| Message ID | 20220526203500.847165-1-atishp@rivosinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | hw/riscv: virt: Generate fw_cfg DT node correctly | expand |
On Fri, May 27, 2022 at 6:35 AM Atish Patra <atishp@rivosinc.com> wrote: > > fw_cfg DT node is generated after the create_fdt without any check > if the DT is being loaded from the commandline. This results in > FDT_ERR_EXISTS error if dtb is loaded from the commandline. > > Generate fw_cfg node only if the DT is not loaded from the commandline. > > Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Alistair > --- > hw/riscv/virt.c | 28 ++++++++++++++++++---------- > 1 file changed, 18 insertions(+), 10 deletions(-) > > diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c > index c57617381517..07aeee3bf0c3 100644 > --- a/hw/riscv/virt.c > +++ b/hw/riscv/virt.c > @@ -975,6 +975,23 @@ static void create_fdt_flash(RISCVVirtState *s, const MemMapEntry *memmap) > g_free(name); > } > > +static void create_fdt_fw_cfg(RISCVVirtState *s, const MemMapEntry *memmap) > +{ > + char *nodename; > + MachineState *mc = MACHINE(s); > + hwaddr base = memmap[VIRT_FW_CFG].base; > + hwaddr size = memmap[VIRT_FW_CFG].size; > + > + nodename = g_strdup_printf("/fw-cfg@%" PRIx64, base); > + qemu_fdt_add_subnode(mc->fdt, nodename); > + qemu_fdt_setprop_string(mc->fdt, nodename, > + "compatible", "qemu,fw-cfg-mmio"); > + qemu_fdt_setprop_sized_cells(mc->fdt, nodename, "reg", > + 2, base, 2, size); > + qemu_fdt_setprop(mc->fdt, nodename, "dma-coherent", NULL, 0); > + g_free(nodename); > +} > + > static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap, > uint64_t mem_size, const char *cmdline, bool is_32_bit) > { > @@ -1023,6 +1040,7 @@ static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap, > create_fdt_rtc(s, memmap, irq_mmio_phandle); > > create_fdt_flash(s, memmap); > + create_fdt_fw_cfg(s, memmap); > > update_bootargs: > if (cmdline && *cmdline) { > @@ -1082,22 +1100,12 @@ static inline DeviceState *gpex_pcie_init(MemoryRegion *sys_mem, > static FWCfgState *create_fw_cfg(const MachineState *mc) > { > hwaddr base = virt_memmap[VIRT_FW_CFG].base; > - hwaddr size = virt_memmap[VIRT_FW_CFG].size; > FWCfgState *fw_cfg; > - char *nodename; > > fw_cfg = fw_cfg_init_mem_wide(base + 8, base, 8, base + 16, > &address_space_memory); > fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)mc->smp.cpus); > > - nodename = g_strdup_printf("/fw-cfg@%" PRIx64, base); > - qemu_fdt_add_subnode(mc->fdt, nodename); > - qemu_fdt_setprop_string(mc->fdt, nodename, > - "compatible", "qemu,fw-cfg-mmio"); > - qemu_fdt_setprop_sized_cells(mc->fdt, nodename, "reg", > - 2, base, 2, size); > - qemu_fdt_setprop(mc->fdt, nodename, "dma-coherent", NULL, 0); > - g_free(nodename); > return fw_cfg; > } > > -- > 2.25.1 > >
On Fri, May 27, 2022 at 6:35 AM Atish Patra <atishp@rivosinc.com> wrote: > > fw_cfg DT node is generated after the create_fdt without any check > if the DT is being loaded from the commandline. This results in > FDT_ERR_EXISTS error if dtb is loaded from the commandline. > > Generate fw_cfg node only if the DT is not loaded from the commandline. > > Signed-off-by: Atish Patra <atishp@rivosinc.com> Thanks! Applied to riscv-to-apply.next Alistair > --- > hw/riscv/virt.c | 28 ++++++++++++++++++---------- > 1 file changed, 18 insertions(+), 10 deletions(-) > > diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c > index c57617381517..07aeee3bf0c3 100644 > --- a/hw/riscv/virt.c > +++ b/hw/riscv/virt.c > @@ -975,6 +975,23 @@ static void create_fdt_flash(RISCVVirtState *s, const MemMapEntry *memmap) > g_free(name); > } > > +static void create_fdt_fw_cfg(RISCVVirtState *s, const MemMapEntry *memmap) > +{ > + char *nodename; > + MachineState *mc = MACHINE(s); > + hwaddr base = memmap[VIRT_FW_CFG].base; > + hwaddr size = memmap[VIRT_FW_CFG].size; > + > + nodename = g_strdup_printf("/fw-cfg@%" PRIx64, base); > + qemu_fdt_add_subnode(mc->fdt, nodename); > + qemu_fdt_setprop_string(mc->fdt, nodename, > + "compatible", "qemu,fw-cfg-mmio"); > + qemu_fdt_setprop_sized_cells(mc->fdt, nodename, "reg", > + 2, base, 2, size); > + qemu_fdt_setprop(mc->fdt, nodename, "dma-coherent", NULL, 0); > + g_free(nodename); > +} > + > static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap, > uint64_t mem_size, const char *cmdline, bool is_32_bit) > { > @@ -1023,6 +1040,7 @@ static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap, > create_fdt_rtc(s, memmap, irq_mmio_phandle); > > create_fdt_flash(s, memmap); > + create_fdt_fw_cfg(s, memmap); > > update_bootargs: > if (cmdline && *cmdline) { > @@ -1082,22 +1100,12 @@ static inline DeviceState *gpex_pcie_init(MemoryRegion *sys_mem, > static FWCfgState *create_fw_cfg(const MachineState *mc) > { > hwaddr base = virt_memmap[VIRT_FW_CFG].base; > - hwaddr size = virt_memmap[VIRT_FW_CFG].size; > FWCfgState *fw_cfg; > - char *nodename; > > fw_cfg = fw_cfg_init_mem_wide(base + 8, base, 8, base + 16, > &address_space_memory); > fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)mc->smp.cpus); > > - nodename = g_strdup_printf("/fw-cfg@%" PRIx64, base); > - qemu_fdt_add_subnode(mc->fdt, nodename); > - qemu_fdt_setprop_string(mc->fdt, nodename, > - "compatible", "qemu,fw-cfg-mmio"); > - qemu_fdt_setprop_sized_cells(mc->fdt, nodename, "reg", > - 2, base, 2, size); > - qemu_fdt_setprop(mc->fdt, nodename, "dma-coherent", NULL, 0); > - g_free(nodename); > return fw_cfg; > } > > -- > 2.25.1 > >
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index c57617381517..07aeee3bf0c3 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -975,6 +975,23 @@ static void create_fdt_flash(RISCVVirtState *s, const MemMapEntry *memmap) g_free(name); } +static void create_fdt_fw_cfg(RISCVVirtState *s, const MemMapEntry *memmap) +{ + char *nodename; + MachineState *mc = MACHINE(s); + hwaddr base = memmap[VIRT_FW_CFG].base; + hwaddr size = memmap[VIRT_FW_CFG].size; + + nodename = g_strdup_printf("/fw-cfg@%" PRIx64, base); + qemu_fdt_add_subnode(mc->fdt, nodename); + qemu_fdt_setprop_string(mc->fdt, nodename, + "compatible", "qemu,fw-cfg-mmio"); + qemu_fdt_setprop_sized_cells(mc->fdt, nodename, "reg", + 2, base, 2, size); + qemu_fdt_setprop(mc->fdt, nodename, "dma-coherent", NULL, 0); + g_free(nodename); +} + static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap, uint64_t mem_size, const char *cmdline, bool is_32_bit) { @@ -1023,6 +1040,7 @@ static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap, create_fdt_rtc(s, memmap, irq_mmio_phandle); create_fdt_flash(s, memmap); + create_fdt_fw_cfg(s, memmap); update_bootargs: if (cmdline && *cmdline) { @@ -1082,22 +1100,12 @@ static inline DeviceState *gpex_pcie_init(MemoryRegion *sys_mem, static FWCfgState *create_fw_cfg(const MachineState *mc) { hwaddr base = virt_memmap[VIRT_FW_CFG].base; - hwaddr size = virt_memmap[VIRT_FW_CFG].size; FWCfgState *fw_cfg; - char *nodename; fw_cfg = fw_cfg_init_mem_wide(base + 8, base, 8, base + 16, &address_space_memory); fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)mc->smp.cpus); - nodename = g_strdup_printf("/fw-cfg@%" PRIx64, base); - qemu_fdt_add_subnode(mc->fdt, nodename); - qemu_fdt_setprop_string(mc->fdt, nodename, - "compatible", "qemu,fw-cfg-mmio"); - qemu_fdt_setprop_sized_cells(mc->fdt, nodename, "reg", - 2, base, 2, size); - qemu_fdt_setprop(mc->fdt, nodename, "dma-coherent", NULL, 0); - g_free(nodename); return fw_cfg; }
fw_cfg DT node is generated after the create_fdt without any check if the DT is being loaded from the commandline. This results in FDT_ERR_EXISTS error if dtb is loaded from the commandline. Generate fw_cfg node only if the DT is not loaded from the commandline. Signed-off-by: Atish Patra <atishp@rivosinc.com> --- hw/riscv/virt.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-)