| Message ID | 1650636521-18442-1-git-send-email-quic_srivasam@quicinc.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add soundcard support for sc7280 based platforms. | expand |
On Fri, Apr 22, 2022 at 07:38:29PM +0530, Srinivasa Rao Mandadapu wrote: > This patch set is to add bolero digital macros, WCD and maxim codecs nodes > for audio on sc7280 based platforms. > > This patch set depends on: > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=631506 There's a newer version (v10) [1] which should be ready to land now that 'Add pin control support for lpass sc7280' [2] has landed in Linus' pinctrl tree > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=601249 These are flagged as 'Queued', so probably landing soon. > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=634203 There is a newer version [3] which seems ready to land. > -- Clock reset control patches What is this? I don't think I have seen an upstream version of this. Please provide a link, or if it hasn't be posted upstream yet make sure it is done ASAP. [1]https://patchwork.kernel.org/project/linux-arm-msm/list/?series=632316 [2] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=633019&state=* [3] https://patchwork.kernel.org/project/linux-arm-msm/patch/1650621734-10297-1-git-send-email-quic_srivasam@quicinc.com/
On 4/26/2022 12:00 AM, Matthias Kaehlcke wrote: > On Fri, Apr 22, 2022 at 07:38:29PM +0530, Srinivasa Rao Mandadapu wrote: >> This patch set is to add bolero digital macros, WCD and maxim codecs nodes >> for audio on sc7280 based platforms. >> >> This patch set depends on: >> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=631506 > There's a newer version (v10) [1] > > which should be ready to land now that 'Add pin control support for lpass > sc7280' [2] has landed in Linus' pinctrl tree Yes. It's ready for landing. But will post the next version, as per new herobrine dts files for rev5+ boards. > >> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=601249 > These are flagged as 'Queued', so probably landing soon. Yes. They may land soon. > >> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=634203 > There is a newer version [3] which seems ready to land. Yes. It's reviewed. > >> -- Clock reset control patches > What is this? I don't think I have seen an upstream version of this. > Please provide a link, or if it hasn't be posted upstream yet make sure > it is done ASAP. These patches are yet to upstream by Clock team. Requested them to do ASAP. > > [1]https://patchwork.kernel.org/project/linux-arm-msm/list/?series=632316 > [2] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=633019&state=* > [3] https://patchwork.kernel.org/project/linux-arm-msm/patch/1650621734-10297-1-git-send-email-quic_srivasam@quicinc.com/
This patch set is to add bolero digital macros, WCD and maxim codecs nodes for audio on sc7280 based platforms. This patch set depends on: -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=631506 -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=601249 -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=634203 -- Clock reset control patches Changes Since V9: -- Move wcd codec and digital codec nodes to sc7280-qcard file. -- Modify the reg property as per link number in sound node. -- Fix the us-euro pin control usage in wcd codec node. -- Move wcd pin control nodes to specific crd board files. -- Sort max98360a codec node in alphabetical order. -- Modify the commit messages. Changes Since V8: -- Split patches as per sc7280 CRD revision 3, 4 and 5 boards. -- Add corresponding dt nodes for herobrine crd boards. -- Update dai-link node names as per dt-bindings in sound node. -- Add reg property in sound node as per dt-bindings which was removed in previous series. -- Fix typo errors. -- Update wcd codec pin control properties in board specific files. Changes Since V7: -- Remove redundant interrupt names in soundwire node. -- Fix typo errors. -- Remove redundant reg property in sound node. -- Rebased on top of latest kernel tip. Changes Since V6: -- Modify link-names and audio routing in a sound node. -- Move amp_en pin control node to appropriate consumer patch. -- Split patches as per digital macro codecs and board specific codecs and sort it. -- Modify label and node names to lpass specific. Changes Since V5: -- Move soc specific bolero digital codec nodes to soc specific file. -- Bring wcd938x codec reset pin control and US/EURO HS selection nodes from other series. -- Change node name and remove redundant status property in sound node. Changes Since V4: -- Update nodes in sorting order. -- Update DTS node names as per dt-bindings. -- Update Node properties in proper order. -- Update missing pinctrl properties like US/EURO HS selection, wcd reset control. -- Remove redundant labels. -- Remove unused size cells and address cells in tx macro node. -- Keep all same nodes at one place, which are defined in same file. -- Add max98360a codec node to herobrine board specific targets. Changes Since V3: -- Move digital codec macro nodes to board specific dtsi file. -- Update pin controls in lpass cpu node. -- Update dependency patch list. -- Create patches on latest kernel. Changes Since V2: -- Add power domains to digital codec macro nodes. -- Change clock node usage in lpass cpu node. -- Add codec mem clock to lpass cpu node. -- Modify the node names to be generic. -- Move sound and codec nodes to root node. -- sort dai links as per reg. -- Fix typo errors. Changes Since V1: -- Update the commit message of cpu node patch. -- Add gpio control property to support Euro headset in wcd938x node. -- Fix clock properties in lpass cpu and digital codec macro node. Srinivasa Rao Mandadapu (12): arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0/2.0 and IDP boards arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1 arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and IDP boards arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP boards arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node arm64: dts: qcom: sc7280: Add lpass cpu node arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and IDP boards. arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP boards arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1 arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 37 ++++ arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 150 +++++++++++++++ arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 + arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 218 ++++++++++++++++++++++ arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 75 ++++++++ arch/arm64/boot/dts/qcom/sc7280.dtsi | 190 +++++++++++++++++++ 6 files changed, 678 insertions(+)