diff mbox series

[v4] ASoC: SOF: ipc3-topology: Correct get_control_data for non bytes payload

Message ID 20220427185221.28928-1-peter.ujfalusi@linux.intel.com (mailing list archive)
State Accepted
Commit a962890a5a3cce903ff7c7a19fadee63ed9efdc7
Headers show
Series [v4] ASoC: SOF: ipc3-topology: Correct get_control_data for non bytes payload | expand

Commit Message

Peter Ujfalusi April 27, 2022, 6:52 p.m. UTC
It is possible to craft a topology where sof_get_control_data() would do
out of bounds access because it expects that it is only called when the
payload is bytes type.
Confusingly it also handles other types of controls, but the payload
parsing implementation is only valid for bytes.

Fix the code to count the non bytes controls and instead of storing a
pointer to sof_abi_hdr in sof_widget_data (which is only valid for bytes),
store the pointer to the data itself and add a new member to save the size
of the data.

In case of non bytes controls we store the pointer to the chanv itself,
which is just an array of values at the end.

In case of bytes control, drop the wrong cdata->data (wdata[i].pdata) check
against NULL since it is incorrect and invalid in this context.
The data is pointing to the end of cdata struct, so it should never be
null.

Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
---
Hi,

Changes since v3:
- Move the comment about validating data along with the code which validates the
  data (checks the SOF_ABI_MAGIC)

Changes since v2:
- Drop the cdata->data check against NULL as it is not a valid test and since we
  are in sof_get_control_data() the memory has been already allocated

changes since v1:
- adjust the payload size for non bytes controls by subtracting the size of the
  sof_ipc_ctrl_data struct, plus add comment to note this

Regards,
Peter
 sound/soc/sof/ipc3-topology.c | 39 +++++++++++++++++++++++------------
 1 file changed, 26 insertions(+), 13 deletions(-)

Comments

Sergey Senozhatsky April 28, 2022, 3:57 a.m. UTC | #1
On (22/04/27 21:52), Peter Ujfalusi wrote:
> It is possible to craft a topology where sof_get_control_data() would do
> out of bounds access because it expects that it is only called when the
> payload is bytes type.
> Confusingly it also handles other types of controls, but the payload
> parsing implementation is only valid for bytes.
> 
> Fix the code to count the non bytes controls and instead of storing a
> pointer to sof_abi_hdr in sof_widget_data (which is only valid for bytes),
> store the pointer to the data itself and add a new member to save the size
> of the data.
> 
> In case of non bytes controls we store the pointer to the chanv itself,
> which is just an array of values at the end.
> 
> In case of bytes control, drop the wrong cdata->data (wdata[i].pdata) check
> against NULL since it is incorrect and invalid in this context.
> The data is pointing to the end of cdata struct, so it should never be
> null.
> 
> Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>

FWIW
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Mark Brown May 3, 2022, 3:51 p.m. UTC | #2
On Wed, 27 Apr 2022 21:52:21 +0300, Peter Ujfalusi wrote:
> It is possible to craft a topology where sof_get_control_data() would do
> out of bounds access because it expects that it is only called when the
> payload is bytes type.
> Confusingly it also handles other types of controls, but the payload
> parsing implementation is only valid for bytes.
> 
> Fix the code to count the non bytes controls and instead of storing a
> pointer to sof_abi_hdr in sof_widget_data (which is only valid for bytes),
> store the pointer to the data itself and add a new member to save the size
> of the data.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: SOF: ipc3-topology: Correct get_control_data for non bytes payload
      commit: a962890a5a3cce903ff7c7a19fadee63ed9efdc7

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/sound/soc/sof/ipc3-topology.c b/sound/soc/sof/ipc3-topology.c
index 572bcbfdb356..bc848f556b88 100644
--- a/sound/soc/sof/ipc3-topology.c
+++ b/sound/soc/sof/ipc3-topology.c
@@ -20,7 +20,8 @@ 
 struct sof_widget_data {
 	int ctrl_type;
 	int ipc_cmd;
-	struct sof_abi_hdr *pdata;
+	void *pdata;
+	size_t pdata_size;
 	struct snd_sof_control *control;
 };
 
@@ -784,16 +785,26 @@  static int sof_get_control_data(struct snd_soc_component *scomp,
 		}
 
 		cdata = wdata[i].control->ipc_control_data;
-		wdata[i].pdata = cdata->data;
-		if (!wdata[i].pdata)
-			return -EINVAL;
 
-		/* make sure data is valid - data can be updated at runtime */
-		if (widget->dobj.widget.kcontrol_type[i] == SND_SOC_TPLG_TYPE_BYTES &&
-		    wdata[i].pdata->magic != SOF_ABI_MAGIC)
-			return -EINVAL;
+		if (widget->dobj.widget.kcontrol_type[i] == SND_SOC_TPLG_TYPE_BYTES) {
+			/* make sure data is valid - data can be updated at runtime */
+			if (cdata->data->magic != SOF_ABI_MAGIC)
+				return -EINVAL;
+
+			wdata[i].pdata = cdata->data->data;
+			wdata[i].pdata_size = cdata->data->size;
+		} else {
+			/* points to the control data union */
+			wdata[i].pdata = cdata->chanv;
+			/*
+			 * wdata[i].control->size is calculated with struct_size
+			 * and includes the size of struct sof_ipc_ctrl_data
+			 */
+			wdata[i].pdata_size = wdata[i].control->size -
+					      sizeof(struct sof_ipc_ctrl_data);
+		}
 
-		*size += wdata[i].pdata->size;
+		*size += wdata[i].pdata_size;
 
 		/* get data type */
 		switch (cdata->cmd) {
@@ -876,10 +887,12 @@  static int sof_process_load(struct snd_soc_component *scomp,
 	 */
 	if (ipc_data_size) {
 		for (i = 0; i < widget->num_kcontrols; i++) {
-			memcpy(&process->data[offset],
-			       wdata[i].pdata->data,
-			       wdata[i].pdata->size);
-			offset += wdata[i].pdata->size;
+			if (!wdata[i].pdata_size)
+				continue;
+
+			memcpy(&process->data[offset], wdata[i].pdata,
+			       wdata[i].pdata_size);
+			offset += wdata[i].pdata_size;
 		}
 	}