| Message ID | 20220419163810.2118169-19-arnd@kernel.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | ARM: PXA multiplatform support | expand |
On Tue, Apr 19, 2022 at 6:41 PM Arnd Bergmann <arnd@kernel.org> wrote: > From: Arnd Bergmann <arnd@arndb.de> > > The audio driver should not use a hardwired gpio number > from the header. Change it to use a lookup table. > > Cc: Philipp Zabel <philipp.zabel@gmail.com> > Cc: Paul Parsons <lost.distance@yahoo.com> > Acked-by: Mark Brown <broonie@kernel.org> > Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> > Cc: alsa-devel@alsa-project.org > Signed-off-by: Arnd Bergmann <arnd@arndb.de> (...) > +static struct gpiod_lookup_table hx4700_audio_gpio_table = { > + .dev_id = "hx4700-audio", > + .table = { > + GPIO_LOOKUP("gpio-pxa", GPIO75_HX4700_EARPHONE_nDET, > + "earphone-ndet", GPIO_ACTIVE_HIGH), This looks wrong. The n in nDET in the end of the name of the GPIO line means active low does it not? What I usually do when I see this is to properly set it to GPIO_ACTIVE_LOW in the descriptor table, then invert the logic where it's getting used. Also rename to earphone-det instead of -ndet > + GPIO_LOOKUP("gpio-pxa", GPIO92_HX4700_HP_DRIVER, > + "hp-driver", GPIO_ACTIVE_HIGH), > + GPIO_LOOKUP("gpio-pxa", GPIO107_HX4700_SPK_nSD, > + "spk-nsd", GPIO_ACTIVE_HIGH), Same here. Rename spk-sd Yours, Linus Walleij
On Sun, May 1, 2022 at 11:41 PM Linus Walleij <linus.walleij@linaro.org> wrote: > > (...) > > +static struct gpiod_lookup_table hx4700_audio_gpio_table = { > > + .dev_id = "hx4700-audio", > > + .table = { > > + GPIO_LOOKUP("gpio-pxa", GPIO75_HX4700_EARPHONE_nDET, > > + "earphone-ndet", GPIO_ACTIVE_HIGH), > > This looks wrong. The n in nDET in the end of the name of the GPIO line > means active low does it not? > > What I usually do when I see this is to properly set it to > GPIO_ACTIVE_LOW in the descriptor table, then invert the logic > where it's getting used. > > Also rename to earphone-det instead of -ndet Thanks for taking a look! I changed it now, but I don't know if I got the correct number of inversions in the end. How does this look? Arnd commit 9d452c9cbee59fc58c940b5f7ae5a40579aab0d2 Author: Arnd Bergmann <arnd@arndb.de> Date: Wed Sep 11 14:27:13 2019 +0200 ARM: pxa: hx4700: use gpio descriptors for audio The audio driver should not use a hardwired gpio number from the header. Change it to use a lookup table. Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Paul Parsons <lost.distance@yahoo.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> diff --git a/arch/arm/mach-pxa/hx4700-pcmcia.c b/arch/arm/mach-pxa/hx4700-pcmcia.c index e8acbfc9ef6c..e2331dfe427d 100644 --- a/arch/arm/mach-pxa/hx4700-pcmcia.c +++ b/arch/arm/mach-pxa/hx4700-pcmcia.c @@ -10,7 +10,7 @@ #include <linux/irq.h> #include <asm/mach-types.h> -#include <mach/hx4700.h> +#include "hx4700.h" #include <pcmcia/soc_common.h> diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 140a44cb2989..2ae06edf413c 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -41,7 +41,7 @@ #include "pxa27x.h" #include "addr-map.h" -#include <mach/hx4700.h> +#include "hx4700.h" #include <linux/platform_data/irda-pxaficp.h> #include <sound/ak4641.h> @@ -834,6 +834,19 @@ static struct i2c_board_info i2c_board_info[] __initdata = { }, }; +static struct gpiod_lookup_table hx4700_audio_gpio_table = { + .dev_id = "hx4700-audio", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO75_HX4700_EARPHONE_nDET, + "earphone-det", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO92_HX4700_HP_DRIVER, + "hp-driver", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO107_HX4700_SPK_nSD, + "spk-sd", GPIO_ACTIVE_LOW), + { }, + }, +}; + static struct platform_device audio = { .name = "hx4700-audio", .id = -1, @@ -895,6 +908,7 @@ static void __init hx4700_init(void) gpiod_add_lookup_table(&bq24022_gpiod_table); gpiod_add_lookup_table(&gpio_vbus_gpiod_table); + gpiod_add_lookup_table(&hx4700_audio_gpio_table); platform_add_devices(devices, ARRAY_SIZE(devices)); pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup)); diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/hx4700.h similarity index 99% rename from arch/arm/mach-pxa/include/mach/hx4700.h rename to arch/arm/mach-pxa/hx4700.h index 0c30e6d9c660..ce2db33989e1 100644 --- a/arch/arm/mach-pxa/include/mach/hx4700.h +++ b/arch/arm/mach-pxa/hx4700.h @@ -10,7 +10,7 @@ #include <linux/gpio.h> #include <linux/mfd/asic3.h> -#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */ +#include <mach/irqs.h> /* PXA_NR_BUILTIN_GPIO */ #define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO #define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS) diff --git a/sound/soc/pxa/hx4700.c b/sound/soc/pxa/hx4700.c index 7334fac758de..a0734b742322 100644 --- a/sound/soc/pxa/hx4700.c +++ b/sound/soc/pxa/hx4700.c @@ -10,7 +10,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/delay.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <sound/core.h> #include <sound/jack.h> @@ -18,10 +18,10 @@ #include <sound/pcm_params.h> #include <sound/soc.h> -#include <mach/hx4700.h> #include <asm/mach-types.h> #include "pxa2xx-i2s.h" +static struct gpio_desc *gpiod_hp_driver, *gpiod_spk_sd; static struct snd_soc_jack hs_jack; /* Headphones jack detection DAPM pin */ @@ -40,9 +40,7 @@ static struct snd_soc_jack_pin hs_jack_pin[] = { /* Headphones jack detection GPIO */ static struct snd_soc_jack_gpio hs_jack_gpio = { - .gpio = GPIO75_HX4700_EARPHONE_nDET, - .invert = true, - .name = "hp-gpio", + .name = "earphone-det", .report = SND_JACK_HEADPHONE, .debounce_time = 200, }; @@ -81,14 +79,14 @@ static const struct snd_soc_ops hx4700_ops = { static int hx4700_spk_power(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - gpio_set_value(GPIO107_HX4700_SPK_nSD, !!SND_SOC_DAPM_EVENT_ON(event)); + gpiod_set_value(gpiod_spk_sd, !!SND_SOC_DAPM_EVENT_ON(event)); return 0; } static int hx4700_hp_power(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - gpio_set_value(GPIO92_HX4700_HP_DRIVER, !!SND_SOC_DAPM_EVENT_ON(event)); + gpiod_set_value(gpiod_hp_driver, !!SND_SOC_DAPM_EVENT_ON(event)); return 0; } @@ -162,11 +160,6 @@ static struct snd_soc_card snd_soc_card_hx4700 = { .fully_routed = true, }; -static struct gpio hx4700_audio_gpios[] = { - { GPIO107_HX4700_SPK_nSD, GPIOF_OUT_INIT_HIGH, "SPK_POWER" }, - { GPIO92_HX4700_HP_DRIVER, GPIOF_OUT_INIT_LOW, "EP_POWER" }, -}; - static int hx4700_audio_probe(struct platform_device *pdev) { int ret; @@ -174,26 +167,26 @@ static int hx4700_audio_probe(struct platform_device *pdev) if (!machine_is_h4700()) return -ENODEV; - ret = gpio_request_array(hx4700_audio_gpios, - ARRAY_SIZE(hx4700_audio_gpios)); + gpiod_hp_driver = devm_gpiod_get(&pdev->dev, "hp-driver", GPIOD_OUT_HIGH); + ret = PTR_ERR_OR_ZERO(gpiod_hp_driver); + if (ret) + return ret; + gpiod_spk_sd = devm_gpiod_get(&pdev->dev, "spk-sd", GPIOD_OUT_LOW); + ret = PTR_ERR_OR_ZERO(gpiod_spk_sd); if (ret) return ret; + hs_jack_gpio.gpiod_dev = &pdev->dev; snd_soc_card_hx4700.dev = &pdev->dev; ret = devm_snd_soc_register_card(&pdev->dev, &snd_soc_card_hx4700); - if (ret) - gpio_free_array(hx4700_audio_gpios, - ARRAY_SIZE(hx4700_audio_gpios)); return ret; } static int hx4700_audio_remove(struct platform_device *pdev) { - gpio_set_value(GPIO92_HX4700_HP_DRIVER, 0); - gpio_set_value(GPIO107_HX4700_SPK_nSD, 0); - - gpio_free_array(hx4700_audio_gpios, ARRAY_SIZE(hx4700_audio_gpios)); + gpiod_set_value(gpiod_hp_driver, 0); + gpiod_set_value(gpiod_spk_sd, 0); return 0; }
On Mon, May 2, 2022 at 9:08 AM Arnd Bergmann <arnd@kernel.org> wrote: > On Sun, May 1, 2022 at 11:41 PM Linus Walleij <linus.walleij@linaro.org> wrote: > > > > (...) > > > +static struct gpiod_lookup_table hx4700_audio_gpio_table = { > > > + .dev_id = "hx4700-audio", > > > + .table = { > > > + GPIO_LOOKUP("gpio-pxa", GPIO75_HX4700_EARPHONE_nDET, > > > + "earphone-ndet", GPIO_ACTIVE_HIGH), > > > > This looks wrong. The n in nDET in the end of the name of the GPIO line > > means active low does it not? > > > > What I usually do when I see this is to properly set it to > > GPIO_ACTIVE_LOW in the descriptor table, then invert the logic > > where it's getting used. > > > > Also rename to earphone-det instead of -ndet > > Thanks for taking a look! I changed it now, but I don't know if > I got the correct number of inversions in the end. How does this look? Looks wrong, you can just invert the argument to any statement of set_value() after tagging respective line as active low. Then gpilob will do a second inversion. > + GPIO_LOOKUP("gpio-pxa", GPIO75_HX4700_EARPHONE_nDET, > + "earphone-det", GPIO_ACTIVE_LOW), > + GPIO_LOOKUP("gpio-pxa", GPIO107_HX4700_SPK_nSD, > + "spk-sd", GPIO_ACTIVE_LOW), So those two have switched polarity. > @@ -81,14 +79,14 @@ static const struct snd_soc_ops hx4700_ops = { > static int hx4700_spk_power(struct snd_soc_dapm_widget *w, > struct snd_kcontrol *k, int event) > { > - gpio_set_value(GPIO107_HX4700_SPK_nSD, !!SND_SOC_DAPM_EVENT_ON(event)); > + gpiod_set_value(gpiod_spk_sd, !!SND_SOC_DAPM_EVENT_ON(event)); Thus drop one ! in front of the expression, just !SND_SOC_DAPM_EVENT_ON(event) > - gpio_set_value(GPIO92_HX4700_HP_DRIVER, !!SND_SOC_DAPM_EVENT_ON(event)); > + gpiod_set_value(gpiod_hp_driver, !!SND_SOC_DAPM_EVENT_ON(event)); But not this. > + gpiod_spk_sd = devm_gpiod_get(&pdev->dev, "spk-sd", GPIOD_OUT_LOW); These initial values don't seem to be set in the old code you could just use GPIOD_ASIS as flag to make sure the new code behaves the same. Yours, Linus Walleij
On Wed, May 4, 2022 at 11:59 PM Linus Walleij <linus.walleij@linaro.org> wrote: > On Mon, May 2, 2022 at 9:08 AM Arnd Bergmann <arnd@kernel.org> wrote: > > On Sun, May 1, 2022 at 11:41 PM Linus Walleij <linus.walleij@linaro.org> wrote: > > > > > > (...) > > > > +static struct gpiod_lookup_table hx4700_audio_gpio_table = { > > > > + .dev_id = "hx4700-audio", > > > > + .table = { > > > > + GPIO_LOOKUP("gpio-pxa", GPIO75_HX4700_EARPHONE_nDET, > > > > + "earphone-ndet", GPIO_ACTIVE_HIGH), > > > > > > This looks wrong. The n in nDET in the end of the name of the GPIO line > > > means active low does it not? > > > > > > What I usually do when I see this is to properly set it to > > > GPIO_ACTIVE_LOW in the descriptor table, then invert the logic > > > where it's getting used. > > > > > > Also rename to earphone-det instead of -ndet > > > > Thanks for taking a look! I changed it now, but I don't know if > > I got the correct number of inversions in the end. How does this look? > > Looks wrong, you can just invert the argument to any statement of set_value() > after tagging respective line as active low. Then gpilob will do a second > inversion. > > > + GPIO_LOOKUP("gpio-pxa", GPIO75_HX4700_EARPHONE_nDET, > > + "earphone-det", GPIO_ACTIVE_LOW), > > + GPIO_LOOKUP("gpio-pxa", GPIO107_HX4700_SPK_nSD, > > + "spk-sd", GPIO_ACTIVE_LOW), > > So those two have switched polarity. > > > @@ -81,14 +79,14 @@ static const struct snd_soc_ops hx4700_ops = { > > static int hx4700_spk_power(struct snd_soc_dapm_widget *w, > > struct snd_kcontrol *k, int event) > > { > > - gpio_set_value(GPIO107_HX4700_SPK_nSD, !!SND_SOC_DAPM_EVENT_ON(event)); > > + gpiod_set_value(gpiod_spk_sd, !!SND_SOC_DAPM_EVENT_ON(event)); > > Thus drop one ! in front of the expression, just !SND_SOC_DAPM_EVENT_ON(event) Ok, done. But I still leave the extra 'invert=1' in hs_jack_pin[], right? /* Headphones jack detection DAPM pin */ static struct snd_soc_jack_pin hs_jack_pin[] = { { .pin = "Headphone Jack", .mask = SND_JACK_HEADPHONE, }, { .pin = "Speaker", /* disable speaker when hp jack is inserted */ .mask = SND_JACK_HEADPHONE, .invert = 1, }, }; > > + gpiod_spk_sd = devm_gpiod_get(&pdev->dev, "spk-sd", GPIOD_OUT_LOW); > > These initial values don't seem to be set in the old code you could > just use GPIOD_ASIS as flag to make sure the new code behaves > the same. Ok. Arnd
On Thu, May 5, 2022 at 8:04 AM Arnd Bergmann <arnd@kernel.org> wrote: > On Wed, May 4, 2022 at 11:59 PM Linus Walleij <linus.walleij@linaro.org> wrote: > > Thus drop one ! in front of the expression, just !SND_SOC_DAPM_EVENT_ON(event) > > Ok, done. But I still leave the extra 'invert=1' in hs_jack_pin[], right? > > /* Headphones jack detection DAPM pin */ > static struct snd_soc_jack_pin hs_jack_pin[] = { > { > .pin = "Headphone Jack", > .mask = SND_JACK_HEADPHONE, > }, > { > .pin = "Speaker", > /* disable speaker when hp jack is inserted */ > .mask = SND_JACK_HEADPHONE, > .invert = 1, > }, Hm some ASoC thingie. No idea what that is, but I suppose another place where a subsystem for legacy reasons try to do the gpiolib inversion on it's own accord. That one isn't flagged as active low in the descriptor so it's fine I guess. Possible this should be fixed in ASoC to rely on gpiolib but we can't fix the entire world. Yours, Linus Walleij
On Thu, May 05, 2022 at 04:33:06PM +0200, Linus Walleij wrote: > On Thu, May 5, 2022 at 8:04 AM Arnd Bergmann <arnd@kernel.org> wrote: > > /* Headphones jack detection DAPM pin */ > > static struct snd_soc_jack_pin hs_jack_pin[] = { > > { > > .pin = "Headphone Jack", > > .mask = SND_JACK_HEADPHONE, > > }, > > { > > .pin = "Speaker", > > /* disable speaker when hp jack is inserted */ > > .mask = SND_JACK_HEADPHONE, > > .invert = 1, > > }, > Hm some ASoC thingie. No idea what that is, but I suppose another > place where a subsystem for legacy reasons try to do the gpiolib > inversion on it's own accord. That one isn't flagged as active low in the > descriptor so it's fine I guess. It's saying that when the headphone is inserted the headphone output should be enabled and the speaker output should be disabled, and vice versa. > Possible this should be fixed in ASoC to rely on gpiolib but we can't > fix the entire world. I don't think so.
On Thu, May 5, 2022 at 4:39 PM Mark Brown <broonie@kernel.org> wrote: > On Thu, May 05, 2022 at 04:33:06PM +0200, Linus Walleij wrote: > > On Thu, May 5, 2022 at 8:04 AM Arnd Bergmann <arnd@kernel.org> wrote: > > > > /* Headphones jack detection DAPM pin */ > > > static struct snd_soc_jack_pin hs_jack_pin[] = { > > > { > > > .pin = "Headphone Jack", > > > .mask = SND_JACK_HEADPHONE, > > > }, > > > { > > > .pin = "Speaker", > > > /* disable speaker when hp jack is inserted */ > > > .mask = SND_JACK_HEADPHONE, > > > .invert = 1, > > > }, > > > Hm some ASoC thingie. No idea what that is, but I suppose another > > place where a subsystem for legacy reasons try to do the gpiolib > > inversion on it's own accord. That one isn't flagged as active low in the > > descriptor so it's fine I guess. > > It's saying that when the headphone is inserted the headphone output > should be enabled and the speaker output should be disabled, and vice > versa. Ok, that sounds like I should remove the flag here if I declare the GPIO line as GPIO_ACTIVE_LOW instead of GPIO_ACTIVE_HIGH, right? Arnd
On Thu, May 05, 2022 at 04:59:35PM +0200, Arnd Bergmann wrote: > On Thu, May 5, 2022 at 4:39 PM Mark Brown <broonie@kernel.org> wrote: > > On Thu, May 05, 2022 at 04:33:06PM +0200, Linus Walleij wrote: > > > On Thu, May 5, 2022 at 8:04 AM Arnd Bergmann <arnd@kernel.org> wrote: > > > > static struct snd_soc_jack_pin hs_jack_pin[] = { > > > > { > > > > .pin = "Headphone Jack", > > > > .mask = SND_JACK_HEADPHONE, > > > > }, > > > > { > > > > .pin = "Speaker", > > > > /* disable speaker when hp jack is inserted */ > > > > .mask = SND_JACK_HEADPHONE, > > > > .invert = 1, > > > > }, > > > Hm some ASoC thingie. No idea what that is, but I suppose another > > > place where a subsystem for legacy reasons try to do the gpiolib > > > inversion on it's own accord. That one isn't flagged as active low in the > > > descriptor so it's fine I guess. > > It's saying that when the headphone is inserted the headphone output > > should be enabled and the speaker output should be disabled, and vice > > versa. > Ok, that sounds like I should remove the flag here if I declare the > GPIO line as GPIO_ACTIVE_LOW instead of GPIO_ACTIVE_HIGH, right? If you change the sense of the GPIO you'll need to flip the invert to the headphone instead of the speaker - whichever way round the GPIO sense is each of the pins should be taking the opposite sense from the GPIO state to the other.
On Thu, May 5, 2022 at 5:04 PM Mark Brown <broonie@kernel.org> wrote: > On Thu, May 05, 2022 at 04:59:35PM +0200, Arnd Bergmann wrote: > > On Thu, May 5, 2022 at 4:39 PM Mark Brown <broonie@kernel.org> wrote: > > > On Thu, May 05, 2022 at 04:33:06PM +0200, Linus Walleij wrote: > > > > On Thu, May 5, 2022 at 8:04 AM Arnd Bergmann <arnd@kernel.org> wrote: > > > > > > static struct snd_soc_jack_pin hs_jack_pin[] = { > > > > > { > > > > > .pin = "Headphone Jack", > > > > > .mask = SND_JACK_HEADPHONE, > > > > > }, > > > > > { > > > > > .pin = "Speaker", > > > > > /* disable speaker when hp jack is inserted */ > > > > > .mask = SND_JACK_HEADPHONE, > > > > > .invert = 1, > > > > > }, > > > > > Hm some ASoC thingie. No idea what that is, but I suppose another > > > > place where a subsystem for legacy reasons try to do the gpiolib > > > > inversion on it's own accord. That one isn't flagged as active low in the > > > > descriptor so it's fine I guess. > > > > It's saying that when the headphone is inserted the headphone output > > > should be enabled and the speaker output should be disabled, and vice > > > versa. > > > Ok, that sounds like I should remove the flag here if I declare the > > GPIO line as GPIO_ACTIVE_LOW instead of GPIO_ACTIVE_HIGH, right? > > If you change the sense of the GPIO you'll need to flip the invert to > the headphone instead of the speaker - whichever way round the GPIO > sense is each of the pins should be taking the opposite sense from the > GPIO state to the other. Ok, I hope I got it this time: - The hs_jack_gpio/"earphone-det" is declared as GPIO_ACTIVE_LOW, with the ".invert" dropped in the snd_soc_jack_gpio definition to match - "spk-sd" is declared as GPIO_ACTIVE_LOW, so both this and "hp-driver" are enabled by setting the gpio to active, rather than the two being opposites - snd_soc_jack_pin flips the 'invert' flag from speaker to headphone, since the "earphone-det" is now reversed - hx4700_spk_power() flips polarity when setting the output to match the GPIO_ACTIVE_LOW setting, but hx4700_hp_power() does not change. Arnd commit 20a9b05eff0488b78aa02c07f58654daa294069a Author: Arnd Bergmann <arnd@arndb.de> Date: Wed Sep 11 14:27:13 2019 +0200 ARM: pxa: hx4700: use gpio descriptors for audio The audio driver should not use a hardwired gpio number from the header. Change it to use a lookup table. Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Paul Parsons <lost.distance@yahoo.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> diff --git a/arch/arm/mach-pxa/hx4700-pcmcia.c b/arch/arm/mach-pxa/hx4700-pcmcia.c index e8acbfc9ef6c..e2331dfe427d 100644 --- a/arch/arm/mach-pxa/hx4700-pcmcia.c +++ b/arch/arm/mach-pxa/hx4700-pcmcia.c @@ -10,7 +10,7 @@ #include <linux/irq.h> #include <asm/mach-types.h> -#include <mach/hx4700.h> +#include "hx4700.h" #include <pcmcia/soc_common.h> diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 140a44cb2989..2ae06edf413c 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -41,7 +41,7 @@ #include "pxa27x.h" #include "addr-map.h" -#include <mach/hx4700.h> +#include "hx4700.h" #include <linux/platform_data/irda-pxaficp.h> #include <sound/ak4641.h> @@ -834,6 +834,19 @@ static struct i2c_board_info i2c_board_info[] __initdata = { }, }; +static struct gpiod_lookup_table hx4700_audio_gpio_table = { + .dev_id = "hx4700-audio", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO75_HX4700_EARPHONE_nDET, + "earphone-det", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO92_HX4700_HP_DRIVER, + "hp-driver", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO107_HX4700_SPK_nSD, + "spk-sd", GPIO_ACTIVE_LOW), + { }, + }, +}; + static struct platform_device audio = { .name = "hx4700-audio", .id = -1, @@ -895,6 +908,7 @@ static void __init hx4700_init(void) gpiod_add_lookup_table(&bq24022_gpiod_table); gpiod_add_lookup_table(&gpio_vbus_gpiod_table); + gpiod_add_lookup_table(&hx4700_audio_gpio_table); platform_add_devices(devices, ARRAY_SIZE(devices)); pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup)); diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/hx4700.h similarity index 99% rename from arch/arm/mach-pxa/include/mach/hx4700.h rename to arch/arm/mach-pxa/hx4700.h index 0c30e6d9c660..ce2db33989e1 100644 --- a/arch/arm/mach-pxa/include/mach/hx4700.h +++ b/arch/arm/mach-pxa/hx4700.h @@ -10,7 +10,7 @@ #include <linux/gpio.h> #include <linux/mfd/asic3.h> -#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */ +#include <mach/irqs.h> /* PXA_NR_BUILTIN_GPIO */ #define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO #define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS) diff --git a/sound/soc/pxa/hx4700.c b/sound/soc/pxa/hx4700.c index 7334fac758de..e6473c50e512 100644 --- a/sound/soc/pxa/hx4700.c +++ b/sound/soc/pxa/hx4700.c @@ -10,7 +10,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/delay.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <sound/core.h> #include <sound/jack.h> @@ -18,10 +18,10 @@ #include <sound/pcm_params.h> #include <sound/soc.h> -#include <mach/hx4700.h> #include <asm/mach-types.h> #include "pxa2xx-i2s.h" +static struct gpio_desc *gpiod_hp_driver, *gpiod_spk_sd; static struct snd_soc_jack hs_jack; /* Headphones jack detection DAPM pin */ @@ -29,20 +29,18 @@ static struct snd_soc_jack_pin hs_jack_pin[] = { { .pin = "Headphone Jack", .mask = SND_JACK_HEADPHONE, + .invert = 1, }, { .pin = "Speaker", /* disable speaker when hp jack is inserted */ .mask = SND_JACK_HEADPHONE, - .invert = 1, }, }; /* Headphones jack detection GPIO */ static struct snd_soc_jack_gpio hs_jack_gpio = { - .gpio = GPIO75_HX4700_EARPHONE_nDET, - .invert = true, - .name = "hp-gpio", + .name = "earphone-det", .report = SND_JACK_HEADPHONE, .debounce_time = 200, }; @@ -81,14 +79,14 @@ static const struct snd_soc_ops hx4700_ops = { static int hx4700_spk_power(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - gpio_set_value(GPIO107_HX4700_SPK_nSD, !!SND_SOC_DAPM_EVENT_ON(event)); + gpiod_set_value(gpiod_spk_sd, !SND_SOC_DAPM_EVENT_ON(event)); return 0; } static int hx4700_hp_power(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - gpio_set_value(GPIO92_HX4700_HP_DRIVER, !!SND_SOC_DAPM_EVENT_ON(event)); + gpiod_set_value(gpiod_hp_driver, !!SND_SOC_DAPM_EVENT_ON(event)); return 0; } @@ -162,11 +160,6 @@ static struct snd_soc_card snd_soc_card_hx4700 = { .fully_routed = true, }; -static struct gpio hx4700_audio_gpios[] = { - { GPIO107_HX4700_SPK_nSD, GPIOF_OUT_INIT_HIGH, "SPK_POWER" }, - { GPIO92_HX4700_HP_DRIVER, GPIOF_OUT_INIT_LOW, "EP_POWER" }, -}; - static int hx4700_audio_probe(struct platform_device *pdev) { int ret; @@ -174,26 +167,26 @@ static int hx4700_audio_probe(struct platform_device *pdev) if (!machine_is_h4700()) return -ENODEV; - ret = gpio_request_array(hx4700_audio_gpios, - ARRAY_SIZE(hx4700_audio_gpios)); + gpiod_hp_driver = devm_gpiod_get(&pdev->dev, "hp-driver", GPIOD_ASIS); + ret = PTR_ERR_OR_ZERO(gpiod_hp_driver); + if (ret) + return ret; + gpiod_spk_sd = devm_gpiod_get(&pdev->dev, "spk-sd", GPIOD_ASIS); + ret = PTR_ERR_OR_ZERO(gpiod_spk_sd); if (ret) return ret; + hs_jack_gpio.gpiod_dev = &pdev->dev; snd_soc_card_hx4700.dev = &pdev->dev; ret = devm_snd_soc_register_card(&pdev->dev, &snd_soc_card_hx4700); - if (ret) - gpio_free_array(hx4700_audio_gpios, - ARRAY_SIZE(hx4700_audio_gpios)); return ret; } static int hx4700_audio_remove(struct platform_device *pdev) { - gpio_set_value(GPIO92_HX4700_HP_DRIVER, 0); - gpio_set_value(GPIO107_HX4700_SPK_nSD, 0); - - gpio_free_array(hx4700_audio_gpios, ARRAY_SIZE(hx4700_audio_gpios)); + gpiod_set_value(gpiod_hp_driver, 0); + gpiod_set_value(gpiod_spk_sd, 0); return 0; }
diff --git a/arch/arm/mach-pxa/hx4700-pcmcia.c b/arch/arm/mach-pxa/hx4700-pcmcia.c index e8acbfc9ef6c..e2331dfe427d 100644 --- a/arch/arm/mach-pxa/hx4700-pcmcia.c +++ b/arch/arm/mach-pxa/hx4700-pcmcia.c @@ -10,7 +10,7 @@ #include <linux/irq.h> #include <asm/mach-types.h> -#include <mach/hx4700.h> +#include "hx4700.h" #include <pcmcia/soc_common.h> diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 140a44cb2989..2b7f37172725 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -41,7 +41,7 @@ #include "pxa27x.h" #include "addr-map.h" -#include <mach/hx4700.h> +#include "hx4700.h" #include <linux/platform_data/irda-pxaficp.h> #include <sound/ak4641.h> @@ -834,6 +834,19 @@ static struct i2c_board_info i2c_board_info[] __initdata = { }, }; +static struct gpiod_lookup_table hx4700_audio_gpio_table = { + .dev_id = "hx4700-audio", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO75_HX4700_EARPHONE_nDET, + "earphone-ndet", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO92_HX4700_HP_DRIVER, + "hp-driver", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO107_HX4700_SPK_nSD, + "spk-nsd", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct platform_device audio = { .name = "hx4700-audio", .id = -1, @@ -895,6 +908,7 @@ static void __init hx4700_init(void) gpiod_add_lookup_table(&bq24022_gpiod_table); gpiod_add_lookup_table(&gpio_vbus_gpiod_table); + gpiod_add_lookup_table(&hx4700_audio_gpio_table); platform_add_devices(devices, ARRAY_SIZE(devices)); pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup)); diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/hx4700.h similarity index 99% rename from arch/arm/mach-pxa/include/mach/hx4700.h rename to arch/arm/mach-pxa/hx4700.h index 0c30e6d9c660..ce2db33989e1 100644 --- a/arch/arm/mach-pxa/include/mach/hx4700.h +++ b/arch/arm/mach-pxa/hx4700.h @@ -10,7 +10,7 @@ #include <linux/gpio.h> #include <linux/mfd/asic3.h> -#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */ +#include <mach/irqs.h> /* PXA_NR_BUILTIN_GPIO */ #define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO #define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS) diff --git a/sound/soc/pxa/hx4700.c b/sound/soc/pxa/hx4700.c index 7334fac758de..e70dc38d9892 100644 --- a/sound/soc/pxa/hx4700.c +++ b/sound/soc/pxa/hx4700.c @@ -10,7 +10,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/delay.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <sound/core.h> #include <sound/jack.h> @@ -18,10 +18,10 @@ #include <sound/pcm_params.h> #include <sound/soc.h> -#include <mach/hx4700.h> #include <asm/mach-types.h> #include "pxa2xx-i2s.h" +static struct gpio_desc *gpiod_hp_driver, *gpiod_spk_nsd; static struct snd_soc_jack hs_jack; /* Headphones jack detection DAPM pin */ @@ -40,9 +40,8 @@ static struct snd_soc_jack_pin hs_jack_pin[] = { /* Headphones jack detection GPIO */ static struct snd_soc_jack_gpio hs_jack_gpio = { - .gpio = GPIO75_HX4700_EARPHONE_nDET, .invert = true, - .name = "hp-gpio", + .name = "earphone-ndet", .report = SND_JACK_HEADPHONE, .debounce_time = 200, }; @@ -81,14 +80,14 @@ static const struct snd_soc_ops hx4700_ops = { static int hx4700_spk_power(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - gpio_set_value(GPIO107_HX4700_SPK_nSD, !!SND_SOC_DAPM_EVENT_ON(event)); + gpiod_set_value(gpiod_spk_nsd, !!SND_SOC_DAPM_EVENT_ON(event)); return 0; } static int hx4700_hp_power(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - gpio_set_value(GPIO92_HX4700_HP_DRIVER, !!SND_SOC_DAPM_EVENT_ON(event)); + gpiod_set_value(gpiod_hp_driver, !!SND_SOC_DAPM_EVENT_ON(event)); return 0; } @@ -162,11 +161,6 @@ static struct snd_soc_card snd_soc_card_hx4700 = { .fully_routed = true, }; -static struct gpio hx4700_audio_gpios[] = { - { GPIO107_HX4700_SPK_nSD, GPIOF_OUT_INIT_HIGH, "SPK_POWER" }, - { GPIO92_HX4700_HP_DRIVER, GPIOF_OUT_INIT_LOW, "EP_POWER" }, -}; - static int hx4700_audio_probe(struct platform_device *pdev) { int ret; @@ -174,26 +168,26 @@ static int hx4700_audio_probe(struct platform_device *pdev) if (!machine_is_h4700()) return -ENODEV; - ret = gpio_request_array(hx4700_audio_gpios, - ARRAY_SIZE(hx4700_audio_gpios)); + gpiod_hp_driver = devm_gpiod_get(&pdev->dev, "hp-driver", GPIOD_OUT_HIGH); + ret = PTR_ERR_OR_ZERO(gpiod_hp_driver); + if (ret) + return ret; + gpiod_spk_nsd = devm_gpiod_get(&pdev->dev, "spk-nsd", GPIOD_OUT_HIGH); + ret = PTR_ERR_OR_ZERO(gpiod_spk_nsd); if (ret) return ret; + hs_jack_gpio.gpiod_dev = &pdev->dev; snd_soc_card_hx4700.dev = &pdev->dev; ret = devm_snd_soc_register_card(&pdev->dev, &snd_soc_card_hx4700); - if (ret) - gpio_free_array(hx4700_audio_gpios, - ARRAY_SIZE(hx4700_audio_gpios)); return ret; } static int hx4700_audio_remove(struct platform_device *pdev) { - gpio_set_value(GPIO92_HX4700_HP_DRIVER, 0); - gpio_set_value(GPIO107_HX4700_SPK_nSD, 0); - - gpio_free_array(hx4700_audio_gpios, ARRAY_SIZE(hx4700_audio_gpios)); + gpiod_set_value(gpiod_hp_driver, 0); + gpiod_set_value(gpiod_spk_nsd, 0); return 0; }