Message ID | 20220406160123.1272911-10-l.stach@pengutronix.de |
---|---|
State | Superseded |
Headers | show |
Series | i.MX8MP HDMI support | expand |
Hi Lucas, Am Mittwoch, 6. April 2022, 18:01:22 CEST schrieb Lucas Stach: > This adds the DT nodes for all the peripherals that make up the > HDMI display pipeline. > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > --- > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 80 +++++++++++++++++++++++ > 1 file changed, 80 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index > 6b7b5ba32b48..a41da99e9537 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > @@ -1087,6 +1087,86 @@ irqsteer_hdmi: interrupt-controller@32fc2000 { > clock-names = "ipg"; > power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>; > }; > + > + hdmi_pvi: display-bridge@32fc4000 { > + compatible = "fsl,imx8mp-hdmi- pvi"; > + reg = <0x32fc4000 0x40>; > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>; This should be disabled by default as well. Unless 'hdmi_tx: hdmi@32fd8000' is enabled, this results in the warning: imx-hdmi-pvi: probe of 32fc4000.display-bridge failed with error -22 Best regards Alexander > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + pvi_from_lcdif3: endpoint { > + remote-endpoint = <&lcdif3_to_pvi>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + pvi_to_hdmi_tx: endpoint { > + remote-endpoint = <&hdmi_tx_from_pvi>; > + }; > + }; > + }; > + }; > + > + lcdif3: display-controller@32fc6000 { > + compatible = "fsl,imx8mp-lcdif"; > + reg = <0x32fc6000 0x238>; > + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-parent = <&irqsteer_hdmi>; > + clocks = <&hdmi_tx_phy>, > + <&clk IMX8MP_CLK_HDMI_APB>, > + <&clk IMX8MP_CLK_HDMI_ROOT>; > + clock-names = "pix", "axi", "disp_axi"; > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>; > + > + port { > + lcdif3_to_pvi: endpoint { > + remote- endpoint = <&pvi_from_lcdif3>; > + }; > + }; > + }; > + > + hdmi_tx: hdmi@32fd8000 { > + compatible = "fsl,imx8mp-hdmi"; > + reg = <0x32fd8000 0x7eff>; > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-parent = <&irqsteer_hdmi>; > + clocks = <&clk IMX8MP_CLK_HDMI_APB>, > + <&clk IMX8MP_CLK_HDMI_REF_266M>, > + <&clk IMX8MP_CLK_32K>, > + <&hdmi_tx_phy>; > + clock-names = "iahb", "isfr", "cec", "pix"; > + assigned-clocks = <&clk IMX8MP_CLK_HDMI_REF_266M>; > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>; > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>; > + reg-io-width = <1>; > + status = "disabled"; > + > + port { > + hdmi_tx_from_pvi: endpoint { > + remote- endpoint = <&pvi_to_hdmi_tx>; > + }; > + }; > + }; > + > + hdmi_tx_phy: phy@32fdff00 { > + compatible = "fsl,imx8mp-hdmi- phy"; > + reg = <0x32fdff00 0x100>; > + clocks = <&clk IMX8MP_CLK_HDMI_APB>, > + <&clk IMX8MP_CLK_HDMI_24M>; > + clock-names = "apb", "ref"; > + assigned-clocks = <&clk IMX8MP_CLK_HDMI_24M>; > + assigned-clock-parents = <&clk IMX8MP_CLK_24M>; > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>; > + #clock-cells = <0>; > + #phy-cells = <0>; > + status = "disabled"; > + }; > }; > > gpu3d: gpu@38000000 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 6b7b5ba32b48..a41da99e9537 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -1087,6 +1087,86 @@ irqsteer_hdmi: interrupt-controller@32fc2000 { clock-names = "ipg"; power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>; }; + + hdmi_pvi: display-bridge@32fc4000 { + compatible = "fsl,imx8mp-hdmi-pvi"; + reg = <0x32fc4000 0x40>; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pvi_from_lcdif3: endpoint { + remote-endpoint = <&lcdif3_to_pvi>; + }; + }; + + port@1 { + reg = <1>; + pvi_to_hdmi_tx: endpoint { + remote-endpoint = <&hdmi_tx_from_pvi>; + }; + }; + }; + }; + + lcdif3: display-controller@32fc6000 { + compatible = "fsl,imx8mp-lcdif"; + reg = <0x32fc6000 0x238>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&irqsteer_hdmi>; + clocks = <&hdmi_tx_phy>, + <&clk IMX8MP_CLK_HDMI_APB>, + <&clk IMX8MP_CLK_HDMI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>; + + port { + lcdif3_to_pvi: endpoint { + remote-endpoint = <&pvi_from_lcdif3>; + }; + }; + }; + + hdmi_tx: hdmi@32fd8000 { + compatible = "fsl,imx8mp-hdmi"; + reg = <0x32fd8000 0x7eff>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&irqsteer_hdmi>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>, + <&clk IMX8MP_CLK_HDMI_REF_266M>, + <&clk IMX8MP_CLK_32K>, + <&hdmi_tx_phy>; + clock-names = "iahb", "isfr", "cec", "pix"; + assigned-clocks = <&clk IMX8MP_CLK_HDMI_REF_266M>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>; + reg-io-width = <1>; + status = "disabled"; + + port { + hdmi_tx_from_pvi: endpoint { + remote-endpoint = <&pvi_to_hdmi_tx>; + }; + }; + }; + + hdmi_tx_phy: phy@32fdff00 { + compatible = "fsl,imx8mp-hdmi-phy"; + reg = <0x32fdff00 0x100>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>, + <&clk IMX8MP_CLK_HDMI_24M>; + clock-names = "apb", "ref"; + assigned-clocks = <&clk IMX8MP_CLK_HDMI_24M>; + assigned-clock-parents = <&clk IMX8MP_CLK_24M>; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>; + #clock-cells = <0>; + #phy-cells = <0>; + status = "disabled"; + }; }; gpu3d: gpu@38000000 {
This adds the DT nodes for all the peripherals that make up the HDMI display pipeline. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 80 +++++++++++++++++++++++ 1 file changed, 80 insertions(+)