| Message ID | 20201022174706.8813-2-kholk11@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 864ed874d74a36e9b708e41c98cf791bb7786507 |
| Headers | show |
| Series | Add support for SDM630/660 Camera Subsystem | expand |
On 10/22/20 20:47, kholk11@gmail.com wrote: > From: AngeloGioacchino Del Regno <kholk11@gmail.com> > > Resetting the ISPIF VFE0 context is wrong if we are using the VFE1 > for dual-camera or simply because a secondary camera is connected > to it: in this case the reset will always happen on the VFE0 ctx > of the ISPIF, which is .. useless. > > Fix this usecase by adding the ISPIF_RST_CMD_1 address and choose > where to do the (or what to) reset based on the VFE line id. > > Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> > Reviewed-by: Robert Foss <robert.foss@linaro.org> > --- > .../media/platform/qcom/camss/camss-ispif.c | 85 ++++++++++++------- > .../media/platform/qcom/camss/camss-ispif.h | 2 +- > 2 files changed, 56 insertions(+), 31 deletions(-) > > diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c b/drivers/media/platform/qcom/camss/camss-ispif.c > index db94cfd6c508..754f0d044c38 100644 > --- a/drivers/media/platform/qcom/camss/camss-ispif.c > +++ b/drivers/media/platform/qcom/camss/camss-ispif.c > @@ -26,6 +26,7 @@ > #define MSM_ISPIF_NAME "msm_ispif" > > #define ISPIF_RST_CMD_0 0x008 > +#define ISPIF_RST_CMD_1 0x00c > #define ISPIF_RST_CMD_0_STROBED_RST_EN (1 << 0) > #define ISPIF_RST_CMD_0_MISC_LOGIC_RST (1 << 1) > #define ISPIF_RST_CMD_0_SW_REG_RST (1 << 2) > @@ -179,7 +180,10 @@ static irqreturn_t ispif_isr_8x96(int irq, void *dev) > writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD); > > if ((value0 >> 27) & 0x1) > - complete(&ispif->reset_complete); > + complete(&ispif->reset_complete[0]); > + > + if ((value3 >> 27) & 0x1) > + complete(&ispif->reset_complete[1]); > > if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW)) > dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n"); > @@ -237,7 +241,7 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev) > writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD); > > if ((value0 >> 27) & 0x1) > - complete(&ispif->reset_complete); > + complete(&ispif->reset_complete[0]); > > if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW)) > dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n"); > @@ -257,33 +261,18 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev) > return IRQ_HANDLED; > } > > -/* > - * ispif_reset - Trigger reset on ISPIF module and wait to complete > - * @ispif: ISPIF device > - * > - * Return 0 on success or a negative error code otherwise > - */ > -static int ispif_reset(struct ispif_device *ispif) > +static int ispif_vfe_reset(struct ispif_device *ispif, u8 vfe_id) > { > unsigned long time; > u32 val; > - int ret; > - > - ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0); > - if (ret < 0) > - return ret; > > - ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1); > - if (ret < 0) > - return ret; > - > - ret = camss_enable_clocks(ispif->nclocks_for_reset, > - ispif->clock_for_reset, > - to_device(ispif)); > - if (ret < 0) > - return ret; > + if (vfe_id > (to_camss(ispif)->vfe_num - 1)) { > + dev_err(to_device(ispif), > + "Error: asked reset for invalid VFE%d\n", vfe_id); > + return -ENOENT; > + } I was stumbled upon this "vfe_num" usage, which seems unnecessary... > > - reinit_completion(&ispif->reset_complete); > + reinit_completion(&ispif->reset_complete[vfe_id]); > > val = ISPIF_RST_CMD_0_STROBED_RST_EN | > ISPIF_RST_CMD_0_MISC_LOGIC_RST | > @@ -303,15 +292,50 @@ static int ispif_reset(struct ispif_device *ispif) > ISPIF_RST_CMD_0_RDI_OUTPUT_1_MISR_RST | > ISPIF_RST_CMD_0_RDI_OUTPUT_2_MISR_RST; > > - writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0); > + if (vfe_id == 1) > + writel_relaxed(val, ispif->base + ISPIF_RST_CMD_1); > + else > + writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0); > > - time = wait_for_completion_timeout(&ispif->reset_complete, > + time = wait_for_completion_timeout(&ispif->reset_complete[vfe_id], > msecs_to_jiffies(ISPIF_RESET_TIMEOUT_MS)); > if (!time) { > - dev_err(to_device(ispif), "ISPIF reset timeout\n"); > - ret = -EIO; > + dev_err(to_device(ispif), > + "ISPIF for VFE%d reset timeout\n", vfe_id); > + return -EIO; > } > > + return 0; > +} > + > +/* > + * ispif_reset - Trigger reset on ISPIF module and wait to complete > + * @ispif: ISPIF device > + * > + * Return 0 on success or a negative error code otherwise > + */ > +static int ispif_reset(struct ispif_device *ispif, u8 vfe_id) > +{ > + int ret; > + > + ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0); > + if (ret < 0) > + return ret; > + > + ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1); > + if (ret < 0) > + return ret; > + > + ret = camss_enable_clocks(ispif->nclocks_for_reset, > + ispif->clock_for_reset, > + to_device(ispif)); > + if (ret < 0) > + return ret; > + > + ret = ispif_vfe_reset(ispif, vfe_id); > + if (ret) > + dev_dbg(to_device(ispif), "ISPIF Reset failed\n"); > + > camss_disable_clocks(ispif->nclocks_for_reset, ispif->clock_for_reset); > > camss_pm_domain_off(to_camss(ispif), PM_DOMAIN_VFE0); > @@ -355,7 +379,7 @@ static int ispif_set_power(struct v4l2_subdev *sd, int on) > goto exit; > } > > - ret = ispif_reset(ispif); > + ret = ispif_reset(ispif, line->vfe_id); But in fact here is an error. line->vfe_id is never set. I'm unable to test any fix, since I don't have a correspondent hardware, but I can write a fix for someone's testing. -- Best wishes, Vladimir
Wow, a patchset from 2020. On 25/05/2022 12:03, Vladimir Zapolskiy wrote: > On 10/22/20 20:47, kholk11@gmail.com wrote: >> From: AngeloGioacchino Del Regno <kholk11@gmail.com> >> >> Resetting the ISPIF VFE0 context is wrong if we are using the VFE1 >> for dual-camera or simply because a secondary camera is connected >> to it: in this case the reset will always happen on the VFE0 ctx >> of the ISPIF, which is .. useless. >> >> Fix this usecase by adding the ISPIF_RST_CMD_1 address and choose >> where to do the (or what to) reset based on the VFE line id. >> >> Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> >> Reviewed-by: Robert Foss <robert.foss@linaro.org> >> --- >> .../media/platform/qcom/camss/camss-ispif.c | 85 ++++++++++++------- >> .../media/platform/qcom/camss/camss-ispif.h | 2 +- >> 2 files changed, 56 insertions(+), 31 deletions(-) >> [skipped] >> @@ -355,7 +379,7 @@ static int ispif_set_power(struct v4l2_subdev *sd, >> int on) >> goto exit; >> } >> - ret = ispif_reset(ispif); >> + ret = ispif_reset(ispif, line->vfe_id); > > But in fact here is an error. > > line->vfe_id is never set. > > I'm unable to test any fix, since I don't have a correspondent hardware, > but I can write a fix for someone's testing. I have a sda660 device, but I don't have cameras attached. So one will have to use TPG.
diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c b/drivers/media/platform/qcom/camss/camss-ispif.c index db94cfd6c508..754f0d044c38 100644 --- a/drivers/media/platform/qcom/camss/camss-ispif.c +++ b/drivers/media/platform/qcom/camss/camss-ispif.c @@ -26,6 +26,7 @@ #define MSM_ISPIF_NAME "msm_ispif" #define ISPIF_RST_CMD_0 0x008 +#define ISPIF_RST_CMD_1 0x00c #define ISPIF_RST_CMD_0_STROBED_RST_EN (1 << 0) #define ISPIF_RST_CMD_0_MISC_LOGIC_RST (1 << 1) #define ISPIF_RST_CMD_0_SW_REG_RST (1 << 2) @@ -179,7 +180,10 @@ static irqreturn_t ispif_isr_8x96(int irq, void *dev) writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD); if ((value0 >> 27) & 0x1) - complete(&ispif->reset_complete); + complete(&ispif->reset_complete[0]); + + if ((value3 >> 27) & 0x1) + complete(&ispif->reset_complete[1]); if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW)) dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n"); @@ -237,7 +241,7 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev) writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD); if ((value0 >> 27) & 0x1) - complete(&ispif->reset_complete); + complete(&ispif->reset_complete[0]); if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW)) dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n"); @@ -257,33 +261,18 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev) return IRQ_HANDLED; } -/* - * ispif_reset - Trigger reset on ISPIF module and wait to complete - * @ispif: ISPIF device - * - * Return 0 on success or a negative error code otherwise - */ -static int ispif_reset(struct ispif_device *ispif) +static int ispif_vfe_reset(struct ispif_device *ispif, u8 vfe_id) { unsigned long time; u32 val; - int ret; - - ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0); - if (ret < 0) - return ret; - ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1); - if (ret < 0) - return ret; - - ret = camss_enable_clocks(ispif->nclocks_for_reset, - ispif->clock_for_reset, - to_device(ispif)); - if (ret < 0) - return ret; + if (vfe_id > (to_camss(ispif)->vfe_num - 1)) { + dev_err(to_device(ispif), + "Error: asked reset for invalid VFE%d\n", vfe_id); + return -ENOENT; + } - reinit_completion(&ispif->reset_complete); + reinit_completion(&ispif->reset_complete[vfe_id]); val = ISPIF_RST_CMD_0_STROBED_RST_EN | ISPIF_RST_CMD_0_MISC_LOGIC_RST | @@ -303,15 +292,50 @@ static int ispif_reset(struct ispif_device *ispif) ISPIF_RST_CMD_0_RDI_OUTPUT_1_MISR_RST | ISPIF_RST_CMD_0_RDI_OUTPUT_2_MISR_RST; - writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0); + if (vfe_id == 1) + writel_relaxed(val, ispif->base + ISPIF_RST_CMD_1); + else + writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0); - time = wait_for_completion_timeout(&ispif->reset_complete, + time = wait_for_completion_timeout(&ispif->reset_complete[vfe_id], msecs_to_jiffies(ISPIF_RESET_TIMEOUT_MS)); if (!time) { - dev_err(to_device(ispif), "ISPIF reset timeout\n"); - ret = -EIO; + dev_err(to_device(ispif), + "ISPIF for VFE%d reset timeout\n", vfe_id); + return -EIO; } + return 0; +} + +/* + * ispif_reset - Trigger reset on ISPIF module and wait to complete + * @ispif: ISPIF device + * + * Return 0 on success or a negative error code otherwise + */ +static int ispif_reset(struct ispif_device *ispif, u8 vfe_id) +{ + int ret; + + ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0); + if (ret < 0) + return ret; + + ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1); + if (ret < 0) + return ret; + + ret = camss_enable_clocks(ispif->nclocks_for_reset, + ispif->clock_for_reset, + to_device(ispif)); + if (ret < 0) + return ret; + + ret = ispif_vfe_reset(ispif, vfe_id); + if (ret) + dev_dbg(to_device(ispif), "ISPIF Reset failed\n"); + camss_disable_clocks(ispif->nclocks_for_reset, ispif->clock_for_reset); camss_pm_domain_off(to_camss(ispif), PM_DOMAIN_VFE0); @@ -355,7 +379,7 @@ static int ispif_set_power(struct v4l2_subdev *sd, int on) goto exit; } - ret = ispif_reset(ispif); + ret = ispif_reset(ispif, line->vfe_id); if (ret < 0) { pm_runtime_put_sync(dev); camss_disable_clocks(ispif->nclocks, ispif->clock); @@ -1192,7 +1216,8 @@ int msm_ispif_subdev_init(struct ispif_device *ispif, mutex_init(&ispif->config_lock); - init_completion(&ispif->reset_complete); + for (i = 0; i < MSM_ISPIF_VFE_NUM; i++) + init_completion(&ispif->reset_complete[i]); return 0; } diff --git a/drivers/media/platform/qcom/camss/camss-ispif.h b/drivers/media/platform/qcom/camss/camss-ispif.h index 1a5ba2425a42..4132174f7ea1 100644 --- a/drivers/media/platform/qcom/camss/camss-ispif.h +++ b/drivers/media/platform/qcom/camss/camss-ispif.h @@ -56,7 +56,7 @@ struct ispif_device { int nclocks; struct camss_clock *clock_for_reset; int nclocks_for_reset; - struct completion reset_complete; + struct completion reset_complete[MSM_ISPIF_VFE_NUM]; int power_count; struct mutex power_lock; struct ispif_intf_cmd_reg intf_cmd[MSM_ISPIF_VFE_NUM];