| Message ID | 6535f2dd-aa2e-21b4-8ac4-7762521f16fc@linaro.org (mailing list archive) |
|---|---|
| State | Mainlined, archived |
| Headers | show |
| Series | [GIT,PULL] thermal for v5.19-rc1 | expand |
On Thu, May 19, 2022 at 2:53 PM Daniel Lezcano <daniel.lezcano@linaro.org> wrote: > > > Hi Rafael, > > please consider pulling: > > The following changes since commit 7b145802ba545ecf9446ce6d67d6011b73dac0e0: > > thermal: int340x: Mode setting with new OS handshake (2022-05-11 > 20:08:15 +0200) > > are available in the Git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git > tags/thermal-v5.19-rc1 > > for you to fetch changes up to ffcb2fc86eb7ebc9f5524525fb57e1cccfbd1fc0: > > thermal: k3_j72xx_bandgap: Add the bandgap driver support (2022-05-19 > 12:11:53 +0200) > > ---------------------------------------------------------------- > - Add the new k3 j72xx bangdap driver and the corresponding bindings > (Keerthy) > > - Fix the missing of_node_put() in the SC iMX driver at probe timer > (Miaoqian Lin) > > - Fix memory leak in __thermal_cooling_device_register() when > device_register() > fails by calling thermal_cooling_device_destroy_sysfs() (Yang Yingliang) > > - Add sc8180x and sc8280xp compatible string in the DT bindings and lMH > support > for QCom tsens driver (Bjorn Andersson) > > - Fix OTP Calibration Register values conforming to the documentation on > RZ/G2L > and bindings documentation for RZ/G2UL (Biju Das) > > - Fix type in kerneldoc description for __thermal_bind_params (Corentin > Labbe) > > - Remove unneeded semi colon in libthermal and tools thermal as reported by > cocci (Jiapeng Chong) > > - Fix potential NULL dereference in sr_thermal_probe() on Broadcom platform > (Zheng Yongjun) > > - Add thermal library and thermal tools to encapsulate the netlink into > event > based callbacks (Daniel Lezcano) > > - Add change mode ops for the thermal-of sensor (Manaf Meethalavalappu > Pallikunhi) > > - Fix non negative value support by preventing the value to be clamp to zero > (Stefan Wahren) > > - Add compatible string and DT bindings for MSM8960 tsens driver (Dmitry > Baryshkov) > > - Add hwmon support for K3 driver (Massimiliano Minella) > > - Refactor and add multiple generations support for QCom ADC driver (Jishnu > Prakash) > > - Use platform_get_irq_optional() to get the interrupt on RCar driver and > document Document RZ/V2L bindings (Lad Prabhakar) > > ---------------------------------------------------------------- > Biju Das (2): > dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings > thermal/drivers/rz2gl: Fix OTP Calibration Register values > > Bjorn Andersson (3): > thermal/drivers/qcom/lmh: Add sc8180x compatible > dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible > dt-bindings: thermal: tsens: Add sc8280xp compatible > > Corentin Labbe (1): > thermal: thermal_of: fix typo on __thermal_bind_params > > Daniel Lezcano (4): > tools/lib/thermal: Add a thermal library > tools/thermal: Add util library > tools/thermal: Add a temperature capture tool > tools/thermal: Add thermal daemon skeleton > > Dmitry Baryshkov (2): > dt-bindings: thermal: qcom-tsens.yaml: add msm8960 compat string > thermal/drivers/tsens: Add compat string for the qcom,msm8960 > > Jiapeng Chong (2): > tools/lib/thermal: remove unneeded semicolon > tools/thermal: remove unneeded semicolon > > Jishnu Prakash (4): > dt-bindings: thermal: qcom: add PMIC5 Gen2 ADC_TM bindings > iio: adc: qcom-vadc-common: add reverse scaling for PMIC5 Gen2 ADC_TM > thermal/drivers/qcom: Add support for multiple generations of devices > thermal/drivers/qcom: Add support for PMIC5 Gen2 ADCTM > > Keerthy (2): > dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation > thermal: k3_j72xx_bandgap: Add the bandgap driver support > > Lad Prabhakar (2): > dt-bindings: thermal: rzg2l-thermal: Document RZ/V2L bindings > thermal/drivers/rcar_thermal: Use platform_get_irq_optional() to > get the interrupt > > Manaf Meethalavalappu Pallikunhi (1): > thermal/drivers/thermal_of: Add change_mode ops support for > thermal_of sensor > > Massimiliano Minella (1): > thermal/drivers/k3: Add hwmon support > > Miaoqian Lin (1): > thermal/drivers/imx_sc_thermal: Fix refcount leak in > imx_sc_thermal_probe > > Stefan Wahren (1): > thermal/drivers/bcm2711: Don't clamp temperature at zero > > Yang Yingliang (1): > thermal/core: Fix memory leak in __thermal_cooling_device_register() > > Zheng Yongjun (1): > thermal/drivers/broadcom: Fix potential NULL dereference in > sr_thermal_probe > > .../devicetree/bindings/thermal/qcom-lmh.yaml | 1 + > .../bindings/thermal/qcom-spmi-adc-tm5.yaml | 110 +++- > .../devicetree/bindings/thermal/qcom-tsens.yaml | 5 +- > .../devicetree/bindings/thermal/rzg2l-thermal.yaml | 2 + > .../bindings/thermal/ti,j72xx-thermal.yaml | 63 +++ > MAINTAINERS | 1 + > drivers/iio/adc/qcom-vadc-common.c | 11 + > drivers/thermal/Makefile | 2 +- > drivers/thermal/broadcom/bcm2711_thermal.c | 5 +- > drivers/thermal/broadcom/sr-thermal.c | 3 + > drivers/thermal/imx_sc_thermal.c | 6 +- > drivers/thermal/k3_bandgap.c | 5 + > drivers/thermal/k3_j72xx_bandgap.c | 566 > ++++++++++++++++++++ > drivers/thermal/qcom/lmh.c | 1 + > drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 486 +++++++++++++++-- > drivers/thermal/qcom/tsens.c | 3 + > drivers/thermal/rcar_thermal.c | 17 +- > drivers/thermal/rzg2l_thermal.c | 10 +- > drivers/thermal/thermal_core.c | 1 + > drivers/thermal/thermal_of.c | 14 +- > include/linux/iio/adc/qcom-vadc-common.h | 2 + > include/linux/thermal.h | 3 + > tools/Makefile | 36 +- > tools/lib/thermal/.gitignore | 2 + > tools/lib/thermal/Build | 5 + > tools/lib/thermal/Makefile | 165 ++++++ > tools/lib/thermal/commands.c | 349 +++++++++++++ > tools/lib/thermal/events.c | 164 ++++++ > tools/lib/thermal/include/thermal.h | 142 +++++ > tools/lib/thermal/libthermal.map | 25 + > tools/lib/thermal/libthermal.pc.template | 12 + > tools/lib/thermal/sampling.c | 75 +++ > tools/lib/thermal/thermal.c | 135 +++++ > tools/lib/thermal/thermal_nl.c | 215 ++++++++ > tools/lib/thermal/thermal_nl.h | 46 ++ > tools/thermal/lib/Build | 3 + > tools/thermal/lib/Makefile | 158 ++++++ > tools/thermal/lib/libthermal_tools.pc.template | 12 + > tools/thermal/lib/log.c | 77 +++ > tools/thermal/lib/log.h | 31 ++ > tools/thermal/lib/mainloop.c | 120 +++++ > tools/thermal/lib/mainloop.h | 15 + > tools/thermal/lib/thermal-tools.h | 10 + > tools/thermal/lib/uptimeofday.c | 40 ++ > tools/thermal/lib/uptimeofday.h | 12 + > tools/thermal/thermal-engine/Build | 1 + > tools/thermal/thermal-engine/Makefile | 28 + > tools/thermal/thermal-engine/thermal-engine.c | 341 ++++++++++++ > tools/thermal/thermometer/Build | 1 + > tools/thermal/thermometer/Makefile | 26 + > tools/thermal/thermometer/thermometer.8 | 92 ++++ > tools/thermal/thermometer/thermometer.c | 572 > +++++++++++++++++++++ > tools/thermal/thermometer/thermometer.conf | 5 + > 53 files changed, 4173 insertions(+), 59 deletions(-) > create mode 100644 > Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml > create mode 100644 drivers/thermal/k3_j72xx_bandgap.c > create mode 100644 tools/lib/thermal/.gitignore > create mode 100644 tools/lib/thermal/Build > create mode 100644 tools/lib/thermal/Makefile > create mode 100644 tools/lib/thermal/commands.c > create mode 100644 tools/lib/thermal/events.c > create mode 100644 tools/lib/thermal/include/thermal.h > create mode 100644 tools/lib/thermal/libthermal.map > create mode 100644 tools/lib/thermal/libthermal.pc.template > create mode 100644 tools/lib/thermal/sampling.c > create mode 100644 tools/lib/thermal/thermal.c > create mode 100644 tools/lib/thermal/thermal_nl.c > create mode 100644 tools/lib/thermal/thermal_nl.h > create mode 100644 tools/thermal/lib/Build > create mode 100644 tools/thermal/lib/Makefile > create mode 100644 tools/thermal/lib/libthermal_tools.pc.template > create mode 100644 tools/thermal/lib/log.c > create mode 100644 tools/thermal/lib/log.h > create mode 100644 tools/thermal/lib/mainloop.c > create mode 100644 tools/thermal/lib/mainloop.h > create mode 100644 tools/thermal/lib/thermal-tools.h > create mode 100644 tools/thermal/lib/uptimeofday.c > create mode 100644 tools/thermal/lib/uptimeofday.h > create mode 100644 tools/thermal/thermal-engine/Build > create mode 100644 tools/thermal/thermal-engine/Makefile > create mode 100644 tools/thermal/thermal-engine/thermal-engine.c > create mode 100644 tools/thermal/thermometer/Build > create mode 100644 tools/thermal/thermometer/Makefile > create mode 100644 tools/thermal/thermometer/thermometer.8 > create mode 100644 tools/thermal/thermometer/thermometer.c > create mode 100644 tools/thermal/thermometer/thermometer.conf Pulled and pushed out, thanks!
Hi Rafael, please consider pulling: The following changes since commit 7b145802ba545ecf9446ce6d67d6011b73dac0e0: thermal: int340x: Mode setting with new OS handshake (2022-05-11 20:08:15 +0200) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git tags/thermal-v5.19-rc1 for you to fetch changes up to ffcb2fc86eb7ebc9f5524525fb57e1cccfbd1fc0: thermal: k3_j72xx_bandgap: Add the bandgap driver support (2022-05-19 12:11:53 +0200) ---------------------------------------------------------------- - Add the new k3 j72xx bangdap driver and the corresponding bindings (Keerthy) - Fix the missing of_node_put() in the SC iMX driver at probe timer (Miaoqian Lin) - Fix memory leak in __thermal_cooling_device_register() when device_register() fails by calling thermal_cooling_device_destroy_sysfs() (Yang Yingliang) - Add sc8180x and sc8280xp compatible string in the DT bindings and lMH support for QCom tsens driver (Bjorn Andersson) - Fix OTP Calibration Register values conforming to the documentation on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das) - Fix type in kerneldoc description for __thermal_bind_params (Corentin Labbe) - Remove unneeded semi colon in libthermal and tools thermal as reported by cocci (Jiapeng Chong) - Fix potential NULL dereference in sr_thermal_probe() on Broadcom platform (Zheng Yongjun) - Add thermal library and thermal tools to encapsulate the netlink into event based callbacks (Daniel Lezcano) - Add change mode ops for the thermal-of sensor (Manaf Meethalavalappu Pallikunhi) - Fix non negative value support by preventing the value to be clamp to zero (Stefan Wahren) - Add compatible string and DT bindings for MSM8960 tsens driver (Dmitry Baryshkov) - Add hwmon support for K3 driver (Massimiliano Minella) - Refactor and add multiple generations support for QCom ADC driver (Jishnu Prakash) - Use platform_get_irq_optional() to get the interrupt on RCar driver and document Document RZ/V2L bindings (Lad Prabhakar) ---------------------------------------------------------------- Biju Das (2): dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings thermal/drivers/rz2gl: Fix OTP Calibration Register values Bjorn Andersson (3): thermal/drivers/qcom/lmh: Add sc8180x compatible dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible dt-bindings: thermal: tsens: Add sc8280xp compatible Corentin Labbe (1): thermal: thermal_of: fix typo on __thermal_bind_params Daniel Lezcano (4): tools/lib/thermal: Add a thermal library tools/thermal: Add util library tools/thermal: Add a temperature capture tool tools/thermal: Add thermal daemon skeleton Dmitry Baryshkov (2): dt-bindings: thermal: qcom-tsens.yaml: add msm8960 compat string thermal/drivers/tsens: Add compat string for the qcom,msm8960 Jiapeng Chong (2): tools/lib/thermal: remove unneeded semicolon tools/thermal: remove unneeded semicolon Jishnu Prakash (4): dt-bindings: thermal: qcom: add PMIC5 Gen2 ADC_TM bindings iio: adc: qcom-vadc-common: add reverse scaling for PMIC5 Gen2 ADC_TM thermal/drivers/qcom: Add support for multiple generations of devices thermal/drivers/qcom: Add support for PMIC5 Gen2 ADCTM Keerthy (2): dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation thermal: k3_j72xx_bandgap: Add the bandgap driver support Lad Prabhakar (2): dt-bindings: thermal: rzg2l-thermal: Document RZ/V2L bindings thermal/drivers/rcar_thermal: Use platform_get_irq_optional() to get the interrupt Manaf Meethalavalappu Pallikunhi (1): thermal/drivers/thermal_of: Add change_mode ops support for thermal_of sensor Massimiliano Minella (1): thermal/drivers/k3: Add hwmon support Miaoqian Lin (1): thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe Stefan Wahren (1): thermal/drivers/bcm2711: Don't clamp temperature at zero Yang Yingliang (1): thermal/core: Fix memory leak in __thermal_cooling_device_register() Zheng Yongjun (1): thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe .../devicetree/bindings/thermal/qcom-lmh.yaml | 1 + .../bindings/thermal/qcom-spmi-adc-tm5.yaml | 110 +++- .../devicetree/bindings/thermal/qcom-tsens.yaml | 5 +- .../devicetree/bindings/thermal/rzg2l-thermal.yaml | 2 + .../bindings/thermal/ti,j72xx-thermal.yaml | 63 +++ MAINTAINERS | 1 + drivers/iio/adc/qcom-vadc-common.c | 11 + drivers/thermal/Makefile | 2 +- drivers/thermal/broadcom/bcm2711_thermal.c | 5 +- drivers/thermal/broadcom/sr-thermal.c | 3 + drivers/thermal/imx_sc_thermal.c | 6 +- drivers/thermal/k3_bandgap.c | 5 + drivers/thermal/k3_j72xx_bandgap.c | 566 ++++++++++++++++++++ drivers/thermal/qcom/lmh.c | 1 + drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 486 +++++++++++++++-- drivers/thermal/qcom/tsens.c | 3 + drivers/thermal/rcar_thermal.c | 17 +- drivers/thermal/rzg2l_thermal.c | 10 +- drivers/thermal/thermal_core.c | 1 + drivers/thermal/thermal_of.c | 14 +- include/linux/iio/adc/qcom-vadc-common.h | 2 + include/linux/thermal.h | 3 + tools/Makefile | 36 +- tools/lib/thermal/.gitignore | 2 + tools/lib/thermal/Build | 5 + tools/lib/thermal/Makefile | 165 ++++++ tools/lib/thermal/commands.c | 349 +++++++++++++ tools/lib/thermal/events.c | 164 ++++++ tools/lib/thermal/include/thermal.h | 142 +++++ tools/lib/thermal/libthermal.map | 25 + tools/lib/thermal/libthermal.pc.template | 12 + tools/lib/thermal/sampling.c | 75 +++ tools/lib/thermal/thermal.c | 135 +++++ tools/lib/thermal/thermal_nl.c | 215 ++++++++ tools/lib/thermal/thermal_nl.h | 46 ++ tools/thermal/lib/Build | 3 + tools/thermal/lib/Makefile | 158 ++++++ tools/thermal/lib/libthermal_tools.pc.template | 12 + tools/thermal/lib/log.c | 77 +++ tools/thermal/lib/log.h | 31 ++ tools/thermal/lib/mainloop.c | 120 +++++ tools/thermal/lib/mainloop.h | 15 + tools/thermal/lib/thermal-tools.h | 10 + tools/thermal/lib/uptimeofday.c | 40 ++ tools/thermal/lib/uptimeofday.h | 12 + tools/thermal/thermal-engine/Build | 1 + tools/thermal/thermal-engine/Makefile | 28 + tools/thermal/thermal-engine/thermal-engine.c | 341 ++++++++++++ tools/thermal/thermometer/Build | 1 + tools/thermal/thermometer/Makefile | 26 + tools/thermal/thermometer/thermometer.8 | 92 ++++ tools/thermal/thermometer/thermometer.c | 572 +++++++++++++++++++++ tools/thermal/thermometer/thermometer.conf | 5 + 53 files changed, 4173 insertions(+), 59 deletions(-) create mode 100644 Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml create mode 100644 drivers/thermal/k3_j72xx_bandgap.c create mode 100644 tools/lib/thermal/.gitignore create mode 100644 tools/lib/thermal/Build create mode 100644 tools/lib/thermal/Makefile create mode 100644 tools/lib/thermal/commands.c create mode 100644 tools/lib/thermal/events.c create mode 100644 tools/lib/thermal/include/thermal.h create mode 100644 tools/lib/thermal/libthermal.map create mode 100644 tools/lib/thermal/libthermal.pc.template create mode 100644 tools/lib/thermal/sampling.c create mode 100644 tools/lib/thermal/thermal.c create mode 100644 tools/lib/thermal/thermal_nl.c create mode 100644 tools/lib/thermal/thermal_nl.h create mode 100644 tools/thermal/lib/Build create mode 100644 tools/thermal/lib/Makefile create mode 100644 tools/thermal/lib/libthermal_tools.pc.template create mode 100644 tools/thermal/lib/log.c create mode 100644 tools/thermal/lib/log.h create mode 100644 tools/thermal/lib/mainloop.c create mode 100644 tools/thermal/lib/mainloop.h create mode 100644 tools/thermal/lib/thermal-tools.h create mode 100644 tools/thermal/lib/uptimeofday.c create mode 100644 tools/thermal/lib/uptimeofday.h create mode 100644 tools/thermal/thermal-engine/Build create mode 100644 tools/thermal/thermal-engine/Makefile create mode 100644 tools/thermal/thermal-engine/thermal-engine.c create mode 100644 tools/thermal/thermometer/Build create mode 100644 tools/thermal/thermometer/Makefile create mode 100644 tools/thermal/thermometer/thermometer.8 create mode 100644 tools/thermal/thermometer/thermometer.c create mode 100644 tools/thermal/thermometer/thermometer.conf