| Message ID | 20220517190949.2922197-1-swboyd@chromium.org (mailing list archive) |
|---|---|
| State | Awaiting Upstream, archived |
| Headers | show |
| Series | clk: qcom: rpmh: Add note about sleep/wake state for BCMs | expand |
On 5/17/22 2:09 PM, Stephen Boyd wrote: > The sleep/wake state doesn't need to be set here because of specific > RPMh behavior that carries over the active state when sleep/wake state > hasn't been modified. Add a note to the code so we aren't tempted to set > the sleep/wake states. > > Cc: Alex Elder <elder@linaro.org> > Cc: Taniya Das <quic_tdas@quicinc.com> > Signed-off-by: Stephen Boyd <swboyd@chromium.org> Looks good to me. Thanks Stephen. Reviewed-by: Alex Elder <elder@linaro.org> > --- > > This superseedes a previous patch[1] I sent that tried to fix this. > > drivers/clk/qcom/clk-rpmh.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c > index aed907982344..c07cab6905cb 100644 > --- a/drivers/clk/qcom/clk-rpmh.c > +++ b/drivers/clk/qcom/clk-rpmh.c > @@ -274,6 +274,11 @@ static int clk_rpmh_bcm_send_cmd(struct clk_rpmh *c, bool enable) > cmd.addr = c->res_addr; > cmd.data = BCM_TCS_CMD(1, enable, 0, cmd_state); > > + /* > + * Send only an active only state request. RPMh continues to > + * use the active state when we're in sleep/wake state as long > + * as the sleep/wake state has never been set. > + */ > ret = clk_rpmh_send(c, RPMH_ACTIVE_ONLY_STATE, &cmd, enable); > if (ret) { > dev_err(c->dev, "set active state of %s failed: (%d)\n", > > base-commit: 42226c989789d8da4af1de0c31070c96726d990c
On 5/17/22 2:16 PM, Alex Elder wrote: > On 5/17/22 2:09 PM, Stephen Boyd wrote: >> The sleep/wake state doesn't need to be set here because of specific >> RPMh behavior that carries over the active state when sleep/wake state >> hasn't been modified. Add a note to the code so we aren't tempted to set >> the sleep/wake states. >> >> Cc: Alex Elder <elder@linaro.org> >> Cc: Taniya Das <quic_tdas@quicinc.com> >> Signed-off-by: Stephen Boyd <swboyd@chromium.org> > > Looks good to me. Thanks Stephen. > > Reviewed-by: Alex Elder <elder@linaro.org> Taniya, do you have anything to say about this patch? -Alex > >> --- >> >> This superseedes a previous patch[1] I sent that tried to fix this. >> >> drivers/clk/qcom/clk-rpmh.c | 5 +++++ >> 1 file changed, 5 insertions(+) >> >> diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c >> index aed907982344..c07cab6905cb 100644 >> --- a/drivers/clk/qcom/clk-rpmh.c >> +++ b/drivers/clk/qcom/clk-rpmh.c >> @@ -274,6 +274,11 @@ static int clk_rpmh_bcm_send_cmd(struct clk_rpmh >> *c, bool enable) >> cmd.addr = c->res_addr; >> cmd.data = BCM_TCS_CMD(1, enable, 0, cmd_state); >> + /* >> + * Send only an active only state request. RPMh continues to >> + * use the active state when we're in sleep/wake state as long >> + * as the sleep/wake state has never been set. >> + */ >> ret = clk_rpmh_send(c, RPMH_ACTIVE_ONLY_STATE, &cmd, enable); >> if (ret) { >> dev_err(c->dev, "set active state of %s failed: (%d)\n", >> >> base-commit: 42226c989789d8da4af1de0c31070c96726d990c >
On Tue 17 May 14:09 CDT 2022, Stephen Boyd wrote: > The sleep/wake state doesn't need to be set here because of specific > RPMh behavior that carries over the active state when sleep/wake state > hasn't been modified. Add a note to the code so we aren't tempted to set > the sleep/wake states. > > Cc: Alex Elder <elder@linaro.org> > Cc: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Signed-off-by: Stephen Boyd <swboyd@chromium.org> > --- > > This superseedes a previous patch[1] I sent that tried to fix this. > > drivers/clk/qcom/clk-rpmh.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c > index aed907982344..c07cab6905cb 100644 > --- a/drivers/clk/qcom/clk-rpmh.c > +++ b/drivers/clk/qcom/clk-rpmh.c > @@ -274,6 +274,11 @@ static int clk_rpmh_bcm_send_cmd(struct clk_rpmh *c, bool enable) > cmd.addr = c->res_addr; > cmd.data = BCM_TCS_CMD(1, enable, 0, cmd_state); > > + /* > + * Send only an active only state request. RPMh continues to > + * use the active state when we're in sleep/wake state as long > + * as the sleep/wake state has never been set. > + */ > ret = clk_rpmh_send(c, RPMH_ACTIVE_ONLY_STATE, &cmd, enable); > if (ret) { > dev_err(c->dev, "set active state of %s failed: (%d)\n", > > base-commit: 42226c989789d8da4af1de0c31070c96726d990c > -- > https://chromeos.dev > [1] https://lore.kernel.org/r/20220412194505.614002-1-swboyd@chromium.org
On Tue, 17 May 2022 12:09:49 -0700, Stephen Boyd wrote: > The sleep/wake state doesn't need to be set here because of specific > RPMh behavior that carries over the active state when sleep/wake state > hasn't been modified. Add a note to the code so we aren't tempted to set > the sleep/wake states. > > Applied, thanks! [1/1] clk: qcom: rpmh: Add note about sleep/wake state for BCMs commit: 29f66b625281a3026653fd33b710771a4ae394d2 Best regards,
diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c index aed907982344..c07cab6905cb 100644 --- a/drivers/clk/qcom/clk-rpmh.c +++ b/drivers/clk/qcom/clk-rpmh.c @@ -274,6 +274,11 @@ static int clk_rpmh_bcm_send_cmd(struct clk_rpmh *c, bool enable) cmd.addr = c->res_addr; cmd.data = BCM_TCS_CMD(1, enable, 0, cmd_state); + /* + * Send only an active only state request. RPMh continues to + * use the active state when we're in sleep/wake state as long + * as the sleep/wake state has never been set. + */ ret = clk_rpmh_send(c, RPMH_ACTIVE_ONLY_STATE, &cmd, enable); if (ret) { dev_err(c->dev, "set active state of %s failed: (%d)\n",
The sleep/wake state doesn't need to be set here because of specific RPMh behavior that carries over the active state when sleep/wake state hasn't been modified. Add a note to the code so we aren't tempted to set the sleep/wake states. Cc: Alex Elder <elder@linaro.org> Cc: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> --- This superseedes a previous patch[1] I sent that tried to fix this. drivers/clk/qcom/clk-rpmh.c | 5 +++++ 1 file changed, 5 insertions(+) base-commit: 42226c989789d8da4af1de0c31070c96726d990c