| Message ID | 20220531111900.19422-11-peterwu.pub@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add Mediatek MT6370 PMIC support | expand |
On Tue, 31 May 2022 19:18:56 +0800 ChiaEn Wu <peterwu.pub@gmail.com> wrote: > From: ChiaEn Wu <chiaen_wu@richtek.com> > > Add Mediatek MT6370 ADC support. > > Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> Hi ChiaEn, A few comments inline. Thanks, Jonathan > --- > drivers/iio/adc/Kconfig | 9 ++ > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/mt6370-adc.c | 257 +++++++++++++++++++++++++++++++++++ > 3 files changed, 267 insertions(+) > create mode 100644 drivers/iio/adc/mt6370-adc.c > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > index 71ab0a06aa82..d7932dd9b773 100644 > --- a/drivers/iio/adc/Kconfig > +++ b/drivers/iio/adc/Kconfig > @@ -737,6 +737,15 @@ config MEDIATEK_MT6360_ADC > is used in smartphones and tablets and supports a 11 channel > general purpose ADC. > > +config MEDIATEK_MT6370_ADC > + tristate "Mediatek MT6370 ADC driver" > + depends on MFD_MT6370 > + help > + Say Y here to enable MT6370 ADC support. > + Integrated for System Monitoring includes The wrapping of this text needs cleaning up. > + is used in smartphones and tablets and supports a 9 channel > + general purpose ADC. > + > config MEDIATEK_MT6577_AUXADC > tristate "MediaTek AUXADC driver" > depends on ARCH_MEDIATEK || COMPILE_TEST > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > index 39d806f6d457..0ce285c7e2d0 100644 > --- a/drivers/iio/adc/Makefile > +++ b/drivers/iio/adc/Makefile > @@ -68,6 +68,7 @@ obj-$(CONFIG_MCP320X) += mcp320x.o > obj-$(CONFIG_MCP3422) += mcp3422.o > obj-$(CONFIG_MCP3911) += mcp3911.o > obj-$(CONFIG_MEDIATEK_MT6360_ADC) += mt6360-adc.o > +obj-$(CONFIG_MEDIATEK_MT6370_ADC) += mt6370-adc.o > obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o > obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o > obj-$(CONFIG_MESON_SARADC) += meson_saradc.o > diff --git a/drivers/iio/adc/mt6370-adc.c b/drivers/iio/adc/mt6370-adc.c > new file mode 100644 > index 000000000000..3320ebca17ad > --- /dev/null > +++ b/drivers/iio/adc/mt6370-adc.c > @@ -0,0 +1,257 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +#include <dt-bindings/iio/adc/mediatek,mt6370_adc.h> > +#include <linux/bits.h> > +#include <linux/bitfield.h> > +#include <linux/iio/iio.h> > +#include <linux/irq.h> Not seeing any interrupt support in here. > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/mutex.h> > +#include <linux/platform_device.h> > +#include <linux/regmap.h> > + > +#define MT6370_REG_CHG_CTRL3 0x113 /* AICR */ > +#define MT6370_REG_CHG_CTRL7 0x117 /* ICHG */ > +#define MT6370_REG_CHG_ADC 0x121 > +#define MT6370_REG_ADC_DATA_H 0x14C > + > +#define MT6370_ADC_START_MASK BIT(0) > +#define MT6370_ADC_IN_SEL_MASK GENMASK(7, 4) > +#define MT6370_AICR_ICHG_MASK GENMASK(7, 2) > + > +#define MT6370_ADC_CHAN_SHIFT 4 Prefer using a mask and then FIELD_PREP > + > +#define MT6370_AICR_400MA 0x6 > +#define MT6370_ICHG_500MA 0x4 > +#define MT6370_ICHG_900MA 0x8 > + > +#define ADC_CONV_TIME_US 35000 > +#define ADC_CONV_POLLING_TIME 1000 > + > +struct mt6370_adc_data { > + struct device *dev; > + struct regmap *regmap; > + struct mutex lock; All locks need documentation. What is the scope of the lock? Looks like it protects device state when doing setup, wait for read, read cycles. > +}; > + > +static int mt6370_adc_read_channel(struct mt6370_adc_data *priv, int chan, > + unsigned long addr, int *val) > +{ > + __be16 be_val; > + unsigned int reg_val; > + int ret; > + > + mutex_lock(&priv->lock); > + > + reg_val = MT6370_ADC_START_MASK | (addr << MT6370_ADC_CHAN_SHIFT); FIELD_PREP for that shift? > + ret = regmap_write(priv->regmap, MT6370_REG_CHG_ADC, reg_val); > + if (ret) > + goto adc_unlock; > + > + msleep(ADC_CONV_TIME_US / 1000); > + > + ret = regmap_read_poll_timeout(priv->regmap, > + MT6370_REG_CHG_ADC, reg_val, > + !(reg_val & MT6370_ADC_START_MASK), > + ADC_CONV_POLLING_TIME, > + ADC_CONV_TIME_US * 3); > + if (ret) { > + if (ret == -ETIMEDOUT) > + dev_err(priv->dev, "Failed to wait adc conversion\n"); > + goto adc_unlock; > + } > + > + ret = regmap_raw_read(priv->regmap, MT6370_REG_ADC_DATA_H, > + &be_val, sizeof(be_val)); > + if (ret) > + goto adc_unlock; > + > + *val = be16_to_cpu(be_val); > + ret = IIO_VAL_INT; > + > +adc_unlock: > + mutex_unlock(&priv->lock); > + > + return ret; > +} > + > +static int mt6370_adc_read_scale(struct mt6370_adc_data *priv, > + int chan, int *val1, int *val2) > +{ > + unsigned int reg_val; > + int ret; > + > + switch (chan) { > + case MT6370_CHAN_VBAT: > + case MT6370_CHAN_VSYS: > + case MT6370_CHAN_CHG_VDDP: > + *val1 = 5000; This seems very large. Voltages are in millivolts as per Documentation/ABI/testing/sysfs-bus-iio and this means each step is 5 volts. So value in mv is currently 5 * _raw > + return IIO_VAL_INT; > + case MT6370_CHAN_IBUS: > + ret = regmap_read(priv->regmap, MT6370_REG_CHG_CTRL3, ®_val); > + if (ret) > + return ret; > + > + reg_val = FIELD_GET(MT6370_AICR_ICHG_MASK, reg_val); > + if (reg_val < MT6370_AICR_400MA) > + *val1 = 33500; > + else > + *val1 = 50000; > + > + return IIO_VAL_INT; > + case MT6370_CHAN_IBAT: > + ret = regmap_read(priv->regmap, MT6370_REG_CHG_CTRL7, ®_val); > + if (ret) > + return ret; > + > + reg_val = FIELD_GET(MT6370_AICR_ICHG_MASK, reg_val); > + if (reg_val < MT6370_ICHG_500MA) > + *val1 = 23750; > + else if (reg_val >= MT6370_ICHG_500MA && > + reg_val < MT6370_ICHG_900MA) > + *val1 = 26800; > + else > + *val1 = 50000; > + > + return IIO_VAL_INT; > + case MT6370_CHAN_VBUSDIV5: > + *val1 = 25000; > + return IIO_VAL_INT; > + case MT6370_CHAN_VBUSDIV2: > + *val1 = 50000; > + return IIO_VAL_INT; > + case MT6370_CHAN_TS_BAT: > + *val1 = 25; > + *val2 = 10000; > + return IIO_VAL_FRACTIONAL; > + case MT6370_CHAN_TEMP_JC: > + *val1 = 2; > + return IIO_VAL_INT; > + } > + > + return -EINVAL; > +} > + > +static int mt6370_adc_read_offset(struct mt6370_adc_data *priv, > + int chan, int *val) > +{ > + *val = (chan == MT6370_CHAN_TEMP_JC) ? -20 : 0; Offset default is 0, so for channels where it doesn't apply don't provide the offset attribute at all. > + return IIO_VAL_INT; > +} > + > +static int mt6370_adc_read_raw(struct iio_dev *iio_dev, > + const struct iio_chan_spec *chan, > + int *val, int *val2, long mask) > +{ > + struct mt6370_adc_data *priv = iio_priv(iio_dev); > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + return mt6370_adc_read_channel(priv, chan->channel, > + chan->address, val); > + case IIO_CHAN_INFO_SCALE: > + return mt6370_adc_read_scale(priv, chan->channel, val, val2); > + case IIO_CHAN_INFO_OFFSET: > + return mt6370_adc_read_offset(priv, chan->channel, val); > + } > + > + return -EINVAL; > +} > + > +static const char * const mt6370_channel_labels[MT6370_CHAN_MAX] = { Perhaps define an enum with which to index this and the chan spec and hence ensure they end up matching. [vbusdiv5] = "vbusdiv5", etc > + "vbusdiv5", "vbusdiv2", "vsys", "vbat", > + "ts_bat", "ibus", "ibat", "chg_vddp", > + "temp_jc", > +}; > + > +static int mt6370_adc_read_label(struct iio_dev *iio_dev, > + struct iio_chan_spec const *chan, char *label) > +{ > + return snprintf(label, PAGE_SIZE, "%s\n", > + mt6370_channel_labels[chan->channel]); > +} > + > +static const struct iio_info mt6370_adc_iio_info = { > + .read_raw = mt6370_adc_read_raw, > + .read_label = mt6370_adc_read_label, > +}; > + > +#define MT6370_ADC_CHAN(_idx, _type, _addr) { \ > + .type = _type, \ > + .channel = MT6370_CHAN_##_idx, \ > + .address = _addr, \ > + .scan_index = MT6370_CHAN_##_idx, \ > + .indexed = 1, \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > + BIT(IIO_CHAN_INFO_SCALE) | \ > + BIT(IIO_CHAN_INFO_OFFSET), \ See above. Only temp_jc channel should hav an offset. > +} > + > +static const struct iio_chan_spec mt6370_adc_channels[] = { > + MT6370_ADC_CHAN(VBUSDIV5, IIO_VOLTAGE, 1), > + MT6370_ADC_CHAN(VBUSDIV2, IIO_VOLTAGE, 2), > + MT6370_ADC_CHAN(VSYS, IIO_VOLTAGE, 3), > + MT6370_ADC_CHAN(VBAT, IIO_VOLTAGE, 4), > + MT6370_ADC_CHAN(TS_BAT, IIO_VOLTAGE, 6), > + MT6370_ADC_CHAN(IBUS, IIO_CURRENT, 8), > + MT6370_ADC_CHAN(IBAT, IIO_CURRENT, 9), > + MT6370_ADC_CHAN(CHG_VDDP, IIO_VOLTAGE, 11), > + MT6370_ADC_CHAN(TEMP_JC, IIO_TEMP, 12), > +}; > + > +static int mt6370_adc_probe(struct platform_device *pdev) > +{ > + int ret; > + struct mt6370_adc_data *priv; > + struct regmap *regmap; > + struct iio_dev *indio_dev; > + > + regmap = dev_get_regmap(pdev->dev.parent, NULL); > + if (!regmap) { > + dev_err(&pdev->dev, "Failed to get regmap\n"); > + return -ENODEV; > + } > + > + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv)); > + if (!indio_dev) > + return -ENOMEM; > + > + priv = iio_priv(indio_dev); > + priv->dev = &pdev->dev; > + priv->regmap = regmap; > + mutex_init(&priv->lock); > + > + ret = regmap_write(priv->regmap, MT6370_REG_CHG_ADC, 0); > + if (ret) { > + dev_err(&pdev->dev, "Failed to reset adc\n"); > + return ret; > + } > + > + indio_dev->name = dev_name(&pdev->dev); What does this end up as? It's used for userspace ABI and should correspond to the part number, "mt6370-adc" probably appropriate in this case (I think it'll end up as simply "adc.x" currently?) Normally we just hard code this in the driver for whatever devices the driver supports. > + indio_dev->info = &mt6370_adc_iio_info; > + indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->channels = mt6370_adc_channels; > + indio_dev->num_channels = ARRAY_SIZE(mt6370_adc_channels); > + > + return devm_iio_device_register(&pdev->dev, indio_dev); > +} > + > +static const struct of_device_id mt6370_adc_of_id[] = { > + { .compatible = "mediatek,mt6370-adc", }, > + {} > +}; > +MODULE_DEVICE_TABLE(of, mt6370_adc_of_id); > + > +static struct platform_driver mt6370_adc_driver = { > + .driver = { > + .name = "mt6370-adc", > + .of_match_table = mt6370_adc_of_id, > + }, > + .probe = mt6370_adc_probe, > +}; > +module_platform_driver(mt6370_adc_driver); > + > +MODULE_AUTHOR("ChiaEn Wu <chiaen_wu@richtek.com>"); > +MODULE_DESCRIPTION("MT6370 ADC Drvier"); > +MODULE_LICENSE("GPL v2");
Hi Jonathan, Sorry for sending the same email again. I miss to reply all in the last email.. Thanks for your valuable suggestions! Jonathan Cameron <Jonathan.Cameron@huawei.com> 於 2022年5月31日 週二 下午9:21寫道： > > On Tue, 31 May 2022 19:18:56 +0800 > ChiaEn Wu <peterwu.pub@gmail.com> wrote: > > > From: ChiaEn Wu <chiaen_wu@richtek.com> > > > > Add Mediatek MT6370 ADC support. > > > > Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> > > Hi ChiaEn, > > A few comments inline. > > Thanks, > > Jonathan > > > --- > > drivers/iio/adc/Kconfig | 9 ++ > > drivers/iio/adc/Makefile | 1 + > > drivers/iio/adc/mt6370-adc.c | 257 +++++++++++++++++++++++++++++++++++ > > 3 files changed, 267 insertions(+) > > create mode 100644 drivers/iio/adc/mt6370-adc.c > > > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > > index 71ab0a06aa82..d7932dd9b773 100644 > > --- a/drivers/iio/adc/Kconfig > > +++ b/drivers/iio/adc/Kconfig > > @@ -737,6 +737,15 @@ config MEDIATEK_MT6360_ADC > > is used in smartphones and tablets and supports a 11 channel > > general purpose ADC. > > > > +config MEDIATEK_MT6370_ADC > > + tristate "Mediatek MT6370 ADC driver" > > + depends on MFD_MT6370 > > + help > > + Say Y here to enable MT6370 ADC support. > > + Integrated for System Monitoring includes > > The wrapping of this text needs cleaning up. > > > + is used in smartphones and tablets and supports a 9 channel > > + general purpose ADC. > > + > > config MEDIATEK_MT6577_AUXADC > > tristate "MediaTek AUXADC driver" > > depends on ARCH_MEDIATEK || COMPILE_TEST > > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > > index 39d806f6d457..0ce285c7e2d0 100644 > > --- a/drivers/iio/adc/Makefile > > +++ b/drivers/iio/adc/Makefile > > @@ -68,6 +68,7 @@ obj-$(CONFIG_MCP320X) += mcp320x.o > > obj-$(CONFIG_MCP3422) += mcp3422.o > > obj-$(CONFIG_MCP3911) += mcp3911.o > > obj-$(CONFIG_MEDIATEK_MT6360_ADC) += mt6360-adc.o > > +obj-$(CONFIG_MEDIATEK_MT6370_ADC) += mt6370-adc.o > > obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o > > obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o > > obj-$(CONFIG_MESON_SARADC) += meson_saradc.o > > diff --git a/drivers/iio/adc/mt6370-adc.c b/drivers/iio/adc/mt6370-adc.c > > new file mode 100644 > > index 000000000000..3320ebca17ad > > --- /dev/null > > +++ b/drivers/iio/adc/mt6370-adc.c > > @@ -0,0 +1,257 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > + > > +#include <dt-bindings/iio/adc/mediatek,mt6370_adc.h> > > +#include <linux/bits.h> > > +#include <linux/bitfield.h> > > +#include <linux/iio/iio.h> > > +#include <linux/irq.h> > > Not seeing any interrupt support in here. Sorry for that I forgot remove this line, I'll refine it in the next patch. > > > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/mutex.h> > > +#include <linux/platform_device.h> > > +#include <linux/regmap.h> > > + > > +#define MT6370_REG_CHG_CTRL3 0x113 /* AICR */ > > +#define MT6370_REG_CHG_CTRL7 0x117 /* ICHG */ > > +#define MT6370_REG_CHG_ADC 0x121 > > +#define MT6370_REG_ADC_DATA_H 0x14C > > + > > +#define MT6370_ADC_START_MASK BIT(0) > > +#define MT6370_ADC_IN_SEL_MASK GENMASK(7, 4) > > +#define MT6370_AICR_ICHG_MASK GENMASK(7, 2) > > + > > +#define MT6370_ADC_CHAN_SHIFT 4 > > Prefer using a mask and then FIELD_PREP OK, I got it! > > > + > > +#define MT6370_AICR_400MA 0x6 > > +#define MT6370_ICHG_500MA 0x4 > > +#define MT6370_ICHG_900MA 0x8 > > + > > +#define ADC_CONV_TIME_US 35000 > > +#define ADC_CONV_POLLING_TIME 1000 > > + > > +struct mt6370_adc_data { > > + struct device *dev; > > + struct regmap *regmap; > > + struct mutex lock; > > All locks need documentation. What is the scope of the lock? > Looks like it protects device state when doing setup, wait for read, read > cycles. This mutex lock is for preventing the different adc channel from being read at the same time. So, if I just change its name to adc_chan_lock or adc_lock and add the comment for this mutex lock, does this change meet your requirement? > > > +}; > > + > > +static int mt6370_adc_read_channel(struct mt6370_adc_data *priv, int chan, > > + unsigned long addr, int *val) > > +{ > > + __be16 be_val; > > + unsigned int reg_val; > > + int ret; > > + > > + mutex_lock(&priv->lock); > > + > > + reg_val = MT6370_ADC_START_MASK | (addr << MT6370_ADC_CHAN_SHIFT); > > FIELD_PREP for that shift? I got it! I'll refine it in the next patch. > > > + ret = regmap_write(priv->regmap, MT6370_REG_CHG_ADC, reg_val); > > + if (ret) > > + goto adc_unlock; > > + > > + msleep(ADC_CONV_TIME_US / 1000); > > + > > + ret = regmap_read_poll_timeout(priv->regmap, > > + MT6370_REG_CHG_ADC, reg_val, > > + !(reg_val & MT6370_ADC_START_MASK), > > + ADC_CONV_POLLING_TIME, > > + ADC_CONV_TIME_US * 3); > > + if (ret) { > > + if (ret == -ETIMEDOUT) > > + dev_err(priv->dev, "Failed to wait adc conversion\n"); > > + goto adc_unlock; > > + } > > + > > + ret = regmap_raw_read(priv->regmap, MT6370_REG_ADC_DATA_H, > > + &be_val, sizeof(be_val)); > > + if (ret) > > + goto adc_unlock; > > + > > + *val = be16_to_cpu(be_val); > > + ret = IIO_VAL_INT; > > + > > +adc_unlock: > > + mutex_unlock(&priv->lock); > > + > > + return ret; > > +} > > + > > +static int mt6370_adc_read_scale(struct mt6370_adc_data *priv, > > + int chan, int *val1, int *val2) > > +{ > > + unsigned int reg_val; > > + int ret; > > + > > + switch (chan) { > > + case MT6370_CHAN_VBAT: > > + case MT6370_CHAN_VSYS: > > + case MT6370_CHAN_CHG_VDDP: > > + *val1 = 5000; > > This seems very large. Voltages are in millivolts > as per Documentation/ABI/testing/sysfs-bus-iio > and this means each step is 5 volts. > > So value in mv is currently 5 * _raw > OK, I got it. Also, I will add the ABI file in the next version. Thanks! > > > > + return IIO_VAL_INT; > > + case MT6370_CHAN_IBUS: > > + ret = regmap_read(priv->regmap, MT6370_REG_CHG_CTRL3, ®_val); > > + if (ret) > > + return ret; > > + > > + reg_val = FIELD_GET(MT6370_AICR_ICHG_MASK, reg_val); > > + if (reg_val < MT6370_AICR_400MA) > > + *val1 = 33500; > > + else > > + *val1 = 50000; > > + > > + return IIO_VAL_INT; > > + case MT6370_CHAN_IBAT: > > + ret = regmap_read(priv->regmap, MT6370_REG_CHG_CTRL7, ®_val); > > + if (ret) > > + return ret; > > + > > + reg_val = FIELD_GET(MT6370_AICR_ICHG_MASK, reg_val); > > + if (reg_val < MT6370_ICHG_500MA) > > + *val1 = 23750; > > + else if (reg_val >= MT6370_ICHG_500MA && > > + reg_val < MT6370_ICHG_900MA) > > + *val1 = 26800; > > + else > > + *val1 = 50000; > > + > > + return IIO_VAL_INT; > > + case MT6370_CHAN_VBUSDIV5: > > + *val1 = 25000; > > + return IIO_VAL_INT; > > + case MT6370_CHAN_VBUSDIV2: > > + *val1 = 50000; > > + return IIO_VAL_INT; > > + case MT6370_CHAN_TS_BAT: > > + *val1 = 25; > > + *val2 = 10000; > > + return IIO_VAL_FRACTIONAL; > > + case MT6370_CHAN_TEMP_JC: > > + *val1 = 2; > > + return IIO_VAL_INT; > > + } > > + > > + return -EINVAL; > > +} > > + > > +static int mt6370_adc_read_offset(struct mt6370_adc_data *priv, > > + int chan, int *val) > > +{ > > + *val = (chan == MT6370_CHAN_TEMP_JC) ? -20 : 0; > > Offset default is 0, so for channels where it doesn't apply don't > provide the offset attribute at all. > OK! > > + return IIO_VAL_INT; > > +} > > + > > +static int mt6370_adc_read_raw(struct iio_dev *iio_dev, > > + const struct iio_chan_spec *chan, > > + int *val, int *val2, long mask) > > +{ > > + struct mt6370_adc_data *priv = iio_priv(iio_dev); > > + > > + switch (mask) { > > + case IIO_CHAN_INFO_RAW: > > + return mt6370_adc_read_channel(priv, chan->channel, > > + chan->address, val); > > + case IIO_CHAN_INFO_SCALE: > > + return mt6370_adc_read_scale(priv, chan->channel, val, val2); > > + case IIO_CHAN_INFO_OFFSET: > > + return mt6370_adc_read_offset(priv, chan->channel, val); > > + } > > + > > + return -EINVAL; > > +} > > + > > +static const char * const mt6370_channel_labels[MT6370_CHAN_MAX] = { > > Perhaps define an enum with which to index this and the chan spec > and hence ensure they end up matching. > [vbusdiv5] = "vbusdiv5", etc > Do you mean that I can refine this const char array to the following array?? static const char * const mt6370_channel_labels[MT6370_CHAN_MAX] = { [MT6370_CHAN_VBUSDIV5] = "vbusdiv5", [MT6370_CHAN_VBUSDIV2] = "vbusdiv2", ... ... [MT6370_CHAN_TEMP_JC] = "temp_jc", }; > > + "vbusdiv5", "vbusdiv2", "vsys", "vbat", > > + "ts_bat", "ibus", "ibat", "chg_vddp", > > + "temp_jc", > > +}; > > + > > +static int mt6370_adc_read_label(struct iio_dev *iio_dev, > > + struct iio_chan_spec const *chan, char *label) > > +{ > > + return snprintf(label, PAGE_SIZE, "%s\n", > > + mt6370_channel_labels[chan->channel]); > > +} > > + > > +static const struct iio_info mt6370_adc_iio_info = { > > + .read_raw = mt6370_adc_read_raw, > > + .read_label = mt6370_adc_read_label, > > +}; > > + > > +#define MT6370_ADC_CHAN(_idx, _type, _addr) { \ > > + .type = _type, \ > > + .channel = MT6370_CHAN_##_idx, \ > > + .address = _addr, \ > > + .scan_index = MT6370_CHAN_##_idx, \ > > + .indexed = 1, \ > > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > > + BIT(IIO_CHAN_INFO_SCALE) | \ > > + BIT(IIO_CHAN_INFO_OFFSET), \ > > See above. Only temp_jc channel should hav an offset. > OK! > > +} > > + > > +static const struct iio_chan_spec mt6370_adc_channels[] = { > > + MT6370_ADC_CHAN(VBUSDIV5, IIO_VOLTAGE, 1), > > + MT6370_ADC_CHAN(VBUSDIV2, IIO_VOLTAGE, 2), > > + MT6370_ADC_CHAN(VSYS, IIO_VOLTAGE, 3), > > + MT6370_ADC_CHAN(VBAT, IIO_VOLTAGE, 4), > > + MT6370_ADC_CHAN(TS_BAT, IIO_VOLTAGE, 6), > > + MT6370_ADC_CHAN(IBUS, IIO_CURRENT, 8), > > + MT6370_ADC_CHAN(IBAT, IIO_CURRENT, 9), > > + MT6370_ADC_CHAN(CHG_VDDP, IIO_VOLTAGE, 11), > > + MT6370_ADC_CHAN(TEMP_JC, IIO_TEMP, 12), > > +}; > > + > > +static int mt6370_adc_probe(struct platform_device *pdev) > > +{ > > + int ret; > > + struct mt6370_adc_data *priv; > > + struct regmap *regmap; > > + struct iio_dev *indio_dev; > > + > > + regmap = dev_get_regmap(pdev->dev.parent, NULL); > > + if (!regmap) { > > + dev_err(&pdev->dev, "Failed to get regmap\n"); > > + return -ENODEV; > > + } > > + > > + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv)); > > + if (!indio_dev) > > + return -ENOMEM; > > + > > + priv = iio_priv(indio_dev); > > + priv->dev = &pdev->dev; > > + priv->regmap = regmap; > > + mutex_init(&priv->lock); > > + > > + ret = regmap_write(priv->regmap, MT6370_REG_CHG_ADC, 0); > > + if (ret) { > > + dev_err(&pdev->dev, "Failed to reset adc\n"); > > + return ret; > > + } > > + > > + indio_dev->name = dev_name(&pdev->dev); > > What does this end up as? It's used for userspace ABI and should > correspond to the part number, "mt6370-adc" probably > appropriate in this case (I think it'll end up as simply "adc.x" > currently?) Normally we just hard code this in the driver for > whatever devices the driver supports. I got it, I will change this name to "mt6370-adc" in the next version! Thanks! > > > + indio_dev->info = &mt6370_adc_iio_info; > > + indio_dev->modes = INDIO_DIRECT_MODE; > > + indio_dev->channels = mt6370_adc_channels; > > + indio_dev->num_channels = ARRAY_SIZE(mt6370_adc_channels); > > + > > + return devm_iio_device_register(&pdev->dev, indio_dev); > > +} > > + > > +static const struct of_device_id mt6370_adc_of_id[] = { > > + { .compatible = "mediatek,mt6370-adc", }, > > + {} > > +}; > > +MODULE_DEVICE_TABLE(of, mt6370_adc_of_id); > > + > > +static struct platform_driver mt6370_adc_driver = { > > + .driver = { > > + .name = "mt6370-adc", > > + .of_match_table = mt6370_adc_of_id, > > + }, > > + .probe = mt6370_adc_probe, > > +}; > > +module_platform_driver(mt6370_adc_driver); > > + > > +MODULE_AUTHOR("ChiaEn Wu <chiaen_wu@richtek.com>"); > > +MODULE_DESCRIPTION("MT6370 ADC Drvier"); > > +MODULE_LICENSE("GPL v2"); > Best regards, ChiaEn Wu
> > > > > + > > > +#define MT6370_AICR_400MA 0x6 > > > +#define MT6370_ICHG_500MA 0x4 > > > +#define MT6370_ICHG_900MA 0x8 > > > + > > > +#define ADC_CONV_TIME_US 35000 > > > +#define ADC_CONV_POLLING_TIME 1000 > > > + > > > +struct mt6370_adc_data { > > > + struct device *dev; > > > + struct regmap *regmap; > > > + struct mutex lock; > > > > All locks need documentation. What is the scope of the lock? > > Looks like it protects device state when doing setup, wait for read, read > > cycles. > > This mutex lock is for preventing the different adc channel from being > read at the same time. > So, if I just change its name to adc_chan_lock or adc_lock and add the > comment for this mutex lock, does this change meet your requirement Yes > > > > > > +}; > > > + > > > +static int mt6370_adc_read_scale(struct mt6370_adc_data *priv, > > > + int chan, int *val1, int *val2) > > > +{ > > > + unsigned int reg_val; > > > + int ret; > > > + > > > + switch (chan) { > > > + case MT6370_CHAN_VBAT: > > > + case MT6370_CHAN_VSYS: > > > + case MT6370_CHAN_CHG_VDDP: > > > + *val1 = 5000; > > > > This seems very large. Voltages are in millivolts > > as per Documentation/ABI/testing/sysfs-bus-iio > > and this means each step is 5 volts. > > > > So value in mv is currently 5 * _raw > > > > OK, I got it. Also, I will add the ABI file in the next version. Thanks! Only add ABI documentation for anything non-standard. The documentation scripts really don't like repeats! > > > > +static const char * const mt6370_channel_labels[MT6370_CHAN_MAX] = { > > > > Perhaps define an enum with which to index this and the chan spec > > and hence ensure they end up matching. > > [vbusdiv5] = "vbusdiv5", etc > > > > Do you mean that I can refine this const char array to the following array?? > > static const char * const mt6370_channel_labels[MT6370_CHAN_MAX] = { > [MT6370_CHAN_VBUSDIV5] = "vbusdiv5", > [MT6370_CHAN_VBUSDIV2] = "vbusdiv2", > ... > ... > [MT6370_CHAN_TEMP_JC] = "temp_jc", > }; Yes thanks, Jonathan
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 71ab0a06aa82..d7932dd9b773 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -737,6 +737,15 @@ config MEDIATEK_MT6360_ADC is used in smartphones and tablets and supports a 11 channel general purpose ADC. +config MEDIATEK_MT6370_ADC + tristate "Mediatek MT6370 ADC driver" + depends on MFD_MT6370 + help + Say Y here to enable MT6370 ADC support. + Integrated for System Monitoring includes + is used in smartphones and tablets and supports a 9 channel + general purpose ADC. + config MEDIATEK_MT6577_AUXADC tristate "MediaTek AUXADC driver" depends on ARCH_MEDIATEK || COMPILE_TEST diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 39d806f6d457..0ce285c7e2d0 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -68,6 +68,7 @@ obj-$(CONFIG_MCP320X) += mcp320x.o obj-$(CONFIG_MCP3422) += mcp3422.o obj-$(CONFIG_MCP3911) += mcp3911.o obj-$(CONFIG_MEDIATEK_MT6360_ADC) += mt6360-adc.o +obj-$(CONFIG_MEDIATEK_MT6370_ADC) += mt6370-adc.o obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o obj-$(CONFIG_MESON_SARADC) += meson_saradc.o diff --git a/drivers/iio/adc/mt6370-adc.c b/drivers/iio/adc/mt6370-adc.c new file mode 100644 index 000000000000..3320ebca17ad --- /dev/null +++ b/drivers/iio/adc/mt6370-adc.c @@ -0,0 +1,257 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/iio/adc/mediatek,mt6370_adc.h> +#include <linux/bits.h> +#include <linux/bitfield.h> +#include <linux/iio/iio.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define MT6370_REG_CHG_CTRL3 0x113 /* AICR */ +#define MT6370_REG_CHG_CTRL7 0x117 /* ICHG */ +#define MT6370_REG_CHG_ADC 0x121 +#define MT6370_REG_ADC_DATA_H 0x14C + +#define MT6370_ADC_START_MASK BIT(0) +#define MT6370_ADC_IN_SEL_MASK GENMASK(7, 4) +#define MT6370_AICR_ICHG_MASK GENMASK(7, 2) + +#define MT6370_ADC_CHAN_SHIFT 4 + +#define MT6370_AICR_400MA 0x6 +#define MT6370_ICHG_500MA 0x4 +#define MT6370_ICHG_900MA 0x8 + +#define ADC_CONV_TIME_US 35000 +#define ADC_CONV_POLLING_TIME 1000 + +struct mt6370_adc_data { + struct device *dev; + struct regmap *regmap; + struct mutex lock; +}; + +static int mt6370_adc_read_channel(struct mt6370_adc_data *priv, int chan, + unsigned long addr, int *val) +{ + __be16 be_val; + unsigned int reg_val; + int ret; + + mutex_lock(&priv->lock); + + reg_val = MT6370_ADC_START_MASK | (addr << MT6370_ADC_CHAN_SHIFT); + ret = regmap_write(priv->regmap, MT6370_REG_CHG_ADC, reg_val); + if (ret) + goto adc_unlock; + + msleep(ADC_CONV_TIME_US / 1000); + + ret = regmap_read_poll_timeout(priv->regmap, + MT6370_REG_CHG_ADC, reg_val, + !(reg_val & MT6370_ADC_START_MASK), + ADC_CONV_POLLING_TIME, + ADC_CONV_TIME_US * 3); + if (ret) { + if (ret == -ETIMEDOUT) + dev_err(priv->dev, "Failed to wait adc conversion\n"); + goto adc_unlock; + } + + ret = regmap_raw_read(priv->regmap, MT6370_REG_ADC_DATA_H, + &be_val, sizeof(be_val)); + if (ret) + goto adc_unlock; + + *val = be16_to_cpu(be_val); + ret = IIO_VAL_INT; + +adc_unlock: + mutex_unlock(&priv->lock); + + return ret; +} + +static int mt6370_adc_read_scale(struct mt6370_adc_data *priv, + int chan, int *val1, int *val2) +{ + unsigned int reg_val; + int ret; + + switch (chan) { + case MT6370_CHAN_VBAT: + case MT6370_CHAN_VSYS: + case MT6370_CHAN_CHG_VDDP: + *val1 = 5000; + return IIO_VAL_INT; + case MT6370_CHAN_IBUS: + ret = regmap_read(priv->regmap, MT6370_REG_CHG_CTRL3, ®_val); + if (ret) + return ret; + + reg_val = FIELD_GET(MT6370_AICR_ICHG_MASK, reg_val); + if (reg_val < MT6370_AICR_400MA) + *val1 = 33500; + else + *val1 = 50000; + + return IIO_VAL_INT; + case MT6370_CHAN_IBAT: + ret = regmap_read(priv->regmap, MT6370_REG_CHG_CTRL7, ®_val); + if (ret) + return ret; + + reg_val = FIELD_GET(MT6370_AICR_ICHG_MASK, reg_val); + if (reg_val < MT6370_ICHG_500MA) + *val1 = 23750; + else if (reg_val >= MT6370_ICHG_500MA && + reg_val < MT6370_ICHG_900MA) + *val1 = 26800; + else + *val1 = 50000; + + return IIO_VAL_INT; + case MT6370_CHAN_VBUSDIV5: + *val1 = 25000; + return IIO_VAL_INT; + case MT6370_CHAN_VBUSDIV2: + *val1 = 50000; + return IIO_VAL_INT; + case MT6370_CHAN_TS_BAT: + *val1 = 25; + *val2 = 10000; + return IIO_VAL_FRACTIONAL; + case MT6370_CHAN_TEMP_JC: + *val1 = 2; + return IIO_VAL_INT; + } + + return -EINVAL; +} + +static int mt6370_adc_read_offset(struct mt6370_adc_data *priv, + int chan, int *val) +{ + *val = (chan == MT6370_CHAN_TEMP_JC) ? -20 : 0; + return IIO_VAL_INT; +} + +static int mt6370_adc_read_raw(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long mask) +{ + struct mt6370_adc_data *priv = iio_priv(iio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return mt6370_adc_read_channel(priv, chan->channel, + chan->address, val); + case IIO_CHAN_INFO_SCALE: + return mt6370_adc_read_scale(priv, chan->channel, val, val2); + case IIO_CHAN_INFO_OFFSET: + return mt6370_adc_read_offset(priv, chan->channel, val); + } + + return -EINVAL; +} + +static const char * const mt6370_channel_labels[MT6370_CHAN_MAX] = { + "vbusdiv5", "vbusdiv2", "vsys", "vbat", + "ts_bat", "ibus", "ibat", "chg_vddp", + "temp_jc", +}; + +static int mt6370_adc_read_label(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, char *label) +{ + return snprintf(label, PAGE_SIZE, "%s\n", + mt6370_channel_labels[chan->channel]); +} + +static const struct iio_info mt6370_adc_iio_info = { + .read_raw = mt6370_adc_read_raw, + .read_label = mt6370_adc_read_label, +}; + +#define MT6370_ADC_CHAN(_idx, _type, _addr) { \ + .type = _type, \ + .channel = MT6370_CHAN_##_idx, \ + .address = _addr, \ + .scan_index = MT6370_CHAN_##_idx, \ + .indexed = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_OFFSET), \ +} + +static const struct iio_chan_spec mt6370_adc_channels[] = { + MT6370_ADC_CHAN(VBUSDIV5, IIO_VOLTAGE, 1), + MT6370_ADC_CHAN(VBUSDIV2, IIO_VOLTAGE, 2), + MT6370_ADC_CHAN(VSYS, IIO_VOLTAGE, 3), + MT6370_ADC_CHAN(VBAT, IIO_VOLTAGE, 4), + MT6370_ADC_CHAN(TS_BAT, IIO_VOLTAGE, 6), + MT6370_ADC_CHAN(IBUS, IIO_CURRENT, 8), + MT6370_ADC_CHAN(IBAT, IIO_CURRENT, 9), + MT6370_ADC_CHAN(CHG_VDDP, IIO_VOLTAGE, 11), + MT6370_ADC_CHAN(TEMP_JC, IIO_TEMP, 12), +}; + +static int mt6370_adc_probe(struct platform_device *pdev) +{ + int ret; + struct mt6370_adc_data *priv; + struct regmap *regmap; + struct iio_dev *indio_dev; + + regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!regmap) { + dev_err(&pdev->dev, "Failed to get regmap\n"); + return -ENODEV; + } + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + priv = iio_priv(indio_dev); + priv->dev = &pdev->dev; + priv->regmap = regmap; + mutex_init(&priv->lock); + + ret = regmap_write(priv->regmap, MT6370_REG_CHG_ADC, 0); + if (ret) { + dev_err(&pdev->dev, "Failed to reset adc\n"); + return ret; + } + + indio_dev->name = dev_name(&pdev->dev); + indio_dev->info = &mt6370_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = mt6370_adc_channels; + indio_dev->num_channels = ARRAY_SIZE(mt6370_adc_channels); + + return devm_iio_device_register(&pdev->dev, indio_dev); +} + +static const struct of_device_id mt6370_adc_of_id[] = { + { .compatible = "mediatek,mt6370-adc", }, + {} +}; +MODULE_DEVICE_TABLE(of, mt6370_adc_of_id); + +static struct platform_driver mt6370_adc_driver = { + .driver = { + .name = "mt6370-adc", + .of_match_table = mt6370_adc_of_id, + }, + .probe = mt6370_adc_probe, +}; +module_platform_driver(mt6370_adc_driver); + +MODULE_AUTHOR("ChiaEn Wu <chiaen_wu@richtek.com>"); +MODULE_DESCRIPTION("MT6370 ADC Drvier"); +MODULE_LICENSE("GPL v2");