mbox series

[0/6] ARM: dts: aspeed: bletchley: update dts file base on DVT schematic

Message ID 20220509151118.4899-1-potin.lai.pt@gmail.com (mailing list archive)
Headers show
Series ARM: dts: aspeed: bletchley: update dts file base on DVT schematic | expand

Message

Potin Lai May 9, 2022, 3:11 p.m. UTC 
This patch series update Facebook Bletchley BMC devicetree base on DVT
schematic.

- EHCI: enable ehci0 for detecting and accessing usb device on sled
- MDIO Bus: enable mdio0 for accessing switch registers
- SPI2 Flash: switch spi driver back to aspeed-smc to improve performance
- EEPROM: add eeprom node on each sled
- GPIO:
  - add PCA9536 IOEPX node on each sled
  - update gpio line names

Potin Lai (6):
  ARM: dts: aspeed: bletchley: enable ehci0 device node
  ARM: dts: aspeed: bletchley: switch spi2 driver to aspeed-smc
  ARM: dts: aspeed: bletchley: Enable mdio0 bus
  ARM: dts: aspeed: bletchley: update gpio0 line names
  ARM: dts: aspeed: bletchley: add pca9536 node on each sled
  ARM: dts: aspeed: bletchley: add eeprom node on each sled

 .../dts/aspeed-bmc-facebook-bletchley.dts     | 180 ++++++++++++++----
 1 file changed, 145 insertions(+), 35 deletions(-)

Comments

Joel Stanley May 11, 2022, 6:09 a.m. UTC | #1 
On Mon, 9 May 2022 at 15:14, Potin Lai <potin.lai.pt@gmail.com> wrote:
>
> This patch series update Facebook Bletchley BMC devicetree base on DVT
> schematic.
>
> - EHCI: enable ehci0 for detecting and accessing usb device on sled
> - MDIO Bus: enable mdio0 for accessing switch registers
> - SPI2 Flash: switch spi driver back to aspeed-smc to improve performance
> - EEPROM: add eeprom node on each sled
> - GPIO:
>   - add PCA9536 IOEPX node on each sled
>   - update gpio line names

These look fine to me.

Reviewed-by: Joel Stanley <joel@jms.id.au>

Patrick, did you want to review them before I merge?

>
> Potin Lai (6):
>   ARM: dts: aspeed: bletchley: enable ehci0 device node
>   ARM: dts: aspeed: bletchley: switch spi2 driver to aspeed-smc
>   ARM: dts: aspeed: bletchley: Enable mdio0 bus
>   ARM: dts: aspeed: bletchley: update gpio0 line names
>   ARM: dts: aspeed: bletchley: add pca9536 node on each sled
>   ARM: dts: aspeed: bletchley: add eeprom node on each sled
>
>  .../dts/aspeed-bmc-facebook-bletchley.dts     | 180 ++++++++++++++----
>  1 file changed, 145 insertions(+), 35 deletions(-)
>
> --
> 2.17.1
>
Patrick Williams May 11, 2022, 7:15 p.m. UTC | #2 
On Wed, May 11, 2022 at 06:09:33AM +0000, Joel Stanley wrote:
> On Mon, 9 May 2022 at 15:14, Potin Lai <potin.lai.pt@gmail.com> wrote:
> >
> > This patch series update Facebook Bletchley BMC devicetree base on DVT
> > schematic.
> >
> > - EHCI: enable ehci0 for detecting and accessing usb device on sled
> > - MDIO Bus: enable mdio0 for accessing switch registers
> > - SPI2 Flash: switch spi driver back to aspeed-smc to improve performance
> > - EEPROM: add eeprom node on each sled
> > - GPIO:
> >   - add PCA9536 IOEPX node on each sled
> >   - update gpio line names
> 
> These look fine to me.
> 
> Reviewed-by: Joel Stanley <joel@jms.id.au>
> 
> Patrick, did you want to review them before I merge?

Yes, also...

Reviewed-by: Patrick Williams <patrick@stwcx.xyz>