diff mbox series

[v4,2/3] mm: rmap: Fix CONT-PTE/PMD size hugetlb issue when migration

Message ID a4baca670aca637e7198d9ae4543b8873cb224dc.1652270205.git.baolin.wang@linux.alibaba.com (mailing list archive)
State Not Applicable
Headers show
Series Fix CONT-PTE/PMD size hugetlb issue when unmapping or migrating | expand

Commit Message

Baolin Wang May 11, 2022, 12:04 p.m. UTC 
On some architectures (like ARM64), it can support CONT-PTE/PMD size
hugetlb, which means it can support not only PMD/PUD size hugetlb:
2M and 1G, but also CONT-PTE/PMD size: 64K and 32M if a 4K page
size specified.

When migrating a hugetlb page, we will get the relevant page table
entry by huge_pte_offset() only once to nuke it and remap it with
a migration pte entry. This is correct for PMD or PUD size hugetlb,
since they always contain only one pmd entry or pud entry in the
page table.

However this is incorrect for CONT-PTE and CONT-PMD size hugetlb,
since they can contain several continuous pte or pmd entry with
same page table attributes. So we will nuke or remap only one pte
or pmd entry for this CONT-PTE/PMD size hugetlb page, which is
not expected for hugetlb migration. The problem is we can still
continue to modify the subpages' data of a hugetlb page during
migrating a hugetlb page, which can cause a serious data consistent
issue, since we did not nuke the page table entry and set a
migration pte for the subpages of a hugetlb page.

To fix this issue, we should change to use huge_ptep_clear_flush()
to nuke a hugetlb page table, and remap it with set_huge_pte_at()
and set_huge_swap_pte_at() when migrating a hugetlb page, which
already considered the CONT-PTE or CONT-PMD size hugetlb.

Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
---
 include/linux/hugetlb.h | 11 +++++++++++
 mm/rmap.c               | 24 ++++++++++++++++++------
 2 files changed, 29 insertions(+), 6 deletions(-)

Comments

David Hildenbrand May 11, 2022, 5:27 p.m. UTC | #1 
On 11.05.22 14:04, Baolin Wang wrote:
> On some architectures (like ARM64), it can support CONT-PTE/PMD size
> hugetlb, which means it can support not only PMD/PUD size hugetlb:
> 2M and 1G, but also CONT-PTE/PMD size: 64K and 32M if a 4K page
> size specified.
> 
> When migrating a hugetlb page, we will get the relevant page table
> entry by huge_pte_offset() only once to nuke it and remap it with
> a migration pte entry. This is correct for PMD or PUD size hugetlb,
> since they always contain only one pmd entry or pud entry in the
> page table.
> 
> However this is incorrect for CONT-PTE and CONT-PMD size hugetlb,
> since they can contain several continuous pte or pmd entry with
> same page table attributes. So we will nuke or remap only one pte
> or pmd entry for this CONT-PTE/PMD size hugetlb page, which is
> not expected for hugetlb migration. The problem is we can still
> continue to modify the subpages' data of a hugetlb page during
> migrating a hugetlb page, which can cause a serious data consistent
> issue, since we did not nuke the page table entry and set a
> migration pte for the subpages of a hugetlb page.
> 
> To fix this issue, we should change to use huge_ptep_clear_flush()
> to nuke a hugetlb page table, and remap it with set_huge_pte_at()
> and set_huge_swap_pte_at() when migrating a hugetlb page, which
> already considered the CONT-PTE or CONT-PMD size hugetlb.
> 
> Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
> Reviewed-by: Muchun Song <songmuchun@bytedance.com>
> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>

Makes sense to me.

Acked-by: David Hildenbrand <david@redhat.com>
diff mbox series

Patch

diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 306d6ef..abde66e 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -1093,6 +1093,17 @@  static inline void set_huge_swap_pte_at(struct mm_struct *mm, unsigned long addr
 					pte_t *ptep, pte_t pte, unsigned long sz)
 {
 }
+
+static inline pte_t huge_ptep_clear_flush(struct vm_area_struct *vma,
+					  unsigned long addr, pte_t *ptep)
+{
+	return *ptep;
+}
+
+static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+				   pte_t *ptep, pte_t pte)
+{
+}
 #endif	/* CONFIG_HUGETLB_PAGE */
 
 static inline spinlock_t *huge_pte_lock(struct hstate *h,
diff --git a/mm/rmap.c b/mm/rmap.c
index 94d6b24..4e96daf 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -1926,13 +1926,15 @@  static bool try_to_migrate_one(struct folio *folio, struct vm_area_struct *vma,
 					break;
 				}
 			}
+
+			/* Nuke the hugetlb page table entry */
+			pteval = huge_ptep_clear_flush(vma, address, pvmw.pte);
 		} else {
 			flush_cache_page(vma, address, pte_pfn(*pvmw.pte));
+			/* Nuke the page table entry. */
+			pteval = ptep_clear_flush(vma, address, pvmw.pte);
 		}
 
-		/* Nuke the page table entry. */
-		pteval = ptep_clear_flush(vma, address, pvmw.pte);
-
 		/* Set the dirty flag on the folio now the pte is gone. */
 		if (pte_dirty(pteval))
 			folio_mark_dirty(folio);
@@ -2017,7 +2019,10 @@  static bool try_to_migrate_one(struct folio *folio, struct vm_area_struct *vma,
 			pte_t swp_pte;
 
 			if (arch_unmap_one(mm, vma, address, pteval) < 0) {
-				set_pte_at(mm, address, pvmw.pte, pteval);
+				if (folio_test_hugetlb(folio))
+					set_huge_pte_at(mm, address, pvmw.pte, pteval);
+				else
+					set_pte_at(mm, address, pvmw.pte, pteval);
 				ret = false;
 				page_vma_mapped_walk_done(&pvmw);
 				break;
@@ -2026,7 +2031,10 @@  static bool try_to_migrate_one(struct folio *folio, struct vm_area_struct *vma,
 				       !anon_exclusive, subpage);
 			if (anon_exclusive &&
 			    page_try_share_anon_rmap(subpage)) {
-				set_pte_at(mm, address, pvmw.pte, pteval);
+				if (folio_test_hugetlb(folio))
+					set_huge_pte_at(mm, address, pvmw.pte, pteval);
+				else
+					set_pte_at(mm, address, pvmw.pte, pteval);
 				ret = false;
 				page_vma_mapped_walk_done(&pvmw);
 				break;
@@ -2052,7 +2060,11 @@  static bool try_to_migrate_one(struct folio *folio, struct vm_area_struct *vma,
 				swp_pte = pte_swp_mksoft_dirty(swp_pte);
 			if (pte_uffd_wp(pteval))
 				swp_pte = pte_swp_mkuffd_wp(swp_pte);
-			set_pte_at(mm, address, pvmw.pte, swp_pte);
+			if (folio_test_hugetlb(folio))
+				set_huge_swap_pte_at(mm, address, pvmw.pte,
+						     swp_pte, vma_mmu_pagesize(vma));
+			else
+				set_pte_at(mm, address, pvmw.pte, swp_pte);
 			trace_set_migration_pte(address, pte_val(swp_pte),
 						compound_order(&folio->page));
 			/*