Message ID | 20220523104758.29531-19-granquet@baylibre.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | drm/mediatek: Add mt8195 DisplayPort driver | expand |
Hi, Guillaume: On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > From: Markus Schneider-Pargmann <msp@baylibre.com> > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > It supports the mt8195, the embedded DisplayPort units. It offers > DisplayPort 1.4 with up to 4 lanes. > > The driver creates a child device for the phy. The child device will > never exist without the parent being active. As they are sharing a > register range, the parent passes a regmap pointer to the child so > that > both can work with the same register range. The phy driver sets > device > data that is read by the parent to get the phy device that can be > used > to control the phy properties. > > This driver is based on an initial version by > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > --- > [snip] > + > +static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev) I don't have a DP spec. I find one in [1] but I'm not sure it's real spec or not. If it's real, in section 3.1.3.2, it describe: 3.1.3.2 Hot Plug/Unplug Detection One signal (HPD) is used by a device (an Upstream device) to detect that a Downstream port on the device has been connected to another device (the Downstream device). Implementation of HPD is optional for an embedded link configuration. At least a “trickle power” must be present both in the Upstream and Downstream devices for a Hot Plug event to be detected. I focus on the statement "Implementation of HPD is optional for an embedded link configuration". I'm not sure what does 'optional' mean. Does it mean eDP panel without HPD signal is possible? If so, I think driver should support eDP panel without HPD signal. Maybe I misunderstanding this spec. Please explain for me. Regards, CK [1] https://glenwing.github.io/docs/DP-1.2.pdf > +{ > + struct mtk_dp *mtk_dp = dev; > + int event; > + u8 buf[DP_RECEIVER_CAP_SIZE] = {}; > + > + event = mtk_dp_plug_state(mtk_dp) ? connector_status_connected > : > + connector_status_disc > onnected; > + > + if (event < 0) > + return IRQ_HANDLED; > + > + if (mtk_dp->drm_dev) { > + dev_info(mtk_dp->dev, "drm_helper_hpd_irq_event\n"); > + drm_helper_hpd_irq_event(mtk_dp->bridge.dev); > + } > + > + if (mtk_dp->train_info.cable_state_change) { > + mtk_dp->train_info.cable_state_change = false; > + > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_STARTUP; > + > + if (!mtk_dp->train_info.cable_plugged_in || > + !mtk_dp_plug_state(mtk_dp)) { > + mtk_dp_video_mute(mtk_dp, true); > + > + mtk_dp_initialize_priv_data(mtk_dp); > + mtk_dp_set_idle_pattern(mtk_dp, true); > + if (mtk_dp->has_fec) > + mtk_dp_fec_enable(mtk_dp, false); > + > + mtk_dp_update_bits(mtk_dp, > MTK_DP_TOP_PWR_STATE, > + DP_PWR_STATE_BANDGAP_TPLL, > + DP_PWR_STATE_MASK); > + } else { > + mtk_dp_update_bits(mtk_dp, > MTK_DP_TOP_PWR_STATE, > + DP_PWR_STATE_BANDGAP_TPLL_LA > NE, > + DP_PWR_STATE_MASK); > + drm_dp_read_dpcd_caps(&mtk_dp->aux, buf); > + mtk_dp->train_info.link_rate = > + min_t(int, mtk_dp->max_linkrate, > + buf[mtk_dp->max_linkrate]); > + mtk_dp->train_info.lane_count = > + min_t(int, mtk_dp->max_lanes, > + drm_dp_max_lane_count(buf)); > + } > + } > + > + if (mtk_dp->train_info.irq_status & MTK_DP_HPD_INTERRUPT) { > + dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n"); > + mtk_dp->train_info.irq_status &= ~MTK_DP_HPD_INTERRUPT; > + mtk_dp_hpd_sink_event(mtk_dp); > + } > + > + return IRQ_HANDLED; > +} > +
Hi, Guillaume: On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > From: Markus Schneider-Pargmann <msp@baylibre.com> > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > It supports the mt8195, the embedded DisplayPort units. It offers > DisplayPort 1.4 with up to 4 lanes. > > The driver creates a child device for the phy. The child device will > never exist without the parent being active. As they are sharing a > register range, the parent passes a regmap pointer to the child so > that > both can work with the same register range. The phy driver sets > device > data that is read by the parent to get the phy device that can be > used > to control the phy properties. > > This driver is based on an initial version by > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > [snip] > + > +static void mtk_dp_read_link_status(struct mtk_dp *mtk_dp, > + u8 > link_status[DP_LINK_STATUS_SIZE]) > +{ > + drm_dp_dpcd_read(&mtk_dp->aux, DP_LANE0_1_STATUS, link_status, > + DP_LINK_STATUS_SIZE); > +} > + > +static int mtk_dp_train_tps_1(struct mtk_dp *mtk_dp, > + u8 target_lane_count, int > *iteration_count, u8 *lane_adjust, int *status_control, u8 > *prev_lane_adjust) > +{ > + int ret; > + u8 val; > + u8 link_status[DP_LINK_STATUS_SIZE] = {}; > + > + ret = mtk_dp_training_set_scramble(mtk_dp, false); > + if (ret) > + return ret; > + > + if (*status_control == 0) { > + ret = mtk_dp_train_set_pattern(mtk_dp, 1); > + if (ret) > + return ret; > + > + val = DP_LINK_SCRAMBLING_DISABLE | > + DP_TRAINING_PATTERN_1; > + drm_dp_dpcd_writeb(&mtk_dp->aux, > + DP_TRAINING_PATTERN_SET, > + DP_LINK_SCRAMBLING_DISABLE | > + DP_TRAINING_PATTERN_1); > + drm_dp_dpcd_read(&mtk_dp->aux, > + DP_ADJUST_REQUEST_LANE0_1, > + lane_adjust, > + sizeof(*lane_adjust) * 2); > + > + mtk_dp_train_update_swing_pre(mtk_dp, > + target_lane_count, > lane_adjust); > + *status_control = 1; > + (*iteration_count)++; > + } > + > + drm_dp_link_train_clock_recovery_delay(&mtk_dp->aux, > + mtk_dp->rx_cap); > + mtk_dp_read_link_status(mtk_dp, link_status); drm_dp_dpcd_read_link_status(&mtk_dp->aux, link_status); > + > + if (drm_dp_clock_recovery_ok(link_status, > + target_lane_count)) { > + mtk_dp->train_info.cr_done = true; > + *iteration_count = 1; > + dev_dbg(mtk_dp->dev, "Link train CR pass\n"); > + return 0; > + } else if (*prev_lane_adjust == link_status[4]) { > + (*iteration_count)++; > + if (*prev_lane_adjust & > DP_ADJUST_VOLTAGE_SWING_LANE0_MASK) { > + dev_dbg(mtk_dp->dev, "Link train CQ fail\n"); > + return -EINVAL; > + } > + } else { > + *prev_lane_adjust = link_status[4]; > + } > + return -EAGAIN; > +} > + > +static int mtk_dp_train_tps_2_3(struct mtk_dp *mtk_dp, u8 > target_linkrate, > + u8 target_lane_count, int > *iteration_count, u8 *lane_adjust, int *status_control, u8 > *prev_lane_adjust) > +{ > + int ret; > + u8 val; > + u8 link_status[DP_LINK_STATUS_SIZE] = {}; > + > + if (*status_control == 1) { > + if (mtk_dp->train_info.tps4) { > + ret = mtk_dp_train_set_pattern(mtk_dp, 4); > + if (ret) > + return -EINVAL; > + > + val = DP_TRAINING_PATTERN_4; > + } else if (mtk_dp->train_info.tps3) { > + ret = mtk_dp_train_set_pattern(mtk_dp, 3); > + if (ret) > + return -EINVAL; > + > + val = DP_LINK_SCRAMBLING_DISABLE | > + DP_TRAINING_PATTERN_3; > + } else { > + ret = mtk_dp_train_set_pattern(mtk_dp, 2); > + if (ret) > + return -EINVAL; > + > + val = DP_LINK_SCRAMBLING_DISABLE | > + DP_TRAINING_PATTERN_2; > + } > + drm_dp_dpcd_writeb(&mtk_dp->aux, > + DP_TRAINING_PATTERN_SET, > + val); > + > + drm_dp_dpcd_read(&mtk_dp->aux, > + DP_ADJUST_REQUEST_LANE0_1, > + lane_adjust, > + sizeof(*lane_adjust) * 2); > + > + mtk_dp_train_update_swing_pre(mtk_dp, > + target_lane_count, > lane_adjust); > + *status_control = 2; > + (*iteration_count)++; > + } > + > + drm_dp_link_train_channel_eq_delay(&mtk_dp->aux, > + mtk_dp->rx_cap); > + > + mtk_dp_read_link_status(mtk_dp, link_status); drm_dp_dpcd_read_link_status(&mtk_dp->aux, link_status); Regards, CK > + > + if (!drm_dp_clock_recovery_ok(link_status, > + target_lane_count)) { > + mtk_dp->train_info.cr_done = false; > + mtk_dp->train_info.eq_done = false; > + dev_dbg(mtk_dp->dev, "Link train EQ fail\n"); > + return -EINVAL; > + } > + > + if (drm_dp_channel_eq_ok(link_status, > + target_lane_count)) { > + mtk_dp->train_info.eq_done = true; > + dev_dbg(mtk_dp->dev, "Link train EQ pass\n"); > + return 0; > + } > + > + if (*prev_lane_adjust == link_status[4]) > + (*iteration_count)++; > + else > + *prev_lane_adjust = link_status[4]; > + > + return -EAGAIN; > +} > + >
Hi, Guillaume: On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > From: Markus Schneider-Pargmann <msp@baylibre.com> > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > It supports the mt8195, the embedded DisplayPort units. It offers > DisplayPort 1.4 with up to 4 lanes. > > The driver creates a child device for the phy. The child device will > never exist without the parent being active. As they are sharing a > register range, the parent passes a regmap pointer to the child so > that > both can work with the same register range. The phy driver sets > device > data that is read by the parent to get the phy device that can be > used > to control the phy properties. > > This driver is based on an initial version by > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > --- > [snip] > + > +static irqreturn_t mtk_dp_hpd_isr_handler(struct mtk_dp *mtk_dp) > +{ > + bool connected; > + u16 swirq_status = mtk_dp_swirq_get_clear(mtk_dp); > + u8 hwirq_status = mtk_dp_hwirq_get_clear(mtk_dp); > + struct mtk_dp_train_info *train_info = &mtk_dp->train_info; > + > + train_info->irq_status |= hwirq_status | swirq_status; You mix software control variable and irq status here. Break each flag in irq_status to variables in train_info to decouple software control variable and irq status. > + > + if (!train_info->irq_status) > + return IRQ_HANDLED; > + > + connected = mtk_dp_plug_state(mtk_dp); > + if (connected || !train_info->cable_plugged_in) > + train_info->irq_status &= ~MTK_DP_HPD_DISCONNECT; > + else if (!connected || train_info->cable_plugged_in) > + train_info->irq_status &= ~MTK_DP_HPD_CONNECT; > + > + if (!(train_info->irq_status & > + (MTK_DP_HPD_CONNECT | MTK_DP_HPD_DISCONNECT))) > + return IRQ_HANDLED; > + > + if (train_info->irq_status & MTK_DP_HPD_CONNECT) { > + train_info->irq_status &= ~MTK_DP_HPD_CONNECT; > + train_info->cable_plugged_in = true; > + } else { > + train_info->irq_status &= ~MTK_DP_HPD_DISCONNECT; > + train_info->cable_plugged_in = false; > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_STARTUP; > + } > + train_info->cable_state_change = true; > + > + return IRQ_WAKE_THREAD; > +} > +
Hi, Rex: On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > From: Markus Schneider-Pargmann <msp@baylibre.com> > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > It supports the mt8195, the embedded DisplayPort units. It offers > DisplayPort 1.4 with up to 4 lanes. > > The driver creates a child device for the phy. The child device will > never exist without the parent being active. As they are sharing a > register range, the parent passes a regmap pointer to the child so > that > both can work with the same register range. The phy driver sets > device > data that is read by the parent to get the phy device that can be > used > to control the phy properties. > > This driver is based on an initial version by > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > --- [snip] > + > +static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev) > +{ > + struct mtk_dp *mtk_dp = dev; > + int event; > + u8 buf[DP_RECEIVER_CAP_SIZE] = {}; > + > + event = mtk_dp_plug_state(mtk_dp) ? connector_status_connected > : > + connector_status_disc > onnected; > + > + if (event < 0) event is always > 0, isn't it? > + return IRQ_HANDLED; > + > + if (mtk_dp->drm_dev) { > + dev_info(mtk_dp->dev, "drm_helper_hpd_irq_event\n"); > + drm_helper_hpd_irq_event(mtk_dp->bridge.dev); I think this ISR would come once. If bridge has not attached, the drm core would lost this event. Maybe you should enable eDP hardware after bridge attached or send this event when attached. > + } > + > + if (mtk_dp->train_info.cable_state_change) { Executing this thread imply cable_state_change = true, so drop cable_state_change. > + mtk_dp->train_info.cable_state_change = false; > + > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_STARTUP; > + > + if (!mtk_dp->train_info.cable_plugged_in || > + !mtk_dp_plug_state(mtk_dp)) { I do not like two variable to present one thing. If mtk_dp->train_info.cable_plugged_in = false and mtk_dp_plug_state(mtk_dp) = ture What does this mean? I think this mean 'now' is connected because cable_plugged_in is old information and mtk_dp_plug_state() is current information. But I would like to keep cable_plugged_in and drop mtk_dp_plug_state() because cable_plugged_in would be changed in isr and it would be the same as mtk_dp_plug_state(). Regards, CK > + mtk_dp_video_mute(mtk_dp, true); > + > + mtk_dp_initialize_priv_data(mtk_dp); > + mtk_dp_set_idle_pattern(mtk_dp, true); > + if (mtk_dp->has_fec) > + mtk_dp_fec_enable(mtk_dp, false); > + > + mtk_dp_update_bits(mtk_dp, > MTK_DP_TOP_PWR_STATE, > + DP_PWR_STATE_BANDGAP_TPLL, > + DP_PWR_STATE_MASK); > + } else { > + mtk_dp_update_bits(mtk_dp, > MTK_DP_TOP_PWR_STATE, > + DP_PWR_STATE_BANDGAP_TPLL_LA > NE, > + DP_PWR_STATE_MASK); > + drm_dp_read_dpcd_caps(&mtk_dp->aux, buf); > + mtk_dp->train_info.link_rate = > + min_t(int, mtk_dp->max_linkrate, > + buf[mtk_dp->max_linkrate]); > + mtk_dp->train_info.lane_count = > + min_t(int, mtk_dp->max_lanes, > + drm_dp_max_lane_count(buf)); > + } > + } > + > + if (mtk_dp->train_info.irq_status & MTK_DP_HPD_INTERRUPT) { > + dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n"); > + mtk_dp->train_info.irq_status &= ~MTK_DP_HPD_INTERRUPT; > + mtk_dp_hpd_sink_event(mtk_dp); > + } > + > + return IRQ_HANDLED; > +} > +
Hi, Rex: On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > From: Markus Schneider-Pargmann <msp@baylibre.com> > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > It supports the mt8195, the embedded DisplayPort units. It offers > DisplayPort 1.4 with up to 4 lanes. > > The driver creates a child device for the phy. The child device will > never exist without the parent being active. As they are sharing a > register range, the parent passes a regmap pointer to the child so > that > both can work with the same register range. The phy driver sets > device > data that is read by the parent to get the phy device that can be > used > to control the phy properties. > > This driver is based on an initial version by > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > --- [snip] > + > +static int mtk_dp_train_handler(struct mtk_dp *mtk_dp) > +{ > + bool training_done = false; > + short max_retry = 50; > + int ret = 0; > + > + do { > + switch (mtk_dp->train_state) { > + case MTK_DP_TRAIN_STATE_STARTUP: mtk_dp->train_state is initialized as MTK_DP_TRAIN_STATE_STARTUP even though HPD ISR does not exist. Does this mean HPD ISR is redundant? If HPD ISR is not redundant, create a new state MTK_DP_TRAIN_STATE_NONE for init state. > + mtk_dp_state_handler(mtk_dp); > + mtk_dp->train_state = > MTK_DP_TRAIN_STATE_CHECKCAP; > + break; > + > + case MTK_DP_TRAIN_STATE_CHECKCAP: > + if (mtk_dp_parse_capabilities(mtk_dp)) { > + mtk_dp->train_info.check_cap_count = 0; > + mtk_dp->train_state = > MTK_DP_TRAIN_STATE_CHECKEDID; > + } else { > + mtk_dp->train_info.check_cap_count++; > + > + if (mtk_dp->train_info.check_cap_count > > > + MTK_DP_CHECK_SINK_CAP_TIMEOUT_COUNT > ) { > + mtk_dp- > >train_info.check_cap_count = 0; > + mtk_dp->train_state = > MTK_DP_TRAIN_STATE_DPIDLE; > + ret = -ETIMEDOUT; > + } > + } > + break; > + > + case MTK_DP_TRAIN_STATE_CHECKEDID: > + mtk_dp->train_state = > MTK_DP_TRAIN_STATE_TRAINING_PRE; MTK_DP_TRAIN_STATE_CHECKEDID is a redundant state, drop it. > + break; > + > + case MTK_DP_TRAIN_STATE_TRAINING_PRE: > + mtk_dp_state_handler(mtk_dp); > + mtk_dp->train_state = > MTK_DP_TRAIN_STATE_TRAINING; > + break; > + > + case MTK_DP_TRAIN_STATE_TRAINING: > + ret = mtk_dp_train_start(mtk_dp); > + if (ret == 0) { > + mtk_dp_video_mute(mtk_dp, true); > + mtk_dp->train_state = > MTK_DP_TRAIN_STATE_NORMAL; > + mtk_dp_fec_enable(mtk_dp, mtk_dp- > >has_fec); > + } else if (ret != -EAGAIN) { > + mtk_dp->train_state = > MTK_DP_TRAIN_STATE_DPIDLE; > + } > + break; > + case MTK_DP_TRAIN_STATE_NORMAL: > + mtk_dp_state_handler(mtk_dp); > + training_done = true; > + break; > + case MTK_DP_TRAIN_STATE_DPIDLE: When would this case happen? Regards, CK > + break; > + default: > + break; > + } > + > + if (ret) { > + if (ret == -EAGAIN) > + continue; > + /* > + * If we get any other error number, it doesn't > + * make any sense to keep iterating. > + */ > + break; > + } > + } while (!training_done || --max_retry); > + > + return ret; > +}
Hi, Rex: On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > From: Markus Schneider-Pargmann <msp@baylibre.com> > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > It supports the mt8195, the embedded DisplayPort units. It offers > DisplayPort 1.4 with up to 4 lanes. > > The driver creates a child device for the phy. The child device will > never exist without the parent being active. As they are sharing a > register range, the parent passes a regmap pointer to the child so > that > both can work with the same register range. The phy driver sets > device > data that is read by the parent to get the phy device that can be > used > to control the phy properties. > > This driver is based on an initial version by > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > --- [snip] > + > +static ssize_t mtk_dp_aux_transfer(struct drm_dp_aux *mtk_aux, > + struct drm_dp_aux_msg *msg) > +{ > + struct mtk_dp *mtk_dp; > + bool is_read; > + u8 request; > + size_t accessed_bytes = 0; > + int ret = 0; > + > + mtk_dp = container_of(mtk_aux, struct mtk_dp, aux); > + > + if (!mtk_dp->train_info.cable_plugged_in || > + mtk_dp->train_info.irq_status & MTK_DP_HPD_DISCONNECT) { > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_CHECKCAP; Changing state here has no any effect, so drop this. > + return -EAGAIN; > + } > + > + switch (msg->request) { > + case DP_AUX_I2C_MOT: > + case DP_AUX_I2C_WRITE: > + case DP_AUX_NATIVE_WRITE: > + case DP_AUX_I2C_WRITE_STATUS_UPDATE: > + case DP_AUX_I2C_WRITE_STATUS_UPDATE | DP_AUX_I2C_MOT: > + request = msg->request & > ~DP_AUX_I2C_WRITE_STATUS_UPDATE; > + is_read = false; > + break; > + case DP_AUX_I2C_READ: > + case DP_AUX_NATIVE_READ: > + case DP_AUX_I2C_READ | DP_AUX_I2C_MOT: > + request = msg->request; > + is_read = true; > + break; > + default: > + drm_err(mtk_aux->drm_dev, "invalid aux cmd = %d\n", > + msg->request); > + return -EINVAL; > + } > + > + if (msg->size == 0) { > + ret = mtk_dp_aux_do_transfer(mtk_dp, is_read, request, > + msg->address + > accessed_bytes, > + msg->buffer + > accessed_bytes, 0); > + } else { > + while (accessed_bytes < msg->size) { > + size_t to_access = > + min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES, > + msg->size - accessed_bytes); > + > + ret = mtk_dp_aux_do_transfer(mtk_dp, > + is_read, request, > + msg->address + > accessed_bytes, > + msg->buffer + > accessed_bytes, > + to_access); > + > + if (ret) { > + drm_info(mtk_dp->drm_dev, > + "Failed to do AUX transfer: > %d\n", ret); > + break; > + } > + accessed_bytes += to_access; > + } > + } > + > + if (ret) { > + msg->reply = DP_AUX_NATIVE_REPLY_NACK | > DP_AUX_I2C_REPLY_NACK; > + return ret; > + } > + > + msg->reply = DP_AUX_NATIVE_REPLY_ACK | DP_AUX_I2C_REPLY_ACK; > + return msg->size; > +}
Hi, Rex: On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > From: Markus Schneider-Pargmann <msp@baylibre.com> > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > It supports the mt8195, the embedded DisplayPort units. It offers > DisplayPort 1.4 with up to 4 lanes. > > The driver creates a child device for the phy. The child device will > never exist without the parent being active. As they are sharing a > register range, the parent passes a regmap pointer to the child so > that > both can work with the same register range. The phy driver sets > device > data that is read by the parent to get the phy device that can be > used > to control the phy properties. > > This driver is based on an initial version by > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > --- [snip] > + > +static int mtk_dp_hpd_sink_event(struct mtk_dp *mtk_dp) > +{ > + ssize_t ret; > + u8 sink_count; > + bool locked; > + u8 link_status[DP_LINK_STATUS_SIZE] = {}; > + u32 sink_count_reg = DP_SINK_COUNT_ESI; > + u32 link_status_reg = DP_LANE0_1_STATUS; > + > + ret = drm_dp_dpcd_readb(&mtk_dp->aux, sink_count_reg, > &sink_count); > + if (ret < 0) { > + drm_err(mtk_dp->drm_dev, "Read sink count failed: > %ld\n", ret); > + return ret; > + } > + > + ret = drm_dp_dpcd_read(&mtk_dp->aux, link_status_reg, > link_status, > + sizeof(link_status)); > + if (!ret) { > + drm_err(mtk_dp->drm_dev, "Read link status failed: > %ld\n", > + ret); > + return ret; > + } > + > + locked = drm_dp_channel_eq_ok(link_status, > + mtk_dp->train_info.lane_count); > + if (!locked && mtk_dp->train_state > > MTK_DP_TRAIN_STATE_TRAINING_PRE) Before enter this function, mtk_dp->train_state is set to MTK_DP_TRAIN_STATE_STARTUP, so this never happen, drop this. > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_TRAINING_PRE; > + > + if (link_status[1] & DP_REMOTE_CONTROL_COMMAND_PENDING) > + drm_dp_dpcd_writeb(&mtk_dp->aux, > DP_DEVICE_SERVICE_IRQ_VECTOR, > + DP_REMOTE_CONTROL_COMMAND_PENDING); > + > + if (DP_GET_SINK_COUNT(sink_count) && > + (link_status[2] & DP_DOWNSTREAM_PORT_STATUS_CHANGED)) { > + mtk_dp->train_info.check_cap_count = 0; > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_CHECKEDID; Why change state from MTK_DP_TRAIN_STATE_STARTUP to MTK_DP_TRAIN_STATE_CHECKEDID? In mtk_dp_train_handler(), mtk_dp_parse_capabilities() is true then change to MTK_DP_TRAIN_STATE_CHECKEDID. Give a reason why these two are different. Regards, CK > + msleep(20); > + } > + > + return 0; > +} > +
Hi, Rex: On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > From: Markus Schneider-Pargmann <msp@baylibre.com> > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > It supports the mt8195, the embedded DisplayPort units. It offers > DisplayPort 1.4 with up to 4 lanes. > > The driver creates a child device for the phy. The child device will > never exist without the parent being active. As they are sharing a > register range, the parent passes a regmap pointer to the child so > that > both can work with the same register range. The phy driver sets > device > data that is read by the parent to get the phy device that can be > used > to control the phy properties. > > This driver is based on an initial version by > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > --- [snip] > + > +static void mtk_dp_state_handler(struct mtk_dp *mtk_dp) > +{ > + switch (mtk_dp->state) { Does mtk_dp->state has any relation with mtk_dp->train_state. If yes, mix mtk_dp->state and mtk_dp->train_state into one state. If no, move calling mtk_dp_state_handler() out of mtk_dp_train_handler(). Regards, CK > + case MTK_DP_STATE_INITIAL: > + mtk_dp_video_mute(mtk_dp, true); > + mtk_dp->state = MTK_DP_STATE_IDLE; > + break; > + > + case MTK_DP_STATE_IDLE: > + if (mtk_dp->train_state == MTK_DP_TRAIN_STATE_NORMAL) > + mtk_dp->state = MTK_DP_STATE_PREPARE; > + break; > + > + case MTK_DP_STATE_PREPARE: > + mtk_dp_video_config(mtk_dp); > + mtk_dp_video_enable(mtk_dp, true); > + > + mtk_dp->state = MTK_DP_STATE_NORMAL; > + break; > + > + case MTK_DP_STATE_NORMAL: > + if (mtk_dp->train_state != MTK_DP_TRAIN_STATE_NORMAL) { > + mtk_dp_video_mute(mtk_dp, true); > + mtk_dp->state = MTK_DP_STATE_IDLE; > + } > + break; > + > + default: > + break; > + } > +}
Hi, Rex: On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > From: Markus Schneider-Pargmann <msp@baylibre.com> > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > It supports the mt8195, the embedded DisplayPort units. It offers > DisplayPort 1.4 with up to 4 lanes. > > The driver creates a child device for the phy. The child device will > never exist without the parent being active. As they are sharing a > register range, the parent passes a regmap pointer to the child so > that > both can work with the same register range. The phy driver sets > device > data that is read by the parent to get the phy device that can be > used > to control the phy properties. > > This driver is based on an initial version by > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > --- [snip] > + > +static int mtk_dp_train_start(struct mtk_dp *mtk_dp) > +{ > + int ret = 0; > + u8 lane_count; > + u8 link_rate; > + u8 train_limit; > + u8 max_link_rate; > + u8 plug_wait; > + > + for (plug_wait = 7; !mtk_dp_plug_state(mtk_dp) && plug_wait > > 0; > + --plug_wait) > + /* Avoid short pulses on the HPD isr */ > + usleep_range(1000, 5000); > + if (plug_wait == 0) { > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_DPIDLE; After return, mtk_dp->train_state would be set to MTK_DP_TRAIN_STATE_DPIDLE, so drop this. > + return -ENODEV; > + } > + > + link_rate = mtk_dp->rx_cap[1]; > + lane_count = mtk_dp->rx_cap[2] & 0x1F; > + > + mtk_dp->train_info.link_rate = min(mtk_dp->max_linkrate, > link_rate); > + mtk_dp->train_info.lane_count = min(mtk_dp->max_lanes, > lane_count); > + link_rate = mtk_dp->train_info.link_rate; > + lane_count = mtk_dp->train_info.lane_count; > + > + switch (link_rate) { > + case MTK_DP_LINKRATE_RBR: > + case MTK_DP_LINKRATE_HBR: > + case MTK_DP_LINKRATE_HBR2: > + case MTK_DP_LINKRATE_HBR25: > + case MTK_DP_LINKRATE_HBR3: > + break; > + default: > + mtk_dp->train_info.link_rate = MTK_DP_LINKRATE_HBR3; > + break; > + }; > + > + max_link_rate = link_rate; > + for (train_limit = 6; train_limit > 0; train_limit--) { > + mtk_dp->train_info.cr_done = false; > + mtk_dp->train_info.eq_done = false; > + > + mtk_dp_train_change_mode(mtk_dp); > + ret = mtk_dp_train_flow(mtk_dp, link_rate, lane_count); > + if (ret) > + return ret; > + > + if (!mtk_dp->train_info.cr_done) { > + switch (link_rate) { > + case MTK_DP_LINKRATE_RBR: > + lane_count = lane_count / 2; > + link_rate = max_link_rate; > + if (lane_count == 0) { > + mtk_dp->train_state = > + MTK_DP_TRAIN_STATE_DPID > LE; After return, mtk_dp->train_state would be set to MTK_DP_TRAIN_STATE_DPIDLE, so drop this. Regards, CK > + return -EIO; > + } > + break; > + case MTK_DP_LINKRATE_HBR: > + link_rate = MTK_DP_LINKRATE_RBR; > + break; > + case MTK_DP_LINKRATE_HBR2: > + link_rate = MTK_DP_LINKRATE_HBR; > + break; > + case MTK_DP_LINKRATE_HBR3: > + link_rate = MTK_DP_LINKRATE_HBR2; > + break; > + default: > + return -EINVAL; > + }; > + } else if (!mtk_dp->train_info.eq_done) { > + if (lane_count == 0) > + return -EIO; > + > + lane_count /= 2; > + } else { > + break; > + } > + } > + > + if (train_limit == 0) > + return -ETIMEDOUT; > + > + return 0; > +} > +
Hi, Rex: On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > From: Markus Schneider-Pargmann <msp@baylibre.com> > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > It supports the mt8195, the embedded DisplayPort units. It offers > DisplayPort 1.4 with up to 4 lanes. > > The driver creates a child device for the phy. The child device will > never exist without the parent being active. As they are sharing a > register range, the parent passes a regmap pointer to the child so > that > both can work with the same register range. The phy driver sets > device > data that is read by the parent to get the phy device that can be > used > to control the phy properties. > > This driver is based on an initial version by > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > --- [snip] > + > +static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev) > +{ > + struct mtk_dp *mtk_dp = dev; > + int event; > + u8 buf[DP_RECEIVER_CAP_SIZE] = {}; > + > + event = mtk_dp_plug_state(mtk_dp) ? connector_status_connected > : > + connector_status_disc > onnected; > + > + if (event < 0) > + return IRQ_HANDLED; > + > + if (mtk_dp->drm_dev) { > + dev_info(mtk_dp->dev, "drm_helper_hpd_irq_event\n"); > + drm_helper_hpd_irq_event(mtk_dp->bridge.dev); > + } > + > + if (mtk_dp->train_info.cable_state_change) { > + mtk_dp->train_info.cable_state_change = false; > + > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_STARTUP; > + > + if (!mtk_dp->train_info.cable_plugged_in || > + !mtk_dp_plug_state(mtk_dp)) { > + mtk_dp_video_mute(mtk_dp, true); For eDP, when does 'unplug' happen? Explain this or move unplug processing to DP patch. Regards, CK > + > + mtk_dp_initialize_priv_data(mtk_dp); > + mtk_dp_set_idle_pattern(mtk_dp, true); > + if (mtk_dp->has_fec) > + mtk_dp_fec_enable(mtk_dp, false); > + > + mtk_dp_update_bits(mtk_dp, > MTK_DP_TOP_PWR_STATE, > + DP_PWR_STATE_BANDGAP_TPLL, > + DP_PWR_STATE_MASK); > + } else { > + mtk_dp_update_bits(mtk_dp, > MTK_DP_TOP_PWR_STATE, > + DP_PWR_STATE_BANDGAP_TPLL_LA > NE, > + DP_PWR_STATE_MASK); > + drm_dp_read_dpcd_caps(&mtk_dp->aux, buf); > + mtk_dp->train_info.link_rate = > + min_t(int, mtk_dp->max_linkrate, > + buf[mtk_dp->max_linkrate]); > + mtk_dp->train_info.lane_count = > + min_t(int, mtk_dp->max_lanes, > + drm_dp_max_lane_count(buf)); > + } > + } > + > + if (mtk_dp->train_info.irq_status & MTK_DP_HPD_INTERRUPT) { > + dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n"); > + mtk_dp->train_info.irq_status &= ~MTK_DP_HPD_INTERRUPT; > + mtk_dp_hpd_sink_event(mtk_dp); > + } > + > + return IRQ_HANDLED; > +} > +
On Tue, 2022-06-07 at 14:21 +0800, CK Hu wrote: > Hi, Rex: > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > > > It supports the mt8195, the embedded DisplayPort units. It offers > > DisplayPort 1.4 with up to 4 lanes. > > > > The driver creates a child device for the phy. The child device > > will > > never exist without the parent being active. As they are sharing a > > register range, the parent passes a regmap pointer to the child so > > that > > both can work with the same register range. The phy driver sets > > device > > data that is read by the parent to get the phy device that can be > > used > > to control the phy properties. > > > > This driver is based on an initial version by > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > --- > > [snip] > > > + > > +static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev) > > +{ > > + struct mtk_dp *mtk_dp = dev; > > + int event; > > + u8 buf[DP_RECEIVER_CAP_SIZE] = {}; > > + > > + event = mtk_dp_plug_state(mtk_dp) ? connector_status_connected > > : > > + connector_status_disc > > onnected; > > + > > + if (event < 0) > > event is always > 0, isn't it? > Hello CK, ok, I will move this to dp patch. > > + return IRQ_HANDLED; > > + > > + if (mtk_dp->drm_dev) { > > + dev_info(mtk_dp->dev, "drm_helper_hpd_irq_event\n"); > > + drm_helper_hpd_irq_event(mtk_dp->bridge.dev); > > I think this ISR would come once. If bridge has not attached, the drm > core would lost this event. Maybe you should enable eDP hardware > after > bridge attached or send this event when attached. > for edp patch, I will move it to (mtk_dp_bridge_attach). for dp patch, I will add it back. > > + } > > + > > + if (mtk_dp->train_info.cable_state_change) { > > Executing this thread imply cable_state_change = true, so drop > cable_state_change. > In mtk_dp_hpd_isr_handler(), there is another irq "MTK_DP_HPD_INTERRUPT" which means the sink devices give a interrupt to source device. it's not about connected status, so I think we still need this. > > + mtk_dp->train_info.cable_state_change = false; > > + > > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_STARTUP; > > + > > + if (!mtk_dp->train_info.cable_plugged_in || > > + !mtk_dp_plug_state(mtk_dp)) { > > I do not like two variable to present one thing. If > > mtk_dp->train_info.cable_plugged_in = false > and > mtk_dp_plug_state(mtk_dp) = ture > > What does this mean? I think this mean 'now' is connected because > cable_plugged_in is old information and mtk_dp_plug_state() is > current > information. > > But I would like to keep cable_plugged_in and drop > mtk_dp_plug_state() > because cable_plugged_in would be changed in isr and it would be the > same as mtk_dp_plug_state(). > > Regards, > CK > ok, I will drop this. BRs, Rex > > + mtk_dp_video_mute(mtk_dp, true); > > + > > + mtk_dp_initialize_priv_data(mtk_dp); > > + mtk_dp_set_idle_pattern(mtk_dp, true); > > + if (mtk_dp->has_fec) > > + mtk_dp_fec_enable(mtk_dp, false); > > + > > + mtk_dp_update_bits(mtk_dp, > > MTK_DP_TOP_PWR_STATE, > > + DP_PWR_STATE_BANDGAP_TPLL, > > + DP_PWR_STATE_MASK); > > + } else { > > + mtk_dp_update_bits(mtk_dp, > > MTK_DP_TOP_PWR_STATE, > > + DP_PWR_STATE_BANDGAP_TPLL_LA > > NE, > > + DP_PWR_STATE_MASK); > > + drm_dp_read_dpcd_caps(&mtk_dp->aux, buf); > > + mtk_dp->train_info.link_rate = > > + min_t(int, mtk_dp->max_linkrate, > > + buf[mtk_dp->max_linkrate]); > > + mtk_dp->train_info.lane_count = > > + min_t(int, mtk_dp->max_lanes, > > + drm_dp_max_lane_count(buf)); > > + } > > + } > > + > > + if (mtk_dp->train_info.irq_status & MTK_DP_HPD_INTERRUPT) { > > + dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n"); > > + mtk_dp->train_info.irq_status &= ~MTK_DP_HPD_INTERRUPT; > > + mtk_dp_hpd_sink_event(mtk_dp); > > + } > > + > > + return IRQ_HANDLED; > > +} > > + > >
On Tue, 2022-06-07 at 14:44 +0800, CK Hu wrote: > Hi, Rex: > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > > > It supports the mt8195, the embedded DisplayPort units. It offers > > DisplayPort 1.4 with up to 4 lanes. > > > > The driver creates a child device for the phy. The child device > > will > > never exist without the parent being active. As they are sharing a > > register range, the parent passes a regmap pointer to the child so > > that > > both can work with the same register range. The phy driver sets > > device > > data that is read by the parent to get the phy device that can be > > used > > to control the phy properties. > > > > This driver is based on an initial version by > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > --- > > [snip] > > > + > > +static int mtk_dp_train_handler(struct mtk_dp *mtk_dp) > > +{ > > + bool training_done = false; > > + short max_retry = 50; > > + int ret = 0; > > + > > + do { > > + switch (mtk_dp->train_state) { > > + case MTK_DP_TRAIN_STATE_STARTUP: > > mtk_dp->train_state is initialized as MTK_DP_TRAIN_STATE_STARTUP even > though HPD ISR does not exist. Does this mean HPD ISR is redundant? > If > HPD ISR is not redundant, create a new state MTK_DP_TRAIN_STATE_NONE > for init state. > Hello CK, I think we don't need MTK_DP_TRAIN_STATE_NONE. Because it's "DP_TRAIN_STATE" not "DP_STATE", I think it's ok if we start this state machine with "MTK_DP_TRAIN_STATE_STARTUP". > > + mtk_dp_state_handler(mtk_dp); > > + mtk_dp->train_state = > > MTK_DP_TRAIN_STATE_CHECKCAP; > > + break; > > + > > + case MTK_DP_TRAIN_STATE_CHECKCAP: > > + if (mtk_dp_parse_capabilities(mtk_dp)) { > > + mtk_dp->train_info.check_cap_count = 0; > > + mtk_dp->train_state = > > MTK_DP_TRAIN_STATE_CHECKEDID; > > + } else { > > + mtk_dp->train_info.check_cap_count++; > > + > > + if (mtk_dp->train_info.check_cap_count > > > > > > > + MTK_DP_CHECK_SINK_CAP_TIMEOUT_COUNT > > ) { > > + mtk_dp- > > > train_info.check_cap_count = 0; > > > > + mtk_dp->train_state = > > MTK_DP_TRAIN_STATE_DPIDLE; > > + ret = -ETIMEDOUT; > > + } > > + } > > + break; > > + > > + case MTK_DP_TRAIN_STATE_CHECKEDID: > > + mtk_dp->train_state = > > MTK_DP_TRAIN_STATE_TRAINING_PRE; > > MTK_DP_TRAIN_STATE_CHECKEDID is a redundant state, drop it. > > > + break; > > + > > + case MTK_DP_TRAIN_STATE_TRAINING_PRE: > > + mtk_dp_state_handler(mtk_dp); > > + mtk_dp->train_state = > > MTK_DP_TRAIN_STATE_TRAINING; > > + break; > > + > > + case MTK_DP_TRAIN_STATE_TRAINING: > > + ret = mtk_dp_train_start(mtk_dp); > > + if (ret == 0) { > > + mtk_dp_video_mute(mtk_dp, true); > > + mtk_dp->train_state = > > MTK_DP_TRAIN_STATE_NORMAL; > > + mtk_dp_fec_enable(mtk_dp, mtk_dp- > > > has_fec); > > > > + } else if (ret != -EAGAIN) { > > + mtk_dp->train_state = > > MTK_DP_TRAIN_STATE_DPIDLE; > > + } > > + break; > > + case MTK_DP_TRAIN_STATE_NORMAL: > > + mtk_dp_state_handler(mtk_dp); > > + training_done = true; > > + break; > > + case MTK_DP_TRAIN_STATE_DPIDLE: > > When would this case happen? > > Regards, > CK Yes, if it's disconnected if we are still training for dp. or failed to training min spec RBR. BRs, Rex > > > + break; > > + default: > > + break; > > + } > > + > > + if (ret) { > > + if (ret == -EAGAIN) > > + continue; > > + /* > > + * If we get any other error number, it doesn't > > + * make any sense to keep iterating. > > + */ > > + break; > > + } > > + } while (!training_done || --max_retry); > > + > > + return ret; > > +} > >
On Tue, 2022-06-07 at 15:30 +0800, CK Hu wrote: > Hi, Rex: > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > > > It supports the mt8195, the embedded DisplayPort units. It offers > > DisplayPort 1.4 with up to 4 lanes. > > > > The driver creates a child device for the phy. The child device > > will > > never exist without the parent being active. As they are sharing a > > register range, the parent passes a regmap pointer to the child so > > that > > both can work with the same register range. The phy driver sets > > device > > data that is read by the parent to get the phy device that can be > > used > > to control the phy properties. > > > > This driver is based on an initial version by > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > --- > > [snip] > > > + > > +static ssize_t mtk_dp_aux_transfer(struct drm_dp_aux *mtk_aux, > > + struct drm_dp_aux_msg *msg) > > +{ > > + struct mtk_dp *mtk_dp; > > + bool is_read; > > + u8 request; > > + size_t accessed_bytes = 0; > > + int ret = 0; > > + > > + mtk_dp = container_of(mtk_aux, struct mtk_dp, aux); > > + > > + if (!mtk_dp->train_info.cable_plugged_in || > > + mtk_dp->train_info.irq_status & MTK_DP_HPD_DISCONNECT) { > > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_CHECKCAP; > > Changing state here has no any effect, so drop this. > ok, I will drop it. > > + return -EAGAIN; > > + } > > + > > + switch (msg->request) { > > + case DP_AUX_I2C_MOT: > > + case DP_AUX_I2C_WRITE: > > + case DP_AUX_NATIVE_WRITE: > > + case DP_AUX_I2C_WRITE_STATUS_UPDATE: > > + case DP_AUX_I2C_WRITE_STATUS_UPDATE | DP_AUX_I2C_MOT: > > + request = msg->request & > > ~DP_AUX_I2C_WRITE_STATUS_UPDATE; > > + is_read = false; > > + break; > > + case DP_AUX_I2C_READ: > > + case DP_AUX_NATIVE_READ: > > + case DP_AUX_I2C_READ | DP_AUX_I2C_MOT: > > + request = msg->request; > > + is_read = true; > > + break; > > + default: > > + drm_err(mtk_aux->drm_dev, "invalid aux cmd = %d\n", > > + msg->request); > > + return -EINVAL; > > + } > > + > > + if (msg->size == 0) { > > + ret = mtk_dp_aux_do_transfer(mtk_dp, is_read, request, > > + msg->address + > > accessed_bytes, > > + msg->buffer + > > accessed_bytes, 0); > > + } else { > > + while (accessed_bytes < msg->size) { > > + size_t to_access = > > + min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES, > > + msg->size - accessed_bytes); > > + > > + ret = mtk_dp_aux_do_transfer(mtk_dp, > > + is_read, request, > > + msg->address + > > accessed_bytes, > > + msg->buffer + > > accessed_bytes, > > + to_access); > > + > > + if (ret) { > > + drm_info(mtk_dp->drm_dev, > > + "Failed to do AUX transfer: > > %d\n", ret); > > + break; > > + } > > + accessed_bytes += to_access; > > + } > > + } > > + > > + if (ret) { > > + msg->reply = DP_AUX_NATIVE_REPLY_NACK | > > DP_AUX_I2C_REPLY_NACK; > > + return ret; > > + } > > + > > + msg->reply = DP_AUX_NATIVE_REPLY_ACK | DP_AUX_I2C_REPLY_ACK; > > + return msg->size; > > +} > >
On Tue, 2022-06-07 at 16:12 +0800, CK Hu wrote: > Hi, Rex: > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > > > It supports the mt8195, the embedded DisplayPort units. It offers > > DisplayPort 1.4 with up to 4 lanes. > > > > The driver creates a child device for the phy. The child device > > will > > never exist without the parent being active. As they are sharing a > > register range, the parent passes a regmap pointer to the child so > > that > > both can work with the same register range. The phy driver sets > > device > > data that is read by the parent to get the phy device that can be > > used > > to control the phy properties. > > > > This driver is based on an initial version by > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > --- > > [snip] > > > + > > +static int mtk_dp_train_start(struct mtk_dp *mtk_dp) > > +{ > > + int ret = 0; > > + u8 lane_count; > > + u8 link_rate; > > + u8 train_limit; > > + u8 max_link_rate; > > + u8 plug_wait; > > + > > + for (plug_wait = 7; !mtk_dp_plug_state(mtk_dp) && plug_wait > > > 0; > > + --plug_wait) > > + /* Avoid short pulses on the HPD isr */ > > + usleep_range(1000, 5000); > > + if (plug_wait == 0) { > > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_DPIDLE; > > After return, mtk_dp->train_state would be set to > MTK_DP_TRAIN_STATE_DPIDLE, so drop this. > ok, I will do this. > > + return -ENODEV; > > + } > > + > > + link_rate = mtk_dp->rx_cap[1]; > > + lane_count = mtk_dp->rx_cap[2] & 0x1F; > > + > > + mtk_dp->train_info.link_rate = min(mtk_dp->max_linkrate, > > link_rate); > > + mtk_dp->train_info.lane_count = min(mtk_dp->max_lanes, > > lane_count); > > + link_rate = mtk_dp->train_info.link_rate; > > + lane_count = mtk_dp->train_info.lane_count; > > + > > + switch (link_rate) { > > + case MTK_DP_LINKRATE_RBR: > > + case MTK_DP_LINKRATE_HBR: > > + case MTK_DP_LINKRATE_HBR2: > > + case MTK_DP_LINKRATE_HBR25: > > + case MTK_DP_LINKRATE_HBR3: > > + break; > > + default: > > + mtk_dp->train_info.link_rate = MTK_DP_LINKRATE_HBR3; > > + break; > > + }; > > + > > + max_link_rate = link_rate; > > + for (train_limit = 6; train_limit > 0; train_limit--) { > > + mtk_dp->train_info.cr_done = false; > > + mtk_dp->train_info.eq_done = false; > > + > > + mtk_dp_train_change_mode(mtk_dp); > > + ret = mtk_dp_train_flow(mtk_dp, link_rate, lane_count); > > + if (ret) > > + return ret; > > + > > + if (!mtk_dp->train_info.cr_done) { > > + switch (link_rate) { > > + case MTK_DP_LINKRATE_RBR: > > + lane_count = lane_count / 2; > > + link_rate = max_link_rate; > > + if (lane_count == 0) { > > + mtk_dp->train_state = > > + MTK_DP_TRAIN_STATE_DPID > > LE; > > After return, mtk_dp->train_state would be set to > MTK_DP_TRAIN_STATE_DPIDLE, so drop this. > > Regards, > CK > ok. > > + return -EIO; > > + } > > + break; > > + case MTK_DP_LINKRATE_HBR: > > + link_rate = MTK_DP_LINKRATE_RBR; > > + break; > > + case MTK_DP_LINKRATE_HBR2: > > + link_rate = MTK_DP_LINKRATE_HBR; > > + break; > > + case MTK_DP_LINKRATE_HBR3: > > + link_rate = MTK_DP_LINKRATE_HBR2; > > + break; > > + default: > > + return -EINVAL; > > + }; > > + } else if (!mtk_dp->train_info.eq_done) { > > + if (lane_count == 0) > > + return -EIO; > > + > > + lane_count /= 2; > > + } else { > > + break; > > + } > > + } > > + > > + if (train_limit == 0) > > + return -ETIMEDOUT; > > + > > + return 0; > > +} > > + > >
Hi, Rex: On Tue, 2022-06-07 at 20:24 +0800, Rex-BC Chen wrote: > On Tue, 2022-06-07 at 14:21 +0800, CK Hu wrote: > > Hi, Rex: > > > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > > > > > It supports the mt8195, the embedded DisplayPort units. It offers > > > DisplayPort 1.4 with up to 4 lanes. > > > > > > The driver creates a child device for the phy. The child device > > > will > > > never exist without the parent being active. As they are sharing > > > a > > > register range, the parent passes a regmap pointer to the child > > > so > > > that > > > both can work with the same register range. The phy driver sets > > > device > > > data that is read by the parent to get the phy device that can be > > > used > > > to control the phy properties. > > > > > > This driver is based on an initial version by > > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > > --- > > > > [snip] > > > > > + > > > +static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev) > > > +{ > > > + struct mtk_dp *mtk_dp = dev; > > > + int event; > > > + u8 buf[DP_RECEIVER_CAP_SIZE] = {}; > > > + > > > + event = mtk_dp_plug_state(mtk_dp) ? connector_status_connected > > > : > > > + connector_status_disc > > > onnected; > > > + > > > + if (event < 0) > > > > event is always > 0, isn't it? > > > > Hello CK, > > ok, I will move this to dp patch. > > > > + return IRQ_HANDLED; > > > + > > > + if (mtk_dp->drm_dev) { > > > + dev_info(mtk_dp->dev, "drm_helper_hpd_irq_event\n"); > > > + drm_helper_hpd_irq_event(mtk_dp->bridge.dev); > > > > I think this ISR would come once. If bridge has not attached, the > > drm > > core would lost this event. Maybe you should enable eDP hardware > > after > > bridge attached or send this event when attached. > > > > for edp patch, I will move it to (mtk_dp_bridge_attach). > for dp patch, I will add it back. I find out that mtk_dp_poweron() is in top of mtk_dp_bridge_attach(). If move mtk_dp_poweron() to bottom of mtk_dp_bridge_attach(), mtk_dp- >drm_dev would not be NULL here. So we could drop this checking. > > > > + } > > > + > > > + if (mtk_dp->train_info.cable_state_change) { > > > > Executing this thread imply cable_state_change = true, so drop > > cable_state_change. > > > > In mtk_dp_hpd_isr_handler(), there is another irq > "MTK_DP_HPD_INTERRUPT" which means the sink devices give a interrupt > to > source device. it's not about connected status, so I think we still > need this. In bottom of mtk_dp_hpd_isr_handler(), the code is: + train_info->cable_state_change = true; + + return IRQ_WAKE_THREAD; This thread is called only when return IRQ_WAKE_THREAD, and before return IRQ_WAKE_THREAD, train_info->cable_state_change is always set to true. So in this thread, train_info->cable_state_change must be true. Regards, CK > > > > + mtk_dp->train_info.cable_state_change = false; > > > + > > > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_STARTUP; > > > + > > > + if (!mtk_dp->train_info.cable_plugged_in || > > > + !mtk_dp_plug_state(mtk_dp)) { > > > > I do not like two variable to present one thing. If > > > > mtk_dp->train_info.cable_plugged_in = false > > and > > mtk_dp_plug_state(mtk_dp) = ture > > > > What does this mean? I think this mean 'now' is connected because > > cable_plugged_in is old information and mtk_dp_plug_state() is > > current > > information. > > > > But I would like to keep cable_plugged_in and drop > > mtk_dp_plug_state() > > because cable_plugged_in would be changed in isr and it would be > > the > > same as mtk_dp_plug_state(). > > > > Regards, > > CK > > > > ok, I will drop this. > > BRs, > Rex > > > > + mtk_dp_video_mute(mtk_dp, true); > > > + > > > + mtk_dp_initialize_priv_data(mtk_dp); > > > + mtk_dp_set_idle_pattern(mtk_dp, true); > > > + if (mtk_dp->has_fec) > > > + mtk_dp_fec_enable(mtk_dp, false); > > > + > > > + mtk_dp_update_bits(mtk_dp, > > > MTK_DP_TOP_PWR_STATE, > > > + DP_PWR_STATE_BANDGAP_TPLL, > > > + DP_PWR_STATE_MASK); > > > + } else { > > > + mtk_dp_update_bits(mtk_dp, > > > MTK_DP_TOP_PWR_STATE, > > > + DP_PWR_STATE_BANDGAP_TPLL_LA > > > NE, > > > + DP_PWR_STATE_MASK); > > > + drm_dp_read_dpcd_caps(&mtk_dp->aux, buf); > > > + mtk_dp->train_info.link_rate = > > > + min_t(int, mtk_dp->max_linkrate, > > > + buf[mtk_dp->max_linkrate]); > > > + mtk_dp->train_info.lane_count = > > > + min_t(int, mtk_dp->max_lanes, > > > + drm_dp_max_lane_count(buf)); > > > + } > > > + } > > > + > > > + if (mtk_dp->train_info.irq_status & MTK_DP_HPD_INTERRUPT) { > > > + dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n"); > > > + mtk_dp->train_info.irq_status &= ~MTK_DP_HPD_INTERRUPT; > > > + mtk_dp_hpd_sink_event(mtk_dp); > > > + } > > > + > > > + return IRQ_HANDLED; > > > +} > > > + > > > > > >
Hi, Rex: On Tue, 2022-06-07 at 20:44 +0800, Rex-BC Chen wrote: > On Tue, 2022-06-07 at 14:44 +0800, CK Hu wrote: > > Hi, Rex: > > > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > > > > > It supports the mt8195, the embedded DisplayPort units. It offers > > > DisplayPort 1.4 with up to 4 lanes. > > > > > > The driver creates a child device for the phy. The child device > > > will > > > never exist without the parent being active. As they are sharing > > > a > > > register range, the parent passes a regmap pointer to the child > > > so > > > that > > > both can work with the same register range. The phy driver sets > > > device > > > data that is read by the parent to get the phy device that can be > > > used > > > to control the phy properties. > > > > > > This driver is based on an initial version by > > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > > --- > > > > [snip] > > > > > + > > > +static int mtk_dp_train_handler(struct mtk_dp *mtk_dp) > > > +{ > > > + bool training_done = false; > > > + short max_retry = 50; > > > + int ret = 0; > > > + > > > + do { > > > + switch (mtk_dp->train_state) { > > > + case MTK_DP_TRAIN_STATE_STARTUP: > > > > mtk_dp->train_state is initialized as MTK_DP_TRAIN_STATE_STARTUP > > even > > though HPD ISR does not exist. Does this mean HPD ISR is redundant? > > If > > HPD ISR is not redundant, create a new state > > MTK_DP_TRAIN_STATE_NONE > > for init state. > > > > Hello CK, > > I think we don't need MTK_DP_TRAIN_STATE_NONE. > Because it's "DP_TRAIN_STATE" not "DP_STATE", I think it's ok if we > start this state machine with "MTK_DP_TRAIN_STATE_STARTUP". The initial state is MTK_DP_TRAIN_STATE_STARTUP, and HPD thread would change state from MTK_DP_TRAIN_STATE_STARTUP to MTK_DP_TRAIN_STATE_STARTUP, this is redundant. So drop the state change in HPD thread. > > > > + mtk_dp_state_handler(mtk_dp); > > > + mtk_dp->train_state = > > > MTK_DP_TRAIN_STATE_CHECKCAP; > > > + break; > > > + > > > + case MTK_DP_TRAIN_STATE_CHECKCAP: > > > + if (mtk_dp_parse_capabilities(mtk_dp)) { > > > + mtk_dp->train_info.check_cap_count = 0; > > > + mtk_dp->train_state = > > > MTK_DP_TRAIN_STATE_CHECKEDID; > > > + } else { > > > + mtk_dp->train_info.check_cap_count++; > > > + > > > + if (mtk_dp->train_info.check_cap_count > > > > > > > > > > + MTK_DP_CHECK_SINK_CAP_TIMEOUT_COUNT > > > ) { > > > + mtk_dp- > > > > train_info.check_cap_count = 0; > > > > > > + mtk_dp->train_state = > > > MTK_DP_TRAIN_STATE_DPIDLE; > > > + ret = -ETIMEDOUT; > > > + } > > > + } > > > + break; > > > + > > > + case MTK_DP_TRAIN_STATE_CHECKEDID: > > > + mtk_dp->train_state = > > > MTK_DP_TRAIN_STATE_TRAINING_PRE; > > > > MTK_DP_TRAIN_STATE_CHECKEDID is a redundant state, drop it. > > > > > + break; > > > + > > > + case MTK_DP_TRAIN_STATE_TRAINING_PRE: > > > + mtk_dp_state_handler(mtk_dp); > > > + mtk_dp->train_state = > > > MTK_DP_TRAIN_STATE_TRAINING; > > > + break; > > > + > > > + case MTK_DP_TRAIN_STATE_TRAINING: > > > + ret = mtk_dp_train_start(mtk_dp); > > > + if (ret == 0) { > > > + mtk_dp_video_mute(mtk_dp, true); > > > + mtk_dp->train_state = > > > MTK_DP_TRAIN_STATE_NORMAL; > > > + mtk_dp_fec_enable(mtk_dp, mtk_dp- > > > > has_fec); > > > > > > + } else if (ret != -EAGAIN) { > > > + mtk_dp->train_state = > > > MTK_DP_TRAIN_STATE_DPIDLE; > > > + } > > > + break; > > > + case MTK_DP_TRAIN_STATE_NORMAL: > > > + mtk_dp_state_handler(mtk_dp); > > > + training_done = true; > > > + break; > > > + case MTK_DP_TRAIN_STATE_DPIDLE: > > > > When would this case happen? > > > > Regards, > > CK > > Yes, if it's disconnected if we are still training for dp. > or failed to training min spec RBR. I mean, every time state change to MTK_DP_TRAIN_STATE_DPIDLE, it would jump out of this loop and would not get into this loop, so this case would never get in. This is redundant, so remove this. Regards, CK > > BRs, > Rex > > > > > + break; > > > + default: > > > + break; > > > + } > > > + > > > + if (ret) { > > > + if (ret == -EAGAIN) > > > + continue; > > > + /* > > > + * If we get any other error number, it doesn't > > > + * make any sense to keep iterating. > > > + */ > > > + break; > > > + } > > > + } while (!training_done || --max_retry); > > > + > > > + return ret; > > > +} > > > > > >
Hi, Rex: On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > From: Markus Schneider-Pargmann <msp@baylibre.com> > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > It supports the mt8195, the embedded DisplayPort units. It offers > DisplayPort 1.4 with up to 4 lanes. > > The driver creates a child device for the phy. The child device will > never exist without the parent being active. As they are sharing a > register range, the parent passes a regmap pointer to the child so > that > both can work with the same register range. The phy driver sets > device > data that is read by the parent to get the phy device that can be > used > to control the phy properties. > > This driver is based on an initial version by > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > --- [snip] > + > +static bool mtk_dp_parse_capabilities(struct mtk_dp *mtk_dp) > +{ > + u8 buf[DP_RECEIVER_CAP_SIZE] = {}; > + u8 val; > + struct mtk_dp_train_info *train_info = &mtk_dp->train_info; > + > + if (!mtk_dp_plug_state(mtk_dp)) > + return false; > + > + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, > DP_SET_POWER_D0); > + /* Wait for power on */ > + usleep_range(2000, 5000); > + > + drm_dp_read_dpcd_caps(&mtk_dp->aux, buf); > + > + memcpy(mtk_dp->rx_cap, buf, min(sizeof(mtk_dp->rx_cap), > sizeof(buf))); sizeof(mtk_dp->rx_cap) is identical to sizeof(buf), so drm_dp_read_dpcd_caps(&mtk_dp->aux, mtk_dp->rx_cap); > + mtk_dp->rx_cap[DP_TRAINING_AUX_RD_INTERVAL] &= > DP_TRAINING_AUX_RD_MASK; > + > + train_info->link_rate = > + min_t(int, mtk_dp->max_linkrate, buf[mtk_dp- > >max_linkrate]); > + train_info->lane_count = > + min_t(int, mtk_dp->max_lanes, > drm_dp_max_lane_count(buf)); > + > + train_info->tps3 = drm_dp_tps3_supported(buf); > + train_info->tps4 = drm_dp_tps4_supported(buf); > + > + train_info->sink_ssc = > + !!(buf[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5); > + > + train_info->sink_ssc = false; What does these two statement do? Regards, CK > + > + drm_dp_dpcd_readb(&mtk_dp->aux, DP_MSTM_CAP, &val); > + if (val & DP_MST_CAP) { > + /* Clear DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 */ > + drm_dp_dpcd_readb(&mtk_dp->aux, > + DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0, > &val); > + if (val) > + drm_dp_dpcd_writeb(&mtk_dp->aux, > + DP_DEVICE_SERVICE_IRQ_VECTOR > _ESI0, > + val); > + } > + > + return true; > +} > +
On Wed, 2022-06-08 at 10:23 +0800, CK Hu wrote: > Hi, Rex: > > On Tue, 2022-06-07 at 20:24 +0800, Rex-BC Chen wrote: > > On Tue, 2022-06-07 at 14:21 +0800, CK Hu wrote: > > > Hi, Rex: > > > > > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > > > > > This patch adds a DisplayPort driver for the Mediatek mt8195 > > > > SoC. > > > > > > > > It supports the mt8195, the embedded DisplayPort units. It > > > > offers > > > > DisplayPort 1.4 with up to 4 lanes. > > > > > > > > The driver creates a child device for the phy. The child device > > > > will > > > > never exist without the parent being active. As they are > > > > sharing > > > > a > > > > register range, the parent passes a regmap pointer to the child > > > > so > > > > that > > > > both can work with the same register range. The phy driver sets > > > > device > > > > data that is read by the parent to get the phy device that can > > > > be > > > > used > > > > to control the phy properties. > > > > > > > > This driver is based on an initial version by > > > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > > > --- > > > > > > [snip] > > > > > > > + > > > > +static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev) > > > > +{ > > > > + struct mtk_dp *mtk_dp = dev; > > > > + int event; > > > > + u8 buf[DP_RECEIVER_CAP_SIZE] = {}; > > > > + > > > > + event = mtk_dp_plug_state(mtk_dp) ? > > > > connector_status_connected > > > > : > > > > + connector_sta > > > > tus_disc > > > > onnected; > > > > + > > > > + if (event < 0) > > > > > > event is always > 0, isn't it? > > > > > > > Hello CK, > > > > ok, I will move this to dp patch. > > > > > > + return IRQ_HANDLED; > > > > + > > > > + if (mtk_dp->drm_dev) { > > > > + dev_info(mtk_dp->dev, > > > > "drm_helper_hpd_irq_event\n"); > > > > + drm_helper_hpd_irq_event(mtk_dp->bridge.dev); > > > > > > I think this ISR would come once. If bridge has not attached, the > > > drm > > > core would lost this event. Maybe you should enable eDP hardware > > > after > > > bridge attached or send this event when attached. > > > > > > > for edp patch, I will move it to (mtk_dp_bridge_attach). > > for dp patch, I will add it back. > > I find out that mtk_dp_poweron() is in top of mtk_dp_bridge_attach(). > If move mtk_dp_poweron() to bottom of mtk_dp_bridge_attach(), mtk_dp- > > drm_dev would not be NULL here. So we could drop this checking. > > Hello CK, If we failed to setup phy(ret!=0), we alos need to deattach this bridge. I don't think it's a good idea just for remove this. > > > > + } > > > > + > > > > + if (mtk_dp->train_info.cable_state_change) { > > > > > > Executing this thread imply cable_state_change = true, so drop > > > cable_state_change. > > > > > > > In mtk_dp_hpd_isr_handler(), there is another irq > > "MTK_DP_HPD_INTERRUPT" which means the sink devices give a > > interrupt > > to > > source device. it's not about connected status, so I think we still > > need this. > > In bottom of mtk_dp_hpd_isr_handler(), the code is: > > + train_info->cable_state_change = true; > + > + return IRQ_WAKE_THREAD; > > This thread is called only when return IRQ_WAKE_THREAD, and before > return IRQ_WAKE_THREAD, train_info->cable_state_change is always set > to > true. So in this thread, train_info->cable_state_change must be true. > As mentioned, this irq handler function is not only for connected status. this could be return if this irq is interrupt from sink device. + if (!(train_info->irq_status & + (MTK_DP_HPD_CONNECT | MTK_DP_HPD_DISCONNECT))) + return IRQ_HANDLED; BRs, Bo-Chen > Regards, > CK > > > > > > > + mtk_dp->train_info.cable_state_change = false; > > > > + > > > > + mtk_dp->train_state = > > > > MTK_DP_TRAIN_STATE_STARTUP; > > > > + > > > > + if (!mtk_dp->train_info.cable_plugged_in || > > > > + !mtk_dp_plug_state(mtk_dp)) { > > > > > > I do not like two variable to present one thing. If > > > > > > mtk_dp->train_info.cable_plugged_in = false > > > and > > > mtk_dp_plug_state(mtk_dp) = ture > > > > > > What does this mean? I think this mean 'now' is connected because > > > cable_plugged_in is old information and mtk_dp_plug_state() is > > > current > > > information. > > > > > > But I would like to keep cable_plugged_in and drop > > > mtk_dp_plug_state() > > > because cable_plugged_in would be changed in isr and it would be > > > the > > > same as mtk_dp_plug_state(). > > > > > > Regards, > > > CK > > > > > > > ok, I will drop this. > > > > BRs, > > Rex > > > > > > + mtk_dp_video_mute(mtk_dp, true); > > > > + > > > > + mtk_dp_initialize_priv_data(mtk_dp); > > > > + mtk_dp_set_idle_pattern(mtk_dp, true); > > > > + if (mtk_dp->has_fec) > > > > + mtk_dp_fec_enable(mtk_dp, > > > > false); > > > > + > > > > + mtk_dp_update_bits(mtk_dp, > > > > MTK_DP_TOP_PWR_STATE, > > > > + DP_PWR_STATE_BANDGAP > > > > _TPLL, > > > > + DP_PWR_STATE_MASK); > > > > + } else { > > > > + mtk_dp_update_bits(mtk_dp, > > > > MTK_DP_TOP_PWR_STATE, > > > > + DP_PWR_STATE_BANDGAP > > > > _TPLL_LA > > > > NE, > > > > + DP_PWR_STATE_MASK); > > > > + drm_dp_read_dpcd_caps(&mtk_dp->aux, > > > > buf); > > > > + mtk_dp->train_info.link_rate = > > > > + min_t(int, mtk_dp- > > > > >max_linkrate, > > > > + buf[mtk_dp- > > > > >max_linkrate]); > > > > + mtk_dp->train_info.lane_count = > > > > + min_t(int, mtk_dp->max_lanes, > > > > + drm_dp_max_lane_count(buf > > > > )); > > > > + } > > > > + } > > > > + > > > > + if (mtk_dp->train_info.irq_status & > > > > MTK_DP_HPD_INTERRUPT) { > > > > + dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n"); > > > > + mtk_dp->train_info.irq_status &= > > > > ~MTK_DP_HPD_INTERRUPT; > > > > + mtk_dp_hpd_sink_event(mtk_dp); > > > > + } > > > > + > > > > + return IRQ_HANDLED; > > > > +} > > > > + > > > > > > > > > > > >
Hi, Rex: On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > From: Markus Schneider-Pargmann <msp@baylibre.com> > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > It supports the mt8195, the embedded DisplayPort units. It offers > DisplayPort 1.4 with up to 4 lanes. > > The driver creates a child device for the phy. The child device will > never exist without the parent being active. As they are sharing a > register range, the parent passes a regmap pointer to the child so > that > both can work with the same register range. The phy driver sets > device > data that is read by the parent to get the phy device that can be > used > to control the phy properties. > > This driver is based on an initial version by > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > --- [snip] > + > +static bool mtk_dp_set_swing_pre_emphasis(struct mtk_dp *mtk_dp, int > lane_num, > + int swing_val, int > preemphasis) The return value is never processed, so let this function to be void. Regards, CK > +{ > + int ret; > + > + u32 lane_shift = lane_num * DP_TX1_VOLT_SWING_SHIFT; > + > + if (lane_num < 0 || lane_num > 3) lane_num < 0 would not happen. lane_num > 3 only if device tree max lane is wrong. So I would like to checkout max lane when parsing device tree instead of checking here. > + return false; > + > + dev_dbg(mtk_dp->dev, > + "link training swing_val= 0x%x, preemphasis = 0x%x\n", > + swing_val, preemphasis); > + > + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_SWING_EMP, > + swing_val << (DP_TX0_VOLT_SWING_SHIFT > + lane_shift), > + DP_TX0_VOLT_SWING_MASK << lane_shift); > + if (ret) > + return ret; > + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_SWING_EMP, > + preemphasis << (DP_TX0_PRE_EMPH_SHIFT > + lane_shift), > + DP_TX0_PRE_EMPH_MASK << lane_shift); > + > + return !ret; > +} > +
On Wed, 2022-06-08 at 16:45 +0800, CK Hu wrote: > Hi, Rex: > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > > > It supports the mt8195, the embedded DisplayPort units. It offers > > DisplayPort 1.4 with up to 4 lanes. > > > > The driver creates a child device for the phy. The child device > > will > > never exist without the parent being active. As they are sharing a > > register range, the parent passes a regmap pointer to the child so > > that > > both can work with the same register range. The phy driver sets > > device > > data that is read by the parent to get the phy device that can be > > used > > to control the phy properties. > > > > This driver is based on an initial version by > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > --- > > [snip] > > > + > > +static bool mtk_dp_set_swing_pre_emphasis(struct mtk_dp *mtk_dp, > > int > > lane_num, > > + int swing_val, int > > preemphasis) > > The return value is never processed, so let this function to be void. > > Regards, > CK > Hello CK, ok, I will drop this. Actually, I change "mtk_dp_write", "mtk_dp_update_bits" and "mtk_dp_bulk_16bit_write" to return void. I don't think we need to handle the issue that we failed to set registers. If we failed to set register, it's because hw is not enable. Therefore, I drop this and we can reduce many lines of codes. BRs, Bo-Chen > > +{ > > + int ret; > > + > > + u32 lane_shift = lane_num * DP_TX1_VOLT_SWING_SHIFT; > > + > > + if (lane_num < 0 || lane_num > 3) > > lane_num < 0 would not happen. lane_num > 3 only if device tree max > lane is wrong. So I would like to checkout max lane when parsing > device > tree instead of checking here. > > + return false; > > + > > + dev_dbg(mtk_dp->dev, > > + "link training swing_val= 0x%x, preemphasis = 0x%x\n", > > + swing_val, preemphasis); > > + > > + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_SWING_EMP, > > + swing_val << (DP_TX0_VOLT_SWING_SHIFT > > + lane_shift), > > + DP_TX0_VOLT_SWING_MASK << lane_shift); > > + if (ret) > > + return ret; > > + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_SWING_EMP, > > + preemphasis << (DP_TX0_PRE_EMPH_SHIFT > > + lane_shift), > > + DP_TX0_PRE_EMPH_MASK << lane_shift); > > + > > + return !ret; > > +} > > + > >
Hi, Rex: On Wed, 2022-06-08 at 16:43 +0800, Rex-BC Chen wrote: > On Wed, 2022-06-08 at 10:23 +0800, CK Hu wrote: > > Hi, Rex: > > > > On Tue, 2022-06-07 at 20:24 +0800, Rex-BC Chen wrote: > > > On Tue, 2022-06-07 at 14:21 +0800, CK Hu wrote: > > > > Hi, Rex: > > > > > > > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > > > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > > > > > > > This patch adds a DisplayPort driver for the Mediatek mt8195 > > > > > SoC. > > > > > > > > > > It supports the mt8195, the embedded DisplayPort units. It > > > > > offers > > > > > DisplayPort 1.4 with up to 4 lanes. > > > > > > > > > > The driver creates a child device for the phy. The child > > > > > device > > > > > will > > > > > never exist without the parent being active. As they are > > > > > sharing > > > > > a > > > > > register range, the parent passes a regmap pointer to the > > > > > child > > > > > so > > > > > that > > > > > both can work with the same register range. The phy driver > > > > > sets > > > > > device > > > > > data that is read by the parent to get the phy device that > > > > > can > > > > > be > > > > > used > > > > > to control the phy properties. > > > > > > > > > > This driver is based on an initial version by > > > > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > > > > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > > > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > > > > --- > > > > > > > > [snip] > > > > > > > > > + > > > > > +static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void > > > > > *dev) > > > > > +{ > > > > > + struct mtk_dp *mtk_dp = dev; > > > > > + int event; > > > > > + u8 buf[DP_RECEIVER_CAP_SIZE] = {}; > > > > > + > > > > > + event = mtk_dp_plug_state(mtk_dp) ? > > > > > connector_status_connected > > > > > : > > > > > + connector_sta > > > > > tus_disc > > > > > onnected; > > > > > + > > > > > + if (event < 0) > > > > > > > > event is always > 0, isn't it? > > > > > > > > > > Hello CK, > > > > > > ok, I will move this to dp patch. > > > > > > > > + return IRQ_HANDLED; > > > > > + > > > > > + if (mtk_dp->drm_dev) { > > > > > + dev_info(mtk_dp->dev, > > > > > "drm_helper_hpd_irq_event\n"); > > > > > + drm_helper_hpd_irq_event(mtk_dp->bridge.dev); > > > > > > > > I think this ISR would come once. If bridge has not attached, > > > > the > > > > drm > > > > core would lost this event. Maybe you should enable eDP > > > > hardware > > > > after > > > > bridge attached or send this event when attached. > > > > > > > > > > for edp patch, I will move it to (mtk_dp_bridge_attach). > > > for dp patch, I will add it back. > > > > I find out that mtk_dp_poweron() is in top of > > mtk_dp_bridge_attach(). > > If move mtk_dp_poweron() to bottom of mtk_dp_bridge_attach(), > > mtk_dp- > > > drm_dev would not be NULL here. So we could drop this checking. > > > > > Hello CK, > > If we failed to setup phy(ret!=0), we alos need to deattach this > bridge. > I don't think it's a good idea just for remove this. OK, move mtk_dp_hwirq_enable() out of mtk_dp_poweron() and to the bottom of mtk_dp_bridge_attach(). irq is not part of power. > > > > > > + } > > > > > + > > > > > + if (mtk_dp->train_info.cable_state_change) { > > > > > > > > Executing this thread imply cable_state_change = true, so drop > > > > cable_state_change. > > > > > > > > > > In mtk_dp_hpd_isr_handler(), there is another irq > > > "MTK_DP_HPD_INTERRUPT" which means the sink devices give a > > > interrupt > > > to > > > source device. it's not about connected status, so I think we > > > still > > > need this. > > > > In bottom of mtk_dp_hpd_isr_handler(), the code is: > > > > + train_info->cable_state_change = true; > > + > > + return IRQ_WAKE_THREAD; > > > > This thread is called only when return IRQ_WAKE_THREAD, and before > > return IRQ_WAKE_THREAD, train_info->cable_state_change is always > > set > > to > > true. So in this thread, train_info->cable_state_change must be > > true. > > > > As mentioned, this irq handler function is not only for connected > status. > > this could be return if this irq is interrupt from sink device. > + if (!(train_info->irq_status & > + (MTK_DP_HPD_CONNECT | MTK_DP_HPD_DISCONNECT))) > + return IRQ_HANDLED; According to [1], return IRQ_WAKE_THREAD to wake up thread. So return IRQ_HANDLED would not wake up thread. [1] https://www.kernel.org/doc/htmldocs/kernel-api/API-request-threaded-irq.html Regards, CK > > BRs, > Bo-Chen > > Regards, > > CK > > > > > > > > > > + mtk_dp->train_info.cable_state_change = false; > > > > > + > > > > > + mtk_dp->train_state = > > > > > MTK_DP_TRAIN_STATE_STARTUP; > > > > > + > > > > > + if (!mtk_dp->train_info.cable_plugged_in || > > > > > + !mtk_dp_plug_state(mtk_dp)) { > > > > > > > > I do not like two variable to present one thing. If > > > > > > > > mtk_dp->train_info.cable_plugged_in = false > > > > and > > > > mtk_dp_plug_state(mtk_dp) = ture > > > > > > > > What does this mean? I think this mean 'now' is connected > > > > because > > > > cable_plugged_in is old information and mtk_dp_plug_state() is > > > > current > > > > information. > > > > > > > > But I would like to keep cable_plugged_in and drop > > > > mtk_dp_plug_state() > > > > because cable_plugged_in would be changed in isr and it would > > > > be > > > > the > > > > same as mtk_dp_plug_state(). > > > > > > > > Regards, > > > > CK > > > > > > > > > > ok, I will drop this. > > > > > > BRs, > > > Rex > > > > > > > > + mtk_dp_video_mute(mtk_dp, true); > > > > > + > > > > > + mtk_dp_initialize_priv_data(mtk_dp); > > > > > + mtk_dp_set_idle_pattern(mtk_dp, true); > > > > > + if (mtk_dp->has_fec) > > > > > + mtk_dp_fec_enable(mtk_dp, > > > > > false); > > > > > + > > > > > + mtk_dp_update_bits(mtk_dp, > > > > > MTK_DP_TOP_PWR_STATE, > > > > > + DP_PWR_STATE_BANDGAP > > > > > _TPLL, > > > > > + DP_PWR_STATE_MASK); > > > > > + } else { > > > > > + mtk_dp_update_bits(mtk_dp, > > > > > MTK_DP_TOP_PWR_STATE, > > > > > + DP_PWR_STATE_BANDGAP > > > > > _TPLL_LA > > > > > NE, > > > > > + DP_PWR_STATE_MASK); > > > > > + drm_dp_read_dpcd_caps(&mtk_dp->aux, > > > > > buf); > > > > > + mtk_dp->train_info.link_rate = > > > > > + min_t(int, mtk_dp- > > > > > > max_linkrate, > > > > > > > > > > + buf[mtk_dp- > > > > > > max_linkrate]); > > > > > > > > > > + mtk_dp->train_info.lane_count = > > > > > + min_t(int, mtk_dp->max_lanes, > > > > > + drm_dp_max_lane_count(buf > > > > > )); > > > > > + } > > > > > + } > > > > > + > > > > > + if (mtk_dp->train_info.irq_status & > > > > > MTK_DP_HPD_INTERRUPT) { > > > > > + dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n"); > > > > > + mtk_dp->train_info.irq_status &= > > > > > ~MTK_DP_HPD_INTERRUPT; > > > > > + mtk_dp_hpd_sink_event(mtk_dp); > > > > > + } > > > > > + > > > > > + return IRQ_HANDLED; > > > > > +} > > > > > + > > > > > > > > > > > > > > > > > > > >
On Tue, 2022-06-07 at 15:47 +0800, CK Hu wrote: > Hi, Rex: > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > > > It supports the mt8195, the embedded DisplayPort units. It offers > > DisplayPort 1.4 with up to 4 lanes. > > > > The driver creates a child device for the phy. The child device > > will > > never exist without the parent being active. As they are sharing a > > register range, the parent passes a regmap pointer to the child so > > that > > both can work with the same register range. The phy driver sets > > device > > data that is read by the parent to get the phy device that can be > > used > > to control the phy properties. > > > > This driver is based on an initial version by > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > --- > > [snip] > > > + > > +static int mtk_dp_hpd_sink_event(struct mtk_dp *mtk_dp) > > +{ > > + ssize_t ret; > > + u8 sink_count; > > + bool locked; > > + u8 link_status[DP_LINK_STATUS_SIZE] = {}; > > + u32 sink_count_reg = DP_SINK_COUNT_ESI; > > + u32 link_status_reg = DP_LANE0_1_STATUS; > > + > > + ret = drm_dp_dpcd_readb(&mtk_dp->aux, sink_count_reg, > > &sink_count); > > + if (ret < 0) { > > + drm_err(mtk_dp->drm_dev, "Read sink count failed: > > %ld\n", ret); > > + return ret; > > + } > > + > > + ret = drm_dp_dpcd_read(&mtk_dp->aux, link_status_reg, > > link_status, > > + sizeof(link_status)); > > + if (!ret) { > > + drm_err(mtk_dp->drm_dev, "Read link status failed: > > %ld\n", > > + ret); > > + return ret; > > + } > > + > > + locked = drm_dp_channel_eq_ok(link_status, > > + mtk_dp->train_info.lane_count); > > + if (!locked && mtk_dp->train_state > > > MTK_DP_TRAIN_STATE_TRAINING_PRE) > > Before enter this function, mtk_dp->train_state is set to > MTK_DP_TRAIN_STATE_STARTUP, so this never happen, drop this. > The interrupt from sink device could come any time. Why it's impossible? > > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_TRAINING_PRE; > > + > > + if (link_status[1] & DP_REMOTE_CONTROL_COMMAND_PENDING) > > + drm_dp_dpcd_writeb(&mtk_dp->aux, > > DP_DEVICE_SERVICE_IRQ_VECTOR, > > + DP_REMOTE_CONTROL_COMMAND_PENDING); > > + > > + if (DP_GET_SINK_COUNT(sink_count) && > > + (link_status[2] & DP_DOWNSTREAM_PORT_STATUS_CHANGED)) { > > + mtk_dp->train_info.check_cap_count = 0; > > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_CHECKEDID; > > Why change state from MTK_DP_TRAIN_STATE_STARTUP to > MTK_DP_TRAIN_STATE_CHECKEDID? In mtk_dp_train_handler(), > mtk_dp_parse_capabilities() is true then change to > MTK_DP_TRAIN_STATE_CHECKEDID. Give a reason why these two are > different. > > Regards, > CK > I will drop this and drop state of MTK_DP_TRAIN_STATE_CHECKEDID. MTK_DP_TRAIN_STATE_CHECKEDID is only used for audio. We can check enable status in another place. BRs, Bo-Chen > > + msleep(20); > > + } > > + > > + return 0; > > +} > > + > >
On Wed, 2022-06-08 at 17:15 +0800, CK Hu wrote: > Hi, Rex: > > On Wed, 2022-06-08 at 16:43 +0800, Rex-BC Chen wrote: > > On Wed, 2022-06-08 at 10:23 +0800, CK Hu wrote: > > > Hi, Rex: > > > > > > On Tue, 2022-06-07 at 20:24 +0800, Rex-BC Chen wrote: > > > > On Tue, 2022-06-07 at 14:21 +0800, CK Hu wrote: > > > > > Hi, Rex: > > > > > > > > > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > > > > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > > > > > > > > > This patch adds a DisplayPort driver for the Mediatek > > > > > > mt8195 > > > > > > SoC. > > > > > > > > > > > > It supports the mt8195, the embedded DisplayPort units. It > > > > > > offers > > > > > > DisplayPort 1.4 with up to 4 lanes. > > > > > > > > > > > > The driver creates a child device for the phy. The child > > > > > > device > > > > > > will > > > > > > never exist without the parent being active. As they are > > > > > > sharing > > > > > > a > > > > > > register range, the parent passes a regmap pointer to the > > > > > > child > > > > > > so > > > > > > that > > > > > > both can work with the same register range. The phy driver > > > > > > sets > > > > > > device > > > > > > data that is read by the parent to get the phy device that > > > > > > can > > > > > > be > > > > > > used > > > > > > to control the phy properties. > > > > > > > > > > > > This driver is based on an initial version by > > > > > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > > > > > > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > > > > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > > > > > --- > > > > > > > > > > [snip] > > > > > > > > > > > + > > > > > > +static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void > > > > > > *dev) > > > > > > +{ > > > > > > + struct mtk_dp *mtk_dp = dev; > > > > > > + int event; > > > > > > + u8 buf[DP_RECEIVER_CAP_SIZE] = {}; > > > > > > + > > > > > > + event = mtk_dp_plug_state(mtk_dp) ? > > > > > > connector_status_connected > > > > > > : > > > > > > + connector_sta > > > > > > tus_disc > > > > > > onnected; > > > > > > + > > > > > > + if (event < 0) > > > > > > > > > > event is always > 0, isn't it? > > > > > > > > > > > > > Hello CK, > > > > > > > > ok, I will move this to dp patch. > > > > > > > > > > + return IRQ_HANDLED; > > > > > > + > > > > > > + if (mtk_dp->drm_dev) { > > > > > > + dev_info(mtk_dp->dev, > > > > > > "drm_helper_hpd_irq_event\n"); > > > > > > + drm_helper_hpd_irq_event(mtk_dp->bridge.dev); > > > > > > > > > > I think this ISR would come once. If bridge has not attached, > > > > > the > > > > > drm > > > > > core would lost this event. Maybe you should enable eDP > > > > > hardware > > > > > after > > > > > bridge attached or send this event when attached. > > > > > > > > > > > > > for edp patch, I will move it to (mtk_dp_bridge_attach). > > > > for dp patch, I will add it back. > > > > > > I find out that mtk_dp_poweron() is in top of > > > mtk_dp_bridge_attach(). > > > If move mtk_dp_poweron() to bottom of mtk_dp_bridge_attach(), > > > mtk_dp- > > > > drm_dev would not be NULL here. So we could drop this checking. > > > > > > > > Hello CK, > > > > If we failed to setup phy(ret!=0), we alos need to deattach this > > bridge. > > I don't think it's a good idea just for remove this. > > OK, move mtk_dp_hwirq_enable() out of mtk_dp_poweron() and to the > bottom of mtk_dp_bridge_attach(). irq is not part of power. > I will do this and drop "if (mtk_dp->drm_dev)" > > > > > > > > + } > > > > > > + > > > > > > + if (mtk_dp->train_info.cable_state_change) { > > > > > > > > > > Executing this thread imply cable_state_change = true, so > > > > > drop > > > > > cable_state_change. > > > > > > > > > > > > > In mtk_dp_hpd_isr_handler(), there is another irq > > > > "MTK_DP_HPD_INTERRUPT" which means the sink devices give a > > > > interrupt > > > > to > > > > source device. it's not about connected status, so I think we > > > > still > > > > need this. > > > > > > In bottom of mtk_dp_hpd_isr_handler(), the code is: > > > > > > + train_info->cable_state_change = true; > > > + > > > + return IRQ_WAKE_THREAD; > > > > > > This thread is called only when return IRQ_WAKE_THREAD, and > > > before > > > return IRQ_WAKE_THREAD, train_info->cable_state_change is always > > > set > > > to > > > true. So in this thread, train_info->cable_state_change must be > > > true. > > > > > > > As mentioned, this irq handler function is not only for connected > > status. > > > > this could be return if this irq is interrupt from sink device. > > + if (!(train_info->irq_status & > > + (MTK_DP_HPD_CONNECT | MTK_DP_HPD_DISCONNECT))) > > + return IRQ_HANDLED; > > According to [1], return IRQ_WAKE_THREAD to wake up thread. So return > IRQ_HANDLED would not wake up thread. > > [1] > https://www.kernel.org/doc/htmldocs/kernel-api/API-request-threaded-irq.html > > Regards, > CK > yes, you are right. I will return IRQ_WAKE_THREAD for handle sink interrupt. > > > > BRs, > > Bo-Chen > > > Regards, > > > CK > > > > > > > > > > > > > + mtk_dp->train_info.cable_state_change = false; > > > > > > + > > > > > > + mtk_dp->train_state = > > > > > > MTK_DP_TRAIN_STATE_STARTUP; > > > > > > + > > > > > > + if (!mtk_dp->train_info.cable_plugged_in || > > > > > > + !mtk_dp_plug_state(mtk_dp)) { > > > > > > > > > > I do not like two variable to present one thing. If > > > > > > > > > > mtk_dp->train_info.cable_plugged_in = false > > > > > and > > > > > mtk_dp_plug_state(mtk_dp) = ture > > > > > > > > > > What does this mean? I think this mean 'now' is connected > > > > > because > > > > > cable_plugged_in is old information and mtk_dp_plug_state() > > > > > is > > > > > current > > > > > information. > > > > > > > > > > But I would like to keep cable_plugged_in and drop > > > > > mtk_dp_plug_state() > > > > > because cable_plugged_in would be changed in isr and it would > > > > > be > > > > > the > > > > > same as mtk_dp_plug_state(). > > > > > > > > > > Regards, > > > > > CK > > > > > > > > > > > > > ok, I will drop this. > > > > > > > > BRs, > > > > Rex > > > > > > > > > > + mtk_dp_video_mute(mtk_dp, true); > > > > > > + > > > > > > + mtk_dp_initialize_priv_data(mtk_dp); > > > > > > + mtk_dp_set_idle_pattern(mtk_dp, true); > > > > > > + if (mtk_dp->has_fec) > > > > > > + mtk_dp_fec_enable(mtk_dp, > > > > > > false); > > > > > > + > > > > > > + mtk_dp_update_bits(mtk_dp, > > > > > > MTK_DP_TOP_PWR_STATE, > > > > > > + DP_PWR_STATE_BANDGAP > > > > > > _TPLL, > > > > > > + DP_PWR_STATE_MASK); > > > > > > + } else { > > > > > > + mtk_dp_update_bits(mtk_dp, > > > > > > MTK_DP_TOP_PWR_STATE, > > > > > > + DP_PWR_STATE_BANDGAP > > > > > > _TPLL_LA > > > > > > NE, > > > > > > + DP_PWR_STATE_MASK); > > > > > > + drm_dp_read_dpcd_caps(&mtk_dp->aux, > > > > > > buf); > > > > > > + mtk_dp->train_info.link_rate = > > > > > > + min_t(int, mtk_dp- > > > > > > > max_linkrate, > > > > > > > > > > > > + buf[mtk_dp- > > > > > > > max_linkrate]); > > > > > > > > > > > > + mtk_dp->train_info.lane_count = > > > > > > + min_t(int, mtk_dp->max_lanes, > > > > > > + drm_dp_max_lane_count(buf > > > > > > )); > > > > > > + } > > > > > > + } > > > > > > + > > > > > > + if (mtk_dp->train_info.irq_status & > > > > > > MTK_DP_HPD_INTERRUPT) { > > > > > > + dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n"); > > > > > > + mtk_dp->train_info.irq_status &= > > > > > > ~MTK_DP_HPD_INTERRUPT; > > > > > > + mtk_dp_hpd_sink_event(mtk_dp); > > > > > > + } > > > > > > + > > > > > > + return IRQ_HANDLED; > > > > > > +} > > > > > > + > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
On Wed, 2022-06-08 at 10:44 +0800, CK Hu wrote: > Hi, Rex: > > On Tue, 2022-06-07 at 20:44 +0800, Rex-BC Chen wrote: > > On Tue, 2022-06-07 at 14:44 +0800, CK Hu wrote: > > > Hi, Rex: > > > > > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > > > > > This patch adds a DisplayPort driver for the Mediatek mt8195 > > > > SoC. > > > > > > > > It supports the mt8195, the embedded DisplayPort units. It > > > > offers > > > > DisplayPort 1.4 with up to 4 lanes. > > > > > > > > The driver creates a child device for the phy. The child device > > > > will > > > > never exist without the parent being active. As they are > > > > sharing > > > > a > > > > register range, the parent passes a regmap pointer to the child > > > > so > > > > that > > > > both can work with the same register range. The phy driver sets > > > > device > > > > data that is read by the parent to get the phy device that can > > > > be > > > > used > > > > to control the phy properties. > > > > > > > > This driver is based on an initial version by > > > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > > > --- > > > > > > [snip] > > > > > > > + > > > > +static int mtk_dp_train_handler(struct mtk_dp *mtk_dp) > > > > +{ > > > > + bool training_done = false; > > > > + short max_retry = 50; > > > > + int ret = 0; > > > > + > > > > + do { > > > > + switch (mtk_dp->train_state) { > > > > + case MTK_DP_TRAIN_STATE_STARTUP: > > > > > > mtk_dp->train_state is initialized as MTK_DP_TRAIN_STATE_STARTUP > > > even > > > though HPD ISR does not exist. Does this mean HPD ISR is > > > redundant? > > > If > > > HPD ISR is not redundant, create a new state > > > MTK_DP_TRAIN_STATE_NONE > > > for init state. > > > > > > > Hello CK, > > > > I think we don't need MTK_DP_TRAIN_STATE_NONE. > > Because it's "DP_TRAIN_STATE" not "DP_STATE", I think it's ok if we > > start this state machine with "MTK_DP_TRAIN_STATE_STARTUP". > > The initial state is MTK_DP_TRAIN_STATE_STARTUP, and HPD thread would > change state from MTK_DP_TRAIN_STATE_STARTUP to > MTK_DP_TRAIN_STATE_STARTUP, this is redundant. So drop the state > change > in HPD thread. > ok, in edp it's redundant in mtk_dp_hpd_event_thread(), but I will add it back in dp patch. > > > > > > + mtk_dp_state_handler(mtk_dp); > > > > + mtk_dp->train_state = > > > > MTK_DP_TRAIN_STATE_CHECKCAP; > > > > + break; > > > > + > > > > + case MTK_DP_TRAIN_STATE_CHECKCAP: > > > > + if (mtk_dp_parse_capabilities(mtk_dp)) > > > > { > > > > + mtk_dp- > > > > >train_info.check_cap_count = 0; > > > > + mtk_dp->train_state = > > > > MTK_DP_TRAIN_STATE_CHECKEDID; > > > > + } else { > > > > + mtk_dp- > > > > >train_info.check_cap_count++; > > > > + > > > > + if (mtk_dp- > > > > >train_info.check_cap_count > > > > > > > > > > > > > + MTK_DP_CHECK_SINK_CAP_TIMEO > > > > UT_COUNT > > > > ) { > > > > + mtk_dp- > > > > > train_info.check_cap_count = 0; > > > > > > > > + mtk_dp->train_state = > > > > MTK_DP_TRAIN_STATE_DPIDLE; > > > > + ret = -ETIMEDOUT; > > > > + } > > > > + } > > > > + break; > > > > + > > > > + case MTK_DP_TRAIN_STATE_CHECKEDID: > > > > + mtk_dp->train_state = > > > > MTK_DP_TRAIN_STATE_TRAINING_PRE; > > > > > > MTK_DP_TRAIN_STATE_CHECKEDID is a redundant state, drop it. > > > > > > > + break; > > > > + > > > > + case MTK_DP_TRAIN_STATE_TRAINING_PRE: > > > > + mtk_dp_state_handler(mtk_dp); > > > > + mtk_dp->train_state = > > > > MTK_DP_TRAIN_STATE_TRAINING; > > > > + break; > > > > + > > > > + case MTK_DP_TRAIN_STATE_TRAINING: > > > > + ret = mtk_dp_train_start(mtk_dp); > > > > + if (ret == 0) { > > > > + mtk_dp_video_mute(mtk_dp, > > > > true); > > > > + mtk_dp->train_state = > > > > MTK_DP_TRAIN_STATE_NORMAL; > > > > + mtk_dp_fec_enable(mtk_dp, > > > > mtk_dp- > > > > > has_fec); > > > > > > > > + } else if (ret != -EAGAIN) { > > > > + mtk_dp->train_state = > > > > MTK_DP_TRAIN_STATE_DPIDLE; > > > > + } > > > > + break; > > > > + case MTK_DP_TRAIN_STATE_NORMAL: > > > > + mtk_dp_state_handler(mtk_dp); > > > > + training_done = true; > > > > + break; > > > > + case MTK_DP_TRAIN_STATE_DPIDLE: > > > > > > When would this case happen? > > > > > > Regards, > > > CK > > > > Yes, if it's disconnected if we are still training for dp. > > or failed to training min spec RBR. > > I mean, every time state change to MTK_DP_TRAIN_STATE_DPIDLE, it > would > jump out of this loop and would not get into this loop, so this case > would never get in. This is redundant, so remove this. > > Regards, > CK > ok, I will remove it BRs, Bo-Chen > > > > BRs, > > Rex > > > > > > > + break; > > > > + default: > > > > + break; > > > > + } > > > > + > > > > + if (ret) { > > > > + if (ret == -EAGAIN) > > > > + continue; > > > > + /* > > > > + * If we get any other error number, it > > > > doesn't > > > > + * make any sense to keep iterating. > > > > + */ > > > > + break; > > > > + } > > > > + } while (!training_done || --max_retry); > > > > + > > > > + return ret; > > > > +} > > > > > > > > > > > >
Hi, Rex: On Wed, 2022-06-08 at 18:26 +0800, Rex-BC Chen wrote: > On Tue, 2022-06-07 at 15:47 +0800, CK Hu wrote: > > Hi, Rex: > > > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > > > > > It supports the mt8195, the embedded DisplayPort units. It offers > > > DisplayPort 1.4 with up to 4 lanes. > > > > > > The driver creates a child device for the phy. The child device > > > will > > > never exist without the parent being active. As they are sharing > > > a > > > register range, the parent passes a regmap pointer to the child > > > so > > > that > > > both can work with the same register range. The phy driver sets > > > device > > > data that is read by the parent to get the phy device that can be > > > used > > > to control the phy properties. > > > > > > This driver is based on an initial version by > > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > > --- > > > > [snip] > > > > > + > > > +static int mtk_dp_hpd_sink_event(struct mtk_dp *mtk_dp) > > > +{ > > > + ssize_t ret; > > > + u8 sink_count; > > > + bool locked; > > > + u8 link_status[DP_LINK_STATUS_SIZE] = {}; > > > + u32 sink_count_reg = DP_SINK_COUNT_ESI; > > > + u32 link_status_reg = DP_LANE0_1_STATUS; > > > + > > > + ret = drm_dp_dpcd_readb(&mtk_dp->aux, sink_count_reg, > > > &sink_count); > > > + if (ret < 0) { > > > + drm_err(mtk_dp->drm_dev, "Read sink count failed: > > > %ld\n", ret); > > > + return ret; > > > + } > > > + > > > + ret = drm_dp_dpcd_read(&mtk_dp->aux, link_status_reg, > > > link_status, > > > + sizeof(link_status)); > > > + if (!ret) { > > > + drm_err(mtk_dp->drm_dev, "Read link status failed: > > > %ld\n", > > > + ret); > > > + return ret; > > > + } > > > + > > > + locked = drm_dp_channel_eq_ok(link_status, > > > + mtk_dp->train_info.lane_count); > > > + if (!locked && mtk_dp->train_state > > > > MTK_DP_TRAIN_STATE_TRAINING_PRE) > > > > Before enter this function, mtk_dp->train_state is set to > > MTK_DP_TRAIN_STATE_STARTUP, so this never happen, drop this. > > > > The interrupt from sink device could come any time. Why it's > impossible? I still ask this question: "For eDP, when does disconnect happened?" If it indeed happen, I still do not like to change state here. When disconnect, the training flow would result in fail finally and need not to change state here, but the training flow would block for a while when disconnect. You could add some check point to check train_info- >cable_plugged_in to quickly break out the training flow. Regards, CK > > > > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_TRAINING_PRE; > > > + > > > + if (link_status[1] & DP_REMOTE_CONTROL_COMMAND_PENDING) > > > + drm_dp_dpcd_writeb(&mtk_dp->aux, > > > DP_DEVICE_SERVICE_IRQ_VECTOR, > > > + DP_REMOTE_CONTROL_COMMAND_PENDING); > > > + > > > + if (DP_GET_SINK_COUNT(sink_count) && > > > + (link_status[2] & DP_DOWNSTREAM_PORT_STATUS_CHANGED)) { > > > + mtk_dp->train_info.check_cap_count = 0; > > > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_CHECKEDID; > > > > Why change state from MTK_DP_TRAIN_STATE_STARTUP to > > MTK_DP_TRAIN_STATE_CHECKEDID? In mtk_dp_train_handler(), > > mtk_dp_parse_capabilities() is true then change to > > MTK_DP_TRAIN_STATE_CHECKEDID. Give a reason why these two are > > different. > > > > Regards, > > CK > > > > I will drop this and drop state of MTK_DP_TRAIN_STATE_CHECKEDID. > MTK_DP_TRAIN_STATE_CHECKEDID is only used for audio. > We can check enable status in another place. > > BRs, > Bo-Chen > > > > + msleep(20); > > > + } > > > + > > > + return 0; > > > +} > > > + > > > > > >
On Tue, 2022-06-07 at 16:01 +0800, CK Hu wrote: > Hi, Rex: > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > > > It supports the mt8195, the embedded DisplayPort units. It offers > > DisplayPort 1.4 with up to 4 lanes. > > > > The driver creates a child device for the phy. The child device > > will > > never exist without the parent being active. As they are sharing a > > register range, the parent passes a regmap pointer to the child so > > that > > both can work with the same register range. The phy driver sets > > device > > data that is read by the parent to get the phy device that can be > > used > > to control the phy properties. > > > > This driver is based on an initial version by > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > --- > > [snip] > > > + > > +static void mtk_dp_state_handler(struct mtk_dp *mtk_dp) > > +{ > > + switch (mtk_dp->state) { > > Does mtk_dp->state has any relation with mtk_dp->train_state. If yes, > mix mtk_dp->state and mtk_dp->train_state into one state. If no, move > calling mtk_dp_state_handler() out of mtk_dp_train_handler(). > > Regards, > CK > Hello CK, OK, I will refine this flow. About the state machine of traning flow, we can review in v11. BRs, Bo-Chen > > + case MTK_DP_STATE_INITIAL: > > + mtk_dp_video_mute(mtk_dp, true); > > + mtk_dp->state = MTK_DP_STATE_IDLE; > > + break; > > + > > + case MTK_DP_STATE_IDLE: > > + if (mtk_dp->train_state == MTK_DP_TRAIN_STATE_NORMAL) > > + mtk_dp->state = MTK_DP_STATE_PREPARE; > > + break; > > + > > + case MTK_DP_STATE_PREPARE: > > + mtk_dp_video_config(mtk_dp); > > + mtk_dp_video_enable(mtk_dp, true); > > + > > + mtk_dp->state = MTK_DP_STATE_NORMAL; > > + break; > > + > > + case MTK_DP_STATE_NORMAL: > > + if (mtk_dp->train_state != MTK_DP_TRAIN_STATE_NORMAL) { > > + mtk_dp_video_mute(mtk_dp, true); > > + mtk_dp->state = MTK_DP_STATE_IDLE; > > + } > > + break; > > + > > + default: > > + break; > > + } > > +} > >
On Thu, 2022-06-09 at 10:30 +0800, CK Hu wrote: > Hi, Rex: > > On Wed, 2022-06-08 at 18:26 +0800, Rex-BC Chen wrote: > > On Tue, 2022-06-07 at 15:47 +0800, CK Hu wrote: > > > Hi, Rex: > > > > > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > > > > > This patch adds a DisplayPort driver for the Mediatek mt8195 > > > > SoC. > > > > > > > > It supports the mt8195, the embedded DisplayPort units. It > > > > offers > > > > DisplayPort 1.4 with up to 4 lanes. > > > > > > > > The driver creates a child device for the phy. The child device > > > > will > > > > never exist without the parent being active. As they are > > > > sharing > > > > a > > > > register range, the parent passes a regmap pointer to the child > > > > so > > > > that > > > > both can work with the same register range. The phy driver sets > > > > device > > > > data that is read by the parent to get the phy device that can > > > > be > > > > used > > > > to control the phy properties. > > > > > > > > This driver is based on an initial version by > > > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > > > --- > > > > > > [snip] > > > > > > > + > > > > +static int mtk_dp_hpd_sink_event(struct mtk_dp *mtk_dp) > > > > +{ > > > > + ssize_t ret; > > > > + u8 sink_count; > > > > + bool locked; > > > > + u8 link_status[DP_LINK_STATUS_SIZE] = {}; > > > > + u32 sink_count_reg = DP_SINK_COUNT_ESI; > > > > + u32 link_status_reg = DP_LANE0_1_STATUS; > > > > + > > > > + ret = drm_dp_dpcd_readb(&mtk_dp->aux, sink_count_reg, > > > > &sink_count); > > > > + if (ret < 0) { > > > > + drm_err(mtk_dp->drm_dev, "Read sink count > > > > failed: > > > > %ld\n", ret); > > > > + return ret; > > > > + } > > > > + > > > > + ret = drm_dp_dpcd_read(&mtk_dp->aux, link_status_reg, > > > > link_status, > > > > + sizeof(link_status)); > > > > + if (!ret) { > > > > + drm_err(mtk_dp->drm_dev, "Read link status > > > > failed: > > > > %ld\n", > > > > + ret); > > > > + return ret; > > > > + } > > > > + > > > > + locked = drm_dp_channel_eq_ok(link_status, > > > > + mtk_dp- > > > > >train_info.lane_count); > > > > + if (!locked && mtk_dp->train_state > > > > > MTK_DP_TRAIN_STATE_TRAINING_PRE) > > > > > > Before enter this function, mtk_dp->train_state is set to > > > MTK_DP_TRAIN_STATE_STARTUP, so this never happen, drop this. > > > > > > > The interrupt from sink device could come any time. Why it's > > impossible? > > I still ask this question: "For eDP, when does disconnect happened?" > If > it indeed happen, I still do not like to change state here. When > disconnect, the training flow would result in fail finally and need > not > to change state here, but the training flow would block for a while > when disconnect. You could add some check point to check train_info- > > cable_plugged_in to quickly break out the training flow. > > Regards, > CK > Hello CK, This function is to handle "sink interrupt" and we need to read the status from sink device via aux channel. edp spec is just add some extension rule from dp spec, this is define in dp spec. The basic spec is still "dp", and these are all define in dp spec. Therefore, I think we should keep this. BRs, Bo-Chen > > > > > > + mtk_dp->train_state = > > > > MTK_DP_TRAIN_STATE_TRAINING_PRE; > > > > + > > > > + if (link_status[1] & DP_REMOTE_CONTROL_COMMAND_PENDING) > > > > + drm_dp_dpcd_writeb(&mtk_dp->aux, > > > > DP_DEVICE_SERVICE_IRQ_VECTOR, > > > > + DP_REMOTE_CONTROL_COMMAND_PE > > > > NDING); > > > > + > > > > + if (DP_GET_SINK_COUNT(sink_count) && > > > > + (link_status[2] & > > > > DP_DOWNSTREAM_PORT_STATUS_CHANGED)) { > > > > + mtk_dp->train_info.check_cap_count = 0; > > > > + mtk_dp->train_state = > > > > MTK_DP_TRAIN_STATE_CHECKEDID; > > > > > > Why change state from MTK_DP_TRAIN_STATE_STARTUP to > > > MTK_DP_TRAIN_STATE_CHECKEDID? In mtk_dp_train_handler(), > > > mtk_dp_parse_capabilities() is true then change to > > > MTK_DP_TRAIN_STATE_CHECKEDID. Give a reason why these two are > > > different. > > > > > > Regards, > > > CK > > > > > > > I will drop this and drop state of MTK_DP_TRAIN_STATE_CHECKEDID. > > MTK_DP_TRAIN_STATE_CHECKEDID is only used for audio. > > We can check enable status in another place. > > > > BRs, > > Bo-Chen > > > > > > + msleep(20); > > > > + } > > > > + > > > > + return 0; > > > > +} > > > > + > > > > > > > > > > > >
On Tue, 2022-06-07 at 17:04 +0800, CK Hu wrote: > Hi, Rex: > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > > > It supports the mt8195, the embedded DisplayPort units. It offers > > DisplayPort 1.4 with up to 4 lanes. > > > > The driver creates a child device for the phy. The child device > > will > > never exist without the parent being active. As they are sharing a > > register range, the parent passes a regmap pointer to the child so > > that > > both can work with the same register range. The phy driver sets > > device > > data that is read by the parent to get the phy device that can be > > used > > to control the phy properties. > > > > This driver is based on an initial version by > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > --- > > [snip] > > > + > > +static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev) > > +{ > > + struct mtk_dp *mtk_dp = dev; > > + int event; > > + u8 buf[DP_RECEIVER_CAP_SIZE] = {}; > > + > > + event = mtk_dp_plug_state(mtk_dp) ? connector_status_connected > > : > > + connector_status_disc > > onnected; > > + > > + if (event < 0) > > + return IRQ_HANDLED; > > + > > + if (mtk_dp->drm_dev) { > > + dev_info(mtk_dp->dev, "drm_helper_hpd_irq_event\n"); > > + drm_helper_hpd_irq_event(mtk_dp->bridge.dev); > > + } > > + > > + if (mtk_dp->train_info.cable_state_change) { > > + mtk_dp->train_info.cable_state_change = false; > > + > > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_STARTUP; > > + > > + if (!mtk_dp->train_info.cable_plugged_in || > > + !mtk_dp_plug_state(mtk_dp)) { > > + mtk_dp_video_mute(mtk_dp, true); > > For eDP, when does 'unplug' happen? Explain this or move unplug > processing to DP patch. > > Regards, > CK > Hello CK, ok, I move them to dp patch. BRs, Bo-Chen > > + > > + mtk_dp_initialize_priv_data(mtk_dp); > > + mtk_dp_set_idle_pattern(mtk_dp, true); > > + if (mtk_dp->has_fec) > > + mtk_dp_fec_enable(mtk_dp, false); > > + > > + mtk_dp_update_bits(mtk_dp, > > MTK_DP_TOP_PWR_STATE, > > + DP_PWR_STATE_BANDGAP_TPLL, > > + DP_PWR_STATE_MASK); > > + } else { > > + mtk_dp_update_bits(mtk_dp, > > MTK_DP_TOP_PWR_STATE, > > + DP_PWR_STATE_BANDGAP_TPLL_LA > > NE, > > + DP_PWR_STATE_MASK); > > + drm_dp_read_dpcd_caps(&mtk_dp->aux, buf); > > + mtk_dp->train_info.link_rate = > > + min_t(int, mtk_dp->max_linkrate, > > + buf[mtk_dp->max_linkrate]); > > + mtk_dp->train_info.lane_count = > > + min_t(int, mtk_dp->max_lanes, > > + drm_dp_max_lane_count(buf)); > > + } > > + } > > + > > + if (mtk_dp->train_info.irq_status & MTK_DP_HPD_INTERRUPT) { > > + dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n"); > > + mtk_dp->train_info.irq_status &= ~MTK_DP_HPD_INTERRUPT; > > + mtk_dp_hpd_sink_event(mtk_dp); > > + } > > + > > + return IRQ_HANDLED; > > +} > > + > >
On Wed, 2022-06-08 at 16:30 +0800, CK Hu wrote: > Hi, Rex: > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > > > It supports the mt8195, the embedded DisplayPort units. It offers > > DisplayPort 1.4 with up to 4 lanes. > > > > The driver creates a child device for the phy. The child device > > will > > never exist without the parent being active. As they are sharing a > > register range, the parent passes a regmap pointer to the child so > > that > > both can work with the same register range. The phy driver sets > > device > > data that is read by the parent to get the phy device that can be > > used > > to control the phy properties. > > > > This driver is based on an initial version by > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > --- > > [snip] > > > + > > +static bool mtk_dp_parse_capabilities(struct mtk_dp *mtk_dp) > > +{ > > + u8 buf[DP_RECEIVER_CAP_SIZE] = {}; > > + u8 val; > > + struct mtk_dp_train_info *train_info = &mtk_dp->train_info; > > + > > + if (!mtk_dp_plug_state(mtk_dp)) > > + return false; > > + > > + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, > > DP_SET_POWER_D0); > > + /* Wait for power on */ > > + usleep_range(2000, 5000); > > + > > + drm_dp_read_dpcd_caps(&mtk_dp->aux, buf); > > + > > + memcpy(mtk_dp->rx_cap, buf, min(sizeof(mtk_dp->rx_cap), > > sizeof(buf))); > > sizeof(mtk_dp->rx_cap) is identical to sizeof(buf), so > > drm_dp_read_dpcd_caps(&mtk_dp->aux, mtk_dp->rx_cap); > > Hello CK, I will drop buf[]. > > + mtk_dp->rx_cap[DP_TRAINING_AUX_RD_INTERVAL] &= > > DP_TRAINING_AUX_RD_MASK; > > + > > + train_info->link_rate = > > + min_t(int, mtk_dp->max_linkrate, buf[mtk_dp- > > > max_linkrate]); > > > > + train_info->lane_count = > > + min_t(int, mtk_dp->max_lanes, > > drm_dp_max_lane_count(buf)); > > + > > + train_info->tps3 = drm_dp_tps3_supported(buf); > > + train_info->tps4 = drm_dp_tps4_supported(buf); > > + > > + train_info->sink_ssc = > > + !!(buf[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5); > > + > > + train_info->sink_ssc = false; > > What does these two statement do? > ssc = Spread spectrum clock. it's for both edp and dp. BRs, Bo-Chen > Regards, > CK > > > + > > + drm_dp_dpcd_readb(&mtk_dp->aux, DP_MSTM_CAP, &val); > > + if (val & DP_MST_CAP) { > > + /* Clear DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 */ > > + drm_dp_dpcd_readb(&mtk_dp->aux, > > + DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0, > > &val); > > + if (val) > > + drm_dp_dpcd_writeb(&mtk_dp->aux, > > + DP_DEVICE_SERVICE_IRQ_VECTOR > > _ESI0, > > + val); > > + } > > + > > + return true; > > +} > > + > >
Hi, Rex: On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > From: Markus Schneider-Pargmann <msp@baylibre.com> > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > It supports the mt8195, the embedded DisplayPort units. It offers > DisplayPort 1.4 with up to 4 lanes. > > The driver creates a child device for the phy. The child device will > never exist without the parent being active. As they are sharing a > register range, the parent passes a regmap pointer to the child so > that > both can work with the same register range. The phy driver sets > device > data that is read by the parent to get the phy device that can be > used > to control the phy properties. > > This driver is based on an initial version by > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > --- [snip] > + > +static int mtk_dp_power_disable(struct mtk_dp *mtk_dp) > +{ > + int ret; > + > + ret = mtk_dp_write(mtk_dp, MTK_DP_TOP_PWR_STATE, 0); > + > + if (ret) > + return ret; > + > + ret = mtk_dp_write(mtk_dp, MTK_DP_0034, MTK_DP_0034 is defined as: +#define MTK_DP_0034 (BIT(2) | BIT(4) | BIT(5)) I think this a weird address. > + DA_CKM_CKTX0_EN_FORCE_EN | > DA_CKM_BIAS_LPF_EN_FORCE_VAL | > + DA_CKM_BIAS_EN_FORCE_VAL | > + DA_XTP_GLB_LDO_EN_FORCE_VAL | > + DA_XTP_GLB_AVD10_ON_FORCE_VAL); > + > + if (ret) > + return ret; > + > + /* Disable RX */ > + ret = mtk_dp_write(mtk_dp, MTK_DP_1040, 0); MTK_DP_1040 is defined as: +#define MTK_DP_1040 (BIT(6) | BIT(12)) I think this a weird address. Regards, CK > + > + if (ret) > + return ret; > + > + ret = mtk_dp_write(mtk_dp, MTK_DP_TOP_MEM_PD, > + 0x550 | BIT(FUSE_SEL_SHIFT) | > BIT(MEM_ISO_EN_SHIFT)); > + > + return ret; > +}
On Thu, 2022-06-09 at 17:37 +0800, CK Hu wrote: > Hi, Rex: > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC. > > > > It supports the mt8195, the embedded DisplayPort units. It offers > > DisplayPort 1.4 with up to 4 lanes. > > > > The driver creates a child device for the phy. The child device > > will > > never exist without the parent being active. As they are sharing a > > register range, the parent passes a regmap pointer to the child so > > that > > both can work with the same register range. The phy driver sets > > device > > data that is read by the parent to get the phy device that can be > > used > > to control the phy properties. > > > > This driver is based on an initial version by > > Jason-JH.Lin <jason-jh.lin@mediatek.com>. > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > --- > > [snip] > > > + > > +static int mtk_dp_power_disable(struct mtk_dp *mtk_dp) > > +{ > > + int ret; > > + > > + ret = mtk_dp_write(mtk_dp, MTK_DP_TOP_PWR_STATE, 0); > > + > > + if (ret) > > + return ret; > > + > > + ret = mtk_dp_write(mtk_dp, MTK_DP_0034, > > MTK_DP_0034 is defined as: > > +#define MTK_DP_0034 (BIT(2) | BIT(4) | BIT(5)) > > I think this a weird address. > > > + DA_CKM_CKTX0_EN_FORCE_EN | > > DA_CKM_BIAS_LPF_EN_FORCE_VAL | > > + DA_CKM_BIAS_EN_FORCE_VAL | > > + DA_XTP_GLB_LDO_EN_FORCE_VAL | > > + DA_XTP_GLB_AVD10_ON_FORCE_VAL); > > + > > + if (ret) > > + return ret; > > + > > + /* Disable RX */ > > + ret = mtk_dp_write(mtk_dp, MTK_DP_1040, 0); > > > MTK_DP_1040 is defined as: > > +#define MTK_DP_1040 (BIT(6) | BIT(12)) > > I think this a weird address. > > Regards, > CK > Hello CK, I will change them to 0x34 and 0x1040. BRs, Rex > > + > > + if (ret) > > + return ret; > > + > > + ret = mtk_dp_write(mtk_dp, MTK_DP_TOP_MEM_PD, > > + 0x550 | BIT(FUSE_SEL_SHIFT) | > > BIT(MEM_ISO_EN_SHIFT)); > > + > > + return ret; > > +} > >
diff --git a/drivers/gpu/drm/mediatek/Kconfig b/drivers/gpu/drm/mediatek/Kconfig index 2976d21e9a34..a37b6ec9f01e 100644 --- a/drivers/gpu/drm/mediatek/Kconfig +++ b/drivers/gpu/drm/mediatek/Kconfig @@ -21,6 +21,14 @@ config DRM_MEDIATEK This driver provides kernel mode setting and buffer management to userspace. +config DRM_MEDIATEK_DP + tristate "DRM DPTX Support for Mediatek SoCs" + depends on DRM_MEDIATEK + select PHY_MTK_DP + select DRM_DP_HELPER + help + DRM/KMS Display Port driver for Mediatek SoCs. + config DRM_MEDIATEK_HDMI tristate "DRM HDMI Support for Mediatek SoCs" depends on DRM_MEDIATEK diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile index 3abd27d7c91d..d4d193f60271 100644 --- a/drivers/gpu/drm/mediatek/Makefile +++ b/drivers/gpu/drm/mediatek/Makefile @@ -25,3 +25,5 @@ mediatek-drm-hdmi-objs := mtk_cec.o \ mtk_hdmi_ddc.o obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o + +obj-$(CONFIG_DRM_MEDIATEK_DP) += mtk_dp.o diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c b/drivers/gpu/drm/mediatek/mtk_dp.c new file mode 100644 index 000000000000..8eb17ae82bfd --- /dev/null +++ b/drivers/gpu/drm/mediatek/mtk_dp.c @@ -0,0 +-2,2567 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 MediaTek Inc. + * Copyright (c) 2022 BayLibre + */ + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_bridge.h> +#include <drm/drm_crtc.h> +#include <drm/dp/drm_dp_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_of.h> +#include <drm/drm_panel.h> +#include <drm/drm_print.h> +#include <drm/drm_probe_helper.h> +#include <linux/arm-smccc.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/nvmem-consumer.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <sound/hdmi-codec.h> +#include <video/videomode.h> + +#include "mtk_dp_reg.h" + +#define MTK_VDOSYS1_MAX_FRAMERATE 60 +#define MTK_DP_4P1T 4 +#define MTK_DP_HDE 2 +#define MTK_DP_PIX_PER_ADDR 2 +#define MTK_DP_AUX_WAIT_REPLY_COUNT 20 +#define MTK_DP_CHECK_SINK_CAP_TIMEOUT_COUNT 3 + +#define MTK_DP_TBC_BUF_READ_START_ADDR 0x08 + +#define MTK_DP_TRAIN_RETRY_LIMIT 8 +#define MTK_DP_TRAIN_MAX_ITERATIONS 5 + +#define MTK_DP_AUX_WRITE_READ_WAIT_TIME_US 20 + +#define MTK_DP_DP_VERSION_11 0x11 + +enum mtk_dp_state { + MTK_DP_STATE_INITIAL, + MTK_DP_STATE_IDLE, + MTK_DP_STATE_PREPARE, + MTK_DP_STATE_NORMAL, +}; + +enum mtk_dp_train_state { + MTK_DP_TRAIN_STATE_STARTUP = 0, + MTK_DP_TRAIN_STATE_CHECKCAP, + MTK_DP_TRAIN_STATE_CHECKEDID, + MTK_DP_TRAIN_STATE_TRAINING_PRE, + MTK_DP_TRAIN_STATE_TRAINING, + MTK_DP_TRAIN_STATE_NORMAL, + MTK_DP_TRAIN_STATE_DPIDLE, +}; + +struct mtk_dp_timings { + struct videomode vm; + + u8 frame_rate; + u32 pix_rate_khz; +}; + +struct mtk_dp_train_info { + bool tps3; + bool tps4; + bool sink_ssc; + bool cable_plugged_in; + bool cable_state_change; + bool cr_done; + bool eq_done; + + /* link_rate is in multiple of 0.27Gbps */ + int link_rate; + int lane_count; + + u8 irq_status; + int check_cap_count; +}; + +/* Multiple of 0.27Gbps */ +enum mtk_dp_linkrate { + MTK_DP_LINKRATE_RBR = 0x6, + MTK_DP_LINKRATE_HBR = 0xA, + MTK_DP_LINKRATE_HBR2 = 0x14, + MTK_DP_LINKRATE_HBR25 = 0x19, + MTK_DP_LINKRATE_HBR3 = 0x1E, +}; + +//TODO: redundant with DP_MSA_MISC_*_BPC ? +/* Same values as used for DP Spec MISC0 bits 5,6,7 */ +enum mtk_dp_color_depth { + MTK_DP_COLOR_DEPTH_6BIT = 0, + MTK_DP_COLOR_DEPTH_8BIT = 1, + MTK_DP_COLOR_DEPTH_10BIT = 2, + MTK_DP_COLOR_DEPTH_12BIT = 3, + MTK_DP_COLOR_DEPTH_16BIT = 4, + MTK_DP_COLOR_DEPTH_UNKNOWN = 5, +}; + +struct mtk_dp_info { + enum mtk_dp_color_depth depth; + enum dp_pixelformat format; + struct mtk_dp_timings timings; +}; + +struct dp_cal_data { + unsigned int glb_bias_trim; + unsigned int clktx_impse; + + unsigned int *ln_tx_impsel_pmos; + unsigned int *ln_tx_impsel_nmos; +}; + +struct mtk_dp { + struct device *dev; + struct platform_device *phy_dev; + struct phy *phy; + struct dp_cal_data cal_data; + u8 max_lanes; + u8 max_linkrate; + + struct drm_device *drm_dev; + struct drm_bridge bridge; + struct drm_bridge *next_bridge; + struct drm_dp_aux aux; + + u8 rx_cap[DP_RECEIVER_CAP_SIZE]; + + struct mtk_dp_info info; + enum mtk_dp_state state; + + struct mtk_dp_train_info train_info; + enum mtk_dp_train_state train_state; + unsigned int input_fmt; + + struct regmap *regs; + struct clk *dp_tx_clk; + + bool enabled; + + bool has_fec; + /* Protects the mtk_dp struct */ + struct mutex dp_lock; + + struct drm_connector *conn; +}; + +static struct regmap_config mtk_dp_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = SEC_OFFSET + 0x90, + .name = "mtk-dp-registers", +}; + +static struct mtk_dp *mtk_dp_from_bridge(struct drm_bridge *b) +{ + return container_of(b, struct mtk_dp, bridge); +} + +static u32 mtk_dp_read(struct mtk_dp *mtk_dp, u32 offset) +{ + u32 read_val; + int ret; + + ret = regmap_read(mtk_dp->regs, offset, &read_val); + if (ret) { + dev_err(mtk_dp->dev, "Failed to read register 0x%x: %d\n", + offset, ret); + return 0; + } + + return read_val; +} + +static int mtk_dp_write(struct mtk_dp *mtk_dp, u32 offset, u32 val) +{ + int ret; + + ret = regmap_write(mtk_dp->regs, offset, val); + if (ret) + dev_err(mtk_dp->dev, + "Failed to write register 0x%x with value 0x%x: %d\n", + offset, val, ret); + return ret; +} + +static int mtk_dp_update_bits(struct mtk_dp *mtk_dp, u32 offset, u32 val, + u32 mask) +{ + int ret; + + ret = regmap_update_bits(mtk_dp->regs, offset, mask, val); + if (ret) + dev_err(mtk_dp->dev, + "Failed to update register 0x%x with value 0x%x, mask 0x%x: %d\n", + offset, val, mask, ret); + return ret; +} + +static int mtk_dp_bulk_16bit_write(struct mtk_dp *mtk_dp, u32 offset, u8 *buf, + size_t length) +{ + int i; + int ret = 0; + int num_regs = (length + 1) / 2; + + /* 2 bytes per register */ + for (i = 0; i < num_regs; i++) { + u32 val = buf[i * 2] | + (i * 2 + 1 < length ? buf[i * 2 + 1] << 8 : 0); + + ret = mtk_dp_write(mtk_dp, offset + i * 4, val); + if (ret) + return ret; + } + + return ret; +} + +static unsigned long mtk_dp_sip_atf_call(unsigned int cmd, unsigned int para) +{ + struct arm_smccc_res res; + + arm_smccc_smc(MTK_DP_SIP_CONTROL_AARCH32, cmd, para, 0, 0, 0, 0, 0, + &res); + + pr_debug("[DPTX]%s cmd 0x%x, p1 0x%x, ret 0x%lx-0x%lx", __func__, cmd, + para, res.a0, res.a1); + return res.a1; +} + +static int mtk_dp_msa_bypass_disable(struct mtk_dp *mtk_dp) +{ + const u16 bits_to_set = + BIT(HTOTAL_SEL_DP_ENC0_P0_SHIFT) | + BIT(VTOTAL_SEL_DP_ENC0_P0_SHIFT) | + BIT(HSTART_SEL_DP_ENC0_P0_SHIFT) | + BIT(VSTART_SEL_DP_ENC0_P0_SHIFT) | + BIT(HWIDTH_SEL_DP_ENC0_P0_SHIFT) | + BIT(VHEIGHT_SEL_DP_ENC0_P0_SHIFT) | + BIT(HSP_SEL_DP_ENC0_P0_SHIFT) | BIT(HSW_SEL_DP_ENC0_P0_SHIFT) | + BIT(VSP_SEL_DP_ENC0_P0_SHIFT) | BIT(VSW_SEL_DP_ENC0_P0_SHIFT); + return mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3030, bits_to_set, + bits_to_set); +} + +static int mtk_dp_set_msa(struct mtk_dp *mtk_dp) +{ + int ret; + struct drm_display_mode mode; + struct mtk_dp_timings *timings = &mtk_dp->info.timings; + + drm_display_mode_from_videomode(&timings->vm, &mode); + + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3010, mode.htotal, + HTOTAL_SW_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3018, + timings->vm.hsync_len + timings->vm.hback_porch, + HSTART_SW_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3028, + timings->vm.hsync_len << HSW_SW_DP_ENC0_P0_SHIFT, + HSW_SW_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3028, 0, + HSP_SW_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3020, timings->vm.hactive, + HWIDTH_SW_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3014, mode.vtotal, + VTOTAL_SW_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_301C, + timings->vm.vsync_len + timings->vm.vback_porch, + VSTART_SW_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_302C, + timings->vm.vsync_len << VSW_SW_DP_ENC0_P0_SHIFT, + VSW_SW_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_302C, 0, + VSP_SW_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3024, timings->vm.vactive, + VHEIGHT_SW_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3064, timings->vm.hactive, + HDE_NUM_LAST_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3154, mode.htotal, + PGEN_HTOTAL_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3158, + timings->vm.hfront_porch, + PGEN_HSYNC_RISING_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_315C, timings->vm.hsync_len, + PGEN_HSYNC_PULSE_WIDTH_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3160, + timings->vm.hback_porch + timings->vm.hsync_len, + PGEN_HFDE_START_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3164, timings->vm.hactive, + PGEN_HFDE_ACTIVE_WIDTH_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3168, mode.vtotal, + PGEN_VTOTAL_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_316C, + timings->vm.vfront_porch, + PGEN_VSYNC_RISING_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3170, timings->vm.vsync_len, + PGEN_VSYNC_PULSE_WIDTH_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3174, + timings->vm.vback_porch + timings->vm.vsync_len, + PGEN_VFDE_START_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3178, timings->vm.vactive, + PGEN_VFDE_ACTIVE_WIDTH_DP_ENC0_P0_MASK); + + return ret; +} + +static int mtk_dp_set_color_format(struct mtk_dp *mtk_dp, + enum dp_pixelformat color_format) +{ + u32 val; + int ret; + + mtk_dp->info.format = color_format; + + /* Update MISC0 */ + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3034, + color_format << DP_TEST_COLOR_FORMAT_SHIFT, + DP_TEST_COLOR_FORMAT_MASK); + + if (ret) + return ret; + + switch (color_format) { + case DP_PIXELFORMAT_YUV422: + val = PIXEL_ENCODE_FORMAT_DP_ENC0_P0_YCBCR422; + break; + case DP_PIXELFORMAT_YUV420: + val = PIXEL_ENCODE_FORMAT_DP_ENC0_P0_YCBCR420; + break; + case DP_PIXELFORMAT_RGB: + case DP_PIXELFORMAT_YUV444: + val = PIXEL_ENCODE_FORMAT_DP_ENC0_P0_RGB; + break; + case DP_PIXELFORMAT_Y_ONLY: + case DP_PIXELFORMAT_RAW: + case DP_PIXELFORMAT_RESERVED: + default: + drm_warn(mtk_dp->drm_dev, "Unsupported color format: %d\n", + color_format); + return -EINVAL; + } + + return mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_303C, val, + PIXEL_ENCODE_FORMAT_DP_ENC0_P0_MASK); +} + +static int mtk_dp_set_color_depth(struct mtk_dp *mtk_dp, + enum mtk_dp_color_depth color_depth) +{ + int ret; + u32 val; + + mtk_dp->info.depth = color_depth; + + /* Update MISC0 */ + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3034, + color_depth << DP_TEST_BIT_DEPTH_SHIFT, + DP_TEST_BIT_DEPTH_MASK); + + if (ret) + return ret; + + switch (color_depth) { + case MTK_DP_COLOR_DEPTH_6BIT: + val = VIDEO_COLOR_DEPTH_DP_ENC0_P0_6BIT; + break; + case MTK_DP_COLOR_DEPTH_8BIT: + val = VIDEO_COLOR_DEPTH_DP_ENC0_P0_8BIT; + break; + case MTK_DP_COLOR_DEPTH_10BIT: + val = VIDEO_COLOR_DEPTH_DP_ENC0_P0_10BIT; + break; + case MTK_DP_COLOR_DEPTH_12BIT: + val = VIDEO_COLOR_DEPTH_DP_ENC0_P0_12BIT; + break; + case MTK_DP_COLOR_DEPTH_16BIT: + val = VIDEO_COLOR_DEPTH_DP_ENC0_P0_16BIT; + break; + case MTK_DP_COLOR_DEPTH_UNKNOWN: + drm_warn(mtk_dp->drm_dev, "Unsupported color depth %d\n", + color_depth); + return -EINVAL; + } + + return mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_303C, val, + VIDEO_COLOR_DEPTH_DP_ENC0_P0_MASK); +} + +static int mtk_dp_mn_overwrite_disable(struct mtk_dp *mtk_dp) +{ + return mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3004, 0, + VIDEO_M_CODE_SEL_DP_ENC0_P0_MASK); +} + +static int mtk_dp_set_sram_read_start(struct mtk_dp *mtk_dp, u32 val) +{ + return mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_303C, + val << SRAM_START_READ_THRD_DP_ENC0_P0_SHIFT, + SRAM_START_READ_THRD_DP_ENC0_P0_MASK); +} + +static int mtk_dp_setup_encoder(struct mtk_dp *mtk_dp) +{ + int ret; + + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_303C, + BIT(VIDEO_MN_GEN_EN_DP_ENC0_P0_SHIFT), + VIDEO_MN_GEN_EN_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3040, + 0x20 << SDP_DOWN_CNT_INIT_DP_ENC0_P0_SHIFT, + SDP_DOWN_CNT_INIT_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC1_P0_3364, + 0x20 << SDP_DOWN_CNT_INIT_IN_HBLANK_DP_ENC1_P0_SHIFT, + SDP_DOWN_CNT_INIT_IN_HBLANK_DP_ENC1_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC1_P0_3300, + 2 << VIDEO_AFIFO_RDY_SEL_DP_ENC1_P0_SHIFT, + VIDEO_AFIFO_RDY_SEL_DP_ENC1_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC1_P0_3364, + 4 << FIFO_READ_START_POINT_DP_ENC1_P0_SHIFT, + FIFO_READ_START_POINT_DP_ENC1_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_write(mtk_dp, MTK_DP_ENC1_P0_3368, + 1 << VIDEO_SRAM_FIFO_CNT_RESET_SEL_DP_ENC1_P0_SHIFT | + 1 << VIDEO_STABLE_CNT_THRD_DP_ENC1_P0_SHIFT | + BIT(SDP_DP13_EN_DP_ENC1_P0_SHIFT) | + 1 << BS2BS_MODE_DP_ENC1_P0_SHIFT); + + return ret; +} + +static int mtk_dp_pg_disable(struct mtk_dp *mtk_dp) +{ + int ret; + + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3038, 0, + VIDEO_SOURCE_SEL_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_31B0, + 4 << PGEN_PATTERN_SEL_SHIFT, PGEN_PATTERN_SEL_MASK); + + return ret; +} + +static bool mtk_dp_plug_state(struct mtk_dp *mtk_dp) +{ + return !!(mtk_dp_read(mtk_dp, MTK_DP_TRANS_P0_3414) & + HPD_DB_DP_TRANS_P0_MASK); +} + +static void mtk_dp_aux_irq_clear(struct mtk_dp *mtk_dp) +{ + mtk_dp_write(mtk_dp, MTK_DP_AUX_P0_3640, + BIT(AUX_400US_TIMEOUT_IRQ_AUX_TX_P0_SHIFT) | + BIT(AUX_RX_DATA_RECV_IRQ_AUX_TX_P0_SHIFT) | + BIT(AUX_RX_ADDR_RECV_IRQ_AUX_TX_P0_SHIFT) | + BIT(AUX_RX_CMD_RECV_IRQ_AUX_TX_P0_SHIFT) | + BIT(AUX_RX_MCCS_RECV_COMPLETE_IRQ_AUX_TX_P0_SHIFT) | + BIT(AUX_RX_EDID_RECV_COMPLETE_IRQ_AUX_TX_P0_SHIFT) | + BIT(AUX_RX_AUX_RECV_COMPLETE_IRQ_AUX_TX_P0_SHIFT)); + /* Wait for the irq to be cleared */ + usleep_range(MTK_DP_AUX_WRITE_READ_WAIT_TIME_US, + MTK_DP_AUX_WRITE_READ_WAIT_TIME_US * 2); +} + +static int mtk_dp_aux_set_cmd(struct mtk_dp *mtk_dp, u8 cmd, u32 addr) +{ + int ret; + + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_3644, cmd, + MCU_REQUEST_COMMAND_AUX_TX_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_3648, addr, + MCU_REQUEST_ADDRESS_LSB_AUX_TX_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_364C, addr >> 16, + MCU_REQUEST_ADDRESS_MSB_AUX_TX_P0_MASK); + + return ret; +} + +static int mtk_dp_aux_cmd_complete(struct mtk_dp *mtk_dp) +{ + return mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_3650, + BIT(MCU_ACK_TRAN_COMPLETE_AUX_TX_P0_SHIFT), + MCU_ACK_TRAN_COMPLETE_AUX_TX_P0_MASK | + PHY_FIFO_RST_AUX_TX_P0_MASK | + MCU_REQ_DATA_NUM_AUX_TX_P0_MASK); +} + +static int mtk_dp_aux_request_ready(struct mtk_dp *mtk_dp) +{ + return mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_3630, + BIT(AUX_TX_REQUEST_READY_AUX_TX_P0_SHIFT), + AUX_TX_REQUEST_READY_AUX_TX_P0_MASK); +} + +static void mtk_dp_aux_fill_write_fifo(struct mtk_dp *mtk_dp, u8 *buf, + size_t length) +{ + mtk_dp_bulk_16bit_write(mtk_dp, MTK_DP_AUX_P0_3708, buf, length); +} + +static int mtk_dp_aux_read_rx_fifo(struct mtk_dp *mtk_dp, u8 *buf, + size_t length, int read_delay) +{ + int ret; + int read_pos; + + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_3620, 0, + AUX_RD_MODE_AUX_TX_P0_MASK); + if (ret) + return ret; + + for (read_pos = 0; read_pos < length; read_pos++) { + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_3620, + BIT(AUX_RX_FIFO_R_PULSE_TX_P0_SHIFT), + AUX_RX_FIFO_READ_PULSE_TX_P0_MASK); + if (ret) + return ret; + + /* Hardware needs time to update the data */ + usleep_range(read_delay, read_delay * 2); + buf[read_pos] = + (u8)(mtk_dp_read(mtk_dp, MTK_DP_AUX_P0_3620) & + AUX_RX_FIFO_READ_DATA_AUX_TX_P0_MASK >> + AUX_RX_FIFO_READ_DATA_AUX_TX_P0_SHIFT); + } + + return ret; +} + +static int mtk_dp_aux_set_length(struct mtk_dp *mtk_dp, size_t length) +{ + int ret; + + if (length > 0) { + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_3650, + (length - 1) + << MCU_REQ_DATA_NUM_AUX_TX_P0_SHIFT, + MCU_REQ_DATA_NUM_AUX_TX_P0_MASK); + if (ret) + return ret; + + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_362C, 0, + AUX_NO_LENGTH_AUX_TX_P0_MASK | + AUX_TX_AUXTX_OV_EN_AUX_TX_P0_MASK | + AUX_RESERVED_RW_0_AUX_TX_P0_MASK); + } else { + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_362C, + BIT(AUX_NO_LENGTH_AUX_TX_P0_SHIFT), + AUX_NO_LENGTH_AUX_TX_P0_MASK | + AUX_TX_AUXTX_OV_EN_AUX_TX_P0_MASK | + AUX_RESERVED_RW_0_AUX_TX_P0_MASK); + } + + return ret; +} + +static int mtk_dp_aux_wait_for_completion(struct mtk_dp *mtk_dp, bool is_read) +{ + int wait_reply = MTK_DP_AUX_WAIT_REPLY_COUNT; + + while (--wait_reply) { + u32 aux_irq_status; + + if (is_read) { + u32 fifo_status = mtk_dp_read(mtk_dp, MTK_DP_AUX_P0_3618); + + if (fifo_status & + (AUX_RX_FIFO_WRITE_POINTER_AUX_TX_P0_MASK | + AUX_RX_FIFO_FULL_AUX_TX_P0_MASK)) { + return 0; + } + } + + aux_irq_status = mtk_dp_read(mtk_dp, MTK_DP_AUX_P0_3640); + if (aux_irq_status & AUX_RX_RECV_COMPLETE_IRQ_TX_P0_MASK) + return 0; + + if (aux_irq_status & AUX_400US_TIMEOUT_IRQ_AUX_TX_P0_MASK) + return -ETIMEDOUT; + + /* Give the hardware a chance to reach completion before retrying */ + usleep_range(100, 500); + } + + return -ETIMEDOUT; +} + +static int mtk_dp_aux_do_transfer(struct mtk_dp *mtk_dp, bool is_read, u8 cmd, + u32 addr, u8 *buf, size_t length) +{ + int ret; + u32 reply_cmd; + + if (is_read && (length > DP_AUX_MAX_PAYLOAD_BYTES || + (cmd == DP_AUX_NATIVE_READ && !length))) + return -EINVAL; + + if (!is_read) { + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_3704, + BIT(AUX_TX_FIFO_NEW_MODE_EN_AUX_TX_P0_SHIFT), + AUX_TX_FIFO_NEW_MODE_EN_AUX_TX_P0_MASK); + + if (ret) + return ret; + } + + mtk_dp_aux_cmd_complete(mtk_dp); + mtk_dp_aux_irq_clear(mtk_dp); + + mtk_dp_aux_set_cmd(mtk_dp, cmd, addr); + mtk_dp_aux_set_length(mtk_dp, length); + + if (!is_read) { + if (length) + mtk_dp_aux_fill_write_fifo(mtk_dp, buf, length); + + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_3704, + AUX_TX_FIFO_WRITE_DATA_NEW_MODE_TOGGLE_AUX_TX_P0_MASK, + AUX_TX_FIFO_WRITE_DATA_NEW_MODE_TOGGLE_AUX_TX_P0_MASK); + + if (ret) + return ret; + } + + mtk_dp_aux_request_ready(mtk_dp); + + ret = mtk_dp_aux_wait_for_completion(mtk_dp, is_read); + + reply_cmd = mtk_dp_read(mtk_dp, MTK_DP_AUX_P0_3624) & + AUX_RX_REPLY_COMMAND_AUX_TX_P0_MASK; + + if (ret || reply_cmd) { + u32 phy_status = mtk_dp_read(mtk_dp, MTK_DP_AUX_P0_3628) & + AUX_RX_PHY_STATE_AUX_TX_P0_MASK; + if (phy_status != AUX_RX_PHY_STATE_AUX_TX_P0_RX_IDLE) { + drm_err(mtk_dp->drm_dev, + "AUX Rx Aux hang, need SW reset\n"); + return -EIO; + } + + mtk_dp_aux_cmd_complete(mtk_dp); + mtk_dp_aux_irq_clear(mtk_dp); + + return -ETIMEDOUT; + } + + if (!length) { + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_362C, 0, + AUX_NO_LENGTH_AUX_TX_P0_MASK | + AUX_TX_AUXTX_OV_EN_AUX_TX_P0_MASK | + AUX_RESERVED_RW_0_AUX_TX_P0_MASK); + + if (ret) + return ret; + + } else if (is_read) { + int read_delay; + + if (cmd == (DP_AUX_I2C_READ | DP_AUX_I2C_MOT) || + cmd == DP_AUX_I2C_READ) + read_delay = 500; + else + read_delay = 100; + + mtk_dp_aux_read_rx_fifo(mtk_dp, buf, length, read_delay); + } + + mtk_dp_aux_cmd_complete(mtk_dp); + mtk_dp_aux_irq_clear(mtk_dp); + + return 0; +} + +static bool mtk_dp_set_swing_pre_emphasis(struct mtk_dp *mtk_dp, int lane_num, + int swing_val, int preemphasis) +{ + int ret; + + u32 lane_shift = lane_num * DP_TX1_VOLT_SWING_SHIFT; + + if (lane_num < 0 || lane_num > 3) + return false; + + dev_dbg(mtk_dp->dev, + "link training swing_val= 0x%x, preemphasis = 0x%x\n", + swing_val, preemphasis); + + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_SWING_EMP, + swing_val << (DP_TX0_VOLT_SWING_SHIFT + lane_shift), + DP_TX0_VOLT_SWING_MASK << lane_shift); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_SWING_EMP, + preemphasis << (DP_TX0_PRE_EMPH_SHIFT + lane_shift), + DP_TX0_PRE_EMPH_MASK << lane_shift); + + return !ret; +} + +static int mtk_dp_reset_swing_pre_emphasis(struct mtk_dp *mtk_dp) +{ + return mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_SWING_EMP, 0, + DP_TX0_VOLT_SWING_MASK | DP_TX1_VOLT_SWING_MASK | + DP_TX2_VOLT_SWING_MASK | + DP_TX3_VOLT_SWING_MASK | + DP_TX0_PRE_EMPH_MASK | DP_TX1_PRE_EMPH_MASK | + DP_TX2_PRE_EMPH_MASK | DP_TX3_PRE_EMPH_MASK); +} + +static int mtk_dp_fec_enable(struct mtk_dp *mtk_dp, bool enable) +{ + return mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_3540, + enable ? BIT(FEC_EN_DP_TRANS_P0_SHIFT) : 0, + FEC_EN_DP_TRANS_P0_MASK); +} + +static u32 mtk_dp_swirq_get_clear(struct mtk_dp *mtk_dp) +{ + int ret; + + u32 irq_status = mtk_dp_read(mtk_dp, MTK_DP_TRANS_P0_35D0) & + SW_IRQ_FINAL_STATUS_DP_TRANS_P0_MASK; + + if (irq_status) { + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_35C8, irq_status, + SW_IRQ_CLR_DP_TRANS_P0_MASK); + if (ret) + return ret; + + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_35C8, 0, + SW_IRQ_CLR_DP_TRANS_P0_MASK); + if (ret) + return ret; + } + + return irq_status; +} + +static u32 mtk_dp_hwirq_get_clear(struct mtk_dp *mtk_dp) +{ + int ret; + + u8 irq_status = (mtk_dp_read(mtk_dp, MTK_DP_TRANS_P0_3418) & + IRQ_STATUS_DP_TRANS_P0_MASK) >> + IRQ_STATUS_DP_TRANS_P0_SHIFT; + + if (irq_status) { + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_3418, irq_status, + IRQ_CLR_DP_TRANS_P0_MASK); + if (ret) + return ret; + + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_3418, 0, + IRQ_CLR_DP_TRANS_P0_MASK); + if (ret) + return ret; + } + + return irq_status; +} + +static int mtk_dp_hwirq_enable(struct mtk_dp *mtk_dp, bool enable) +{ + u32 val = enable ? 0 : IRQ_MASK_DP_TRANS_P0_DISC_IRQ | + IRQ_MASK_DP_TRANS_P0_CONN_IRQ | + IRQ_MASK_DP_TRANS_P0_INT_IRQ; + + return mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_3418, val, + IRQ_MASK_DP_TRANS_P0_MASK); +} + +static int mtk_dp_initialize_settings(struct mtk_dp *mtk_dp) +{ + int ret; + + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_342C, + XTAL_FREQ_DP_TRANS_P0_DEFAULT, + XTAL_FREQ_DP_TRANS_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_3540, + BIT(FEC_CLOCK_EN_MODE_DP_TRANS_P0_SHIFT), + FEC_CLOCK_EN_MODE_DP_TRANS_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_31EC, + BIT(AUDIO_CH_SRC_SEL_DP_ENC0_P0_SHIFT), + AUDIO_CH_SRC_SEL_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_304C, 0, + SDP_VSYNC_RISING_MASK_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_IRQ_MASK, IRQ_MASK_AUX_TOP_IRQ, + IRQ_MASK_AUX_TOP_IRQ); + + return ret; +} + +static void mtk_dp_initialize_hpd_detect_settings(struct mtk_dp *mtk_dp) +{ + /* Debounce threshold */ + mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_3410, + 8 << HPD_DEB_THD_DP_TRANS_P0_SHIFT, + HPD_DEB_THD_DP_TRANS_P0_MASK); + mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_3410, + (HPD_INT_THD_DP_TRANS_P0_LOWER_500US | + HPD_INT_THD_DP_TRANS_P0_UPPER_1100US) + << HPD_INT_THD_DP_TRANS_P0_SHIFT, + HPD_INT_THD_DP_TRANS_P0_MASK); + + /* Connect threshold 1.5ms + 5 x 0.1ms = 2ms + * Disconnect threshold 1.5ms + 5 x 0.1ms = 2ms */ + mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_3410, + (5 << HPD_DISC_THD_DP_TRANS_P0_SHIFT) | + (5 << HPD_CONN_THD_DP_TRANS_P0_SHIFT), + HPD_DISC_THD_DP_TRANS_P0_MASK | + HPD_CONN_THD_DP_TRANS_P0_MASK); + mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_3430, + HPD_INT_THD_ECO_DP_TRANS_P0_HIGH_BOUND_EXT, + HPD_INT_THD_ECO_DP_TRANS_P0_MASK); +} + +static int mtk_dp_initialize_aux_settings(struct mtk_dp *mtk_dp) +{ + int ret; + + /* modify timeout threshold = 1595 [12 : 8] */ + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_360C, 0x1595, + AUX_TIMEOUT_THR_AUX_TX_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_3658, 0, + AUX_TX_OV_EN_AUX_TX_P0_MASK); + if (ret) + return ret; + /* 25 for 26M */ + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_3634, + 25 << AUX_TX_OVER_SAMPLE_RATE_AUX_TX_P0_SHIFT, + AUX_TX_OVER_SAMPLE_RATE_AUX_TX_P0_MASK); + if (ret) + return ret; + /* 13 for 26M */ + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_3614, + 13 << AUX_RX_UI_CNT_THR_AUX_TX_P0_SHIFT, + AUX_RX_UI_CNT_THR_AUX_TX_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_37C8, + BIT(MTK_ATOP_EN_AUX_TX_P0_SHIFT), + MTK_ATOP_EN_AUX_TX_P0_MASK); + + return ret; +} + +static int mtk_dp_initialize_digital_settings(struct mtk_dp *mtk_dp) +{ + int ret; + + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_304C, 0, + VBID_VIDEO_MUTE_DP_ENC0_P0_MASK); + if (ret) + return ret; + mtk_dp_set_color_format(mtk_dp, DP_PIXELFORMAT_RGB); + mtk_dp_set_color_depth(mtk_dp, MTK_DP_COLOR_DEPTH_8BIT); + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC1_P0_3368, + 1 << BS2BS_MODE_DP_ENC1_P0_SHIFT, + BS2BS_MODE_DP_ENC1_P0_MASK); + if (ret) + return ret; + + /* dp tx encoder reset all sw */ + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3004, + BIT(DP_TX_ENCODER_4P_RESET_SW_DP_ENC0_P0_SHIFT), + DP_TX_ENCODER_4P_RESET_SW_DP_ENC0_P0_MASK); + if (ret) + return ret; + /* Wait for sw reset to complete */ + usleep_range(1000, 5000); + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3004, 0, + DP_TX_ENCODER_4P_RESET_SW_DP_ENC0_P0_MASK); + + return ret; +} + +static int mtk_dp_digital_sw_reset(struct mtk_dp *mtk_dp) +{ + int ret; + + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_340C, + BIT(DP_TX_TRANSMITTER_4P_RESET_SW_DP_TRANS_P0_SHIFT), + DP_TX_TRANSMITTER_4P_RESET_SW_DP_TRANS_P0_MASK); + if (ret) + return ret; + /* Wait for sw reset to complete */ + usleep_range(1000, 5000); + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_340C, 0, + DP_TX_TRANSMITTER_4P_RESET_SW_DP_TRANS_P0_MASK); + + return ret; +} + +static int mtk_dp_set_lanes(struct mtk_dp *mtk_dp, int lanes) +{ + int ret; + + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_35F0, + lanes == 0 ? 0 : BIT(3), BIT(3) | BIT(2)); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3000, lanes, + LANE_NUM_DP_ENC0_P0_MASK); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_34A4, + lanes << LANE_NUM_DP_TRANS_P0_SHIFT, + LANE_NUM_DP_TRANS_P0_MASK); + + return ret; +} + +static int link_rate_to_mb_per_s(struct mtk_dp *mtk_dp, + enum mtk_dp_linkrate linkrate) +{ + switch (linkrate) { + case MTK_DP_LINKRATE_RBR: + return 1620; + case MTK_DP_LINKRATE_HBR: + return 2700; + case MTK_DP_LINKRATE_HBR2: + return 5400; + case MTK_DP_LINKRATE_HBR3: + return 8100; + default: + drm_err(mtk_dp->drm_dev, + "Implementation error, unknown linkrate %d\n", + linkrate); + return -EINVAL; + } +} + +static u32 check_cal_data_valid(struct mtk_dp *mtk_dp, u32 min, u32 max, u32 val, u32 default_val) +{ + if (val < min || val > max) + dev_warn(mtk_dp->dev, "Invalid calibration data: %d (< %d || > %d), returning default %d\n", + val, min, max, default_val); + return default_val; + + return val; +} + +static int mtk_dp_get_calibration_data(struct mtk_dp *mtk_dp) +{ + struct dp_cal_data *cal_data = &mtk_dp->cal_data; + struct device *dev = mtk_dp->dev; + struct nvmem_cell *cell; + u32 *buf; + size_t len; + + cell = nvmem_cell_get(dev, "dp_calibration_data"); + if (IS_ERR(cell)) { + dev_err(dev, + "Error: Failed to get nvmem cell dp_calibration_data\n"); + return PTR_ERR(cell); + } + + buf = (u32 *)nvmem_cell_read(cell, &len); + nvmem_cell_put(cell); + + if (IS_ERR(buf) || ((len / sizeof(u32)) != 4)) { + dev_err(dev, + "Error: Failed to read nvmem_cell_read fail len %ld\n", + (len / sizeof(u32))); + return PTR_ERR(buf); + } + + cal_data->ln_tx_impsel_nmos = devm_kmalloc(mtk_dp->dev, + mtk_dp->max_lanes * sizeof(unsigned int), GFP_KERNEL); + if (!cal_data->ln_tx_impsel_nmos) + return -ENOMEM; + + cal_data->ln_tx_impsel_pmos = devm_kmalloc(mtk_dp->dev, + mtk_dp->max_lanes * sizeof(unsigned int), GFP_KERNEL); + if (!cal_data->ln_tx_impsel_pmos) + return -ENOMEM; + + cal_data->glb_bias_trim = + check_cal_data_valid(mtk_dp, 1, 0x1e, (buf[3] >> 27) & 0x1f, 0xf); + cal_data->clktx_impse = + check_cal_data_valid(mtk_dp, 1, 0xe, (buf[0] >> 9) & 0xf, 0x8); + cal_data->ln_tx_impsel_pmos[0] = + check_cal_data_valid(mtk_dp, 1, 0xe, (buf[2] >> 28) & 0xf, 0x8); + cal_data->ln_tx_impsel_nmos[0] = + check_cal_data_valid(mtk_dp, 1, 0xe, (buf[2] >> 24) & 0xf, 0x8); + cal_data->ln_tx_impsel_pmos[1] = + check_cal_data_valid(mtk_dp, 1, 0xe, (buf[2] >> 20) & 0xf, 0x8); + cal_data->ln_tx_impsel_nmos[1] = + check_cal_data_valid(mtk_dp, 1, 0xe, (buf[2] >> 16) & 0xf, 0x8); + cal_data->ln_tx_impsel_pmos[2] = + check_cal_data_valid(mtk_dp, 1, 0xe, (buf[2] >> 12) & 0xf, 0x8); + cal_data->ln_tx_impsel_nmos[2] = + check_cal_data_valid(mtk_dp, 1, 0xe, (buf[2] >> 8) & 0xf, 0x8); + cal_data->ln_tx_impsel_pmos[3] = + check_cal_data_valid(mtk_dp, 1, 0xe, (buf[2] >> 4) & 0xf, 0x8); + cal_data->ln_tx_impsel_nmos[3] = + check_cal_data_valid(mtk_dp, 1, 0xe, buf[2] & 0xf, 0x8); + + kfree(buf); + + return 0; +} + +static int mtk_dp_set_cal_data(struct mtk_dp *mtk_dp) +{ + int ret; + struct dp_cal_data *cal_data = &mtk_dp->cal_data; + + ret = mtk_dp_update_bits(mtk_dp, DP_PHY_GLB_DPAUX_TX, + cal_data->clktx_impse << 20, RG_CKM_PT0_CKTX_IMPSEL); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, DP_PHY_GLB_BIAS_GEN_00, + cal_data->glb_bias_trim << 16, + RG_XTP_GLB_BIAS_INTR_CTRL); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, DP_PHY_LANE_TX_0, + cal_data->ln_tx_impsel_pmos[0] << 12, + RG_XTP_LN0_TX_IMPSEL_PMOS); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, DP_PHY_LANE_TX_0, + cal_data->ln_tx_impsel_nmos[0] << 16, + RG_XTP_LN0_TX_IMPSEL_NMOS); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, DP_PHY_LANE_TX_1, + cal_data->ln_tx_impsel_pmos[1] << 12, + RG_XTP_LN1_TX_IMPSEL_PMOS); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, DP_PHY_LANE_TX_1, + cal_data->ln_tx_impsel_nmos[1] << 16, + RG_XTP_LN1_TX_IMPSEL_NMOS); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, DP_PHY_LANE_TX_2, + cal_data->ln_tx_impsel_pmos[2] << 12, + RG_XTP_LN2_TX_IMPSEL_PMOS); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, DP_PHY_LANE_TX_2, + cal_data->ln_tx_impsel_nmos[2] << 16, + RG_XTP_LN2_TX_IMPSEL_NMOS); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, DP_PHY_LANE_TX_3, + cal_data->ln_tx_impsel_pmos[3] << 12, + RG_XTP_LN3_TX_IMPSEL_PMOS); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, DP_PHY_LANE_TX_3, + cal_data->ln_tx_impsel_nmos[3] << 16, + RG_XTP_LN3_TX_IMPSEL_NMOS); + + return ret; +} + +static int mtk_dp_phy_configure(struct mtk_dp *mtk_dp, + enum mtk_dp_linkrate link_rate, int lane_count) +{ + int ret; + union phy_configure_opts phy_opts = { + .dp = { + .link_rate = link_rate_to_mb_per_s(mtk_dp, link_rate), + .set_rate = 1, + .lanes = lane_count, + .set_lanes = 1, + .ssc = mtk_dp->train_info.sink_ssc, + } + }; + + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE, DP_PWR_STATE_BANDGAP, + DP_PWR_STATE_MASK); + if (ret) + return ret; + + ret = phy_configure(mtk_dp->phy, &phy_opts); + + if (ret) + return ret; + + mtk_dp_set_cal_data(mtk_dp); + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE, + DP_PWR_STATE_BANDGAP_TPLL_LANE, DP_PWR_STATE_MASK); + + return ret; +} + +static int mtk_dp_set_idle_pattern(struct mtk_dp *mtk_dp, bool enable) +{ + const u32 val = POST_MISC_DATA_LANE0_OV_DP_TRANS_P0_MASK | + POST_MISC_DATA_LANE1_OV_DP_TRANS_P0_MASK | + POST_MISC_DATA_LANE2_OV_DP_TRANS_P0_MASK | + POST_MISC_DATA_LANE3_OV_DP_TRANS_P0_MASK; + return mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_3580, enable ? val : 0, val); +} + +static int mtk_dp_train_set_pattern(struct mtk_dp *mtk_dp, int pattern) +{ + int ret; + + if (pattern < 0 || pattern > 4) { + drm_err(mtk_dp->drm_dev, + "Implementation error, no such pattern %d\n", pattern); + return -EINVAL; + } + + if (pattern == 1) { /* TPS1 */ + ret = mtk_dp_set_idle_pattern(mtk_dp, false); + if (ret) + return ret; + } + + return mtk_dp_update_bits(mtk_dp, + MTK_DP_TRANS_P0_3400, + pattern ? BIT(pattern - 1) << PATTERN1_EN_DP_TRANS_P0_SHIFT : 0, + PATTERN1_EN_DP_TRANS_P0_MASK | PATTERN2_EN_DP_TRANS_P0_MASK | + PATTERN3_EN_DP_TRANS_P0_MASK | + PATTERN4_EN_DP_TRANS_P0_MASK); +} + +static int mtk_dp_set_enhanced_frame_mode(struct mtk_dp *mtk_dp, bool enable) +{ + return mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3000, + enable ? BIT(ENHANCED_FRAME_EN_DP_ENC0_P0_SHIFT) : 0, + ENHANCED_FRAME_EN_DP_ENC0_P0_MASK); +} + +static int mtk_dp_training_set_scramble(struct mtk_dp *mtk_dp, bool enable) +{ + return mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_3404, + enable ? DP_SCR_EN_DP_TRANS_P0_MASK : 0, + DP_SCR_EN_DP_TRANS_P0_MASK); +} + +static void mtk_dp_video_mute(struct mtk_dp *mtk_dp, bool enable) +{ + u32 val = BIT(VIDEO_MUTE_SEL_DP_ENC0_P0_SHIFT); + + if (enable) + val |= BIT(VIDEO_MUTE_SW_DP_ENC0_P0_SHIFT); + mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3000, val, + VIDEO_MUTE_SEL_DP_ENC0_P0_MASK | + VIDEO_MUTE_SW_DP_ENC0_P0_MASK); + + mtk_dp_sip_atf_call(MTK_DP_SIP_ATF_EDP_VIDEO_UNMUTE, enable); +} + +static int mtk_dp_power_enable(struct mtk_dp *mtk_dp) +{ + int ret; + + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_RESET_AND_PROBE, 0, + SW_RST_B_PHYD); + if (ret) + return ret; + /* Wait for power enable */ + usleep_range(10, 200); + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_RESET_AND_PROBE, SW_RST_B_PHYD, + SW_RST_B_PHYD); + if (ret) + return ret; + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE, + DP_PWR_STATE_BANDGAP_TPLL, + DP_PWR_STATE_MASK); + + return ret; +} + +static int mtk_dp_power_disable(struct mtk_dp *mtk_dp) +{ + int ret; + + ret = mtk_dp_write(mtk_dp, MTK_DP_TOP_PWR_STATE, 0); + + if (ret) + return ret; + + ret = mtk_dp_write(mtk_dp, MTK_DP_0034, + DA_CKM_CKTX0_EN_FORCE_EN | DA_CKM_BIAS_LPF_EN_FORCE_VAL | + DA_CKM_BIAS_EN_FORCE_VAL | + DA_XTP_GLB_LDO_EN_FORCE_VAL | + DA_XTP_GLB_AVD10_ON_FORCE_VAL); + + if (ret) + return ret; + + /* Disable RX */ + ret = mtk_dp_write(mtk_dp, MTK_DP_1040, 0); + + if (ret) + return ret; + + ret = mtk_dp_write(mtk_dp, MTK_DP_TOP_MEM_PD, + 0x550 | BIT(FUSE_SEL_SHIFT) | BIT(MEM_ISO_EN_SHIFT)); + + return ret; +} + +static void mtk_dp_initialize_priv_data(struct mtk_dp *mtk_dp) +{ + mtk_dp->train_info.link_rate = MTK_DP_LINKRATE_HBR2; + mtk_dp->train_info.lane_count = mtk_dp->max_lanes; + mtk_dp->train_info.irq_status = 0; + mtk_dp->train_info.cable_plugged_in = false; + mtk_dp->train_info.cable_state_change = false; + mtk_dp->train_state = MTK_DP_TRAIN_STATE_STARTUP; + mtk_dp->state = MTK_DP_STATE_INITIAL; + + mtk_dp->info.format = DP_PIXELFORMAT_RGB; + mtk_dp->info.depth = MTK_DP_COLOR_DEPTH_8BIT; + memset(&mtk_dp->info.timings, 0, sizeof(struct mtk_dp_timings)); + mtk_dp->info.timings.frame_rate = 60; + + mtk_dp->has_fec = false; +} + +static void mtk_dp_setup_tu(struct mtk_dp *mtk_dp) +{ + u32 sram_read_start = MTK_DP_TBC_BUF_READ_START_ADDR; + + if (mtk_dp->train_info.lane_count > 0) { + sram_read_start = min_t(u32, + MTK_DP_TBC_BUF_READ_START_ADDR, + mtk_dp->info.timings.vm.hactive / + mtk_dp->train_info.lane_count / + MTK_DP_4P1T / MTK_DP_HDE / MTK_DP_PIX_PER_ADDR); + mtk_dp_set_sram_read_start(mtk_dp, sram_read_start); + } + + mtk_dp_setup_encoder(mtk_dp); +} + +static void mtk_dp_calculate_pixrate(struct mtk_dp *mtk_dp) +{ + u8 target_frame_rate = 60; + u32 target_pixel_clk; + struct drm_display_mode mode; + struct mtk_dp_timings *timings = &mtk_dp->info.timings; + + drm_display_mode_from_videomode(&timings->vm, &mode); + + if (mtk_dp->info.timings.frame_rate > 0) { + target_frame_rate = mtk_dp->info.timings.frame_rate; + target_pixel_clk = mode.htotal * + mode.vtotal * + target_frame_rate; + } else if (mtk_dp->info.timings.pix_rate_khz > 0) { + target_pixel_clk = mtk_dp->info.timings.pix_rate_khz * 1000; + } else { + target_pixel_clk = mode.htotal * + mode.vtotal * + target_frame_rate; + } + + mtk_dp->info.timings.pix_rate_khz = target_pixel_clk / 1000; +} + +static void mtk_dp_set_tx_out(struct mtk_dp *mtk_dp) +{ + mtk_dp_msa_bypass_disable(mtk_dp); + mtk_dp_calculate_pixrate(mtk_dp); + mtk_dp_pg_disable(mtk_dp); + mtk_dp_setup_tu(mtk_dp); +} + +static int mtk_dp_hpd_sink_event(struct mtk_dp *mtk_dp) +{ + ssize_t ret; + u8 sink_count; + bool locked; + u8 link_status[DP_LINK_STATUS_SIZE] = {}; + u32 sink_count_reg = DP_SINK_COUNT_ESI; + u32 link_status_reg = DP_LANE0_1_STATUS; + + ret = drm_dp_dpcd_readb(&mtk_dp->aux, sink_count_reg, &sink_count); + if (ret < 0) { + drm_err(mtk_dp->drm_dev, "Read sink count failed: %ld\n", ret); + return ret; + } + + ret = drm_dp_dpcd_read(&mtk_dp->aux, link_status_reg, link_status, + sizeof(link_status)); + if (!ret) { + drm_err(mtk_dp->drm_dev, "Read link status failed: %ld\n", + ret); + return ret; + } + + locked = drm_dp_channel_eq_ok(link_status, + mtk_dp->train_info.lane_count); + if (!locked && mtk_dp->train_state > MTK_DP_TRAIN_STATE_TRAINING_PRE) + mtk_dp->train_state = MTK_DP_TRAIN_STATE_TRAINING_PRE; + + if (link_status[1] & DP_REMOTE_CONTROL_COMMAND_PENDING) + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_DEVICE_SERVICE_IRQ_VECTOR, + DP_REMOTE_CONTROL_COMMAND_PENDING); + + if (DP_GET_SINK_COUNT(sink_count) && + (link_status[2] & DP_DOWNSTREAM_PORT_STATUS_CHANGED)) { + mtk_dp->train_info.check_cap_count = 0; + mtk_dp->train_state = MTK_DP_TRAIN_STATE_CHECKEDID; + msleep(20); + } + + return 0; +} + +static void mtk_dp_train_update_swing_pre(struct mtk_dp *mtk_dp, int lanes, + u8 dpcd_adjust_req[2]) +{ + int lane; + + for (lane = 0; lane < lanes; ++lane) { + u8 val; + u8 swing; + u8 preemphasis; + int index = lane / 2; + int shift = lane % 2 ? DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT : 0; + + swing = (dpcd_adjust_req[index] >> shift) & + DP_ADJUST_VOLTAGE_SWING_LANE0_MASK; + preemphasis = ((dpcd_adjust_req[index] >> shift) & + DP_ADJUST_PRE_EMPHASIS_LANE0_MASK) >> + DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT; + val = swing << DP_TRAIN_VOLTAGE_SWING_SHIFT | + preemphasis << DP_TRAIN_PRE_EMPHASIS_SHIFT; + + if (swing == DP_TRAIN_VOLTAGE_SWING_LEVEL_3) + val |= DP_TRAIN_MAX_SWING_REACHED; + if (preemphasis == 3) + val |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; + + mtk_dp_set_swing_pre_emphasis(mtk_dp, lane, swing, preemphasis); + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_TRAINING_LANE0_SET + lane, + val); + } +} + +static void mtk_dp_read_link_status(struct mtk_dp *mtk_dp, + u8 link_status[DP_LINK_STATUS_SIZE]) +{ + drm_dp_dpcd_read(&mtk_dp->aux, DP_LANE0_1_STATUS, link_status, + DP_LINK_STATUS_SIZE); +} + +static int mtk_dp_train_tps_1(struct mtk_dp *mtk_dp, + u8 target_lane_count, int *iteration_count, u8 *lane_adjust, int *status_control, u8 *prev_lane_adjust) +{ + int ret; + u8 val; + u8 link_status[DP_LINK_STATUS_SIZE] = {}; + + ret = mtk_dp_training_set_scramble(mtk_dp, false); + if (ret) + return ret; + + if (*status_control == 0) { + ret = mtk_dp_train_set_pattern(mtk_dp, 1); + if (ret) + return ret; + + val = DP_LINK_SCRAMBLING_DISABLE | + DP_TRAINING_PATTERN_1; + drm_dp_dpcd_writeb(&mtk_dp->aux, + DP_TRAINING_PATTERN_SET, + DP_LINK_SCRAMBLING_DISABLE | + DP_TRAINING_PATTERN_1); + drm_dp_dpcd_read(&mtk_dp->aux, + DP_ADJUST_REQUEST_LANE0_1, + lane_adjust, + sizeof(*lane_adjust) * 2); + + mtk_dp_train_update_swing_pre(mtk_dp, + target_lane_count, lane_adjust); + *status_control = 1; + (*iteration_count)++; + } + + drm_dp_link_train_clock_recovery_delay(&mtk_dp->aux, + mtk_dp->rx_cap); + mtk_dp_read_link_status(mtk_dp, link_status); + + if (drm_dp_clock_recovery_ok(link_status, + target_lane_count)) { + mtk_dp->train_info.cr_done = true; + *iteration_count = 1; + dev_dbg(mtk_dp->dev, "Link train CR pass\n"); + return 0; + } else if (*prev_lane_adjust == link_status[4]) { + (*iteration_count)++; + if (*prev_lane_adjust & DP_ADJUST_VOLTAGE_SWING_LANE0_MASK) { + dev_dbg(mtk_dp->dev, "Link train CQ fail\n"); + return -EINVAL; + } + } else { + *prev_lane_adjust = link_status[4]; + } + return -EAGAIN; +} + +static int mtk_dp_train_tps_2_3(struct mtk_dp *mtk_dp, u8 target_linkrate, + u8 target_lane_count, int *iteration_count, u8 *lane_adjust, int *status_control, u8 *prev_lane_adjust) +{ + int ret; + u8 val; + u8 link_status[DP_LINK_STATUS_SIZE] = {}; + + if (*status_control == 1) { + if (mtk_dp->train_info.tps4) { + ret = mtk_dp_train_set_pattern(mtk_dp, 4); + if (ret) + return -EINVAL; + + val = DP_TRAINING_PATTERN_4; + } else if (mtk_dp->train_info.tps3) { + ret = mtk_dp_train_set_pattern(mtk_dp, 3); + if (ret) + return -EINVAL; + + val = DP_LINK_SCRAMBLING_DISABLE | + DP_TRAINING_PATTERN_3; + } else { + ret = mtk_dp_train_set_pattern(mtk_dp, 2); + if (ret) + return -EINVAL; + + val = DP_LINK_SCRAMBLING_DISABLE | + DP_TRAINING_PATTERN_2; + } + drm_dp_dpcd_writeb(&mtk_dp->aux, + DP_TRAINING_PATTERN_SET, + val); + + drm_dp_dpcd_read(&mtk_dp->aux, + DP_ADJUST_REQUEST_LANE0_1, + lane_adjust, + sizeof(*lane_adjust) * 2); + + mtk_dp_train_update_swing_pre(mtk_dp, + target_lane_count, lane_adjust); + *status_control = 2; + (*iteration_count)++; + } + + drm_dp_link_train_channel_eq_delay(&mtk_dp->aux, + mtk_dp->rx_cap); + + mtk_dp_read_link_status(mtk_dp, link_status); + + if (!drm_dp_clock_recovery_ok(link_status, + target_lane_count)) { + mtk_dp->train_info.cr_done = false; + mtk_dp->train_info.eq_done = false; + dev_dbg(mtk_dp->dev, "Link train EQ fail\n"); + return -EINVAL; + } + + if (drm_dp_channel_eq_ok(link_status, + target_lane_count)) { + mtk_dp->train_info.eq_done = true; + dev_dbg(mtk_dp->dev, "Link train EQ pass\n"); + return 0; + } + + if (*prev_lane_adjust == link_status[4]) + (*iteration_count)++; + else + *prev_lane_adjust = link_status[4]; + + return -EAGAIN; +} + +static int mtk_dp_train_flow(struct mtk_dp *mtk_dp, u8 target_link_rate, + u8 target_lane_count) +{ + u8 lane_adjust[2] = {}; + bool pass_tps1 = false; + bool pass_tps2_3 = false; + int train_retries; + int status_control; + int iteration_count; + int ret; + u8 prev_lane_adjust; + + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_LINK_BW_SET, target_link_rate); + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_LANE_COUNT_SET, + target_lane_count | DP_LANE_COUNT_ENHANCED_FRAME_EN); + + if (mtk_dp->train_info.sink_ssc) + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_DOWNSPREAD_CTRL, + DP_SPREAD_AMP_0_5); + + train_retries = 0; + status_control = 0; + iteration_count = 1; + prev_lane_adjust = 0xFF; + + mtk_dp_set_lanes(mtk_dp, target_lane_count / 2); + ret = mtk_dp_phy_configure(mtk_dp, target_link_rate, target_lane_count); + if (ret) + return -EINVAL; + + dev_dbg(mtk_dp->dev, + "Link train target_link_rate = 0x%x, target_lane_count = 0x%x\n", + target_link_rate, target_lane_count); + + do { + train_retries++; + if (!mtk_dp->train_info.cable_plugged_in || + ((mtk_dp->train_info.irq_status & MTK_DP_HPD_DISCONNECT) != + 0x0)) { + return -ENODEV; + } + + if (mtk_dp->train_state < MTK_DP_TRAIN_STATE_TRAINING) + return -EAGAIN; + + if (!pass_tps1) { + ret = mtk_dp_train_tps_1(mtk_dp, target_lane_count, &iteration_count, lane_adjust, &status_control, &prev_lane_adjust); + if (!ret) { + pass_tps1 = true; + train_retries = 0; + } else if (ret == -EINVAL) { + break; + } + } else { + ret = mtk_dp_train_tps_2_3(mtk_dp, target_link_rate, target_lane_count, &iteration_count, lane_adjust, &status_control, &prev_lane_adjust); + if (!ret) { + pass_tps2_3 = true; + break; + } else if (ret == -EINVAL) { + break; + } + } + + drm_dp_dpcd_read(&mtk_dp->aux, DP_ADJUST_REQUEST_LANE0_1, + lane_adjust, sizeof(lane_adjust)); + mtk_dp_train_update_swing_pre(mtk_dp, target_lane_count, + lane_adjust); + } while (train_retries < MTK_DP_TRAIN_RETRY_LIMIT && + iteration_count < MTK_DP_TRAIN_MAX_ITERATIONS); + + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_TRAINING_PATTERN_SET, + DP_TRAINING_PATTERN_DISABLE); + ret = mtk_dp_train_set_pattern(mtk_dp, 0); + if (ret) + return -EINVAL; + + if (!pass_tps2_3) + return -ETIMEDOUT; + + mtk_dp->train_info.link_rate = target_link_rate; + mtk_dp->train_info.lane_count = target_lane_count; + + ret = mtk_dp_training_set_scramble(mtk_dp, true); + if (ret) + return ret; + + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_LANE_COUNT_SET, + target_lane_count | + DP_LANE_COUNT_ENHANCED_FRAME_EN); + ret = mtk_dp_set_enhanced_frame_mode(mtk_dp, true); + + return ret; +} + +static bool mtk_dp_parse_capabilities(struct mtk_dp *mtk_dp) +{ + u8 buf[DP_RECEIVER_CAP_SIZE] = {}; + u8 val; + struct mtk_dp_train_info *train_info = &mtk_dp->train_info; + + if (!mtk_dp_plug_state(mtk_dp)) + return false; + + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, DP_SET_POWER_D0); + /* Wait for power on */ + usleep_range(2000, 5000); + + drm_dp_read_dpcd_caps(&mtk_dp->aux, buf); + + memcpy(mtk_dp->rx_cap, buf, min(sizeof(mtk_dp->rx_cap), sizeof(buf))); + mtk_dp->rx_cap[DP_TRAINING_AUX_RD_INTERVAL] &= DP_TRAINING_AUX_RD_MASK; + + train_info->link_rate = + min_t(int, mtk_dp->max_linkrate, buf[mtk_dp->max_linkrate]); + train_info->lane_count = + min_t(int, mtk_dp->max_lanes, drm_dp_max_lane_count(buf)); + + train_info->tps3 = drm_dp_tps3_supported(buf); + train_info->tps4 = drm_dp_tps4_supported(buf); + + train_info->sink_ssc = + !!(buf[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5); + + train_info->sink_ssc = false; + + drm_dp_dpcd_readb(&mtk_dp->aux, DP_MSTM_CAP, &val); + if (val & DP_MST_CAP) { + /* Clear DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 */ + drm_dp_dpcd_readb(&mtk_dp->aux, + DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0, &val); + if (val) + drm_dp_dpcd_writeb(&mtk_dp->aux, + DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0, + val); + } + + return true; +} + +static void mtk_dp_train_change_mode(struct mtk_dp *mtk_dp) +{ + phy_reset(mtk_dp->phy); + mtk_dp_reset_swing_pre_emphasis(mtk_dp); +} + +static int mtk_dp_train_start(struct mtk_dp *mtk_dp) +{ + int ret = 0; + u8 lane_count; + u8 link_rate; + u8 train_limit; + u8 max_link_rate; + u8 plug_wait; + + for (plug_wait = 7; !mtk_dp_plug_state(mtk_dp) && plug_wait > 0; + --plug_wait) + /* Avoid short pulses on the HPD isr */ + usleep_range(1000, 5000); + if (plug_wait == 0) { + mtk_dp->train_state = MTK_DP_TRAIN_STATE_DPIDLE; + return -ENODEV; + } + + link_rate = mtk_dp->rx_cap[1]; + lane_count = mtk_dp->rx_cap[2] & 0x1F; + + mtk_dp->train_info.link_rate = min(mtk_dp->max_linkrate, link_rate); + mtk_dp->train_info.lane_count = min(mtk_dp->max_lanes, lane_count); + link_rate = mtk_dp->train_info.link_rate; + lane_count = mtk_dp->train_info.lane_count; + + switch (link_rate) { + case MTK_DP_LINKRATE_RBR: + case MTK_DP_LINKRATE_HBR: + case MTK_DP_LINKRATE_HBR2: + case MTK_DP_LINKRATE_HBR25: + case MTK_DP_LINKRATE_HBR3: + break; + default: + mtk_dp->train_info.link_rate = MTK_DP_LINKRATE_HBR3; + break; + }; + + max_link_rate = link_rate; + for (train_limit = 6; train_limit > 0; train_limit--) { + mtk_dp->train_info.cr_done = false; + mtk_dp->train_info.eq_done = false; + + mtk_dp_train_change_mode(mtk_dp); + ret = mtk_dp_train_flow(mtk_dp, link_rate, lane_count); + if (ret) + return ret; + + if (!mtk_dp->train_info.cr_done) { + switch (link_rate) { + case MTK_DP_LINKRATE_RBR: + lane_count = lane_count / 2; + link_rate = max_link_rate; + if (lane_count == 0) { + mtk_dp->train_state = + MTK_DP_TRAIN_STATE_DPIDLE; + return -EIO; + } + break; + case MTK_DP_LINKRATE_HBR: + link_rate = MTK_DP_LINKRATE_RBR; + break; + case MTK_DP_LINKRATE_HBR2: + link_rate = MTK_DP_LINKRATE_HBR; + break; + case MTK_DP_LINKRATE_HBR3: + link_rate = MTK_DP_LINKRATE_HBR2; + break; + default: + return -EINVAL; + }; + } else if (!mtk_dp->train_info.eq_done) { + if (lane_count == 0) + return -EIO; + + lane_count /= 2; + } else { + break; + } + } + + if (train_limit == 0) + return -ETIMEDOUT; + + return 0; +} + +//TODO: check drm_dp_helpers for duplicated code + +static void mtk_dp_video_enable(struct mtk_dp *mtk_dp, bool enable) +{ + if (enable) { + mtk_dp_set_tx_out(mtk_dp); + mtk_dp_video_mute(mtk_dp, false); + } else { + mtk_dp_video_mute(mtk_dp, true); + } +} + +static void mtk_dp_video_config(struct mtk_dp *mtk_dp) +{ + mtk_dp_mn_overwrite_disable(mtk_dp); + + mtk_dp_set_msa(mtk_dp); + + mtk_dp_set_color_depth(mtk_dp, mtk_dp->info.depth); + mtk_dp_set_color_format(mtk_dp, mtk_dp->info.format); +} + +static void mtk_dp_state_handler(struct mtk_dp *mtk_dp) +{ + switch (mtk_dp->state) { + case MTK_DP_STATE_INITIAL: + mtk_dp_video_mute(mtk_dp, true); + mtk_dp->state = MTK_DP_STATE_IDLE; + break; + + case MTK_DP_STATE_IDLE: + if (mtk_dp->train_state == MTK_DP_TRAIN_STATE_NORMAL) + mtk_dp->state = MTK_DP_STATE_PREPARE; + break; + + case MTK_DP_STATE_PREPARE: + mtk_dp_video_config(mtk_dp); + mtk_dp_video_enable(mtk_dp, true); + + mtk_dp->state = MTK_DP_STATE_NORMAL; + break; + + case MTK_DP_STATE_NORMAL: + if (mtk_dp->train_state != MTK_DP_TRAIN_STATE_NORMAL) { + mtk_dp_video_mute(mtk_dp, true); + mtk_dp->state = MTK_DP_STATE_IDLE; + } + break; + + default: + break; + } +} + +static int mtk_dp_train_handler(struct mtk_dp *mtk_dp) +{ + bool training_done = false; + short max_retry = 50; + int ret = 0; + + do { + switch (mtk_dp->train_state) { + case MTK_DP_TRAIN_STATE_STARTUP: + mtk_dp_state_handler(mtk_dp); + mtk_dp->train_state = MTK_DP_TRAIN_STATE_CHECKCAP; + break; + + case MTK_DP_TRAIN_STATE_CHECKCAP: + if (mtk_dp_parse_capabilities(mtk_dp)) { + mtk_dp->train_info.check_cap_count = 0; + mtk_dp->train_state = MTK_DP_TRAIN_STATE_CHECKEDID; + } else { + mtk_dp->train_info.check_cap_count++; + + if (mtk_dp->train_info.check_cap_count > + MTK_DP_CHECK_SINK_CAP_TIMEOUT_COUNT) { + mtk_dp->train_info.check_cap_count = 0; + mtk_dp->train_state = MTK_DP_TRAIN_STATE_DPIDLE; + ret = -ETIMEDOUT; + } + } + break; + + case MTK_DP_TRAIN_STATE_CHECKEDID: + mtk_dp->train_state = MTK_DP_TRAIN_STATE_TRAINING_PRE; + break; + + case MTK_DP_TRAIN_STATE_TRAINING_PRE: + mtk_dp_state_handler(mtk_dp); + mtk_dp->train_state = MTK_DP_TRAIN_STATE_TRAINING; + break; + + case MTK_DP_TRAIN_STATE_TRAINING: + ret = mtk_dp_train_start(mtk_dp); + if (ret == 0) { + mtk_dp_video_mute(mtk_dp, true); + mtk_dp->train_state = MTK_DP_TRAIN_STATE_NORMAL; + mtk_dp_fec_enable(mtk_dp, mtk_dp->has_fec); + } else if (ret != -EAGAIN) { + mtk_dp->train_state = MTK_DP_TRAIN_STATE_DPIDLE; + } + break; + case MTK_DP_TRAIN_STATE_NORMAL: + mtk_dp_state_handler(mtk_dp); + training_done = true; + break; + case MTK_DP_TRAIN_STATE_DPIDLE: + break; + default: + break; + } + + if (ret) { + if (ret == -EAGAIN) + continue; + /* + * If we get any other error number, it doesn't + * make any sense to keep iterating. + */ + break; + } + } while (!training_done || --max_retry); + + return ret; +} + +static void mtk_dp_init_port(struct mtk_dp *mtk_dp) +{ + mtk_dp_set_idle_pattern(mtk_dp, true); + mtk_dp_initialize_priv_data(mtk_dp); + + mtk_dp_initialize_settings(mtk_dp); + mtk_dp_initialize_aux_settings(mtk_dp); + mtk_dp_initialize_digital_settings(mtk_dp); + mtk_dp_update_bits(mtk_dp, MTK_DP_AUX_P0_3690, + BIT(RX_REPLY_COMPLETE_MODE_AUX_TX_P0_SHIFT), + RX_REPLY_COMPLETE_MODE_AUX_TX_P0_MASK); + mtk_dp_initialize_hpd_detect_settings(mtk_dp); + + mtk_dp_digital_sw_reset(mtk_dp); +} + +static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev) +{ + struct mtk_dp *mtk_dp = dev; + int event; + u8 buf[DP_RECEIVER_CAP_SIZE] = {}; + + event = mtk_dp_plug_state(mtk_dp) ? connector_status_connected : + connector_status_disconnected; + + if (event < 0) + return IRQ_HANDLED; + + if (mtk_dp->drm_dev) { + dev_info(mtk_dp->dev, "drm_helper_hpd_irq_event\n"); + drm_helper_hpd_irq_event(mtk_dp->bridge.dev); + } + + if (mtk_dp->train_info.cable_state_change) { + mtk_dp->train_info.cable_state_change = false; + + mtk_dp->train_state = MTK_DP_TRAIN_STATE_STARTUP; + + if (!mtk_dp->train_info.cable_plugged_in || + !mtk_dp_plug_state(mtk_dp)) { + mtk_dp_video_mute(mtk_dp, true); + + mtk_dp_initialize_priv_data(mtk_dp); + mtk_dp_set_idle_pattern(mtk_dp, true); + if (mtk_dp->has_fec) + mtk_dp_fec_enable(mtk_dp, false); + + mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE, + DP_PWR_STATE_BANDGAP_TPLL, + DP_PWR_STATE_MASK); + } else { + mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE, + DP_PWR_STATE_BANDGAP_TPLL_LANE, + DP_PWR_STATE_MASK); + drm_dp_read_dpcd_caps(&mtk_dp->aux, buf); + mtk_dp->train_info.link_rate = + min_t(int, mtk_dp->max_linkrate, + buf[mtk_dp->max_linkrate]); + mtk_dp->train_info.lane_count = + min_t(int, mtk_dp->max_lanes, + drm_dp_max_lane_count(buf)); + } + } + + if (mtk_dp->train_info.irq_status & MTK_DP_HPD_INTERRUPT) { + dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n"); + mtk_dp->train_info.irq_status &= ~MTK_DP_HPD_INTERRUPT; + mtk_dp_hpd_sink_event(mtk_dp); + } + + return IRQ_HANDLED; +} + +static irqreturn_t mtk_dp_hpd_isr_handler(struct mtk_dp *mtk_dp) +{ + bool connected; + u16 swirq_status = mtk_dp_swirq_get_clear(mtk_dp); + u8 hwirq_status = mtk_dp_hwirq_get_clear(mtk_dp); + struct mtk_dp_train_info *train_info = &mtk_dp->train_info; + + train_info->irq_status |= hwirq_status | swirq_status; + + if (!train_info->irq_status) + return IRQ_HANDLED; + + connected = mtk_dp_plug_state(mtk_dp); + if (connected || !train_info->cable_plugged_in) + train_info->irq_status &= ~MTK_DP_HPD_DISCONNECT; + else if (!connected || train_info->cable_plugged_in) + train_info->irq_status &= ~MTK_DP_HPD_CONNECT; + + if (!(train_info->irq_status & + (MTK_DP_HPD_CONNECT | MTK_DP_HPD_DISCONNECT))) + return IRQ_HANDLED; + + if (train_info->irq_status & MTK_DP_HPD_CONNECT) { + train_info->irq_status &= ~MTK_DP_HPD_CONNECT; + train_info->cable_plugged_in = true; + } else { + train_info->irq_status &= ~MTK_DP_HPD_DISCONNECT; + train_info->cable_plugged_in = false; + mtk_dp->train_state = MTK_DP_TRAIN_STATE_STARTUP; + } + train_info->cable_state_change = true; + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t mtk_dp_hpd_event(int hpd, void *dev) +{ + struct mtk_dp *mtk_dp = dev; + u32 irq_status; + + irq_status = mtk_dp_read(mtk_dp, MTK_DP_TOP_IRQ_STATUS); + + if (!irq_status) + return IRQ_HANDLED; + + if (irq_status & RGS_IRQ_STATUS_TRANSMITTER) + return mtk_dp_hpd_isr_handler(mtk_dp); + + return IRQ_HANDLED; +} + +static int mtk_dp_dt_parse(struct mtk_dp *mtk_dp, + struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + int ret = 0; + void __iomem *base; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + mtk_dp->regs = devm_regmap_init_mmio(dev, base, &mtk_dp_regmap_config); + if (IS_ERR(mtk_dp->regs)) + return PTR_ERR(mtk_dp->regs); + + mtk_dp->dp_tx_clk = devm_clk_get(dev, "faxi"); + if (IS_ERR(mtk_dp->dp_tx_clk)) { + dev_err(dev, "Failed to get dptx clock: %d\n", ret); + mtk_dp->dp_tx_clk = NULL; + return PTR_ERR(mtk_dp->dp_tx_clk); + } + + ret = device_property_read_u8(dev, "max-lanes", &mtk_dp->max_lanes); + if (ret) + return ret; + + ret = device_property_read_u8(dev, "max-linkrate", &mtk_dp->max_linkrate); + + return ret; +} + +static struct edid *mtk_dp_get_edid(struct drm_bridge *bridge, + struct drm_connector *connector) +{ + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge); + bool enabled = mtk_dp->enabled; + struct edid *new_edid = NULL; + +//TODO: refcount enabled so that we don't have any surprises... + + if (!enabled) + drm_bridge_chain_pre_enable(bridge); + + if (mtk_dp_plug_state(mtk_dp)) + new_edid = drm_get_edid(connector, &mtk_dp->aux.ddc); + + if (!enabled) + drm_bridge_chain_post_disable(bridge); + + return new_edid; +} + +static ssize_t mtk_dp_aux_transfer(struct drm_dp_aux *mtk_aux, + struct drm_dp_aux_msg *msg) +{ + struct mtk_dp *mtk_dp; + bool is_read; + u8 request; + size_t accessed_bytes = 0; + int ret = 0; + + mtk_dp = container_of(mtk_aux, struct mtk_dp, aux); + + if (!mtk_dp->train_info.cable_plugged_in || + mtk_dp->train_info.irq_status & MTK_DP_HPD_DISCONNECT) { + mtk_dp->train_state = MTK_DP_TRAIN_STATE_CHECKCAP; + return -EAGAIN; + } + + switch (msg->request) { + case DP_AUX_I2C_MOT: + case DP_AUX_I2C_WRITE: + case DP_AUX_NATIVE_WRITE: + case DP_AUX_I2C_WRITE_STATUS_UPDATE: + case DP_AUX_I2C_WRITE_STATUS_UPDATE | DP_AUX_I2C_MOT: + request = msg->request & ~DP_AUX_I2C_WRITE_STATUS_UPDATE; + is_read = false; + break; + case DP_AUX_I2C_READ: + case DP_AUX_NATIVE_READ: + case DP_AUX_I2C_READ | DP_AUX_I2C_MOT: + request = msg->request; + is_read = true; + break; + default: + drm_err(mtk_aux->drm_dev, "invalid aux cmd = %d\n", + msg->request); + return -EINVAL; + } + + if (msg->size == 0) { + ret = mtk_dp_aux_do_transfer(mtk_dp, is_read, request, + msg->address + accessed_bytes, + msg->buffer + accessed_bytes, 0); + } else { + while (accessed_bytes < msg->size) { + size_t to_access = + min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES, + msg->size - accessed_bytes); + + ret = mtk_dp_aux_do_transfer(mtk_dp, + is_read, request, + msg->address + accessed_bytes, + msg->buffer + accessed_bytes, + to_access); + + if (ret) { + drm_info(mtk_dp->drm_dev, + "Failed to do AUX transfer: %d\n", ret); + break; + } + accessed_bytes += to_access; + } + } + + if (ret) { + msg->reply = DP_AUX_NATIVE_REPLY_NACK | DP_AUX_I2C_REPLY_NACK; + return ret; + } + + msg->reply = DP_AUX_NATIVE_REPLY_ACK | DP_AUX_I2C_REPLY_ACK; + return msg->size; +} + +static void mtk_dp_poweroff(struct mtk_dp *mtk_dp) +{ + mutex_lock(&mtk_dp->dp_lock); + + mtk_dp_hwirq_enable(mtk_dp, false); + mtk_dp_power_disable(mtk_dp); + phy_exit(mtk_dp->phy); + clk_disable_unprepare(mtk_dp->dp_tx_clk); + + mutex_unlock(&mtk_dp->dp_lock); +} + +static int mtk_dp_poweron(struct mtk_dp *mtk_dp) +{ + int ret = 0; + + mutex_lock(&mtk_dp->dp_lock); + + ret = clk_prepare_enable(mtk_dp->dp_tx_clk); + if (ret < 0) { + dev_err(mtk_dp->dev, "Fail to enable clock: %d\n", ret); + goto err; + } + ret = phy_init(mtk_dp->phy); + if (ret) { + dev_err(mtk_dp->dev, "Failed to initialize phy: %d\n", ret); + goto err_phy_init; + } + ret = mtk_dp_phy_configure(mtk_dp, MTK_DP_LINKRATE_RBR, 1); + if (ret) { + dev_err(mtk_dp->dev, "Failed to configure phy: %d\n", ret); + goto err_phy_config; + } + + mtk_dp_init_port(mtk_dp); + ret = mtk_dp_power_enable(mtk_dp); + mtk_dp_hwirq_enable(mtk_dp, true); + +err_phy_config: + phy_exit(mtk_dp->phy); +err_phy_init: + clk_disable_unprepare(mtk_dp->dp_tx_clk); +err: + mutex_unlock(&mtk_dp->dp_lock); + return ret; +} + +static int mtk_dp_bridge_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge); + int ret; + + ret = mtk_dp_poweron(mtk_dp); + if (ret) + return ret; + + if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) { + dev_err(mtk_dp->dev, "Driver does not provide a connector!"); + return -EINVAL; + } + + if (mtk_dp->next_bridge) { + ret = drm_bridge_attach(bridge->encoder, mtk_dp->next_bridge, + &mtk_dp->bridge, flags); + if (ret) { + drm_warn(mtk_dp->drm_dev, + "Failed to attach external bridge: %d\n", ret); + return ret; + } + } + + mtk_dp->drm_dev = bridge->dev; + + return 0; +} + +static void mtk_dp_bridge_detach(struct drm_bridge *bridge) +{ + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge); + + mtk_dp->drm_dev = NULL; +} + +static void mtk_dp_bridge_atomic_disable(struct drm_bridge *bridge, + struct drm_bridge_state *old_state) +{ + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge); + + mtk_dp_video_mute(mtk_dp, true); + mtk_dp->state = MTK_DP_STATE_IDLE; + mtk_dp->train_state = MTK_DP_TRAIN_STATE_STARTUP; + + mtk_dp->enabled = false; + /* Ensure the sink is muted before powering off */ + msleep(100); + mtk_dp_poweroff(mtk_dp); +} + +static void mtk_dp_parse_drm_mode_timings(struct mtk_dp *mtk_dp, + struct drm_display_mode *mode) +{ + struct mtk_dp_timings *timings = &mtk_dp->info.timings; + + drm_display_mode_to_videomode(mode, &timings->vm); + timings->frame_rate = drm_mode_vrefresh(mode); +} + +static void mtk_dp_bridge_atomic_enable(struct drm_bridge *bridge, + struct drm_bridge_state *old_state) +{ + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge); + + mtk_dp->conn = drm_atomic_get_new_connector_for_encoder(old_state->base.state, + bridge->encoder); + if (!mtk_dp->conn) { + drm_err(mtk_dp->drm_dev, + "Can't enable bridge as connector is missing\n"); + return; + } + + /* Training */ + if (mtk_dp_train_handler(mtk_dp)) { + drm_err(mtk_dp->drm_dev, "Training failed\n"); + return; + } + + mtk_dp->enabled = true; +} + +static enum drm_mode_status +mtk_dp_bridge_mode_valid(struct drm_bridge *bridge, + const struct drm_display_info *info, + const struct drm_display_mode *mode) +{ + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge); + u32 rx_linkrate = (u32)mtk_dp->train_info.link_rate * 27000; + u32 bpp = info->color_formats & DRM_COLOR_FORMAT_YCBCR422 ? 16 : 24; + + if (rx_linkrate * mtk_dp->train_info.lane_count < mode->clock * bpp / 8) + return MODE_CLOCK_HIGH; + + if (mode->clock > 600000) + return MODE_CLOCK_HIGH; + + if ((mode->clock * 1000) / (mode->htotal * mode->vtotal) > MTK_VDOSYS1_MAX_FRAMERATE) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +static u32 *mtk_dp_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state, + unsigned int *num_output_fmts) +{ + u32 *output_fmts; + + *num_output_fmts = 0; + output_fmts = kmalloc(sizeof(*output_fmts), GFP_KERNEL); + if (!output_fmts) + return NULL; + *num_output_fmts = 1; + output_fmts[0] = MEDIA_BUS_FMT_FIXED; + return output_fmts; +} + +static const u32 mt8195_input_fmts[] = { + MEDIA_BUS_FMT_RGB888_1X24, + MEDIA_BUS_FMT_YUV8_1X24, + MEDIA_BUS_FMT_YUYV8_1X16, +}; + +static u32 *mtk_dp_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state, + u32 output_fmt, + unsigned int *num_input_fmts) +{ + u32 *input_fmts; + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge); + struct drm_display_mode *mode = &crtc_state->adjusted_mode; + struct drm_display_info *display_info = + &conn_state->connector->display_info; + u32 rx_linkrate = (u32)mtk_dp->train_info.link_rate * 27000; + + *num_input_fmts = 0; + + if (((rx_linkrate * mtk_dp->train_info.lane_count) < + (mode->clock * 24 / 8)) && + ((rx_linkrate * mtk_dp->train_info.lane_count) > + (mode->clock * 16 / 8)) && + (display_info->color_formats & DRM_COLOR_FORMAT_YCBCR422)) { + input_fmts = kcalloc(1, sizeof(*input_fmts), GFP_KERNEL); + if (!input_fmts) + return NULL; + *num_input_fmts = 1; + input_fmts[0] = MEDIA_BUS_FMT_YUYV8_1X16; + } else { + input_fmts = kcalloc(ARRAY_SIZE(mt8195_input_fmts), sizeof(*input_fmts), + GFP_KERNEL); + if (!input_fmts) + return NULL; + + *num_input_fmts = ARRAY_SIZE(mt8195_input_fmts); + memcpy(input_fmts, mt8195_input_fmts, sizeof(mt8195_input_fmts)); + } + + return input_fmts; +} + +static int mtk_dp_bridge_atomic_check(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge); + struct drm_crtc *crtc = conn_state->crtc; + unsigned int input_bus_format; + + input_bus_format = bridge_state->input_bus_cfg.format; + + dev_dbg(mtk_dp->dev, "input format 0x%04x, output format 0x%04x\n", + bridge_state->input_bus_cfg.format, + bridge_state->output_bus_cfg.format); + + mtk_dp->input_fmt = input_bus_format; + if (mtk_dp->input_fmt == MEDIA_BUS_FMT_YUYV8_1X16) + mtk_dp->info.format = DP_PIXELFORMAT_YUV422; + else + mtk_dp->info.format = DP_PIXELFORMAT_RGB; + + if (!crtc) { + drm_err(mtk_dp->drm_dev, + "Can't enable bridge as connector state doesn't have a crtc\n"); + return -EINVAL; + } + + mtk_dp_parse_drm_mode_timings(mtk_dp, &crtc_state->adjusted_mode); + if (!mtk_dp_parse_capabilities(mtk_dp)) { + drm_err(mtk_dp->drm_dev, + "Can't enable bridge as nothing is plugged in\n"); + return -EINVAL; + } + + return 0; +} + +static const struct drm_bridge_funcs mtk_dp_bridge_funcs = { + .atomic_check = mtk_dp_bridge_atomic_check, + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, + .atomic_get_output_bus_fmts = mtk_dp_bridge_atomic_get_output_bus_fmts, + .atomic_get_input_bus_fmts = mtk_dp_bridge_atomic_get_input_bus_fmts, + .atomic_reset = drm_atomic_helper_bridge_reset, + .attach = mtk_dp_bridge_attach, + .detach = mtk_dp_bridge_detach, + .atomic_enable = mtk_dp_bridge_atomic_enable, + .atomic_disable = mtk_dp_bridge_atomic_disable, + .mode_valid = mtk_dp_bridge_mode_valid, + .get_edid = mtk_dp_get_edid, +}; + +static int mtk_dp_probe(struct platform_device *pdev) +{ + struct mtk_dp *mtk_dp; + struct device *dev = &pdev->dev; + int ret; + int irq_num = 0; + + mtk_dp = devm_kzalloc(dev, sizeof(*mtk_dp), GFP_KERNEL); + if (!mtk_dp) + return -ENOMEM; + + mtk_dp->dev = dev; + + irq_num = platform_get_irq(pdev, 0); + if (irq_num < 0) + return dev_err_probe(dev, irq_num, "failed to request dp irq resource\n"); + + mtk_dp->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0); + if (IS_ERR(mtk_dp->next_bridge)) { + return dev_err_probe(dev, PTR_ERR(mtk_dp->next_bridge), "Failed to get bridge\n"); + } + + ret = mtk_dp_dt_parse(mtk_dp, pdev); + if (ret) + return dev_err_probe(dev, ret, "Failed to parse dt\n"); + + drm_dp_aux_init(&mtk_dp->aux); + mtk_dp->aux.name = "aux_mtk_dp"; + mtk_dp->aux.transfer = mtk_dp_aux_transfer; + + ret = devm_request_threaded_irq(dev, irq_num, mtk_dp_hpd_event, + mtk_dp_hpd_event_thread, + IRQ_TYPE_LEVEL_HIGH, dev_name(dev), + mtk_dp); + if (ret) + return dev_err_probe(dev, -EPROBE_DEFER, "failed to request mediatek dptx irq\n"); + + mutex_init(&mtk_dp->dp_lock); + + platform_set_drvdata(pdev, mtk_dp); + + mtk_dp->phy_dev = platform_device_register_data(dev, "mediatek-dp-phy", + PLATFORM_DEVID_AUTO, + &mtk_dp->regs, + sizeof(struct regmap *)); + if (IS_ERR(mtk_dp->phy_dev)) + return dev_err_probe(dev, PTR_ERR(mtk_dp->phy_dev), "Failed to create device mediatek-dp-phy\n"); + + mtk_dp_get_calibration_data(mtk_dp); + + mtk_dp->phy = devm_phy_get(&mtk_dp->phy_dev->dev, "dp"); + + if (IS_ERR(mtk_dp->phy)) { + platform_device_unregister(mtk_dp->phy_dev); + return dev_err_probe(dev, PTR_ERR(mtk_dp->phy), "Failed to get phy\n"); + } + + mtk_dp->bridge.funcs = &mtk_dp_bridge_funcs; + mtk_dp->bridge.of_node = dev->of_node; + + mtk_dp->bridge.ops = + DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_HPD; + drm_bridge_add(&mtk_dp->bridge); + mtk_dp->bridge.type = DRM_MODE_CONNECTOR_eDP; + + pm_runtime_enable(dev); + pm_runtime_get_sync(dev); + + return 0; +} + +static int mtk_dp_remove(struct platform_device *pdev) +{ + struct mtk_dp *mtk_dp = platform_get_drvdata(pdev); + + platform_device_unregister(mtk_dp->phy_dev); + mtk_dp_video_mute(mtk_dp, true); + + pm_runtime_disable(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int mtk_dp_suspend(struct device *dev) +{ + int ret; + struct mtk_dp *mtk_dp = dev_get_drvdata(dev); + + if (mtk_dp_plug_state(mtk_dp)) { + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, DP_SET_POWER_D3); + /* Ensure the sink is off before shutting down power */ + usleep_range(2000, 3000); + } + + ret = mtk_dp_power_disable(mtk_dp); + if (ret) + return ret; + + mtk_dp_hwirq_enable(mtk_dp, false); + + pm_runtime_put_sync(dev); + + return 0; +} + +static int mtk_dp_resume(struct device *dev) +{ + int ret; + struct mtk_dp *mtk_dp = dev_get_drvdata(dev); + + pm_runtime_get_sync(dev); + + mtk_dp_init_port(mtk_dp); + mtk_dp_hwirq_enable(mtk_dp, true); + ret = mtk_dp_power_enable(mtk_dp); + + return ret; +} +#endif + +static SIMPLE_DEV_PM_OPS(mtk_dp_pm_ops, mtk_dp_suspend, mtk_dp_resume); + +static const struct of_device_id mtk_dp_of_match[] = { + { .compatible = "mediatek,mt8195-edp-tx" }, + {}, +}; +MODULE_DEVICE_TABLE(of, mtk_dp_of_match); + +struct platform_driver mtk_dp_driver = { + .probe = mtk_dp_probe, + .remove = mtk_dp_remove, + .driver = { + .name = "mediatek-drm-dp", + .of_match_table = mtk_dp_of_match, + .pm = &mtk_dp_pm_ops, + }, +}; + +MODULE_AUTHOR("Jitao Shi <jitao.shi@mediatek.com>"); +MODULE_AUTHOR("Markus Schneider-Pargmann <msp@baylibre.com>"); +MODULE_DESCRIPTION("MediaTek DisplayPort Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/mediatek/mtk_dp_reg.h b/drivers/gpu/drm/mediatek/mtk_dp_reg.h new file mode 100644 index 000000000000..848e5f697737 --- /dev/null +++ b/drivers/gpu/drm/mediatek/mtk_dp_reg.h @@ -0,0 +1,570 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2019 MediaTek Inc. + * Copyright (c) 2021 BayLibre + */ +#ifndef _MTK_DP_REG_H_ +#define _MTK_DP_REG_H_ + +#define MTK_DP_SIP_CONTROL_AARCH32 \ + (BIT(0) | BIT(1) | BIT(5) | BIT(8) | BIT(10) | BIT(25) | BIT(31)) +#define MTK_DP_SIP_ATF_VIDEO_UNMUTE BIT(5) +#define MTK_DP_SIP_ATF_EDP_VIDEO_UNMUTE (BIT(0) | BIT(5)) + +#define DP_PHY_GLB_BIAS_GEN_00 0 +#define RG_XTP_GLB_BIAS_INTR_CTRL GENMASK(20, 16) + +#define DP_PHY_GLB_DPAUX_TX BIT(3) +#define RG_CKM_PT0_CKTX_IMPSEL GENMASK(23, 20) + +#define DP_PHY_LANE_TX_0 (BIT(2) | BIT(8)) +#define RG_XTP_LN0_TX_IMPSEL_PMOS GENMASK(15, 12) +#define RG_XTP_LN0_TX_IMPSEL_NMOS GENMASK(19, 16) + +#define DP_PHY_LANE_TX_1 (BIT(2) | BIT(9)) +#define RG_XTP_LN1_TX_IMPSEL_PMOS GENMASK(15, 12) +#define RG_XTP_LN1_TX_IMPSEL_NMOS GENMASK(19, 16) + +#define DP_PHY_LANE_TX_2 (BIT(2) | BIT(8) | BIT(9)) +#define RG_XTP_LN2_TX_IMPSEL_PMOS GENMASK(15, 12) +#define RG_XTP_LN2_TX_IMPSEL_NMOS GENMASK(19, 16) + +#define DP_PHY_LANE_TX_3 (BIT(2) | BIT(10)) +#define RG_XTP_LN3_TX_IMPSEL_PMOS GENMASK(15, 12) +#define RG_XTP_LN3_TX_IMPSEL_NMOS GENMASK(19, 16) + +#define TOP_OFFSET BIT(13) +#define ENC0_OFFSET GENMASK(13, 12) +#define ENC1_OFFSET (BIT(9) | BIT(12) | BIT(13)) +#define TRANS_OFFSET (BIT(10) | BIT(12) | BIT(13)) +#define AUX_OFFSET (BIT(9) | BIT(10) | BIT(12) | BIT(13)) +#define SEC_OFFSET BIT(14) + +#define MTK_DP_HPD_DISCONNECT BIT(1) +#define MTK_DP_HPD_CONNECT BIT(2) +#define MTK_DP_HPD_INTERRUPT BIT(3) + +#define MTK_DP_0034 (BIT(2) | BIT(4) | BIT(5)) +#define DA_XTP_GLB_CKDET_EN_FORCE_VAL BIT(15) +#define DA_XTP_GLB_CKDET_EN_FORCE_EN BIT(14) +#define DA_CKM_INTCKTX_EN_FORCE_VAL BIT(13) +#define DA_CKM_INTCKTX_EN_FORCE_EN BIT(12) +#define DA_CKM_CKTX0_EN_FORCE_VAL BIT(11) +#define DA_CKM_CKTX0_EN_FORCE_EN BIT(10) +#define DA_CKM_XTAL_CK_FORCE_VAL BIT(9) +#define DA_CKM_XTAL_CK_FORCE_EN BIT(8) +#define DA_CKM_BIAS_LPF_EN_FORCE_VAL BIT(7) +#define DA_CKM_BIAS_LPF_EN_FORCE_EN BIT(6) +#define DA_CKM_BIAS_EN_FORCE_VAL BIT(5) +#define DA_CKM_BIAS_EN_FORCE_EN BIT(4) +#define DA_XTP_GLB_AVD10_ON_FORCE_VAL BIT(3) +#define DA_XTP_GLB_AVD10_ON_FORCE BIT(2) +#define DA_XTP_GLB_LDO_EN_FORCE_VAL BIT(1) +#define DA_XTP_GLB_LDO_EN_FORCE_EN BIT(0) + +#define MTK_DP_1040 (BIT(6) | BIT(12)) +#define RG_DPAUX_RX_VALID_DEGLITCH_EN BIT(2) +#define RG_XTP_GLB_CKDET_EN BIT(1) +#define RG_DPAUX_RX_EN BIT(0) + +#define MTK_DP_ENC0_P0_3000 (ENC0_OFFSET + 0x00) +#define LANE_NUM_DP_ENC0_P0_MASK GENMASK(1, 0) +#define VIDEO_MUTE_SW_DP_ENC0_P0_MASK BIT(2) +#define VIDEO_MUTE_SW_DP_ENC0_P0_SHIFT BIT(1) +#define VIDEO_MUTE_SEL_DP_ENC0_P0_MASK BIT(3) +#define VIDEO_MUTE_SEL_DP_ENC0_P0_SHIFT GENMASK(1, 0) +#define ENHANCED_FRAME_EN_DP_ENC0_P0_MASK BIT(4) +#define ENHANCED_FRAME_EN_DP_ENC0_P0_SHIFT BIT(2) + +#define MTK_DP_ENC0_P0_3004 (ENC0_OFFSET + 0x04) +#define VIDEO_M_CODE_SEL_DP_ENC0_P0_MASK BIT(8) +#define VIDEO_M_CODE_SEL_DP_ENC0_P0_SHIFT BIT(3) +#define DP_TX_ENCODER_4P_RESET_SW_DP_ENC0_P0_MASK BIT(9) +#define DP_TX_ENCODER_4P_RESET_SW_DP_ENC0_P0_SHIFT (BIT(0) | BIT(3)) + +#define MTK_DP_ENC0_P0_3008 (ENC0_OFFSET + 0x08) +#define VIDEO_M_CODE_SW_0_DP_ENC0_P0_MASK GENMASK(15, 0) + +#define MTK_DP_ENC0_P0_300C (ENC0_OFFSET + 0x0C) +#define VIDEO_M_CODE_SW_1_DP_ENC0_P0_MASK GENMASK(7, 0) + +#define MTK_DP_ENC0_P0_3010 (ENC0_OFFSET + 0x10) +#define HTOTAL_SW_DP_ENC0_P0_MASK GENMASK(15, 0) + +#define MTK_DP_ENC0_P0_3014 (ENC0_OFFSET + 0x14) +#define VTOTAL_SW_DP_ENC0_P0_MASK GENMASK(15, 0) + +#define MTK_DP_ENC0_P0_3018 (ENC0_OFFSET + 0x18) +#define HSTART_SW_DP_ENC0_P0_MASK GENMASK(15, 0) + +#define MTK_DP_ENC0_P0_301C (ENC0_OFFSET + 0x1C) +#define VSTART_SW_DP_ENC0_P0_MASK GENMASK(15, 0) + +#define MTK_DP_ENC0_P0_3020 (ENC0_OFFSET + 0x20) +#define HWIDTH_SW_DP_ENC0_P0_MASK GENMASK(15, 0) + +#define MTK_DP_ENC0_P0_3024 (ENC0_OFFSET + 0x24) +#define VHEIGHT_SW_DP_ENC0_P0_MASK GENMASK(15, 0) + +#define MTK_DP_ENC0_P0_3028 (ENC0_OFFSET + 0x28) +#define HSW_SW_DP_ENC0_P0_MASK GENMASK(14, 0) +#define HSW_SW_DP_ENC0_P0_SHIFT 0 +#define HSP_SW_DP_ENC0_P0_MASK (BIT(15)) + +#define MTK_DP_ENC0_P0_302C (ENC0_OFFSET + 0x2C) +#define VSW_SW_DP_ENC0_P0_MASK GENMASK(14, 0) +#define VSW_SW_DP_ENC0_P0_SHIFT 0 +#define VSP_SW_DP_ENC0_P0_MASK (BIT(15)) + +#define MTK_DP_ENC0_P0_3030 (ENC0_OFFSET + 0x30) +#define HTOTAL_SEL_DP_ENC0_P0_SHIFT 0 +#define VTOTAL_SEL_DP_ENC0_P0_SHIFT BIT(0) +#define HSTART_SEL_DP_ENC0_P0_SHIFT BIT(1) +#define VSTART_SEL_DP_ENC0_P0_SHIFT GENMASK(1, 0) +#define HWIDTH_SEL_DP_ENC0_P0_SHIFT BIT(2) +#define VHEIGHT_SEL_DP_ENC0_P0_SHIFT (BIT(0) | BIT(2)) +#define HSP_SEL_DP_ENC0_P0_SHIFT GENMASK(2, 1) +#define HSW_SEL_DP_ENC0_P0_SHIFT GENMASK(2, 0) +#define VSP_SEL_DP_ENC0_P0_SHIFT BIT(3) +#define VSW_SEL_DP_ENC0_P0_SHIFT (BIT(0) | BIT(3)) +#define VBID_AUDIO_MUTE_FLAG_SW_DP_ENC0_P0_MASK (BIT(11)) +#define VBID_AUDIO_MUTE_SW_DP_ENC0_P0_SHIFT (BIT(0) | BIT(1) | BIT(3)) +#define VBID_AUDIO_MUTE_FLAG_SEL_DP_ENC0_P0_MASK (BIT(12)) +#define VBID_AUDIO_MUTE_SEL_DP_ENC0_P0_SHIFT GENMASK(3, 2) + +#define MTK_DP_ENC0_P0_3034 (ENC0_OFFSET + 0x34) + +#define MTK_DP_ENC0_P0_3038 (ENC0_OFFSET + 0x38) +#define VIDEO_SOURCE_SEL_DP_ENC0_P0_MASK (BIT(11)) +#define VIDEO_SOURCE_SEL_DP_ENC0_P0_SHIFT (BIT(0) | BIT(1) | BIT(3)) + +#define MTK_DP_ENC0_P0_303C (ENC0_OFFSET + 0x3C) +#define SRAM_START_READ_THRD_DP_ENC0_P0_MASK GENMASK(5, 0) +#define SRAM_START_READ_THRD_DP_ENC0_P0_SHIFT 0 +#define VIDEO_COLOR_DEPTH_DP_ENC0_P0_MASK GENMASK(10, 8) +#define VIDEO_COLOR_DEPTH_DP_ENC0_P0_SHIFT BIT(3) +#define VIDEO_COLOR_DEPTH_DP_ENC0_P0_16BIT \ + (0 << VIDEO_COLOR_DEPTH_DP_ENC0_P0_SHIFT) +#define VIDEO_COLOR_DEPTH_DP_ENC0_P0_12BIT \ + (1 << VIDEO_COLOR_DEPTH_DP_ENC0_P0_SHIFT) +#define VIDEO_COLOR_DEPTH_DP_ENC0_P0_10BIT \ + (2 << VIDEO_COLOR_DEPTH_DP_ENC0_P0_SHIFT) +#define VIDEO_COLOR_DEPTH_DP_ENC0_P0_8BIT \ + (3 << VIDEO_COLOR_DEPTH_DP_ENC0_P0_SHIFT) +#define VIDEO_COLOR_DEPTH_DP_ENC0_P0_6BIT \ + (4 << VIDEO_COLOR_DEPTH_DP_ENC0_P0_SHIFT) +#define PIXEL_ENCODE_FORMAT_DP_ENC0_P0_MASK GENMASK(14, 12) +#define PIXEL_ENCODE_FORMAT_DP_ENC0_P0_SHIFT GENMASK(3, 2) +#define PIXEL_ENCODE_FORMAT_DP_ENC0_P0_RGB \ + (0 << PIXEL_ENCODE_FORMAT_DP_ENC0_P0_SHIFT) +#define PIXEL_ENCODE_FORMAT_DP_ENC0_P0_YCBCR422 \ + (1 << PIXEL_ENCODE_FORMAT_DP_ENC0_P0_SHIFT) +#define PIXEL_ENCODE_FORMAT_DP_ENC0_P0_YCBCR420 \ + (2 << PIXEL_ENCODE_FORMAT_DP_ENC0_P0_SHIFT) +#define VIDEO_MN_GEN_EN_DP_ENC0_P0_MASK (BIT(15)) +#define VIDEO_MN_GEN_EN_DP_ENC0_P0_SHIFT GENMASK(3, 0) + +#define MTK_DP_ENC0_P0_3040 (ENC0_OFFSET + 0x40) +#define SDP_DOWN_CNT_INIT_DP_ENC0_P0_MASK GENMASK(11, 0) +#define SDP_DOWN_CNT_INIT_DP_ENC0_P0_SHIFT 0 + +#define MTK_DP_ENC0_P0_3044 (ENC0_OFFSET + 0x44) +#define VIDEO_N_CODE_0_DP_ENC0_P0_MASK GENMASK(15, 0) + +#define MTK_DP_ENC0_P0_3048 (ENC0_OFFSET + 0x48) +#define VIDEO_N_CODE_1_DP_ENC0_P0_MASK GENMASK(7, 0) + +#define MTK_DP_ENC0_P0_304C (ENC0_OFFSET + 0x4C) +#define VBID_VIDEO_MUTE_DP_ENC0_P0_MASK BIT(2) +#define SDP_VSYNC_RISING_MASK_DP_ENC0_P0_MASK BIT(8) + +#define MTK_DP_ENC0_P0_3050 (ENC0_OFFSET + 0x50) +#define VIDEO_N_CODE_MN_GEN_0_DP_ENC0_P0_MASK GENMASK(15, 0) + +#define MTK_DP_ENC0_P0_3054 (ENC0_OFFSET + 0x54) +#define VIDEO_N_CODE_MN_GEN_1_DP_ENC0_P0_MASK GENMASK(7, 0) + +#define MTK_DP_ENC0_P0_3064 (ENC0_OFFSET + 0x64) +#define HDE_NUM_LAST_DP_ENC0_P0_MASK GENMASK(15, 0) + +#define MTK_DP_ENC0_P0_3088 (ENC0_OFFSET + 0x88) +#define AU_EN_DP_ENC0_P0_MASK BIT(6) +#define AU_EN_DP_ENC0_P0_SHIFT GENMASK(2, 1) +#define AUDIO_8CH_EN_DP_ENC0_P0_MASK BIT(7) +#define AUDIO_8CH_SEL_DP_ENC0_P0_MASK BIT(8) +#define AUDIO_2CH_EN_DP_ENC0_P0_MASK (BIT(14)) +#define AUDIO_2CH_SEL_DP_ENC0_P0_MASK (BIT(15)) + +#define MTK_DP_ENC0_P0_308C (ENC0_OFFSET + 0x8C) +#define CH_STATUS_0_DP_ENC0_P0_MASK GENMASK(15, 0) + +#define MTK_DP_ENC0_P0_3090 (ENC0_OFFSET + 0x90) +#define CH_STATUS_1_DP_ENC0_P0_MASK GENMASK(15, 0) + +#define MTK_DP_ENC0_P0_3094 (ENC0_OFFSET + 0x94) +#define CH_STATUS_2_DP_ENC0_P0_MASK GENMASK(7, 0) + +#define MTK_DP_ENC0_P0_30A0 (ENC0_OFFSET + 0xA0) + +#define MTK_DP_ENC0_P0_30A4 (ENC0_OFFSET + 0xA4) +#define AU_TS_CFG_DP_ENC0_P0_MASK GENMASK(7, 0) + +#define MTK_DP_ENC0_P0_30A8 (ENC0_OFFSET + 0xA8) + +#define MTK_DP_ENC0_P0_30AC (ENC0_OFFSET + 0xAC) + +#define MTK_DP_ENC0_P0_30B0 (ENC0_OFFSET + 0xB0) + +#define MTK_DP_ENC0_P0_30B4 (ENC0_OFFSET + 0xB4) +#define ISRC_CFG_DP_ENC0_P0_MASK GENMASK(15, 8) +#define ISRC_CFG_DP_ENC0_P0_SHIFT BIT(3) + +#define MTK_DP_ENC0_P0_30B8 (ENC0_OFFSET + 0xB8) + +#define MTK_DP_ENC0_P0_30BC (ENC0_OFFSET + 0xBC) +#define ISRC_CONT_DP_ENC0_P0_MASK BIT(0) +#define ISRC_CONT_DP_ENC0_P0_SHIFT 0 +#define AUDIO_M_CODE_MULT_DIV_SEL_DP_ENC0_P0_MASK GENMASK(10, 8) +#define AUDIO_M_CODE_MULT_DIV_SEL_DP_ENC0_P0_SHIFT BIT(3) +#define AUDIO_M_CODE_MULT_DIV_SEL_DP_ENC0_P0_MUL_2 \ + (1 << AUDIO_M_CODE_MULT_DIV_SEL_DP_ENC0_P0_SHIFT) +#define AUDIO_M_CODE_MULT_DIV_SEL_DP_ENC0_P0_MUL_4 \ + (2 << AUDIO_M_CODE_MULT_DIV_SEL_DP_ENC0_P0_SHIFT) +#define AUDIO_M_CODE_MULT_DIV_SEL_DP_ENC0_P0_MUL_8 \ + (3 << AUDIO_M_CODE_MULT_DIV_SEL_DP_ENC0_P0_SHIFT) +#define AUDIO_M_CODE_MULT_DIV_SEL_DP_ENC0_P0_DIV_2 \ + (5 << AUDIO_M_CODE_MULT_DIV_SEL_DP_ENC0_P0_SHIFT) +#define AUDIO_M_CODE_MULT_DIV_SEL_DP_ENC0_P0_DIV_4 \ + (6 << AUDIO_M_CODE_MULT_DIV_SEL_DP_ENC0_P0_SHIFT) +#define AUDIO_M_CODE_MULT_DIV_SEL_DP_ENC0_P0_DIV_8 \ + (7 << AUDIO_M_CODE_MULT_DIV_SEL_DP_ENC0_P0_SHIFT) + +#define MTK_DP_ENC0_P0_30D8 (ENC0_OFFSET + 0xD8) + +#define MTK_DP_ENC0_P0_312C (ENC0_OFFSET + 0x12C) +#define ASP_HB2_DP_ENC0_P0_MASK GENMASK(7, 0) +#define ASP_HB3_DP_ENC0_P0_MASK GENMASK(15, 8) +#define ASP_HB3_DP_ENC0_P0_SHIFT BIT(3) + +#define MTK_DP_ENC0_P0_3130 (ENC0_OFFSET + 0x130) + +#define MTK_DP_ENC0_P0_3138 (ENC0_OFFSET + 0x138) + +#define MTK_DP_ENC0_P0_3154 (ENC0_OFFSET + 0x154) +#define PGEN_HTOTAL_DP_ENC0_P0_MASK GENMASK(13, 0) + +#define MTK_DP_ENC0_P0_3158 (ENC0_OFFSET + 0x158) +#define PGEN_HSYNC_RISING_DP_ENC0_P0_MASK GENMASK(13, 0) + +#define MTK_DP_ENC0_P0_315C (ENC0_OFFSET + 0x15C) +#define PGEN_HSYNC_PULSE_WIDTH_DP_ENC0_P0_MASK GENMASK(13, 0) + +#define MTK_DP_ENC0_P0_3160 (ENC0_OFFSET + 0x160) +#define PGEN_HFDE_START_DP_ENC0_P0_MASK GENMASK(13, 0) + +#define MTK_DP_ENC0_P0_3164 (ENC0_OFFSET + 0x164) +#define PGEN_HFDE_ACTIVE_WIDTH_DP_ENC0_P0_MASK GENMASK(13, 0) + +#define MTK_DP_ENC0_P0_3168 (ENC0_OFFSET + 0x168) +#define PGEN_VTOTAL_DP_ENC0_P0_MASK GENMASK(12, 0) + +#define MTK_DP_ENC0_P0_316C (ENC0_OFFSET + 0x16C) +#define PGEN_VSYNC_RISING_DP_ENC0_P0_MASK GENMASK(12, 0) + +#define MTK_DP_ENC0_P0_3170 (ENC0_OFFSET + 0x170) +#define PGEN_VSYNC_PULSE_WIDTH_DP_ENC0_P0_MASK GENMASK(12, 0) + +#define MTK_DP_ENC0_P0_3174 (ENC0_OFFSET + 0x174) +#define PGEN_VFDE_START_DP_ENC0_P0_MASK GENMASK(12, 0) + +#define MTK_DP_ENC0_P0_3178 (ENC0_OFFSET + 0x178) +#define PGEN_VFDE_ACTIVE_WIDTH_DP_ENC0_P0_MASK GENMASK(12, 0) + +#define MTK_DP_ENC0_P0_31B0 (ENC0_OFFSET + 0x1B0) +#define PGEN_PATTERN_SEL_SHIFT BIT(2) +#define PGEN_PATTERN_SEL_MASK GENMASK(6, 4) + +#define MTK_DP_ENC0_P0_31C8 (ENC0_OFFSET + 0x1C8) +#define VSC_EXT_VESA_HB0_DP_ENC0_P0_MASK GENMASK(7, 0) +#define VSC_EXT_VESA_HB1_DP_ENC0_P0_MASK GENMASK(15, 8) +#define VSC_EXT_VESA_HB1_DP_ENC0_P0_SHIFT BIT(3) + +#define MTK_DP_ENC0_P0_31CC (ENC0_OFFSET + 0x1CC) +#define VSC_EXT_VESA_HB2_DP_ENC0_P0_MASK GENMASK(7, 0) +#define VSC_EXT_VESA_HB2_DP_ENC0_P0_SHIFT 0 +#define VSC_EXT_VESA_HB3_DP_ENC0_P0_MASK GENMASK(15, 8) + +#define MTK_DP_ENC0_P0_31D0 (ENC0_OFFSET + 0x1D0) +#define VSC_EXT_CEA_HB0_DP_ENC0_P0_MASK GENMASK(7, 0) +#define VSC_EXT_CEA_HB1_DP_ENC0_P0_MASK GENMASK(15, 8) +#define VSC_EXT_CEA_HB1_DP_ENC0_P0_SHIFT BIT(3) + +#define MTK_DP_ENC0_P0_31D4 (ENC0_OFFSET + 0x1D4) +#define VSC_EXT_CEA_HB2_DP_ENC0_P0_MASK GENMASK(7, 0) +#define VSC_EXT_CEA_HB2_DP_ENC0_P0_SHIFT 0 +#define VSC_EXT_CEA_HB3_DP_ENC0_P0_MASK GENMASK(15, 8) + +#define MTK_DP_ENC0_P0_31D8 (ENC0_OFFSET + 0x1D8) +#define VSC_EXT_VESA_NUM_DP_ENC0_P0_MASK GENMASK(5, 0) +#define VSC_EXT_VESA_NUM_DP_ENC0_P0_SHIFT 0 +#define VSC_EXT_CEA_NUM_DP_ENC0_P0_MASK GENMASK(13, 8) +#define VSC_EXT_CEA_NUM_DP_ENC0_P0_SHIFT BIT(3) + +#define MTK_DP_ENC0_P0_31DC (ENC0_OFFSET + 0x1DC) +#define HDR0_CFG_DP_ENC0_P0_MASK GENMASK(7, 0) +#define HDR0_CFG_DP_ENC0_P0_SHIFT 0 + +#define MTK_DP_ENC0_P0_31E8 (ENC0_OFFSET + 0x1E8) + +#define MTK_DP_ENC0_P0_31EC (ENC0_OFFSET + 0x1EC) +#define AUDIO_CH_SRC_SEL_DP_ENC0_P0_MASK BIT(4) +#define AUDIO_CH_SRC_SEL_DP_ENC0_P0_SHIFT BIT(2) +#define ISRC1_HB3_DP_ENC0_P0_MASK GENMASK(15, 8) +#define ISRC1_HB3_DP_ENC0_P0_SHIFT BIT(3) + +#define MTK_DP_ENC1_P0_3200 (ENC1_OFFSET + 0x00) + +#define MTK_DP_ENC1_P0_3280 (ENC1_OFFSET + 0x80) +#define SDP_PACKET_TYPE_DP_ENC1_P0_MASK GENMASK(4, 0) +#define SDP_PACKET_W_DP_ENC1_P0 BIT(5) +#define SDP_PACKET_W_DP_ENC1_P0_MASK BIT(5) +#define SDP_PACKET_W_DP_ENC1_P0_SHIFT (BIT(0) | BIT(2)) + +#define MTK_DP_ENC1_P0_328C (ENC1_OFFSET + 0x8C) + +#define MTK_DP_ENC1_P0_3290 (ENC1_OFFSET + 0x90) + +#define MTK_DP_ENC1_P0_32A0 (ENC1_OFFSET + 0xA0) + +#define MTK_DP_ENC1_P0_32A4 (ENC1_OFFSET + 0xA4) + +#define MTK_DP_ENC1_P0_3300 (ENC1_OFFSET + 0x100) +#define VIDEO_AFIFO_RDY_SEL_DP_ENC1_P0_MASK GENMASK(9, 8) +#define VIDEO_AFIFO_RDY_SEL_DP_ENC1_P0_SHIFT BIT(3) + +#define MTK_DP_ENC1_P0_3304 (ENC1_OFFSET + 0x104) +#define AU_PRTY_REGEN_DP_ENC1_P0_MASK BIT(8) +#define AU_CH_STS_REGEN_DP_ENC1_P0_MASK BIT(9) +#define AUDIO_SAMPLE_PRSENT_REGEN_DP_ENC1_P0_MASK (BIT(12)) + +#define MTK_DP_ENC1_P0_3324 (ENC1_OFFSET + 0x124) +#define AUDIO_SOURCE_MUX_DP_ENC1_P0_MASK GENMASK(9, 8) +#define AUDIO_SOURCE_MUX_DP_ENC1_P0_SHIFT BIT(3) +#define AUDIO_SOURCE_MUX_DP_ENC1_P0_DPRX \ + (0 << AUDIO_SOURCE_MUX_DP_ENC1_P0_SHIFT) + +#define MTK_DP_ENC1_P0_3364 (ENC1_OFFSET + 0x164) +#define SDP_DOWN_CNT_INIT_IN_HBLANK_DP_ENC1_P0_MASK GENMASK(11, 0) +#define SDP_DOWN_CNT_INIT_IN_HBLANK_DP_ENC1_P0_SHIFT 0 +#define FIFO_READ_START_POINT_DP_ENC1_P0_MASK GENMASK(15, 12) +#define FIFO_READ_START_POINT_DP_ENC1_P0_SHIFT GENMASK(3, 2) + +#define MTK_DP_ENC1_P0_3368 (ENC1_OFFSET + 0x168) +#define VIDEO_SRAM_FIFO_CNT_RESET_SEL_DP_ENC1_P0_SHIFT 0 +#define VIDEO_STABLE_CNT_THRD_DP_ENC1_P0_SHIFT BIT(2) +#define SDP_DP13_EN_DP_ENC1_P0_SHIFT BIT(3) +#define BS2BS_MODE_DP_ENC1_P0_MASK GENMASK(13, 12) +#define BS2BS_MODE_DP_ENC1_P0_SHIFT GENMASK(3, 2) + +#define MTK_DP_ENC1_P0_33F4 (ENC1_OFFSET + 0x1F4) + +#define MTK_DP_TRANS_P0_3400 (TRANS_OFFSET + 0) +#define PATTERN1_EN_DP_TRANS_P0_MASK BIT(12) +#define PATTERN1_EN_DP_TRANS_P0_SHIFT GENMASK(3, 2) +#define PATTERN2_EN_DP_TRANS_P0_MASK BIT(13) +#define PATTERN3_EN_DP_TRANS_P0_MASK BIT(14) +#define PATTERN4_EN_DP_TRANS_P0_MASK BIT(15) + +#define MTK_DP_TRANS_P0_3404 (TRANS_OFFSET + 0x4) +#define DP_SCR_EN_DP_TRANS_P0_MASK BIT(0) + +#define MTK_DP_TRANS_P0_340C (TRANS_OFFSET + 0xC) +#define DP_TX_TRANSMITTER_4P_RESET_SW_DP_TRANS_P0_MASK (BIT(13)) +#define DP_TX_TRANSMITTER_4P_RESET_SW_DP_TRANS_P0_SHIFT \ + (BIT(0) | BIT(2) | BIT(3)) + +#define MTK_DP_TRANS_P0_3410 (TRANS_OFFSET + 0x10) +#define HPD_DEB_THD_DP_TRANS_P0_MASK GENMASK(3, 0) +#define HPD_DEB_THD_DP_TRANS_P0_SHIFT 0 +#define HPD_INT_THD_DP_TRANS_P0_MASK GENMASK(7, 4) +#define HPD_INT_THD_DP_TRANS_P0_SHIFT BIT(2) +#define HPD_INT_THD_DP_TRANS_P0_LOWER_500US (2 << HPD_INT_THD_DP_TRANS_P0_SHIFT) +#define HPD_INT_THD_DP_TRANS_P0_UPPER_1100US \ + (2 << (HPD_INT_THD_DP_TRANS_P0_SHIFT + 2)) +#define HPD_DISC_THD_DP_TRANS_P0_MASK GENMASK(11, 8) +#define HPD_DISC_THD_DP_TRANS_P0_SHIFT BIT(3) +#define HPD_CONN_THD_DP_TRANS_P0_MASK GENMASK(15, 12) +#define HPD_CONN_THD_DP_TRANS_P0_SHIFT GENMASK(3, 2) + +#define MTK_DP_TRANS_P0_3414 (TRANS_OFFSET + 0x14) +#define HPD_DB_DP_TRANS_P0_MASK BIT(2) + +#define MTK_DP_TRANS_P0_3418 (TRANS_OFFSET + 0x18) +#define IRQ_CLR_DP_TRANS_P0_MASK GENMASK(3, 0) +#define IRQ_MASK_DP_TRANS_P0_MASK GENMASK(7, 4) +#define IRQ_MASK_DP_TRANS_P0_SHIFT BIT(2) +#define IRQ_MASK_DP_TRANS_P0_DISC_IRQ (BIT(1) << IRQ_MASK_DP_TRANS_P0_SHIFT) +#define IRQ_MASK_DP_TRANS_P0_CONN_IRQ (BIT(2) << IRQ_MASK_DP_TRANS_P0_SHIFT) +#define IRQ_MASK_DP_TRANS_P0_INT_IRQ (BIT(3) << IRQ_MASK_DP_TRANS_P0_SHIFT) +#define IRQ_STATUS_DP_TRANS_P0_MASK GENMASK(15, 12) +#define IRQ_STATUS_DP_TRANS_P0_SHIFT GENMASK(3, 2) + +#define MTK_DP_TRANS_P0_342C (TRANS_OFFSET + 0x2C) +#define XTAL_FREQ_DP_TRANS_P0_DEFAULT (BIT(0) | BIT(3) | BIT(5) | BIT(6)) +#define XTAL_FREQ_DP_TRANS_P0_MASK GENMASK(7, 0) + +#define MTK_DP_TRANS_P0_3430 (TRANS_OFFSET + 0x30) +#define HPD_INT_THD_ECO_DP_TRANS_P0_MASK GENMASK(1, 0) +#define HPD_INT_THD_ECO_DP_TRANS_P0_HIGH_BOUND_EXT BIT(1) + +#define MTK_DP_TRANS_P0_34A4 (TRANS_OFFSET + 0xA4) +#define LANE_NUM_DP_TRANS_P0_MASK GENMASK(3, 2) +#define LANE_NUM_DP_TRANS_P0_SHIFT BIT(1) + +#define MTK_DP_TRANS_P0_3540 (TRANS_OFFSET + 0x140) +#define FEC_EN_DP_TRANS_P0_MASK BIT(0) +#define FEC_EN_DP_TRANS_P0_SHIFT 0 +#define FEC_CLOCK_EN_MODE_DP_TRANS_P0_MASK BIT(3) +#define FEC_CLOCK_EN_MODE_DP_TRANS_P0_SHIFT GENMASK(1, 0) + +#define MTK_DP_TRANS_P0_3580 (TRANS_OFFSET + 0x180) +#define POST_MISC_DATA_LANE0_OV_DP_TRANS_P0_MASK BIT(8) +#define POST_MISC_DATA_LANE1_OV_DP_TRANS_P0_MASK BIT(9) +#define POST_MISC_DATA_LANE2_OV_DP_TRANS_P0_MASK (BIT(10)) +#define POST_MISC_DATA_LANE3_OV_DP_TRANS_P0_MASK (BIT(11)) + +#define MTK_DP_TRANS_P0_35C4 (TRANS_OFFSET + 0x1C4) +#define SW_IRQ_MASK_DP_TRANS_P0_MASK GENMASK(15, 0) + +#define MTK_DP_TRANS_P0_35C8 (TRANS_OFFSET + 0x1C8) +#define SW_IRQ_CLR_DP_TRANS_P0_MASK GENMASK(15, 0) + +#define SW_IRQ_STATUS_DP_TRANS_P0_MASK GENMASK(15, 0) +#define SW_IRQ_STATUS_DP_TRANS_P0_SHIFT 0 + +#define MTK_DP_TRANS_P0_35D0 (TRANS_OFFSET + 0x1D0) +#define SW_IRQ_FINAL_STATUS_DP_TRANS_P0_MASK GENMASK(15, 0) + +#define MTK_DP_TRANS_P0_35F0 (TRANS_OFFSET + 0x1F0) + +#define MTK_DP_AUX_P0_360C (AUX_OFFSET + 0xC) +#define AUX_TIMEOUT_THR_AUX_TX_P0_MASK GENMASK(12, 0) + +#define MTK_DP_AUX_P0_3614 (AUX_OFFSET + 0x14) +#define AUX_RX_UI_CNT_THR_AUX_TX_P0_MASK GENMASK(6, 0) +#define AUX_RX_UI_CNT_THR_AUX_TX_P0_SHIFT 0 + +#define MTK_DP_AUX_P0_3618 (AUX_OFFSET + 0x18) +#define AUX_RX_FIFO_FULL_AUX_TX_P0_MASK BIT(9) +#define AUX_RX_FIFO_WRITE_POINTER_AUX_TX_P0_MASK GENMASK(3, 0) + +#define MTK_DP_AUX_P0_3620 (AUX_OFFSET + 0x20) +#define AUX_RD_MODE_AUX_TX_P0_MASK BIT(9) +#define AUX_RX_FIFO_READ_PULSE_TX_P0_MASK BIT(8) +#define AUX_RX_FIFO_R_PULSE_TX_P0_SHIFT BIT(3) +#define AUX_RX_FIFO_READ_DATA_AUX_TX_P0_MASK GENMASK(7, 0) +#define AUX_RX_FIFO_READ_DATA_AUX_TX_P0_SHIFT 0 + +#define MTK_DP_AUX_P0_3624 (AUX_OFFSET + 0x24) +#define AUX_RX_REPLY_COMMAND_AUX_TX_P0_MASK GENMASK(3, 0) + +#define MTK_DP_AUX_P0_3628 (AUX_OFFSET + 0x28) +#define AUX_RX_PHY_STATE_AUX_TX_P0_MASK GENMASK(9, 0) +#define AUX_RX_PHY_STATE_AUX_TX_P0_SHIFT 0 +#define AUX_RX_PHY_STATE_AUX_TX_P0_RX_IDLE \ + (BIT(0) << AUX_RX_PHY_STATE_AUX_TX_P0_SHIFT) + +#define MTK_DP_AUX_P0_362C (AUX_OFFSET + 0x2C) +#define AUX_NO_LENGTH_AUX_TX_P0_MASK BIT(0) +#define AUX_NO_LENGTH_AUX_TX_P0_SHIFT 0 +#define AUX_TX_AUXTX_OV_EN_AUX_TX_P0_MASK BIT(1) +#define AUX_RESERVED_RW_0_AUX_TX_P0_MASK GENMASK(15, 2) + +#define MTK_DP_AUX_P0_3630 (AUX_OFFSET + 0x30) +#define AUX_TX_REQUEST_READY_AUX_TX_P0_MASK BIT(3) +#define AUX_TX_REQUEST_READY_AUX_TX_P0_SHIFT GENMASK(1, 0) + +#define MTK_DP_AUX_P0_3634 (AUX_OFFSET + 0x34) +#define AUX_TX_OVER_SAMPLE_RATE_AUX_TX_P0_MASK GENMASK(15, 8) +#define AUX_TX_OVER_SAMPLE_RATE_AUX_TX_P0_SHIFT BIT(3) + +#define MTK_DP_AUX_P0_3640 (AUX_OFFSET + 0x40) +#define AUX_RX_RECV_COMPLETE_IRQ_TX_P0_MASK BIT(6) +#define AUX_RX_AUX_RECV_COMPLETE_IRQ_AUX_TX_P0_SHIFT GENMASK(2, 1) +#define AUX_RX_EDID_RECV_COMPLETE_IRQ_AUX_TX_P0_SHIFT (BIT(0) | BIT(2)) +#define AUX_RX_MCCS_RECV_COMPLETE_IRQ_AUX_TX_P0_SHIFT BIT(2) +#define AUX_RX_CMD_RECV_IRQ_AUX_TX_P0_SHIFT GENMASK(1, 0) +#define AUX_RX_ADDR_RECV_IRQ_AUX_TX_P0_SHIFT BIT(1) +#define AUX_RX_DATA_RECV_IRQ_AUX_TX_P0_SHIFT BIT(0) +#define AUX_400US_TIMEOUT_IRQ_AUX_TX_P0_MASK BIT(0) +#define AUX_400US_TIMEOUT_IRQ_AUX_TX_P0_SHIFT 0 + +#define MTK_DP_AUX_P0_3644 (AUX_OFFSET + 0x44) +#define MCU_REQUEST_COMMAND_AUX_TX_P0_MASK GENMASK(3, 0) + +#define MTK_DP_AUX_P0_3648 (AUX_OFFSET + 0x48) +#define MCU_REQUEST_ADDRESS_LSB_AUX_TX_P0_MASK GENMASK(15, 0) + +#define MTK_DP_AUX_P0_364C (AUX_OFFSET + 0x4C) +#define MCU_REQUEST_ADDRESS_MSB_AUX_TX_P0_MASK GENMASK(3, 0) + +#define MTK_DP_AUX_P0_3650 (AUX_OFFSET + 0x50) +#define MCU_REQ_DATA_NUM_AUX_TX_P0_MASK GENMASK(15, 12) +#define MCU_REQ_DATA_NUM_AUX_TX_P0_SHIFT GENMASK(3, 2) +#define PHY_FIFO_RST_AUX_TX_P0_MASK BIT(9) +#define MCU_ACK_TRAN_COMPLETE_AUX_TX_P0_MASK BIT(8) +#define MCU_ACK_TRAN_COMPLETE_AUX_TX_P0_SHIFT BIT(3) + +#define MTK_DP_AUX_P0_3658 (AUX_OFFSET + 0x58) +#define AUX_TX_OV_EN_AUX_TX_P0_MASK BIT(0) + +#define MTK_DP_AUX_P0_3690 (AUX_OFFSET + 0x90) +#define RX_REPLY_COMPLETE_MODE_AUX_TX_P0_MASK BIT(8) +#define RX_REPLY_COMPLETE_MODE_AUX_TX_P0_SHIFT BIT(3) + +#define MTK_DP_AUX_P0_3704 (AUX_OFFSET + 0x104) +#define AUX_TX_FIFO_WRITE_DATA_NEW_MODE_TOGGLE_AUX_TX_P0_MASK BIT(1) +#define AUX_TX_FIFO_NEW_MODE_EN_AUX_TX_P0_MASK BIT(2) +#define AUX_TX_FIFO_NEW_MODE_EN_AUX_TX_P0_SHIFT BIT(1) + +#define MTK_DP_AUX_P0_3708 (AUX_OFFSET + 0x108) + +#define MTK_DP_AUX_P0_37C8 (AUX_OFFSET + 0x1C8) +#define MTK_ATOP_EN_AUX_TX_P0_MASK BIT(0) +#define MTK_ATOP_EN_AUX_TX_P0_SHIFT 0 + +#define MTK_DP_TOP_PWR_STATE (TOP_OFFSET + 0x0) +#define DP_PWR_STATE_MASK GENMASK(1, 0) +#define DP_PWR_STATE_BANDGAP BIT(0) +#define DP_PWR_STATE_BANDGAP_TPLL BIT(1) +#define DP_PWR_STATE_BANDGAP_TPLL_LANE GENMASK(1, 0) + +#define MTK_DP_TOP_SWING_EMP (TOP_OFFSET + 0x4) +#define DP_TX0_VOLT_SWING_MASK GENMASK(1, 0) +#define DP_TX0_VOLT_SWING_SHIFT 0 +#define DP_TX0_PRE_EMPH_MASK GENMASK(3, 2) +#define DP_TX0_PRE_EMPH_SHIFT BIT(1) +#define DP_TX1_VOLT_SWING_MASK GENMASK(9, 8) +#define DP_TX1_VOLT_SWING_SHIFT BIT(3) +#define DP_TX1_PRE_EMPH_MASK GENMASK(11, 10) +#define DP_TX2_VOLT_SWING_MASK GENMASK(17, 16) +#define DP_TX2_PRE_EMPH_MASK GENMASK(19, 18) +#define DP_TX3_VOLT_SWING_MASK GENMASK(25, 24) +#define DP_TX3_PRE_EMPH_MASK GENMASK(27, 26) + +#define MTK_DP_TOP_RESET_AND_PROBE (TOP_OFFSET + 0x20) +#define SW_RST_B_SHIFT 0 +#define SW_RST_B_PHYD (BIT(4) << SW_RST_B_SHIFT) + +#define MTK_DP_TOP_IRQ_STATUS (TOP_OFFSET + 0x28) +#define RGS_IRQ_STATUS_SHIFT 0 +#define RGS_IRQ_STATUS_TRANSMITTER (BIT(1) << RGS_IRQ_STATUS_SHIFT) + +#define MTK_DP_TOP_IRQ_MASK (TOP_OFFSET + 0x2C) +#define IRQ_MASK_AUX_TOP_IRQ BIT(2) + +#define MTK_DP_TOP_MEM_PD (TOP_OFFSET + 0x38) +#define MEM_ISO_EN_SHIFT 0 +#define FUSE_SEL_SHIFT BIT(1) + +#endif /*_MTK_DP_REG_H_*/ diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c index e25ac61aac08..4e378eb34071 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c @@ -906,6 +906,9 @@ static struct platform_driver * const mtk_drm_drivers[] = { &mtk_disp_ovl_driver, &mtk_disp_rdma_driver, &mtk_dpi_driver, +#if IS_REACHABLE(CONFIG_DRM_MEDIATEK_DP) + &mtk_dp_driver, +#endif &mtk_drm_platform_driver, &mtk_dsi_driver, &mtk_ethdr_driver, diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h index 8d3ff32b5364..04de9436ea85 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h @@ -59,6 +59,9 @@ extern struct platform_driver mtk_disp_ovl_adaptor_driver; extern struct platform_driver mtk_disp_ovl_driver; extern struct platform_driver mtk_disp_rdma_driver; extern struct platform_driver mtk_dpi_driver; +#if IS_REACHABLE(CONFIG_DRM_MEDIATEK_DP) +extern struct platform_driver mtk_dp_driver; +#endif extern struct platform_driver mtk_dsi_driver; extern struct platform_driver mtk_ethdr_driver; extern struct platform_driver mtk_mdp_rdma_driver;