| Message ID | 20220519111323.14586-2-axe.yang@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | mmc: mediatek: add support for SDIO async IRQ | expand |
On Thu, 19 May 2022 19:13:21 +0800, Axe Yang wrote: > Extend interrupts and pinctrls for SDIO wakeup interrupt feature. > This feature allow SDIO devices alarm asynchronous interrupt to host > even when host stop providing clock to SDIO card. An extra wakeup > interrupt and pinctrl states for SDIO DAT1 pin state switching are > required in this scenario. > > Signed-off-by: Axe Yang <axe.yang@mediatek.com> > --- > .../devicetree/bindings/mmc/mtk-sd.yaml | 53 ++++++++++++++++++- > 1 file changed, 52 insertions(+), 1 deletion(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Error: Documentation/devicetree/bindings/mmc/mtk-sd.example.dts:50.36-37 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [scripts/Makefile.lib:364: Documentation/devicetree/bindings/mmc/mtk-sd.example.dtb] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1401: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Thu, 2022-05-19 at 08:05 -0500, Rob Herring wrote: > On Thu, 19 May 2022 19:13:21 +0800, Axe Yang wrote: > > Extend interrupts and pinctrls for SDIO wakeup interrupt feature. > > This feature allow SDIO devices alarm asynchronous interrupt to > > host > > even when host stop providing clock to SDIO card. An extra wakeup > > interrupt and pinctrl states for SDIO DAT1 pin state switching are > > required in this scenario. > > > > Signed-off-by: Axe Yang <axe.yang@mediatek.com> > > --- > > .../devicetree/bindings/mmc/mtk-sd.yaml | 53 > > ++++++++++++++++++- > > 1 file changed, 52 insertions(+), 1 deletion(-) > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m > dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > Error: Documentation/devicetree/bindings/mmc/mtk- > sd.example.dts:50.36-37 syntax error > FATAL ERROR: Unable to parse input tree > make[1]: *** [scripts/Makefile.lib:364: > Documentation/devicetree/bindings/mmc/mtk-sd.example.dtb] Error 1 > make[1]: *** Waiting for unfinished jobs.... > make: *** [Makefile:1401: dt_binding_check] Error 2 > > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/patch/ > > This check can fail if there are any dependencies. The base for a > patch > series is generally the most recent rc1. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up > to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit. I reproduced the build error, sorry for that. And it has been fixed in v11. Regards, Axe
On Thu, 2022-05-19 at 13:18 +0200, AngeloGioacchino Del Regno wrote: > Il 19/05/22 13:13, Axe Yang ha scritto: > > Extend interrupts and pinctrls for SDIO wakeup interrupt feature. > > This feature allow SDIO devices alarm asynchronous interrupt to > > host > > even when host stop providing clock to SDIO card. An extra wakeup > > interrupt and pinctrl states for SDIO DAT1 pin state switching are > > required in this scenario. > > > > Signed-off-by: Axe Yang <axe.yang@mediatek.com> > > --- > > .../devicetree/bindings/mmc/mtk-sd.yaml | 53 > > ++++++++++++++++++- > > 1 file changed, 52 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml > > b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml > > index 2a2e9fa8c188..b068ab67a054 100644 > > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml > > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml > > @@ -72,12 +72,26 @@ properties: > > - const: ahb_cg > > > > interrupts: > > - maxItems: 1 > > + description: > > + Should at least contain MSDC GIC interrupt. To support SDIO > > in-band wakeup, an extended > > + interrupt is required and be configured as wakeup source > > irq. > > + minItems: 1 > > + maxItems: 2 > > + > > + interrupt-names: > > + items: > > + - const: msdc_irq > > > > That ain't right. You have two interrupts, so you describe two > interrupts: > > interrupt-names: > minItems: 1 > items: > - const: msdc > - const: sdio-wakeup > Fixed in v11. > ...also, I personally don't like the "_irq" suffix: we're specifying > interrupts in > interrupt-names, so it sounds a bit redundant. > > You're free to keep it, if you really like it though. Totally agree with that. The suffix is removed in v11. Regards, Axe
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml index 2a2e9fa8c188..b068ab67a054 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml @@ -72,12 +72,26 @@ properties: - const: ahb_cg interrupts: - maxItems: 1 + description: + Should at least contain MSDC GIC interrupt. To support SDIO in-band wakeup, an extended + interrupt is required and be configured as wakeup source irq. + minItems: 1 + maxItems: 2 + + interrupt-names: + items: + - const: msdc_irq pinctrl-names: + description: + Should at least contain default and state_uhs. To support SDIO in-band wakeup, dat1 pin + will be switched between GPIO mode and SDIO DAT1 mode, state_eint and state_dat1 are + mandatory in this scenarios. + minItems: 2 items: - const: default - const: state_uhs + - const: state_eint pinctrl-0: description: @@ -89,6 +103,11 @@ properties: should contain uhs mode pin ctrl. maxItems: 1 + pinctrl-2: + description: + should switch dat1 pin to GPIO mode. + maxItems: 1 + assigned-clocks: description: PLL of the source clock. @@ -208,4 +227,36 @@ examples: mediatek,hs400-cmd-resp-sel-rising; }; + mmc2: mmc@11250000 { + compatible = "mediatek,mt8195-mmc"; + reg = <0x11250000 0x1000>, + <0x11e60000 0x1000>; + clock-names = "source", "hclk", "source_cg"; + clocks = <&topckgen CLK_TOP_MSDC30_2_SEL>, + <&infracfg_ao CLK_INFRA_AO_MSDC2>, + <&infracfg_ao CLK_INFRA_AO_MSDC30_2>; + interrupt-names = "msdc_irq", "sdio_wakeup_irq"; + interrupts = <&gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>, + <&pio 172 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default", "state_uhs", "state_eint"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_uhs>; + pinctrl-2 = <&mmc2_pins_eint>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_2_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr104; + keep-power-in-suspend; + wakeup-source; + cap-sdio-irq; + no-mmc; + no-sd; + non-removable; + vmmc-supply = <&sdio_fixed_3v3>; + vqmmc-supply = <&sdio_fixed_1v8>; + mmc-pwrseq = <&wifi_pwrseq>; + }; + ...
Extend interrupts and pinctrls for SDIO wakeup interrupt feature. This feature allow SDIO devices alarm asynchronous interrupt to host even when host stop providing clock to SDIO card. An extra wakeup interrupt and pinctrl states for SDIO DAT1 pin state switching are required in this scenario. Signed-off-by: Axe Yang <axe.yang@mediatek.com> --- .../devicetree/bindings/mmc/mtk-sd.yaml | 53 ++++++++++++++++++- 1 file changed, 52 insertions(+), 1 deletion(-)