enc); > >>>> + > >>>> + dpu_encoder_phys_wb_setup_fb(phys_enc, fb); > >>>> + > >>>> + dpu_encoder_phys_wb_setup_cdp(phys_enc); > >>>> + > >>>> +} > >>>> + > >>>> +static void _dpu_encoder_phys_wb_frame_done_helper(void *arg) > >>>> +{ > >>>> + struct dpu_encoder_phys *phys_enc = arg; > >>>> + struct dpu_encoder_phys_wb *wb_enc = > >>>> to_dpu_encoder_phys_wb(phys_enc); > >>>> + > >>>> + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; > >>>> + unsigned long lock_flags; > >>>> + u32 event = DPU_ENCODER_FRAME_EVENT_DONE; > >>>> + > >>>> + DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); > >>>> + > >>>> + if (phys_enc->parent_ops->handle_frame_done) > >>>> + phys_enc->parent_ops->handle_frame_done(phys_enc->parent, > >>>> + phys_enc, event); > >>>> + > >>>> + if (phys_enc->parent_ops->handle_vblank_virt) > >>>> + phys_enc->parent_ops->handle_vblank_virt(phys_enc->parent, > >>>> + phys_enc); > >>>> + > >>>> + spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags); > >>>> + atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0); > >>>> + spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags); > >>>> + > >>>> + if (wb_enc->wb_conn) > >>>> + drm_writeback_signal_completion(wb_enc->wb_conn, 0); > >>>> + > >>>> + /* Signal any waiting atomic commit thread */ > >>>> + wake_up_all(&phys_enc->pending_kickoff_wq); > >>>> +} > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_done_irq - writeback interrupt handler > >>>> + * @arg: Pointer to writeback encoder > >>>> + * @irq_idx: interrupt index > >>>> + */ > >>>> +static void dpu_encoder_phys_wb_done_irq(void *arg, int irq_idx) > >>>> +{ > >>>> + _dpu_encoder_phys_wb_frame_done_helper(arg); > >>>> +} > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_irq_ctrl - irq control of WB > >>>> + * @phys: Pointer to physical encoder > >>>> + * @enable: indicates enable or disable interrupts > >>>> + */ > >>>> +static void dpu_encoder_phys_wb_irq_ctrl( > >>>> + struct dpu_encoder_phys *phys, bool enable) > >>>> +{ > >>>> + > >>>> + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys); > >>>> + int ret = 0; > >>>> + int refcount; > >>>> + > >>>> + refcount = atomic_read(&wb_enc->wbirq_refcount); > >>>> + > >>>> + if (enable && atomic_inc_return(&wb_enc->wbirq_refcount) == 1) { > >>>> + dpu_core_irq_register_callback(phys->dpu_kms, > >>>> + phys->irq[INTR_IDX_WB_DONE], > >>>> dpu_encoder_phys_wb_done_irq, phys); > >>>> + if (ret) > >>>> + atomic_dec_return(&wb_enc->wbirq_refcount); > >>>> + } else if (!enable && > >>>> + atomic_dec_return(&wb_enc->wbirq_refcount) == 0) { > >>>> + dpu_core_irq_unregister_callback(phys->dpu_kms, > >>>> phys->irq[INTR_IDX_WB_DONE]); > >>>> + if (ret) > >>>> + atomic_inc_return(&wb_enc->wbirq_refcount); > >>>> + } > >>>> +} > >>>> + > >>>> +static void dpu_encoder_phys_wb_atomic_mode_set( > >>>> + struct dpu_encoder_phys *phys_enc, > >>>> + struct drm_crtc_state *crtc_state, > >>>> + struct drm_connector_state *conn_state) > >>>> +{ > >>>> + > >>>> + phys_enc->irq[INTR_IDX_WB_DONE] = > >>>> phys_enc->hw_wb->caps->intr_wb_done; > >>>> +} > >>>> + > >>>> +static void _dpu_encoder_phys_wb_handle_wbdone_timeout( > >>>> + struct dpu_encoder_phys *phys_enc) > >>>> +{ > >>>> + struct dpu_encoder_phys_wb *wb_enc = > >>>> to_dpu_encoder_phys_wb(phys_enc); > >>>> + u32 frame_event = DPU_ENCODER_FRAME_EVENT_ERROR; > >>>> + > >>>> + wb_enc->wb_done_timeout_cnt++; > >>>> + > >>>> + if (wb_enc->wb_done_timeout_cnt == 1) > >>>> + msm_disp_snapshot_state(phys_enc->parent->dev); > >>>> + > >>>> + atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0); > >>>> + > >>>> + /* request a ctl reset before the next kickoff */ > >>>> + phys_enc->enable_state = DPU_ENC_ERR_NEEDS_HW_RESET; > >>>> + > >>>> + if (wb_enc->wb_conn) > >>>> + drm_writeback_signal_completion(wb_enc->wb_conn, 0); > >>>> + > >>>> + if (phys_enc->parent_ops->handle_frame_done) > >>>> + phys_enc->parent_ops->handle_frame_done( > >>>> + phys_enc->parent, phys_enc, frame_event); > >>>> +} > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_wait_for_commit_done - wait until request is > >>>> committed > >>>> + * @phys_enc: Pointer to physical encoder > >>>> + */ > >>>> +static int dpu_encoder_phys_wb_wait_for_commit_done( > >>>> + struct dpu_encoder_phys *phys_enc) > >>>> +{ > >>>> + unsigned long ret; > >>>> + struct dpu_encoder_wait_info wait_info; > >>>> + struct dpu_encoder_phys_wb *wb_enc = > >>>> to_dpu_encoder_phys_wb(phys_enc); > >>>> + > >>>> + wait_info.wq = &phys_enc->pending_kickoff_wq; > >>>> + wait_info.atomic_cnt = &phys_enc->pending_kickoff_cnt; > >>>> + wait_info.timeout_ms = KICKOFF_TIMEOUT_MS; > >>>> + > >>>> + ret = dpu_encoder_helper_wait_for_irq(phys_enc, INTR_IDX_WB_DONE, > >>>> + dpu_encoder_phys_wb_done_irq, &wait_info); > >>>> + if (ret == -ETIMEDOUT) > >>>> + _dpu_encoder_phys_wb_handle_wbdone_timeout(phys_enc); > >>>> + else if (!ret) > >>>> + wb_enc->wb_done_timeout_cnt = 0; > >>>> + > >>>> + return ret; > >>>> +} > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_prepare_for_kickoff - pre-kickoff processing > >>>> + * @phys_enc: Pointer to physical encoder > >>>> + * Returns: Zero on success > >>>> + */ > >>>> +static void dpu_encoder_phys_wb_prepare_for_kickoff( > >>>> + struct dpu_encoder_phys *phys_enc) > >>>> +{ > >>>> + struct dpu_encoder_phys_wb *wb_enc = > >>>> to_dpu_encoder_phys_wb(phys_enc); > >>>> + struct drm_connector *drm_conn; > >>>> + struct drm_connector_state *state; > >>>> + > >>>> + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); > >>>> + > >>>> + if (!wb_enc->wb_conn || !wb_enc->wb_job) { > >>>> + DPU_ERROR("invalid wb_conn or wb_job\n"); > >>>> + return; > >>>> + } > >>>> + > >>>> + drm_conn = &wb_enc->wb_conn->base; > >>>> + state = drm_conn->state; > >>>> + > >>>> + if (wb_enc->wb_conn && wb_enc->wb_job) > >>>> + drm_writeback_queue_job(wb_enc->wb_conn, state); > >>>> + > >>>> + dpu_encoder_phys_wb_setup(phys_enc); > >>>> + > >>>> + _dpu_encoder_phys_wb_update_flush(phys_enc); > >>>> +} > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_needs_single_flush - trigger flush processing > >>>> + * @phys_enc: Pointer to physical encoder > >>>> + */ > >>>> +static bool dpu_encoder_phys_wb_needs_single_flush(struct > >>>> dpu_encoder_phys *phys_enc) > >>>> +{ > >>>> + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); > >>>> + return false; > >>>> +} > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_handle_post_kickoff - post-kickoff processing > >>>> + * @phys_enc: Pointer to physical encoder > >>>> + */ > >>>> +static void dpu_encoder_phys_wb_handle_post_kickoff( > >>>> + struct dpu_encoder_phys *phys_enc) > >>>> +{ > >>>> + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); > >>>> + > >>>> +} > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_enable - enable writeback encoder > >>>> + * @phys_enc: Pointer to physical encoder > >>>> + */ > >>>> +static void dpu_encoder_phys_wb_enable(struct dpu_encoder_phys > >>>> *phys_enc) > >>>> +{ > >>>> + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); > >>>> + phys_enc->enable_state = DPU_ENC_ENABLED; > >>>> +} > >>>> +/** > >>>> + * dpu_encoder_phys_wb_disable - disable writeback encoder > >>>> + * @phys_enc: Pointer to physical encoder > >>>> + */ > >>>> +static void dpu_encoder_phys_wb_disable(struct dpu_encoder_phys > >>>> *phys_enc) > >>>> +{ > >>>> + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; > >>>> + struct dpu_hw_ctl *hw_ctl = phys_enc->hw_ctl; > >>>> + > >>>> + DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); > >>>> + > >>>> + if (phys_enc->enable_state == DPU_ENC_DISABLED) { > >>>> + DPU_ERROR("encoder is already disabled\n"); > >>>> + return; > >>>> + } > >>>> + > >>>> + /* reset h/w before final flush */ > >>>> + if (phys_enc->hw_ctl->ops.clear_pending_flush) > >>>> + phys_enc->hw_ctl->ops.clear_pending_flush(phys_enc->hw_ctl); > >>>> + > >>>> + /* > >>>> + * New CTL reset sequence from 5.0 MDP onwards. > >>>> + * If has_3d_merge_reset is not set, legacy reset > >>>> + * sequence is executed. > >>>> + * > >>>> + * Legacy reset sequence has not been implemented yet. > >>>> + * Any target earlier than SM8150 will need it and when > >>>> + * WB support is added to those targets will need to add > >>>> + * the legacy teardown sequence as well. > >>>> + */ > >>>> + if (hw_ctl->caps->features & BIT(DPU_CTL_ACTIVE_CFG)) > >>>> + dpu_encoder_helper_phys_cleanup(phys_enc); > >>>> + > >>>> + phys_enc->enable_state = DPU_ENC_DISABLED; > >>>> +} > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_destroy - destroy writeback encoder > >>>> + * @phys_enc: Pointer to physical encoder > >>>> + */ > >>>> +static void dpu_encoder_phys_wb_destroy(struct dpu_encoder_phys > >>>> *phys_enc) > >>>> +{ > >>>> + DPU_DEBUG("[wb:%d]\n", phys_enc->intf_idx - INTF_0); > >>>> + > >>>> + if (!phys_enc) > >>>> + return; > >>>> + > >>>> + kfree(phys_enc); > >>>> +} > >>>> + > >>>> +static void dpu_encoder_phys_wb_prepare_wb_job(struct > >>>> dpu_encoder_phys *phys_enc, > >>>> + struct drm_writeback_job *job) > >>>> +{ > >>>> + const struct msm_format *format; > >>>> + struct msm_gem_address_space *aspace; > >>>> + struct dpu_hw_wb_cfg *wb_cfg; > >>>> + int ret; > >>>> + struct dpu_encoder_phys_wb *wb_enc = > >>>> to_dpu_encoder_phys_wb(phys_enc); > >>>> + > >>>> + if (!job->fb) > >>>> + return; > >>>> + > >>>> + wb_enc->wb_job = job; > >>>> + wb_enc->wb_conn = job->connector; > >>>> + aspace = phys_enc->dpu_kms->base.aspace; > >>>> + > >>>> + wb_cfg = &wb_enc->wb_cfg; > >>>> + > >>>> + memset(wb_cfg, 0, sizeof(struct dpu_hw_wb_cfg)); > >>>> + > >>>> + ret = msm_framebuffer_prepare(job->fb, aspace, false); > >>>> + if (ret) { > >>>> + DPU_ERROR("prep fb failed, %d\n", ret); > >>>> + return; > >>>> + } > >>>> + > >>>> + format = msm_framebuffer_format(job->fb); > >>>> + > >>>> + wb_cfg->dest.format = dpu_get_dpu_format_ext( > >>>> + format->pixel_format, job->fb->modifier); > >>>> + if (!wb_cfg->dest.format) { > >>>> + /* this error should be detected during atomic_check */ > >>>> + DPU_ERROR("failed to get format %x\n", format->pixel_format); > >>>> + return; > >>>> + } > >>>> + > >>>> + ret = dpu_format_populate_layout(aspace, job->fb, &wb_cfg->dest); > >>>> + if (ret) { > >>>> + DPU_DEBUG("failed to populate layout %d\n", ret); > >>>> + return; > >>>> + } > >>>> + > >>>> + wb_cfg->dest.width = job->fb->width; > >>>> + wb_cfg->dest.height = job->fb->height; > >>>> + wb_cfg->dest.num_planes = wb_cfg->dest.format->num_planes; > >>>> + > >>>> + if ((wb_cfg->dest.format->fetch_planes == DPU_PLANE_PLANAR) && > >>>> + (wb_cfg->dest.format->element[0] == C1_B_Cb)) > >>>> + swap(wb_cfg->dest.plane_addr[1], wb_cfg->dest.plane_addr[2]); > >>>> + > >>>> + DPU_DEBUG("[fb_offset:%8.8x,%8.8x,%8.8x,%8.8x]\n", > >>>> + wb_cfg->dest.plane_addr[0], wb_cfg->dest.plane_addr[1], > >>>> + wb_cfg->dest.plane_addr[2], wb_cfg->dest.plane_addr[3]); > >>>> + > >>>> + DPU_DEBUG("[fb_stride:%8.8x,%8.8x,%8.8x,%8.8x]\n", > >>>> + wb_cfg->dest.plane_pitch[0], wb_cfg->dest.plane_pitch[1], > >>>> + wb_cfg->dest.plane_pitch[2], wb_cfg->dest.plane_pitch[3]); > >>>> +} > >>>> + > >>>> +static void dpu_encoder_phys_wb_cleanup_wb_job(struct > >>>> dpu_encoder_phys *phys_enc, > >>>> + struct drm_writeback_job *job) > >>>> +{ > >>>> + struct dpu_encoder_phys_wb *wb_enc = > >>>> to_dpu_encoder_phys_wb(phys_enc); > >>>> + struct msm_gem_address_space *aspace; > >>>> + > >>>> + if (!job->fb) > >>>> + return; > >>>> + > >>>> + aspace = phys_enc->dpu_kms->base.aspace; > >>>> + > >>>> + msm_framebuffer_cleanup(job->fb, aspace, false); > >>>> + wb_enc->wb_job = NULL; > >>>> + wb_enc->wb_conn = NULL; > >>>> +} > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_init_ops - initialize writeback operations > >>>> + * @ops: Pointer to encoder operation table > >>>> + */ > >>>> +static void dpu_encoder_phys_wb_init_ops(struct > >>>> dpu_encoder_phys_ops *ops) > >>>> +{ > >>>> + ops->is_master = dpu_encoder_phys_wb_is_master; > >>>> + ops->atomic_mode_set = dpu_encoder_phys_wb_atomic_mode_set; > >>>> + ops->enable = dpu_encoder_phys_wb_enable; > >>>> + ops->disable = dpu_encoder_phys_wb_disable; > >>>> + ops->destroy = dpu_encoder_phys_wb_destroy; > >>>> + ops->atomic_check = dpu_encoder_phys_wb_atomic_check; > >>>> + ops->wait_for_commit_done = > >>>> dpu_encoder_phys_wb_wait_for_commit_done; > >>>> + ops->prepare_for_kickoff = > >>>> dpu_encoder_phys_wb_prepare_for_kickoff; > >>>> + ops->handle_post_kickoff = > >>>> dpu_encoder_phys_wb_handle_post_kickoff; > >>>> + ops->needs_single_flush = dpu_encoder_phys_wb_needs_single_flush; > >>>> + ops->trigger_start = dpu_encoder_helper_trigger_start; > >>>> + ops->prepare_wb_job = dpu_encoder_phys_wb_prepare_wb_job; > >>>> + ops->cleanup_wb_job = dpu_encoder_phys_wb_cleanup_wb_job; > >>>> + ops->irq_control = dpu_encoder_phys_wb_irq_ctrl; > >>>> +} > >>>> + > >>>> +/** > >>>> + * dpu_encoder_phys_wb_init - initialize writeback encoder > >>>> + * @init: Pointer to init info structure with initialization params > >>>> + */ > >>>> +struct dpu_encoder_phys *dpu_encoder_phys_wb_init( > >>>> + struct dpu_enc_phys_init_params *p) > >>>> +{ > >>>> + struct dpu_encoder_phys *phys_enc = NULL; > >>>> + struct dpu_encoder_phys_wb *wb_enc = NULL; > >>>> + int ret = 0; > >>>> + int i; > >>>> + > >>>> + DPU_DEBUG("\n"); > >>>> + > >>>> + if (!p || !p->parent) { > >>>> + DPU_ERROR("invalid params\n"); > >>>> + ret = -EINVAL; > >>>> + goto fail_alloc; > >>>> + } > >>>> + > >>>> + wb_enc = kzalloc(sizeof(*wb_enc), GFP_KERNEL); > >>>> + if (!wb_enc) { > >>>> + DPU_ERROR("failed to allocate wb phys_enc enc\n"); > >>>> + ret = -ENOMEM; > >>>> + goto fail_alloc; > >>>> + } > >>>> + > >>>> + phys_enc = &wb_enc->base; > >>>> + phys_enc->hw_mdptop = p->dpu_kms->hw_mdp; > >>>> + phys_enc->intf_idx = p->intf_idx; > >>>> + > >>>> + dpu_encoder_phys_wb_init_ops(&phys_enc->ops); > >>>> + phys_enc->parent = p->parent; > >>>> + phys_enc->parent_ops = p->parent_ops; > >>>> + phys_enc->dpu_kms = p->dpu_kms; > >>>> + phys_enc->split_role = p->split_role; > >>>> + phys_enc->intf_mode = INTF_MODE_WB_LINE; > >>>> + phys_enc->intf_idx = p->intf_idx; > >>>> + phys_enc->enc_spinlock = p->enc_spinlock; > >>>> + > >>>> + atomic_set(&wb_enc->wbirq_refcount, 0); > >>>> + > >>>> + for (i = 0; i < ARRAY_SIZE(phys_enc->irq); i++) > >>>> + phys_enc->irq[i] = -EINVAL; > >>>> + > >>>> + atomic_set(&phys_enc->pending_kickoff_cnt, 0); > >>>> + atomic_set(&phys_enc->vblank_refcount, 0); > >>>> + wb_enc->wb_done_timeout_cnt = 0; > >>>> + > >>>> + init_waitqueue_head(&phys_enc->pending_kickoff_wq); > >>>> + phys_enc->enable_state = DPU_ENC_DISABLED; > >>>> + > >>>> + DPU_DEBUG("Created dpu_encoder_phys for wb %d\n", > >>>> + phys_enc->intf_idx); > >>>> + > >>>> + return phys_enc; > >>>> + > >>>> +fail_alloc: > >>>> + return ERR_PTR(ret); > >>>> +} > >>> > >>> > > > >
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile index ca779c1..0387f22 100644 --- a/drivers/gpu/drm/msm/Makefile +++ b/drivers/gpu/drm/msm/Makefile @@ -60,6 +60,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \ disp/dpu1/dpu_encoder.o \ disp/dpu1/dpu_encoder_phys_cmd.o \ disp/dpu1/dpu_encoder_phys_vid.o \ + disp/dpu1/dpu_encoder_phys_wb.o \ disp/dpu1/dpu_formats.o \ disp/dpu1/dpu_hw_catalog.o \ disp/dpu1/dpu_hw_ctl.o \ diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h index 00951f3..5452f98 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h @@ -150,6 +150,7 @@ struct dpu_encoder_phys_ops { * @INTR_IDX_PINGPONG: Pingpong done unterrupt for cmd mode panel * @INTR_IDX_UNDERRUN: Underrun unterrupt for video and cmd mode panel * @INTR_IDX_RDPTR: Readpointer done unterrupt for cmd mode panel + * @INTR_IDX_WB_DONE: Writeback fone interrupt for virtual connector */ enum dpu_intr_idx { INTR_IDX_VSYNC, @@ -157,6 +158,7 @@ enum dpu_intr_idx { INTR_IDX_UNDERRUN, INTR_IDX_CTL_START, INTR_IDX_RDPTR, + INTR_IDX_WB_DONE, INTR_IDX_MAX, }; @@ -224,6 +226,27 @@ static inline int dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys) } /** + * struct dpu_encoder_phys_wb - sub-class of dpu_encoder_phys to handle command + * mode specific operations + * @base: Baseclass physical encoder structure + * @wbirq_refcount: Reference count of writeback interrupt + * @wb_done_timeout_cnt: number of wb done irq timeout errors + * @wb_cfg: writeback block config to store fb related details + * @wb_conn: backpointer to writeback connector + * @wb_job: backpointer to current writeback job + * @dest: dpu buffer layout for current writeback output buffer + */ +struct dpu_encoder_phys_wb { + struct dpu_encoder_phys base; + atomic_t wbirq_refcount; + int wb_done_timeout_cnt; + struct dpu_hw_wb_cfg wb_cfg; + struct drm_writeback_connector *wb_conn; + struct drm_writeback_job *wb_job; + struct dpu_hw_fmt_layout dest; +}; + +/** * struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to handle command * mode specific operations * @base: Baseclass physical encoder structure @@ -291,6 +314,13 @@ struct dpu_encoder_phys *dpu_encoder_phys_cmd_init( struct dpu_enc_phys_init_params *p); /** + * dpu_encoder_phys_wb_init - initialize writeback encoder + * @init: Pointer to init info structure with initialization params + */ +struct dpu_encoder_phys *dpu_encoder_phys_wb_init( + struct dpu_enc_phys_init_params *p); + +/** * dpu_encoder_helper_trigger_start - control start helper function * This helper function may be optionally specified by physical * encoders if they require ctl_start triggering. diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c new file mode 100644 index 0000000..128317fe --- /dev/null +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c @@ -0,0 +1,751 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#define pr_fmt(fmt) "[drm:%s:%d] " fmt, __func__, __LINE__ + +#include <linux/debugfs.h> + +#include "dpu_encoder_phys.h" +#include "dpu_formats.h" +#include "dpu_hw_top.h" +#include "dpu_hw_wb.h" +#include "dpu_hw_lm.h" +#include "dpu_hw_blk.h" +#include "dpu_hw_merge3d.h" +#include "dpu_hw_interrupts.h" +#include "dpu_core_irq.h" +#include "dpu_vbif.h" +#include "dpu_crtc.h" +#include "disp/msm_disp_snapshot.h" + +#define DEFAULT_MAX_WRITEBACK_WIDTH 2048 + +#define to_dpu_encoder_phys_wb(x) \ + container_of(x, struct dpu_encoder_phys_wb, base) + +/** + * dpu_encoder_phys_wb_is_master - report wb always as master encoder + */ +static bool dpu_encoder_phys_wb_is_master(struct dpu_encoder_phys *phys_enc) +{ + /* there is only one physical enc for dpu_writeback */ + return true; +} + +/** + * dpu_encoder_phys_wb_set_ot_limit - set OT limit for writeback interface + * @phys_enc: Pointer to physical encoder + */ +static void dpu_encoder_phys_wb_set_ot_limit( + struct dpu_encoder_phys *phys_enc) +{ + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; + struct dpu_vbif_set_ot_params ot_params; + + memset(&ot_params, 0, sizeof(ot_params)); + ot_params.xin_id = hw_wb->caps->xin_id; + ot_params.num = hw_wb->idx - WB_0; + ot_params.width = phys_enc->cached_mode.hdisplay; + ot_params.height = phys_enc->cached_mode.vdisplay; + ot_params.is_wfd = true; + ot_params.frame_rate = drm_mode_vrefresh(&phys_enc->cached_mode); + ot_params.vbif_idx = hw_wb->caps->vbif_idx; + ot_params.clk_ctrl = hw_wb->caps->clk_ctrl; + ot_params.rd = false; + + dpu_vbif_set_ot_limit(phys_enc->dpu_kms, &ot_params); +} + +/** + * dpu_encoder_phys_wb_set_qos_remap - set QoS remapper for writeback + * @phys_enc: Pointer to physical encoder + */ +static void dpu_encoder_phys_wb_set_qos_remap( + struct dpu_encoder_phys *phys_enc) +{ + struct dpu_hw_wb *hw_wb; + struct dpu_vbif_set_qos_params qos_params; + + if (!phys_enc || !phys_enc->parent || !phys_enc->parent->crtc) { + DPU_ERROR("invalid arguments\n"); + return; + } + + if (!phys_enc->hw_wb || !phys_enc->hw_wb->caps) { + DPU_ERROR("invalid writeback hardware\n"); + return; + } + + hw_wb = phys_enc->hw_wb; + + memset(&qos_params, 0, sizeof(qos_params)); + qos_params.vbif_idx = hw_wb->caps->vbif_idx; + qos_params.xin_id = hw_wb->caps->xin_id; + qos_params.clk_ctrl = hw_wb->caps->clk_ctrl; + qos_params.num = hw_wb->idx - WB_0; + qos_params.is_rt = false; + + DPU_DEBUG("[qos_remap] wb:%d vbif:%d xin:%d is_rt:%d\n", + qos_params.num, + qos_params.vbif_idx, + qos_params.xin_id, qos_params.is_rt); + + dpu_vbif_set_qos_remap(phys_enc->dpu_kms, &qos_params); +} + +/** + * dpu_encoder_phys_wb_set_qos - set QoS/danger/safe LUTs for writeback + * @phys_enc: Pointer to physical encoder + */ +static void dpu_encoder_phys_wb_set_qos(struct dpu_encoder_phys *phys_enc) +{ + struct dpu_hw_wb *hw_wb; + struct dpu_hw_wb_qos_cfg qos_cfg; + struct dpu_mdss_cfg *catalog; + struct dpu_qos_lut_tbl *qos_lut_tb; + + if (!phys_enc || !phys_enc->dpu_kms || !phys_enc->dpu_kms->catalog) { + DPU_ERROR("invalid parameter(s)\n"); + return; + } + + catalog = phys_enc->dpu_kms->catalog; + + hw_wb = phys_enc->hw_wb; + + memset(&qos_cfg, 0, sizeof(struct dpu_hw_wb_qos_cfg)); + qos_cfg.danger_safe_en = true; + qos_cfg.danger_lut = + catalog->perf.danger_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; + + qos_cfg.safe_lut = catalog->perf.safe_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; + + qos_lut_tb = &catalog->perf.qos_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; + qos_cfg.creq_lut = _dpu_hw_get_qos_lut(qos_lut_tb, 0); + + if (hw_wb->ops.setup_qos_lut) + hw_wb->ops.setup_qos_lut(hw_wb, &qos_cfg); +} + +/** + * dpu_encoder_phys_wb_setup_fb - setup output framebuffer + * @phys_enc: Pointer to physical encoder + * @fb: Pointer to output framebuffer + * @wb_roi: Pointer to output region of interest + */ +static void dpu_encoder_phys_wb_setup_fb(struct dpu_encoder_phys *phys_enc, + struct drm_framebuffer *fb) +{ + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc); + struct dpu_hw_wb *hw_wb; + struct dpu_hw_wb_cfg *wb_cfg; + struct dpu_hw_wb_cdp_cfg cdp_cfg; + + if (!phys_enc || !phys_enc->dpu_kms || !phys_enc->dpu_kms->catalog) { + DPU_ERROR("invalid encoder\n"); + return; + } + + hw_wb = phys_enc->hw_wb; + wb_cfg = &wb_enc->wb_cfg; + + wb_cfg->intf_mode = phys_enc->intf_mode; + wb_cfg->roi.x1 = 0; + wb_cfg->roi.x2 = phys_enc->cached_mode.hdisplay; + wb_cfg->roi.y1 = 0; + wb_cfg->roi.y2 = phys_enc->cached_mode.vdisplay; + + if (hw_wb->ops.setup_roi) + hw_wb->ops.setup_roi(hw_wb, wb_cfg); + + if (hw_wb->ops.setup_outformat) + hw_wb->ops.setup_outformat(hw_wb, wb_cfg); + + if (hw_wb->ops.setup_cdp) { + memset(&cdp_cfg, 0, sizeof(struct dpu_hw_wb_cdp_cfg)); + + cdp_cfg.enable = phys_enc->dpu_kms->catalog->perf.cdp_cfg + [DPU_PERF_CDP_USAGE_NRT].wr_enable; + cdp_cfg.ubwc_meta_enable = + DPU_FORMAT_IS_UBWC(wb_cfg->dest.format); + cdp_cfg.tile_amortize_enable = + DPU_FORMAT_IS_UBWC(wb_cfg->dest.format) || + DPU_FORMAT_IS_TILE(wb_cfg->dest.format); + cdp_cfg.preload_ahead = DPU_WB_CDP_PRELOAD_AHEAD_64; + + hw_wb->ops.setup_cdp(hw_wb, &cdp_cfg); + } + + if (hw_wb->ops.setup_outaddress) + hw_wb->ops.setup_outaddress(hw_wb, wb_cfg); +} + +/** + * dpu_encoder_phys_wb_setup_cdp - setup chroma down prefetch block + * @phys_enc:Pointer to physical encoder + */ +static void dpu_encoder_phys_wb_setup_cdp(struct dpu_encoder_phys *phys_enc) +{ + struct dpu_hw_wb *hw_wb; + struct dpu_hw_ctl *ctl; + + if (!phys_enc) { + DPU_ERROR("invalid encoder\n"); + return; + } + + hw_wb = phys_enc->hw_wb; + ctl = phys_enc->hw_ctl; + + if (test_bit(DPU_CTL_ACTIVE_CFG, &ctl->caps->features) && + (phys_enc->hw_ctl && + phys_enc->hw_ctl->ops.setup_intf_cfg)) { + struct dpu_hw_intf_cfg intf_cfg = {0}; + struct dpu_hw_pingpong *hw_pp = phys_enc->hw_pp; + enum dpu_3d_blend_mode mode_3d; + + mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc); + + intf_cfg.intf = DPU_NONE; + intf_cfg.wb = hw_wb->idx; + + if (mode_3d && hw_pp && hw_pp->merge_3d) + intf_cfg.merge_3d = hw_pp->merge_3d->idx; + + if (phys_enc->hw_pp->merge_3d && phys_enc->hw_pp->merge_3d->ops.setup_3d_mode) + phys_enc->hw_pp->merge_3d->ops.setup_3d_mode(phys_enc->hw_pp->merge_3d, + mode_3d); + + /* setup which pp blk will connect to this wb */ + if (hw_pp && phys_enc->hw_wb->ops.bind_pingpong_blk) + phys_enc->hw_wb->ops.bind_pingpong_blk(phys_enc->hw_wb, true, + phys_enc->hw_pp->idx); + + phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl, &intf_cfg); + } else if (phys_enc->hw_ctl && phys_enc->hw_ctl->ops.setup_intf_cfg) { + struct dpu_hw_intf_cfg intf_cfg = {0}; + + intf_cfg.intf = DPU_NONE; + intf_cfg.wb = hw_wb->idx; + intf_cfg.mode_3d = + dpu_encoder_helper_get_3d_blend_mode(phys_enc); + phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl, &intf_cfg); + } +} + +/** + * dpu_encoder_phys_wb_atomic_check - verify and fixup given atomic states + * @phys_enc: Pointer to physical encoder + * @crtc_state: Pointer to CRTC atomic state + * @conn_state: Pointer to connector atomic state + */ +static int dpu_encoder_phys_wb_atomic_check( + struct dpu_encoder_phys *phys_enc, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + struct drm_framebuffer *fb; + const struct drm_display_mode *mode; + + DPU_DEBUG("[atomic_check:%d, \"%s\",%d,%d]\n", + phys_enc->intf_idx, mode->name, mode->hdisplay, mode->vdisplay); + + if (!conn_state->writeback_job || !conn_state->writeback_job->fb) + return 0; + + fb = conn_state->writeback_job->fb; + mode = &crtc_state->mode; + + if (!conn_state || !conn_state->connector) { + DPU_ERROR("invalid connector state\n"); + return -EINVAL; + } else if (conn_state->connector->status != + connector_status_connected) { + DPU_ERROR("connector not connected %d\n", + conn_state->connector->status); + return -EINVAL; + } + + DPU_DEBUG("[fb_id:%u][fb:%u,%u]\n", fb->base.id, + fb->width, fb->height); + + if (fb->width != mode->hdisplay) { + DPU_ERROR("invalid fb w=%d, mode w=%d\n", fb->width, + mode->hdisplay); + return -EINVAL; + } else if (fb->height != mode->vdisplay) { + DPU_ERROR("invalid fb h=%d, mode h=%d\n", fb->height, + mode->vdisplay); + return -EINVAL; + } else if (fb->width > DEFAULT_MAX_WRITEBACK_WIDTH) { + DPU_ERROR("invalid fb w=%d, maxlinewidth=%u\n", + fb->width, DEFAULT_MAX_WRITEBACK_WIDTH); + return -EINVAL; + } + + return 0; +} + + +/** + * _dpu_encoder_phys_wb_update_flush - flush hardware update + * @phys_enc: Pointer to physical encoder + */ +static void _dpu_encoder_phys_wb_update_flush(struct dpu_encoder_phys *phys_enc) +{ + struct dpu_hw_wb *hw_wb; + struct dpu_hw_ctl *hw_ctl; + struct dpu_hw_pingpong *hw_pp; + u32 pending_flush = 0; + + if (!phys_enc) + return; + + hw_wb = phys_enc->hw_wb; + hw_pp = phys_enc->hw_pp; + hw_ctl = phys_enc->hw_ctl; + + DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); + + if (!hw_ctl) { + DPU_DEBUG("[wb:%d] no ctl assigned\n", hw_wb->idx - WB_0); + return; + } + + if (hw_ctl->ops.update_pending_flush_wb) + hw_ctl->ops.update_pending_flush_wb(hw_ctl, hw_wb->idx); + + if (hw_ctl->ops.update_pending_flush_merge_3d && hw_pp && hw_pp->merge_3d) + hw_ctl->ops.update_pending_flush_merge_3d(hw_ctl, + hw_pp->merge_3d->idx); + + if (hw_ctl->ops.get_pending_flush) + pending_flush = hw_ctl->ops.get_pending_flush(hw_ctl); + + DPU_DEBUG("Pending flush mask for CTL_%d is 0x%x, WB %d\n", + hw_ctl->idx - CTL_0, pending_flush, + hw_wb->idx - WB_0); +} + +/** + * dpu_encoder_phys_wb_setup - setup writeback encoder + * @phys_enc: Pointer to physical encoder + */ +static void dpu_encoder_phys_wb_setup( + struct dpu_encoder_phys *phys_enc) +{ + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; + struct drm_display_mode mode = phys_enc->cached_mode; + struct drm_framebuffer *fb = NULL; + + DPU_DEBUG("[mode_set:%d, \"%s\",%d,%d]\n", + hw_wb->idx - WB_0, mode.name, + mode.hdisplay, mode.vdisplay); + + dpu_encoder_phys_wb_set_ot_limit(phys_enc); + + dpu_encoder_phys_wb_set_qos_remap(phys_enc); + + dpu_encoder_phys_wb_set_qos(phys_enc); + + dpu_encoder_phys_wb_setup_fb(phys_enc, fb); + + dpu_encoder_phys_wb_setup_cdp(phys_enc); + +} + +static void _dpu_encoder_phys_wb_frame_done_helper(void *arg) +{ + struct dpu_encoder_phys *phys_enc = arg; + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc); + + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; + unsigned long lock_flags; + u32 event = DPU_ENCODER_FRAME_EVENT_DONE; + + DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); + + if (phys_enc->parent_ops->handle_frame_done) + phys_enc->parent_ops->handle_frame_done(phys_enc->parent, + phys_enc, event); + + if (phys_enc->parent_ops->handle_vblank_virt) + phys_enc->parent_ops->handle_vblank_virt(phys_enc->parent, + phys_enc); + + spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags); + atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0); + spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags); + + if (wb_enc->wb_conn) + drm_writeback_signal_completion(wb_enc->wb_conn, 0); + + /* Signal any waiting atomic commit thread */ + wake_up_all(&phys_enc->pending_kickoff_wq); +} + +/** + * dpu_encoder_phys_wb_done_irq - writeback interrupt handler + * @arg: Pointer to writeback encoder + * @irq_idx: interrupt index + */ +static void dpu_encoder_phys_wb_done_irq(void *arg, int irq_idx) +{ + _dpu_encoder_phys_wb_frame_done_helper(arg); +} + +/** + * dpu_encoder_phys_wb_irq_ctrl - irq control of WB + * @phys: Pointer to physical encoder + * @enable: indicates enable or disable interrupts + */ +static void dpu_encoder_phys_wb_irq_ctrl( + struct dpu_encoder_phys *phys, bool enable) +{ + + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys); + int ret = 0; + int refcount; + + refcount = atomic_read(&wb_enc->wbirq_refcount); + + if (enable && atomic_inc_return(&wb_enc->wbirq_refcount) == 1) { + dpu_core_irq_register_callback(phys->dpu_kms, + phys->irq[INTR_IDX_WB_DONE], dpu_encoder_phys_wb_done_irq, phys); + if (ret) + atomic_dec_return(&wb_enc->wbirq_refcount); + } else if (!enable && + atomic_dec_return(&wb_enc->wbirq_refcount) == 0) { + dpu_core_irq_unregister_callback(phys->dpu_kms, phys->irq[INTR_IDX_WB_DONE]); + if (ret) + atomic_inc_return(&wb_enc->wbirq_refcount); + } +} + +static void dpu_encoder_phys_wb_atomic_mode_set( + struct dpu_encoder_phys *phys_enc, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + + phys_enc->irq[INTR_IDX_WB_DONE] = phys_enc->hw_wb->caps->intr_wb_done; +} + +static void _dpu_encoder_phys_wb_handle_wbdone_timeout( + struct dpu_encoder_phys *phys_enc) +{ + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc); + u32 frame_event = DPU_ENCODER_FRAME_EVENT_ERROR; + + wb_enc->wb_done_timeout_cnt++; + + if (wb_enc->wb_done_timeout_cnt == 1) + msm_disp_snapshot_state(phys_enc->parent->dev); + + atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0); + + /* request a ctl reset before the next kickoff */ + phys_enc->enable_state = DPU_ENC_ERR_NEEDS_HW_RESET; + + if (wb_enc->wb_conn) + drm_writeback_signal_completion(wb_enc->wb_conn, 0); + + if (phys_enc->parent_ops->handle_frame_done) + phys_enc->parent_ops->handle_frame_done( + phys_enc->parent, phys_enc, frame_event); +} + +/** + * dpu_encoder_phys_wb_wait_for_commit_done - wait until request is committed + * @phys_enc: Pointer to physical encoder + */ +static int dpu_encoder_phys_wb_wait_for_commit_done( + struct dpu_encoder_phys *phys_enc) +{ + unsigned long ret; + struct dpu_encoder_wait_info wait_info; + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc); + + wait_info.wq = &phys_enc->pending_kickoff_wq; + wait_info.atomic_cnt = &phys_enc->pending_kickoff_cnt; + wait_info.timeout_ms = KICKOFF_TIMEOUT_MS; + + ret = dpu_encoder_helper_wait_for_irq(phys_enc, INTR_IDX_WB_DONE, + dpu_encoder_phys_wb_done_irq, &wait_info); + if (ret == -ETIMEDOUT) + _dpu_encoder_phys_wb_handle_wbdone_timeout(phys_enc); + else if (!ret) + wb_enc->wb_done_timeout_cnt = 0; + + return ret; +} + +/** + * dpu_encoder_phys_wb_prepare_for_kickoff - pre-kickoff processing + * @phys_enc: Pointer to physical encoder + * Returns: Zero on success + */ +static void dpu_encoder_phys_wb_prepare_for_kickoff( + struct dpu_encoder_phys *phys_enc) +{ + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc); + struct drm_connector *drm_conn; + struct drm_connector_state *state; + + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); + + if (!wb_enc->wb_conn || !wb_enc->wb_job) { + DPU_ERROR("invalid wb_conn or wb_job\n"); + return; + } + + drm_conn = &wb_enc->wb_conn->base; + state = drm_conn->state; + + if (wb_enc->wb_conn && wb_enc->wb_job) + drm_writeback_queue_job(wb_enc->wb_conn, state); + + dpu_encoder_phys_wb_setup(phys_enc); + + _dpu_encoder_phys_wb_update_flush(phys_enc); +} + +/** + * dpu_encoder_phys_wb_needs_single_flush - trigger flush processing + * @phys_enc: Pointer to physical encoder + */ +static bool dpu_encoder_phys_wb_needs_single_flush(struct dpu_encoder_phys *phys_enc) +{ + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); + return false; +} + +/** + * dpu_encoder_phys_wb_handle_post_kickoff - post-kickoff processing + * @phys_enc: Pointer to physical encoder + */ +static void dpu_encoder_phys_wb_handle_post_kickoff( + struct dpu_encoder_phys *phys_enc) +{ + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); + +} + +/** + * dpu_encoder_phys_wb_enable - enable writeback encoder + * @phys_enc: Pointer to physical encoder + */ +static void dpu_encoder_phys_wb_enable(struct dpu_encoder_phys *phys_enc) +{ + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); + phys_enc->enable_state = DPU_ENC_ENABLED; +} +/** + * dpu_encoder_phys_wb_disable - disable writeback encoder + * @phys_enc: Pointer to physical encoder + */ +static void dpu_encoder_phys_wb_disable(struct dpu_encoder_phys *phys_enc) +{ + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; + struct dpu_hw_ctl *hw_ctl = phys_enc->hw_ctl; + + DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0); + + if (phys_enc->enable_state == DPU_ENC_DISABLED) { + DPU_ERROR("encoder is already disabled\n"); + return; + } + + /* reset h/w before final flush */ + if (phys_enc->hw_ctl->ops.clear_pending_flush) + phys_enc->hw_ctl->ops.clear_pending_flush(phys_enc->hw_ctl); + + /* + * New CTL reset sequence from 5.0 MDP onwards. + * If has_3d_merge_reset is not set, legacy reset + * sequence is executed. + * + * Legacy reset sequence has not been implemented yet. + * Any target earlier than SM8150 will need it and when + * WB support is added to those targets will need to add + * the legacy teardown sequence as well. + */ + if (hw_ctl->caps->features & BIT(DPU_CTL_ACTIVE_CFG)) + dpu_encoder_helper_phys_cleanup(phys_enc); + + phys_enc->enable_state = DPU_ENC_DISABLED; +} + +/** + * dpu_encoder_phys_wb_destroy - destroy writeback encoder + * @phys_enc: Pointer to physical encoder + */ +static void dpu_encoder_phys_wb_destroy(struct dpu_encoder_phys *phys_enc) +{ + DPU_DEBUG("[wb:%d]\n", phys_enc->intf_idx - INTF_0); + + if (!phys_enc) + return; + + kfree(phys_enc); +} + +static void dpu_encoder_phys_wb_prepare_wb_job(struct dpu_encoder_phys *phys_enc, + struct drm_writeback_job *job) +{ + const struct msm_format *format; + struct msm_gem_address_space *aspace; + struct dpu_hw_wb_cfg *wb_cfg; + int ret; + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc); + + if (!job->fb) + return; + + wb_enc->wb_job = job; + wb_enc->wb_conn = job->connector; + aspace = phys_enc->dpu_kms->base.aspace; + + wb_cfg = &wb_enc->wb_cfg; + + memset(wb_cfg, 0, sizeof(struct dpu_hw_wb_cfg)); + + ret = msm_framebuffer_prepare(job->fb, aspace, false); + if (ret) { + DPU_ERROR("prep fb failed, %d\n", ret); + return; + } + + format = msm_framebuffer_format(job->fb); + + wb_cfg->dest.format = dpu_get_dpu_format_ext( + format->pixel_format, job->fb->modifier); + if (!wb_cfg->dest.format) { + /* this error should be detected during atomic_check */ + DPU_ERROR("failed to get format %x\n", format->pixel_format); + return; + } + + ret = dpu_format_populate_layout(aspace, job->fb, &wb_cfg->dest); + if (ret) { + DPU_DEBUG("failed to populate layout %d\n", ret); + return; + } + + wb_cfg->dest.width = job->fb->width; + wb_cfg->dest.height = job->fb->height; + wb_cfg->dest.num_planes = wb_cfg->dest.format->num_planes; + + if ((wb_cfg->dest.format->fetch_planes == DPU_PLANE_PLANAR) && + (wb_cfg->dest.format->element[0] == C1_B_Cb)) + swap(wb_cfg->dest.plane_addr[1], wb_cfg->dest.plane_addr[2]); + + DPU_DEBUG("[fb_offset:%8.8x,%8.8x,%8.8x,%8.8x]\n", + wb_cfg->dest.plane_addr[0], wb_cfg->dest.plane_addr[1], + wb_cfg->dest.plane_addr[2], wb_cfg->dest.plane_addr[3]); + + DPU_DEBUG("[fb_stride:%8.8x,%8.8x,%8.8x,%8.8x]\n", + wb_cfg->dest.plane_pitch[0], wb_cfg->dest.plane_pitch[1], + wb_cfg->dest.plane_pitch[2], wb_cfg->dest.plane_pitch[3]); +} + +static void dpu_encoder_phys_wb_cleanup_wb_job(struct dpu_encoder_phys *phys_enc, + struct drm_writeback_job *job) +{ + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc); + struct msm_gem_address_space *aspace; + + if (!job->fb) + return; + + aspace = phys_enc->dpu_kms->base.aspace; + + msm_framebuffer_cleanup(job->fb, aspace, false); + wb_enc->wb_job = NULL; + wb_enc->wb_conn = NULL; +} + +/** + * dpu_encoder_phys_wb_init_ops - initialize writeback operations + * @ops: Pointer to encoder operation table + */ +static void dpu_encoder_phys_wb_init_ops(struct dpu_encoder_phys_ops *ops) +{ + ops->is_master = dpu_encoder_phys_wb_is_master; + ops->atomic_mode_set = dpu_encoder_phys_wb_atomic_mode_set; + ops->enable = dpu_encoder_phys_wb_enable; + ops->disable = dpu_encoder_phys_wb_disable; + ops->destroy = dpu_encoder_phys_wb_destroy; + ops->atomic_check = dpu_encoder_phys_wb_atomic_check; + ops->wait_for_commit_done = dpu_encoder_phys_wb_wait_for_commit_done; + ops->prepare_for_kickoff = dpu_encoder_phys_wb_prepare_for_kickoff; + ops->handle_post_kickoff = dpu_encoder_phys_wb_handle_post_kickoff; + ops->needs_single_flush = dpu_encoder_phys_wb_needs_single_flush; + ops->trigger_start = dpu_encoder_helper_trigger_start; + ops->prepare_wb_job = dpu_encoder_phys_wb_prepare_wb_job; + ops->cleanup_wb_job = dpu_encoder_phys_wb_cleanup_wb_job; + ops->irq_control = dpu_encoder_phys_wb_irq_ctrl; +} + +/** + * dpu_encoder_phys_wb_init - initialize writeback encoder + * @init: Pointer to init info structure with initialization params + */ +struct dpu_encoder_phys *dpu_encoder_phys_wb_init( + struct dpu_enc_phys_init_params *p) +{ + struct dpu_encoder_phys *phys_enc = NULL; + struct dpu_encoder_phys_wb *wb_enc = NULL; + int ret = 0; + int i; + + DPU_DEBUG("\n"); + + if (!p || !p->parent) { + DPU_ERROR("invalid params\n"); + ret = -EINVAL; + goto fail_alloc; + } + + wb_enc = kzalloc(sizeof(*wb_enc), GFP_KERNEL); + if (!wb_enc) { + DPU_ERROR("failed to allocate wb phys_enc enc\n"); + ret = -ENOMEM; + goto fail_alloc; + } + + phys_enc = &wb_enc->base; + phys_enc->hw_mdptop = p->dpu_kms->hw_mdp; + phys_enc->intf_idx = p->intf_idx; + + dpu_encoder_phys_wb_init_ops(&phys_enc->ops); + phys_enc->parent = p->parent; + phys_enc->parent_ops = p->parent_ops; + phys_enc->dpu_kms = p->dpu_kms; + phys_enc->split_role = p->split_role; + phys_enc->intf_mode = INTF_MODE_WB_LINE; + phys_enc->intf_idx = p->intf_idx; + phys_enc->enc_spinlock = p->enc_spinlock; + + atomic_set(&wb_enc->wbirq_refcount, 0); + + for (i = 0; i < ARRAY_SIZE(phys_enc->irq); i++) + phys_enc->irq[i] = -EINVAL; + + atomic_set(&phys_enc->pending_kickoff_cnt, 0); + atomic_set(&phys_enc->vblank_refcount, 0); + wb_enc->wb_done_timeout_cnt = 0; + + init_waitqueue_head(&phys_enc->pending_kickoff_wq); + phys_enc->enable_state = DPU_ENC_DISABLED; + + DPU_DEBUG("Created dpu_encoder_phys for wb %d\n", + phys_enc->intf_idx); + + return phys_enc; + +fail_alloc: + return ERR_PTR(ret); +}
Introduce the dpu_encoder_phys_* for the writeback interface to handle writeback specific hardware programming. changes in v2: - rebase on msm-next and fix related dependencies namely the irq cleanup - move cdp_cfg, aspace out of dpu_encoder_phys_wb - leave a comment about wb master - start using _dpu_hw_get_qos_lut from dpu_hw_util - replace hw_pp->merge_3d check with DPU_CTL_ACTIVE_CFG Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> --- drivers/gpu/drm/msm/Makefile | 1 + drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 30 + .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 751 +++++++++++++++++++++ 3 files changed, 782 insertions(+) create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c