diff mbox series

[v5,2/3] ARM: dts: aspeed: Add USB2.0 device controller node

Message ID 20220523030134.2977116-3-neal_liu@aspeedtech.com (mailing list archive)
State Accepted
Commit c9cb67c3a650ef880ddbfc5906e2b9f51726dd5c
Headers show
Series add Aspeed udc driver for ast2600 | expand

Commit Message

Neal Liu May 23, 2022, 3:01 a.m. UTC
Add USB2.0 device controller(udc) node to device tree
for AST2600.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
---
 arch/arm/boot/dts/aspeed-g6.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Neal Liu May 30, 2022, 1:27 a.m. UTC | #1
Gentle ping on this path, thanks.

> -----Original Message-----
> From: Neal Liu <neal_liu@aspeedtech.com>
> Sent: Monday, May 23, 2022 11:02 AM
> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Rob Herring
> <robh+dt@kernel.org>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@linaro.org>; Joel Stanley <joel@jms.id.au>; Andrew
> Jeffery <andrew@aj.id.au>; Felipe Balbi <balbi@kernel.org>; Sumit Semwal
> <sumit.semwal@linaro.org>; Christian König <christian.koenig@amd.com>;
> Geert Uytterhoeven <geert@linux-m68k.org>; Li Yang <leoyang.li@nxp.com>
> Cc: Neal Liu <neal_liu@aspeedtech.com>; linux-aspeed@lists.ozlabs.org;
> linux-usb@vger.kernel.org; devicetree@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
> linaro-mm-sig@lists.linaro.org
> Subject: [PATCH v5 2/3] ARM: dts: aspeed: Add USB2.0 device controller node
> 
> Add USB2.0 device controller(udc) node to device tree for AST2600.
> 
> Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
> ---
>  arch/arm/boot/dts/aspeed-g6.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi
> b/arch/arm/boot/dts/aspeed-g6.dtsi
> index 3d5ce9da42c3..822f4fd854f5 100644
> --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> @@ -298,6 +298,16 @@ vhub: usb-vhub@1e6a0000 {
>  			status = "disabled";
>  		};
> 
> +		udc: usb@1e6a2000 {
> +			compatible = "aspeed,ast2600-udc";
> +			reg = <0x1e6a2000 0x300>;
> +			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_usb2bd_default>;
> +			status = "disabled";
> +		};
> +
>  		apb {
>  			compatible = "simple-bus";
>  			#address-cells = <1>;
> --
> 2.25.1
Krzysztof Kozlowski May 30, 2022, 6:33 a.m. UTC | #2
On 30/05/2022 03:27, Neal Liu wrote:
> Gentle ping on this path, thanks.

It's a merge window, so now not much might happen. Please resend in a week.

> 
>> -----Original Message-----
>> From: Neal Liu <neal_liu@aspeedtech.com>
>> Sent: Monday, May 23, 2022 11:02 AM
>> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Rob Herring

(...)

>>
>> Add USB2.0 device controller(udc) node to device tree for AST2600.
>>
>> Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>

You don't need my ack here, but anyway FWIW:

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof
Neal Liu May 30, 2022, 6:37 a.m. UTC | #3
> On 30/05/2022 03:27, Neal Liu wrote:
> > Gentle ping on this path, thanks.
> 
> It's a merge window, so now not much might happen. Please resend in a week.

Got it, @Greg just told me. Thanks for the notice.

> 
> >
> >> -----Original Message-----
> >> From: Neal Liu <neal_liu@aspeedtech.com>
> >> Sent: Monday, May 23, 2022 11:02 AM
> >> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Rob Herring
> 
> (...)
> 
> >>
> >> Add USB2.0 device controller(udc) node to device tree for AST2600.
> >>
> >> Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
> 
> You don't need my ack here, but anyway FWIW:
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Thanks for your review !

> 
> 
> Best regards,
> Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 3d5ce9da42c3..822f4fd854f5 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -298,6 +298,16 @@  vhub: usb-vhub@1e6a0000 {
 			status = "disabled";
 		};
 
+		udc: usb@1e6a2000 {
+			compatible = "aspeed,ast2600-udc";
+			reg = <0x1e6a2000 0x300>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bd_default>;
+			status = "disabled";
+		};
+
 		apb {
 			compatible = "simple-bus";
 			#address-cells = <1>;