| Message ID | 20220426101241.30100-2-nj.shetty@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add Copy offload support | expand |
On 4/26/22 19:12, Nitesh Shetty wrote: > Add device limits as sysfs entries, > - copy_offload (RW) > - copy_max_bytes (RW) > - copy_max_hw_bytes (RO) > - copy_max_range_bytes (RW) > - copy_max_range_hw_bytes (RO) > - copy_max_nr_ranges (RW) > - copy_max_nr_ranges_hw (RO) > > Above limits help to split the copy payload in block layer. > copy_offload, used for setting copy offload(1) or emulation(0). > copy_max_bytes: maximum total length of copy in single payload. > copy_max_range_bytes: maximum length in a single entry. > copy_max_nr_ranges: maximum number of entries in a payload. > copy_max_*_hw_*: Reflects the device supported maximum limits. > > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> > Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> > Signed-off-by: Arnav Dawn <arnav.dawn@samsung.com> > --- > Documentation/ABI/stable/sysfs-block | 83 ++++++++++++++++ > block/blk-settings.c | 59 ++++++++++++ > block/blk-sysfs.c | 138 +++++++++++++++++++++++++++ > include/linux/blkdev.h | 13 +++ > 4 files changed, 293 insertions(+) > > diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block > index e8797cd09aff..65e64b5a0105 100644 > --- a/Documentation/ABI/stable/sysfs-block > +++ b/Documentation/ABI/stable/sysfs-block > @@ -155,6 +155,89 @@ Description: > last zone of the device which may be smaller. > > > +What: /sys/block/<disk>/queue/copy_offload > +Date: April 2022 > +Contact: linux-block@vger.kernel.org > +Description: > + [RW] When read, this file shows whether offloading copy to > + device is enabled (1) or disabled (0). Writing '0' to this > + file will disable offloading copies for this device. > + Writing any '1' value will enable this feature. > + > + > +What: /sys/block/<disk>/queue/copy_max_bytes > +Date: April 2022 > +Contact: linux-block@vger.kernel.org > +Description: > + [RW] While 'copy_max_hw_bytes' is the hardware limit for the > + device, 'copy_max_bytes' setting is the software limit. > + Setting this value lower will make Linux issue smaller size > + copies. > + > + > +What: /sys/block/<disk>/queue/copy_max_hw_bytes > +Date: April 2022 > +Contact: linux-block@vger.kernel.org > +Description: > + [RO] Devices that support offloading copy functionality may have > + internal limits on the number of bytes that can be offloaded > + in a single operation. The `copy_max_hw_bytes` > + parameter is set by the device driver to the maximum number of > + bytes that can be copied in a single operation. Copy > + requests issued to the device must not exceed this limit. > + A value of 0 means that the device does not > + support copy offload. > + > + > +What: /sys/block/<disk>/queue/copy_max_nr_ranges > +Date: April 2022 > +Contact: linux-block@vger.kernel.org > +Description: > + [RW] While 'copy_max_nr_ranges_hw' is the hardware limit for the > + device, 'copy_max_nr_ranges' setting is the software limit. > + > + > +What: /sys/block/<disk>/queue/copy_max_nr_ranges_hw > +Date: April 2022 > +Contact: linux-block@vger.kernel.org > +Description: > + [RO] Devices that support offloading copy functionality may have > + internal limits on the number of ranges in single copy operation > + that can be offloaded in a single operation. > + A range is tuple of source, destination and length of data > + to be copied. The `copy_max_nr_ranges_hw` parameter is set by > + the device driver to the maximum number of ranges that can be > + copied in a single operation. Copy requests issued to the device > + must not exceed this limit. A value of 0 means that the device > + does not support copy offload. > + > + > +What: /sys/block/<disk>/queue/copy_max_range_bytes > +Date: April 2022 > +Contact: linux-block@vger.kernel.org > +Description: > + [RW] While 'copy_max_range_hw_bytes' is the hardware limit for > + the device, 'copy_max_range_bytes' setting is the software > + limit. > + > + > +What: /sys/block/<disk>/queue/copy_max_range_hw_bytes > +Date: April 2022 > +Contact: linux-block@vger.kernel.org > +Description: > + [RO] Devices that support offloading copy functionality may have > + internal limits on the size of data, that can be copied in a > + single range within a single copy operation. > + A range is tuple of source, destination and length of data to be > + copied. The `copy_max_range_hw_bytes` parameter is set by the > + device driver to set the maximum length in bytes of a range > + that can be copied in an operation. > + Copy requests issued to the device must not exceed this limit. > + Sum of sizes of all ranges in a single opeartion should not > + exceed 'copy_max_hw_bytes'. A value of 0 means that the device > + does not support copy offload. > + > + > What: /sys/block/<disk>/queue/crypto/ > Date: February 2022 > Contact: linux-block@vger.kernel.org > diff --git a/block/blk-settings.c b/block/blk-settings.c > index 6ccceb421ed2..70167aee3bf7 100644 > --- a/block/blk-settings.c > +++ b/block/blk-settings.c > @@ -57,6 +57,12 @@ void blk_set_default_limits(struct queue_limits *lim) > lim->misaligned = 0; > lim->zoned = BLK_ZONED_NONE; > lim->zone_write_granularity = 0; > + lim->max_hw_copy_sectors = 0; For readability, I would keep "hw" next to sectors/nr_ranges: max_copy_hw_sectors max_copy_sectors max_copy_hw_nr_ranges max_copy_nr_ranges max_copy_range_hw_sectors max_copy_range_sectors > + lim->max_copy_sectors = 0; > + lim->max_hw_copy_nr_ranges = 0; > + lim->max_copy_nr_ranges = 0; > + lim->max_hw_copy_range_sectors = 0; > + lim->max_copy_range_sectors = 0; > } > EXPORT_SYMBOL(blk_set_default_limits); > > @@ -81,6 +87,12 @@ void blk_set_stacking_limits(struct queue_limits *lim) > lim->max_dev_sectors = UINT_MAX; > lim->max_write_zeroes_sectors = UINT_MAX; > lim->max_zone_append_sectors = UINT_MAX; > + lim->max_hw_copy_sectors = ULONG_MAX; > + lim->max_copy_sectors = ULONG_MAX; > + lim->max_hw_copy_range_sectors = UINT_MAX; > + lim->max_copy_range_sectors = UINT_MAX; > + lim->max_hw_copy_nr_ranges = USHRT_MAX; > + lim->max_copy_nr_ranges = USHRT_MAX; > } > EXPORT_SYMBOL(blk_set_stacking_limits); > > @@ -177,6 +189,45 @@ void blk_queue_max_discard_sectors(struct request_queue *q, > } > EXPORT_SYMBOL(blk_queue_max_discard_sectors); > > +/** > + * blk_queue_max_copy_sectors - set max sectors for a single copy payload > + * @q: the request queue for the device > + * @max_copy_sectors: maximum number of sectors to copy > + **/ > +void blk_queue_max_copy_sectors(struct request_queue *q, This should be blk_queue_max_copy_hw_sectors(). > + unsigned int max_copy_sectors) > +{ > + q->limits.max_hw_copy_sectors = max_copy_sectors; > + q->limits.max_copy_sectors = max_copy_sectors; > +} > +EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors); > + > +/** > + * blk_queue_max_copy_range_sectors - set max sectors for a single range, in a copy payload > + * @q: the request queue for the device > + * @max_copy_range_sectors: maximum number of sectors to copy in a single range > + **/ > +void blk_queue_max_copy_range_sectors(struct request_queue *q, And this should be blk_queue_max_copy_range_hw_sectors(). Etc for the other ones below. > + unsigned int max_copy_range_sectors) > +{ > + q->limits.max_hw_copy_range_sectors = max_copy_range_sectors; > + q->limits.max_copy_range_sectors = max_copy_range_sectors; > +} > +EXPORT_SYMBOL_GPL(blk_queue_max_copy_range_sectors); > + > +/** > + * blk_queue_max_copy_nr_ranges - set max number of ranges, in a copy payload > + * @q: the request queue for the device > + * @max_copy_nr_ranges: maximum number of ranges > + **/ > +void blk_queue_max_copy_nr_ranges(struct request_queue *q, > + unsigned int max_copy_nr_ranges) > +{ > + q->limits.max_hw_copy_nr_ranges = max_copy_nr_ranges; > + q->limits.max_copy_nr_ranges = max_copy_nr_ranges; > +} > +EXPORT_SYMBOL_GPL(blk_queue_max_copy_nr_ranges); > + > /** > * blk_queue_max_secure_erase_sectors - set max sectors for a secure erase > * @q: the request queue for the device > @@ -572,6 +623,14 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, > t->max_segment_size = min_not_zero(t->max_segment_size, > b->max_segment_size); > > + t->max_copy_sectors = min(t->max_copy_sectors, b->max_copy_sectors); > + t->max_hw_copy_sectors = min(t->max_hw_copy_sectors, b->max_hw_copy_sectors); > + t->max_copy_range_sectors = min(t->max_copy_range_sectors, b->max_copy_range_sectors); > + t->max_hw_copy_range_sectors = min(t->max_hw_copy_range_sectors, > + b->max_hw_copy_range_sectors); > + t->max_copy_nr_ranges = min(t->max_copy_nr_ranges, b->max_copy_nr_ranges); > + t->max_hw_copy_nr_ranges = min(t->max_hw_copy_nr_ranges, b->max_hw_copy_nr_ranges); > + > t->misaligned |= b->misaligned; > > alignment = queue_limit_alignment_offset(b, start); > diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c > index 88bd41d4cb59..bae987c10f7f 100644 > --- a/block/blk-sysfs.c > +++ b/block/blk-sysfs.c > @@ -212,6 +212,129 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag > return queue_var_show(0, page); > } > > +static ssize_t queue_copy_offload_show(struct request_queue *q, char *page) > +{ > + return queue_var_show(blk_queue_copy(q), page); > +} > + > +static ssize_t queue_copy_offload_store(struct request_queue *q, > + const char *page, size_t count) > +{ > + unsigned long copy_offload; > + ssize_t ret = queue_var_store(©_offload, page, count); > + > + if (ret < 0) > + return ret; > + > + if (copy_offload && !q->limits.max_hw_copy_sectors) > + return -EINVAL; > + > + if (copy_offload) > + blk_queue_flag_set(QUEUE_FLAG_COPY, q); > + else > + blk_queue_flag_clear(QUEUE_FLAG_COPY, q); > + > + return ret; > +} > + > +static ssize_t queue_copy_max_hw_show(struct request_queue *q, char *page) > +{ > + return sprintf(page, "%llu\n", > + (unsigned long long)q->limits.max_hw_copy_sectors << 9); > +} > + > +static ssize_t queue_copy_max_show(struct request_queue *q, char *page> +{ > + return sprintf(page, "%llu\n", > + (unsigned long long)q->limits.max_copy_sectors << 9); > +} > + > +static ssize_t queue_copy_max_store(struct request_queue *q, > + const char *page, size_t count) > +{ > + unsigned long max_copy; > + ssize_t ret = queue_var_store(&max_copy, page, count); > + > + if (ret < 0) > + return ret; > + > + if (max_copy & (queue_logical_block_size(q) - 1)) > + return -EINVAL; > + > + max_copy >>= 9; > + if (max_copy > q->limits.max_hw_copy_sectors) > + max_copy = q->limits.max_hw_copy_sectors; > + > + q->limits.max_copy_sectors = max_copy; > + return ret; > +} > + > +static ssize_t queue_copy_range_max_hw_show(struct request_queue *q, char *page) > +{ > + return sprintf(page, "%llu\n", > + (unsigned long long)q->limits.max_hw_copy_range_sectors << 9); > +} > + > +static ssize_t queue_copy_range_max_show(struct request_queue *q, > + char *page) > +{ > + return sprintf(page, "%llu\n", > + (unsigned long long)q->limits.max_copy_range_sectors << 9); > +} > + > +static ssize_t queue_copy_range_max_store(struct request_queue *q, > + const char *page, size_t count) > +{ > + unsigned long max_copy; > + ssize_t ret = queue_var_store(&max_copy, page, count); > + > + if (ret < 0) > + return ret; > + > + if (max_copy & (queue_logical_block_size(q) - 1)) > + return -EINVAL; > + > + max_copy >>= 9; > + if (max_copy > UINT_MAX) On 32-bits arch, unsigned long and unsigned int are the same so this test is useless for these arch. Better have max_copy declared as unsigned long long. > + return -EINVAL; > + > + if (max_copy > q->limits.max_hw_copy_range_sectors) > + max_copy = q->limits.max_hw_copy_range_sectors; > + > + q->limits.max_copy_range_sectors = max_copy; > + return ret; > +} > + > +static ssize_t queue_copy_nr_ranges_max_hw_show(struct request_queue *q, char *page) > +{ > + return queue_var_show(q->limits.max_hw_copy_nr_ranges, page); > +} > + > +static ssize_t queue_copy_nr_ranges_max_show(struct request_queue *q, > + char *page) > +{ > + return queue_var_show(q->limits.max_copy_nr_ranges, page); > +} > + > +static ssize_t queue_copy_nr_ranges_max_store(struct request_queue *q, > + const char *page, size_t count) > +{ > + unsigned long max_nr; > + ssize_t ret = queue_var_store(&max_nr, page, count); > + > + if (ret < 0) > + return ret; > + > + if (max_nr > USHRT_MAX) > + return -EINVAL; > + > + if (max_nr > q->limits.max_hw_copy_nr_ranges) > + max_nr = q->limits.max_hw_copy_nr_ranges; > + > + q->limits.max_copy_nr_ranges = max_nr; > + return ret; > +} > + > static ssize_t queue_write_same_max_show(struct request_queue *q, char *page) > { > return queue_var_show(0, page); > @@ -596,6 +719,14 @@ QUEUE_RO_ENTRY(queue_nr_zones, "nr_zones"); > QUEUE_RO_ENTRY(queue_max_open_zones, "max_open_zones"); > QUEUE_RO_ENTRY(queue_max_active_zones, "max_active_zones"); > > +QUEUE_RW_ENTRY(queue_copy_offload, "copy_offload"); > +QUEUE_RO_ENTRY(queue_copy_max_hw, "copy_max_hw_bytes"); > +QUEUE_RW_ENTRY(queue_copy_max, "copy_max_bytes"); > +QUEUE_RO_ENTRY(queue_copy_range_max_hw, "copy_max_range_hw_bytes"); > +QUEUE_RW_ENTRY(queue_copy_range_max, "copy_max_range_bytes"); > +QUEUE_RO_ENTRY(queue_copy_nr_ranges_max_hw, "copy_max_nr_ranges_hw"); > +QUEUE_RW_ENTRY(queue_copy_nr_ranges_max, "copy_max_nr_ranges"); > + > QUEUE_RW_ENTRY(queue_nomerges, "nomerges"); > QUEUE_RW_ENTRY(queue_rq_affinity, "rq_affinity"); > QUEUE_RW_ENTRY(queue_poll, "io_poll"); > @@ -642,6 +773,13 @@ static struct attribute *queue_attrs[] = { > &queue_discard_max_entry.attr, > &queue_discard_max_hw_entry.attr, > &queue_discard_zeroes_data_entry.attr, > + &queue_copy_offload_entry.attr, > + &queue_copy_max_hw_entry.attr, > + &queue_copy_max_entry.attr, > + &queue_copy_range_max_hw_entry.attr, > + &queue_copy_range_max_entry.attr, > + &queue_copy_nr_ranges_max_hw_entry.attr, > + &queue_copy_nr_ranges_max_entry.attr, > &queue_write_same_max_entry.attr, > &queue_write_zeroes_max_entry.attr, > &queue_zone_append_max_entry.attr, > diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h > index 1b24c1fb3bb1..3596fd37fae7 100644 > --- a/include/linux/blkdev.h > +++ b/include/linux/blkdev.h > @@ -270,6 +270,13 @@ struct queue_limits { > unsigned int discard_alignment; > unsigned int zone_write_granularity; > > + unsigned long max_hw_copy_sectors; > + unsigned long max_copy_sectors; > + unsigned int max_hw_copy_range_sectors; > + unsigned int max_copy_range_sectors; > + unsigned short max_hw_copy_nr_ranges; > + unsigned short max_copy_nr_ranges; > + > unsigned short max_segments; > unsigned short max_integrity_segments; > unsigned short max_discard_segments; > @@ -574,6 +581,7 @@ struct request_queue { > #define QUEUE_FLAG_RQ_ALLOC_TIME 27 /* record rq->alloc_time_ns */ > #define QUEUE_FLAG_HCTX_ACTIVE 28 /* at least one blk-mq hctx is active */ > #define QUEUE_FLAG_NOWAIT 29 /* device supports NOWAIT */ > +#define QUEUE_FLAG_COPY 30 /* supports copy offload */ > > #define QUEUE_FLAG_MQ_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \ > (1 << QUEUE_FLAG_SAME_COMP) | \ > @@ -596,6 +604,7 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q); > test_bit(QUEUE_FLAG_STABLE_WRITES, &(q)->queue_flags) > #define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags) > #define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags) > +#define blk_queue_copy(q) test_bit(QUEUE_FLAG_COPY, &(q)->queue_flags) > #define blk_queue_zone_resetall(q) \ > test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags) > #define blk_queue_dax(q) test_bit(QUEUE_FLAG_DAX, &(q)->queue_flags) > @@ -960,6 +969,10 @@ extern void blk_queue_chunk_sectors(struct request_queue *, unsigned int); > extern void blk_queue_max_segments(struct request_queue *, unsigned short); > extern void blk_queue_max_discard_segments(struct request_queue *, > unsigned short); > +extern void blk_queue_max_copy_sectors(struct request_queue *q, unsigned int max_copy_sectors); > +extern void blk_queue_max_copy_range_sectors(struct request_queue *q, > + unsigned int max_copy_range_sectors); > +extern void blk_queue_max_copy_nr_ranges(struct request_queue *q, unsigned int max_copy_nr_ranges); > void blk_queue_max_secure_erase_sectors(struct request_queue *q, > unsigned int max_sectors); > extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
On 4/26/22 12:12, Nitesh Shetty wrote: > Add device limits as sysfs entries, > - copy_offload (RW) > - copy_max_bytes (RW) > - copy_max_hw_bytes (RO) > - copy_max_range_bytes (RW) > - copy_max_range_hw_bytes (RO) > - copy_max_nr_ranges (RW) > - copy_max_nr_ranges_hw (RO) > > Above limits help to split the copy payload in block layer. > copy_offload, used for setting copy offload(1) or emulation(0). > copy_max_bytes: maximum total length of copy in single payload. > copy_max_range_bytes: maximum length in a single entry. > copy_max_nr_ranges: maximum number of entries in a payload. > copy_max_*_hw_*: Reflects the device supported maximum limits. > > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> > Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> > Signed-off-by: Arnav Dawn <arnav.dawn@samsung.com> > --- > Documentation/ABI/stable/sysfs-block | 83 ++++++++++++++++ > block/blk-settings.c | 59 ++++++++++++ > block/blk-sysfs.c | 138 +++++++++++++++++++++++++++ > include/linux/blkdev.h | 13 +++ > 4 files changed, 293 insertions(+) > Reviewed-by: Hannes Reinecke <hare@suse.de> Cheers, Hannes
On Wed, Apr 27, 2022 at 10:59:01AM +0900, Damien Le Moal wrote: > On 4/26/22 19:12, Nitesh Shetty wrote: > > Add device limits as sysfs entries, > > - copy_offload (RW) > > - copy_max_bytes (RW) > > - copy_max_hw_bytes (RO) > > - copy_max_range_bytes (RW) > > - copy_max_range_hw_bytes (RO) > > - copy_max_nr_ranges (RW) > > - copy_max_nr_ranges_hw (RO) > > > > Above limits help to split the copy payload in block layer. > > copy_offload, used for setting copy offload(1) or emulation(0). > > copy_max_bytes: maximum total length of copy in single payload. > > copy_max_range_bytes: maximum length in a single entry. > > copy_max_nr_ranges: maximum number of entries in a payload. > > copy_max_*_hw_*: Reflects the device supported maximum limits. > > > > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> > > Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> > > Signed-off-by: Arnav Dawn <arnav.dawn@samsung.com> > > --- > > Documentation/ABI/stable/sysfs-block | 83 ++++++++++++++++ > > block/blk-settings.c | 59 ++++++++++++ > > block/blk-sysfs.c | 138 +++++++++++++++++++++++++++ > > include/linux/blkdev.h | 13 +++ > > 4 files changed, 293 insertions(+) > > > > diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block > > index e8797cd09aff..65e64b5a0105 100644 > > --- a/Documentation/ABI/stable/sysfs-block > > +++ b/Documentation/ABI/stable/sysfs-block > > @@ -155,6 +155,89 @@ Description: > > last zone of the device which may be smaller. > > > > > > +What: /sys/block/<disk>/queue/copy_offload > > +Date: April 2022 > > +Contact: linux-block@vger.kernel.org > > +Description: > > + [RW] When read, this file shows whether offloading copy to > > + device is enabled (1) or disabled (0). Writing '0' to this > > + file will disable offloading copies for this device. > > + Writing any '1' value will enable this feature. > > + > > + > > +What: /sys/block/<disk>/queue/copy_max_bytes > > +Date: April 2022 > > +Contact: linux-block@vger.kernel.org > > +Description: > > + [RW] While 'copy_max_hw_bytes' is the hardware limit for the > > + device, 'copy_max_bytes' setting is the software limit. > > + Setting this value lower will make Linux issue smaller size > > + copies. > > + > > + > > +What: /sys/block/<disk>/queue/copy_max_hw_bytes > > +Date: April 2022 > > +Contact: linux-block@vger.kernel.org > > +Description: > > + [RO] Devices that support offloading copy functionality may have > > + internal limits on the number of bytes that can be offloaded > > + in a single operation. The `copy_max_hw_bytes` > > + parameter is set by the device driver to the maximum number of > > + bytes that can be copied in a single operation. Copy > > + requests issued to the device must not exceed this limit. > > + A value of 0 means that the device does not > > + support copy offload. > > + > > + > > +What: /sys/block/<disk>/queue/copy_max_nr_ranges > > +Date: April 2022 > > +Contact: linux-block@vger.kernel.org > > +Description: > > + [RW] While 'copy_max_nr_ranges_hw' is the hardware limit for the > > + device, 'copy_max_nr_ranges' setting is the software limit. > > + > > + > > +What: /sys/block/<disk>/queue/copy_max_nr_ranges_hw > > +Date: April 2022 > > +Contact: linux-block@vger.kernel.org > > +Description: > > + [RO] Devices that support offloading copy functionality may have > > + internal limits on the number of ranges in single copy operation > > + that can be offloaded in a single operation. > > + A range is tuple of source, destination and length of data > > + to be copied. The `copy_max_nr_ranges_hw` parameter is set by > > + the device driver to the maximum number of ranges that can be > > + copied in a single operation. Copy requests issued to the device > > + must not exceed this limit. A value of 0 means that the device > > + does not support copy offload. > > + > > + > > +What: /sys/block/<disk>/queue/copy_max_range_bytes > > +Date: April 2022 > > +Contact: linux-block@vger.kernel.org > > +Description: > > + [RW] While 'copy_max_range_hw_bytes' is the hardware limit for > > + the device, 'copy_max_range_bytes' setting is the software > > + limit. > > + > > + > > +What: /sys/block/<disk>/queue/copy_max_range_hw_bytes > > +Date: April 2022 > > +Contact: linux-block@vger.kernel.org > > +Description: > > + [RO] Devices that support offloading copy functionality may have > > + internal limits on the size of data, that can be copied in a > > + single range within a single copy operation. > > + A range is tuple of source, destination and length of data to be > > + copied. The `copy_max_range_hw_bytes` parameter is set by the > > + device driver to set the maximum length in bytes of a range > > + that can be copied in an operation. > > + Copy requests issued to the device must not exceed this limit. > > + Sum of sizes of all ranges in a single opeartion should not > > + exceed 'copy_max_hw_bytes'. A value of 0 means that the device > > + does not support copy offload. > > + > > + > > What: /sys/block/<disk>/queue/crypto/ > > Date: February 2022 > > Contact: linux-block@vger.kernel.org > > diff --git a/block/blk-settings.c b/block/blk-settings.c > > index 6ccceb421ed2..70167aee3bf7 100644 > > --- a/block/blk-settings.c > > +++ b/block/blk-settings.c > > @@ -57,6 +57,12 @@ void blk_set_default_limits(struct queue_limits *lim) > > lim->misaligned = 0; > > lim->zoned = BLK_ZONED_NONE; > > lim->zone_write_granularity = 0; > > + lim->max_hw_copy_sectors = 0; > > For readability, I would keep "hw" next to sectors/nr_ranges: > > max_copy_hw_sectors > max_copy_sectors > max_copy_hw_nr_ranges > max_copy_nr_ranges > max_copy_range_hw_sectors > max_copy_range_sectors > acked > > + lim->max_copy_sectors = 0; > > + lim->max_hw_copy_nr_ranges = 0; > > + lim->max_copy_nr_ranges = 0; > > + lim->max_hw_copy_range_sectors = 0; > > + lim->max_copy_range_sectors = 0; > > } > > EXPORT_SYMBOL(blk_set_default_limits); > > > > @@ -81,6 +87,12 @@ void blk_set_stacking_limits(struct queue_limits *lim) > > lim->max_dev_sectors = UINT_MAX; > > lim->max_write_zeroes_sectors = UINT_MAX; > > lim->max_zone_append_sectors = UINT_MAX; > > + lim->max_hw_copy_sectors = ULONG_MAX; > > + lim->max_copy_sectors = ULONG_MAX; > > + lim->max_hw_copy_range_sectors = UINT_MAX; > > + lim->max_copy_range_sectors = UINT_MAX; > > + lim->max_hw_copy_nr_ranges = USHRT_MAX; > > + lim->max_copy_nr_ranges = USHRT_MAX; > > } > > EXPORT_SYMBOL(blk_set_stacking_limits); > > > > @@ -177,6 +189,45 @@ void blk_queue_max_discard_sectors(struct request_queue *q, > > } > > EXPORT_SYMBOL(blk_queue_max_discard_sectors); > > > > +/** > > + * blk_queue_max_copy_sectors - set max sectors for a single copy payload > > + * @q: the request queue for the device > > + * @max_copy_sectors: maximum number of sectors to copy > > + **/ > > +void blk_queue_max_copy_sectors(struct request_queue *q, > > This should be blk_queue_max_copy_hw_sectors(). > acked. Reasoning being, this function is used only by driver once for setting hw limits ? > > + unsigned int max_copy_sectors) > > +{ > > + q->limits.max_hw_copy_sectors = max_copy_sectors; > > + q->limits.max_copy_sectors = max_copy_sectors; > > +} > > +EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors); > > + > > +/** > > + * blk_queue_max_copy_range_sectors - set max sectors for a single range, in a copy payload > > + * @q: the request queue for the device > > + * @max_copy_range_sectors: maximum number of sectors to copy in a single range > > + **/ > > +void blk_queue_max_copy_range_sectors(struct request_queue *q, > > And this should be blk_queue_max_copy_range_hw_sectors(). Etc for the > other ones below. > acked > > + unsigned int max_copy_range_sectors) > > +{ > > + q->limits.max_hw_copy_range_sectors = max_copy_range_sectors; > > + q->limits.max_copy_range_sectors = max_copy_range_sectors; > > +} > > +EXPORT_SYMBOL_GPL(blk_queue_max_copy_range_sectors); > > + > > +/** > > + * blk_queue_max_copy_nr_ranges - set max number of ranges, in a copy payload > > + * @q: the request queue for the device > > + * @max_copy_nr_ranges: maximum number of ranges > > + **/ > > +void blk_queue_max_copy_nr_ranges(struct request_queue *q, > > + unsigned int max_copy_nr_ranges) > > +{ > > + q->limits.max_hw_copy_nr_ranges = max_copy_nr_ranges; > > + q->limits.max_copy_nr_ranges = max_copy_nr_ranges; > > +} > > +EXPORT_SYMBOL_GPL(blk_queue_max_copy_nr_ranges); > > + > > /** > > * blk_queue_max_secure_erase_sectors - set max sectors for a secure erase > > * @q: the request queue for the device > > @@ -572,6 +623,14 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, > > t->max_segment_size = min_not_zero(t->max_segment_size, > > b->max_segment_size); > > > > + t->max_copy_sectors = min(t->max_copy_sectors, b->max_copy_sectors); > > + t->max_hw_copy_sectors = min(t->max_hw_copy_sectors, b->max_hw_copy_sectors); > > + t->max_copy_range_sectors = min(t->max_copy_range_sectors, b->max_copy_range_sectors); > > + t->max_hw_copy_range_sectors = min(t->max_hw_copy_range_sectors, > > + b->max_hw_copy_range_sectors); > > + t->max_copy_nr_ranges = min(t->max_copy_nr_ranges, b->max_copy_nr_ranges); > > + t->max_hw_copy_nr_ranges = min(t->max_hw_copy_nr_ranges, b->max_hw_copy_nr_ranges); > > + > > t->misaligned |= b->misaligned; > > > > alignment = queue_limit_alignment_offset(b, start); > > diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c > > index 88bd41d4cb59..bae987c10f7f 100644 > > --- a/block/blk-sysfs.c > > +++ b/block/blk-sysfs.c > > @@ -212,6 +212,129 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag > > return queue_var_show(0, page); > > } > > > > +static ssize_t queue_copy_offload_show(struct request_queue *q, char *page) > > +{ > > + return queue_var_show(blk_queue_copy(q), page); > > +} > > + > > +static ssize_t queue_copy_offload_store(struct request_queue *q, > > + const char *page, size_t count) > > +{ > > + unsigned long copy_offload; > > + ssize_t ret = queue_var_store(©_offload, page, count); > > + > > + if (ret < 0) > > + return ret; > > + > > + if (copy_offload && !q->limits.max_hw_copy_sectors) > > + return -EINVAL; > > + > > + if (copy_offload) > > + blk_queue_flag_set(QUEUE_FLAG_COPY, q); > > + else > > + blk_queue_flag_clear(QUEUE_FLAG_COPY, q); > > + > > + return ret; > > +} > > + > > +static ssize_t queue_copy_max_hw_show(struct request_queue *q, char *page) > > +{ > > + return sprintf(page, "%llu\n", > > + (unsigned long long)q->limits.max_hw_copy_sectors << 9); > > +} > > + > > +static ssize_t queue_copy_max_show(struct request_queue *q, char *page> +{ > > + return sprintf(page, "%llu\n", > > + (unsigned long long)q->limits.max_copy_sectors << 9); > > +} > > + > > +static ssize_t queue_copy_max_store(struct request_queue *q, > > + const char *page, size_t count) > > +{ > > + unsigned long max_copy; > > + ssize_t ret = queue_var_store(&max_copy, page, count); > > + > > + if (ret < 0) > > + return ret; > > + > > + if (max_copy & (queue_logical_block_size(q) - 1)) > > + return -EINVAL; > > + > > + max_copy >>= 9; > > + if (max_copy > q->limits.max_hw_copy_sectors) > > + max_copy = q->limits.max_hw_copy_sectors; > > + > > + q->limits.max_copy_sectors = max_copy; > > + return ret; > > +} > > + > > +static ssize_t queue_copy_range_max_hw_show(struct request_queue *q, char *page) > > +{ > > + return sprintf(page, "%llu\n", > > + (unsigned long long)q->limits.max_hw_copy_range_sectors << 9); > > +} > > + > > +static ssize_t queue_copy_range_max_show(struct request_queue *q, > > + char *page) > > +{ > > + return sprintf(page, "%llu\n", > > + (unsigned long long)q->limits.max_copy_range_sectors << 9); > > +} > > + > > +static ssize_t queue_copy_range_max_store(struct request_queue *q, > > + const char *page, size_t count) > > +{ > > + unsigned long max_copy; > > + ssize_t ret = queue_var_store(&max_copy, page, count); > > + > > + if (ret < 0) > > + return ret; > > + > > + if (max_copy & (queue_logical_block_size(q) - 1)) > > + return -EINVAL; > > + > > + max_copy >>= 9; > > + if (max_copy > UINT_MAX) > > On 32-bits arch, unsigned long and unsigned int are the same so this test > is useless for these arch. Better have max_copy declared as unsigned long > long. > acked -- Nitesh Shetty
On 4/28/22 00:30, Nitesh Shetty wrote: >>> +/** >>> + * blk_queue_max_copy_sectors - set max sectors for a single copy payload >>> + * @q: the request queue for the device >>> + * @max_copy_sectors: maximum number of sectors to copy >>> + **/ >>> +void blk_queue_max_copy_sectors(struct request_queue *q, >> >> This should be blk_queue_max_copy_hw_sectors(). >> > > acked. Reasoning being, this function is used only by driver once for setting hw > limits ? function name points at what limit field it sets.
diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block index e8797cd09aff..65e64b5a0105 100644 --- a/Documentation/ABI/stable/sysfs-block +++ b/Documentation/ABI/stable/sysfs-block @@ -155,6 +155,89 @@ Description: last zone of the device which may be smaller. +What: /sys/block/<disk>/queue/copy_offload +Date: April 2022 +Contact: linux-block@vger.kernel.org +Description: + [RW] When read, this file shows whether offloading copy to + device is enabled (1) or disabled (0). Writing '0' to this + file will disable offloading copies for this device. + Writing any '1' value will enable this feature. + + +What: /sys/block/<disk>/queue/copy_max_bytes +Date: April 2022 +Contact: linux-block@vger.kernel.org +Description: + [RW] While 'copy_max_hw_bytes' is the hardware limit for the + device, 'copy_max_bytes' setting is the software limit. + Setting this value lower will make Linux issue smaller size + copies. + + +What: /sys/block/<disk>/queue/copy_max_hw_bytes +Date: April 2022 +Contact: linux-block@vger.kernel.org +Description: + [RO] Devices that support offloading copy functionality may have + internal limits on the number of bytes that can be offloaded + in a single operation. The `copy_max_hw_bytes` + parameter is set by the device driver to the maximum number of + bytes that can be copied in a single operation. Copy + requests issued to the device must not exceed this limit. + A value of 0 means that the device does not + support copy offload. + + +What: /sys/block/<disk>/queue/copy_max_nr_ranges +Date: April 2022 +Contact: linux-block@vger.kernel.org +Description: + [RW] While 'copy_max_nr_ranges_hw' is the hardware limit for the + device, 'copy_max_nr_ranges' setting is the software limit. + + +What: /sys/block/<disk>/queue/copy_max_nr_ranges_hw +Date: April 2022 +Contact: linux-block@vger.kernel.org +Description: + [RO] Devices that support offloading copy functionality may have + internal limits on the number of ranges in single copy operation + that can be offloaded in a single operation. + A range is tuple of source, destination and length of data + to be copied. The `copy_max_nr_ranges_hw` parameter is set by + the device driver to the maximum number of ranges that can be + copied in a single operation. Copy requests issued to the device + must not exceed this limit. A value of 0 means that the device + does not support copy offload. + + +What: /sys/block/<disk>/queue/copy_max_range_bytes +Date: April 2022 +Contact: linux-block@vger.kernel.org +Description: + [RW] While 'copy_max_range_hw_bytes' is the hardware limit for + the device, 'copy_max_range_bytes' setting is the software + limit. + + +What: /sys/block/<disk>/queue/copy_max_range_hw_bytes +Date: April 2022 +Contact: linux-block@vger.kernel.org +Description: + [RO] Devices that support offloading copy functionality may have + internal limits on the size of data, that can be copied in a + single range within a single copy operation. + A range is tuple of source, destination and length of data to be + copied. The `copy_max_range_hw_bytes` parameter is set by the + device driver to set the maximum length in bytes of a range + that can be copied in an operation. + Copy requests issued to the device must not exceed this limit. + Sum of sizes of all ranges in a single opeartion should not + exceed 'copy_max_hw_bytes'. A value of 0 means that the device + does not support copy offload. + + What: /sys/block/<disk>/queue/crypto/ Date: February 2022 Contact: linux-block@vger.kernel.org diff --git a/block/blk-settings.c b/block/blk-settings.c index 6ccceb421ed2..70167aee3bf7 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -57,6 +57,12 @@ void blk_set_default_limits(struct queue_limits *lim) lim->misaligned = 0; lim->zoned = BLK_ZONED_NONE; lim->zone_write_granularity = 0; + lim->max_hw_copy_sectors = 0; + lim->max_copy_sectors = 0; + lim->max_hw_copy_nr_ranges = 0; + lim->max_copy_nr_ranges = 0; + lim->max_hw_copy_range_sectors = 0; + lim->max_copy_range_sectors = 0; } EXPORT_SYMBOL(blk_set_default_limits); @@ -81,6 +87,12 @@ void blk_set_stacking_limits(struct queue_limits *lim) lim->max_dev_sectors = UINT_MAX; lim->max_write_zeroes_sectors = UINT_MAX; lim->max_zone_append_sectors = UINT_MAX; + lim->max_hw_copy_sectors = ULONG_MAX; + lim->max_copy_sectors = ULONG_MAX; + lim->max_hw_copy_range_sectors = UINT_MAX; + lim->max_copy_range_sectors = UINT_MAX; + lim->max_hw_copy_nr_ranges = USHRT_MAX; + lim->max_copy_nr_ranges = USHRT_MAX; } EXPORT_SYMBOL(blk_set_stacking_limits); @@ -177,6 +189,45 @@ void blk_queue_max_discard_sectors(struct request_queue *q, } EXPORT_SYMBOL(blk_queue_max_discard_sectors); +/** + * blk_queue_max_copy_sectors - set max sectors for a single copy payload + * @q: the request queue for the device + * @max_copy_sectors: maximum number of sectors to copy + **/ +void blk_queue_max_copy_sectors(struct request_queue *q, + unsigned int max_copy_sectors) +{ + q->limits.max_hw_copy_sectors = max_copy_sectors; + q->limits.max_copy_sectors = max_copy_sectors; +} +EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors); + +/** + * blk_queue_max_copy_range_sectors - set max sectors for a single range, in a copy payload + * @q: the request queue for the device + * @max_copy_range_sectors: maximum number of sectors to copy in a single range + **/ +void blk_queue_max_copy_range_sectors(struct request_queue *q, + unsigned int max_copy_range_sectors) +{ + q->limits.max_hw_copy_range_sectors = max_copy_range_sectors; + q->limits.max_copy_range_sectors = max_copy_range_sectors; +} +EXPORT_SYMBOL_GPL(blk_queue_max_copy_range_sectors); + +/** + * blk_queue_max_copy_nr_ranges - set max number of ranges, in a copy payload + * @q: the request queue for the device + * @max_copy_nr_ranges: maximum number of ranges + **/ +void blk_queue_max_copy_nr_ranges(struct request_queue *q, + unsigned int max_copy_nr_ranges) +{ + q->limits.max_hw_copy_nr_ranges = max_copy_nr_ranges; + q->limits.max_copy_nr_ranges = max_copy_nr_ranges; +} +EXPORT_SYMBOL_GPL(blk_queue_max_copy_nr_ranges); + /** * blk_queue_max_secure_erase_sectors - set max sectors for a secure erase * @q: the request queue for the device @@ -572,6 +623,14 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, t->max_segment_size = min_not_zero(t->max_segment_size, b->max_segment_size); + t->max_copy_sectors = min(t->max_copy_sectors, b->max_copy_sectors); + t->max_hw_copy_sectors = min(t->max_hw_copy_sectors, b->max_hw_copy_sectors); + t->max_copy_range_sectors = min(t->max_copy_range_sectors, b->max_copy_range_sectors); + t->max_hw_copy_range_sectors = min(t->max_hw_copy_range_sectors, + b->max_hw_copy_range_sectors); + t->max_copy_nr_ranges = min(t->max_copy_nr_ranges, b->max_copy_nr_ranges); + t->max_hw_copy_nr_ranges = min(t->max_hw_copy_nr_ranges, b->max_hw_copy_nr_ranges); + t->misaligned |= b->misaligned; alignment = queue_limit_alignment_offset(b, start); diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 88bd41d4cb59..bae987c10f7f 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -212,6 +212,129 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag return queue_var_show(0, page); } +static ssize_t queue_copy_offload_show(struct request_queue *q, char *page) +{ + return queue_var_show(blk_queue_copy(q), page); +} + +static ssize_t queue_copy_offload_store(struct request_queue *q, + const char *page, size_t count) +{ + unsigned long copy_offload; + ssize_t ret = queue_var_store(©_offload, page, count); + + if (ret < 0) + return ret; + + if (copy_offload && !q->limits.max_hw_copy_sectors) + return -EINVAL; + + if (copy_offload) + blk_queue_flag_set(QUEUE_FLAG_COPY, q); + else + blk_queue_flag_clear(QUEUE_FLAG_COPY, q); + + return ret; +} + +static ssize_t queue_copy_max_hw_show(struct request_queue *q, char *page) +{ + return sprintf(page, "%llu\n", + (unsigned long long)q->limits.max_hw_copy_sectors << 9); +} + +static ssize_t queue_copy_max_show(struct request_queue *q, char *page) +{ + return sprintf(page, "%llu\n", + (unsigned long long)q->limits.max_copy_sectors << 9); +} + +static ssize_t queue_copy_max_store(struct request_queue *q, + const char *page, size_t count) +{ + unsigned long max_copy; + ssize_t ret = queue_var_store(&max_copy, page, count); + + if (ret < 0) + return ret; + + if (max_copy & (queue_logical_block_size(q) - 1)) + return -EINVAL; + + max_copy >>= 9; + if (max_copy > q->limits.max_hw_copy_sectors) + max_copy = q->limits.max_hw_copy_sectors; + + q->limits.max_copy_sectors = max_copy; + return ret; +} + +static ssize_t queue_copy_range_max_hw_show(struct request_queue *q, char *page) +{ + return sprintf(page, "%llu\n", + (unsigned long long)q->limits.max_hw_copy_range_sectors << 9); +} + +static ssize_t queue_copy_range_max_show(struct request_queue *q, + char *page) +{ + return sprintf(page, "%llu\n", + (unsigned long long)q->limits.max_copy_range_sectors << 9); +} + +static ssize_t queue_copy_range_max_store(struct request_queue *q, + const char *page, size_t count) +{ + unsigned long max_copy; + ssize_t ret = queue_var_store(&max_copy, page, count); + + if (ret < 0) + return ret; + + if (max_copy & (queue_logical_block_size(q) - 1)) + return -EINVAL; + + max_copy >>= 9; + if (max_copy > UINT_MAX) + return -EINVAL; + + if (max_copy > q->limits.max_hw_copy_range_sectors) + max_copy = q->limits.max_hw_copy_range_sectors; + + q->limits.max_copy_range_sectors = max_copy; + return ret; +} + +static ssize_t queue_copy_nr_ranges_max_hw_show(struct request_queue *q, char *page) +{ + return queue_var_show(q->limits.max_hw_copy_nr_ranges, page); +} + +static ssize_t queue_copy_nr_ranges_max_show(struct request_queue *q, + char *page) +{ + return queue_var_show(q->limits.max_copy_nr_ranges, page); +} + +static ssize_t queue_copy_nr_ranges_max_store(struct request_queue *q, + const char *page, size_t count) +{ + unsigned long max_nr; + ssize_t ret = queue_var_store(&max_nr, page, count); + + if (ret < 0) + return ret; + + if (max_nr > USHRT_MAX) + return -EINVAL; + + if (max_nr > q->limits.max_hw_copy_nr_ranges) + max_nr = q->limits.max_hw_copy_nr_ranges; + + q->limits.max_copy_nr_ranges = max_nr; + return ret; +} + static ssize_t queue_write_same_max_show(struct request_queue *q, char *page) { return queue_var_show(0, page); @@ -596,6 +719,14 @@ QUEUE_RO_ENTRY(queue_nr_zones, "nr_zones"); QUEUE_RO_ENTRY(queue_max_open_zones, "max_open_zones"); QUEUE_RO_ENTRY(queue_max_active_zones, "max_active_zones"); +QUEUE_RW_ENTRY(queue_copy_offload, "copy_offload"); +QUEUE_RO_ENTRY(queue_copy_max_hw, "copy_max_hw_bytes"); +QUEUE_RW_ENTRY(queue_copy_max, "copy_max_bytes"); +QUEUE_RO_ENTRY(queue_copy_range_max_hw, "copy_max_range_hw_bytes"); +QUEUE_RW_ENTRY(queue_copy_range_max, "copy_max_range_bytes"); +QUEUE_RO_ENTRY(queue_copy_nr_ranges_max_hw, "copy_max_nr_ranges_hw"); +QUEUE_RW_ENTRY(queue_copy_nr_ranges_max, "copy_max_nr_ranges"); + QUEUE_RW_ENTRY(queue_nomerges, "nomerges"); QUEUE_RW_ENTRY(queue_rq_affinity, "rq_affinity"); QUEUE_RW_ENTRY(queue_poll, "io_poll"); @@ -642,6 +773,13 @@ static struct attribute *queue_attrs[] = { &queue_discard_max_entry.attr, &queue_discard_max_hw_entry.attr, &queue_discard_zeroes_data_entry.attr, + &queue_copy_offload_entry.attr, + &queue_copy_max_hw_entry.attr, + &queue_copy_max_entry.attr, + &queue_copy_range_max_hw_entry.attr, + &queue_copy_range_max_entry.attr, + &queue_copy_nr_ranges_max_hw_entry.attr, + &queue_copy_nr_ranges_max_entry.attr, &queue_write_same_max_entry.attr, &queue_write_zeroes_max_entry.attr, &queue_zone_append_max_entry.attr, diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 1b24c1fb3bb1..3596fd37fae7 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -270,6 +270,13 @@ struct queue_limits { unsigned int discard_alignment; unsigned int zone_write_granularity; + unsigned long max_hw_copy_sectors; + unsigned long max_copy_sectors; + unsigned int max_hw_copy_range_sectors; + unsigned int max_copy_range_sectors; + unsigned short max_hw_copy_nr_ranges; + unsigned short max_copy_nr_ranges; + unsigned short max_segments; unsigned short max_integrity_segments; unsigned short max_discard_segments; @@ -574,6 +581,7 @@ struct request_queue { #define QUEUE_FLAG_RQ_ALLOC_TIME 27 /* record rq->alloc_time_ns */ #define QUEUE_FLAG_HCTX_ACTIVE 28 /* at least one blk-mq hctx is active */ #define QUEUE_FLAG_NOWAIT 29 /* device supports NOWAIT */ +#define QUEUE_FLAG_COPY 30 /* supports copy offload */ #define QUEUE_FLAG_MQ_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \ (1 << QUEUE_FLAG_SAME_COMP) | \ @@ -596,6 +604,7 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q); test_bit(QUEUE_FLAG_STABLE_WRITES, &(q)->queue_flags) #define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags) #define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags) +#define blk_queue_copy(q) test_bit(QUEUE_FLAG_COPY, &(q)->queue_flags) #define blk_queue_zone_resetall(q) \ test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags) #define blk_queue_dax(q) test_bit(QUEUE_FLAG_DAX, &(q)->queue_flags) @@ -960,6 +969,10 @@ extern void blk_queue_chunk_sectors(struct request_queue *, unsigned int); extern void blk_queue_max_segments(struct request_queue *, unsigned short); extern void blk_queue_max_discard_segments(struct request_queue *, unsigned short); +extern void blk_queue_max_copy_sectors(struct request_queue *q, unsigned int max_copy_sectors); +extern void blk_queue_max_copy_range_sectors(struct request_queue *q, + unsigned int max_copy_range_sectors); +extern void blk_queue_max_copy_nr_ranges(struct request_queue *q, unsigned int max_copy_nr_ranges); void blk_queue_max_secure_erase_sectors(struct request_queue *q, unsigned int max_sectors); extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
Add device limits as sysfs entries, - copy_offload (RW) - copy_max_bytes (RW) - copy_max_hw_bytes (RO) - copy_max_range_bytes (RW) - copy_max_range_hw_bytes (RO) - copy_max_nr_ranges (RW) - copy_max_nr_ranges_hw (RO) Above limits help to split the copy payload in block layer. copy_offload, used for setting copy offload(1) or emulation(0). copy_max_bytes: maximum total length of copy in single payload. copy_max_range_bytes: maximum length in a single entry. copy_max_nr_ranges: maximum number of entries in a payload. copy_max_*_hw_*: Reflects the device supported maximum limits. Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> Signed-off-by: Arnav Dawn <arnav.dawn@samsung.com> --- Documentation/ABI/stable/sysfs-block | 83 ++++++++++++++++ block/blk-settings.c | 59 ++++++++++++ block/blk-sysfs.c | 138 +++++++++++++++++++++++++++ include/linux/blkdev.h | 13 +++ 4 files changed, 293 insertions(+)