Message ID | 20220610032941.113690-5-boon.leong.ong@intel.com (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | pcs-xpcs, stmmac: add 1000BASE-X AN for network switch | expand |
On Fri, Jun 10, 2022 at 11:29:39AM +0800, Ong Boon Leong wrote: > If "fixed-link" DT or ACPI _DSD subnode is selected, it should take > precedence over the value of ovr_an_inband passed by MAC driver. > > Fixes: ab39385021d1 ("net: phylink: make phylink_parse_mode() support non-DT platform") > Tested-by: Emilio Riva <emilio.riva@ericsson.com> > Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> > --- > drivers/net/phy/phylink.c | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c > index 066684b8091..566852815e0 100644 > --- a/drivers/net/phy/phylink.c > +++ b/drivers/net/phy/phylink.c > @@ -609,8 +609,10 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode) > const char *managed; > > dn = fwnode_get_named_child_node(fwnode, "fixed-link"); > - if (dn || fwnode_property_present(fwnode, "fixed-link")) > + if (dn || fwnode_property_present(fwnode, "fixed-link")) { > pl->cfg_link_an_mode = MLO_AN_FIXED; > + pl->config->ovr_an_inband = false; > + } ovr_an_inband was added to support "non-DT" platforms, and the only place it's set is stmmac. I don't see why you'd want a driver to always set this member, and then have phylink clear it - the driver should be setting it correctly itself, otherwise it becomes a "maybe override AN inband if certain conditions are met" flag inside phylink.
>On Fri, Jun 10, 2022 at 11:29:39AM +0800, Ong Boon Leong wrote: >> If "fixed-link" DT or ACPI _DSD subnode is selected, it should take >> precedence over the value of ovr_an_inband passed by MAC driver. >> >> Fixes: ab39385021d1 ("net: phylink: make phylink_parse_mode() support >non-DT platform") >> Tested-by: Emilio Riva <emilio.riva@ericsson.com> >> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> >> --- >> drivers/net/phy/phylink.c | 4 +++- >> 1 file changed, 3 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c >> index 066684b8091..566852815e0 100644 >> --- a/drivers/net/phy/phylink.c >> +++ b/drivers/net/phy/phylink.c >> @@ -609,8 +609,10 @@ static int phylink_parse_mode(struct phylink *pl, >struct fwnode_handle *fwnode) >> const char *managed; >> >> dn = fwnode_get_named_child_node(fwnode, "fixed-link"); >> - if (dn || fwnode_property_present(fwnode, "fixed-link")) >> + if (dn || fwnode_property_present(fwnode, "fixed-link")) { >> pl->cfg_link_an_mode = MLO_AN_FIXED; >> + pl->config->ovr_an_inband = false; >> + } > >ovr_an_inband was added to support "non-DT" platforms, and the only >place it's set is stmmac. I don't see why you'd want a driver to always >set this member, and then have phylink clear it - the driver should be >setting it correctly itself, otherwise it becomes a "maybe override AN >inband if certain conditions are met" flag inside phylink. Good point. Will make the "ovr_an_inband" not set inside the dwmac-intel if fixed-link is used.
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 066684b8091..566852815e0 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -609,8 +609,10 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode) const char *managed; dn = fwnode_get_named_child_node(fwnode, "fixed-link"); - if (dn || fwnode_property_present(fwnode, "fixed-link")) + if (dn || fwnode_property_present(fwnode, "fixed-link")) { pl->cfg_link_an_mode = MLO_AN_FIXED; + pl->config->ovr_an_inband = false; + } fwnode_handle_put(dn); if ((fwnode_property_read_string(fwnode, "managed", &managed) == 0 &&