diff mbox series

[v4,3/4] drm/panel: atna33xc20: Take advantage of wait_hpd_asserted() in struct drm_dp_aux

Message ID 20220614145327.v4.3.I9ee239f6b95b944c8fa030f300ad222a7af9899d@changeid (mailing list archive)
State New, archived
Headers show
Series drm/dp: Introduce wait_hpd_asserted() for the DP AUX bus | expand

Commit Message

Doug Anderson June 14, 2022, 9:54 p.m. UTC
Let's add support for being able to read the HPD pin even if it's
hooked directly to the controller. This will let us take away the
waiting in the AUX transfer functions of the eDP controller drivers.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

Changes in v4:
- Reorganized logic as per Dmitry's suggestion.

Changes in v3:
- Don't check "hpd_asserted" boolean when unset.
- Handle errors from gpiod_get_value_cansleep() properly.

Changes in v2:
- Change is_hpd_asserted() to wait_hpd_asserted()

 .../gpu/drm/panel/panel-samsung-atna33xc20.c  | 51 ++++++++++++++-----
 1 file changed, 38 insertions(+), 13 deletions(-)

Comments

Dmitry Baryshkov June 15, 2022, 11:10 a.m. UTC | #1
On Wed, 15 Jun 2022 at 00:54, Douglas Anderson <dianders@chromium.org> wrote:
>
> Let's add support for being able to read the HPD pin even if it's
> hooked directly to the controller. This will let us take away the
> waiting in the AUX transfer functions of the eDP controller drivers.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
>
> Changes in v4:
> - Reorganized logic as per Dmitry's suggestion.
>
> Changes in v3:
> - Don't check "hpd_asserted" boolean when unset.
> - Handle errors from gpiod_get_value_cansleep() properly.
>
> Changes in v2:
> - Change is_hpd_asserted() to wait_hpd_asserted()
>
>  .../gpu/drm/panel/panel-samsung-atna33xc20.c  | 51 ++++++++++++++-----
>  1 file changed, 38 insertions(+), 13 deletions(-)
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/panel/panel-samsung-atna33xc20.c b/drivers/gpu/drm/panel/panel-samsung-atna33xc20.c
index 3dd10412d147..5a8b978c6415 100644
--- a/drivers/gpu/drm/panel/panel-samsung-atna33xc20.c
+++ b/drivers/gpu/drm/panel/panel-samsung-atna33xc20.c
@@ -19,6 +19,10 @@ 
 #include <drm/drm_edid.h>
 #include <drm/drm_panel.h>
 
+/* T3 VCC to HPD high is max 200 ms */
+#define HPD_MAX_MS	200
+#define HPD_MAX_US	(HPD_MAX_MS * 1000)
+
 struct atana33xc20_panel {
 	struct drm_panel base;
 	bool prepared;
@@ -30,6 +34,7 @@  struct atana33xc20_panel {
 
 	struct regulator *supply;
 	struct gpio_desc *el_on3_gpio;
+	struct drm_dp_aux *aux;
 
 	struct edid *edid;
 
@@ -79,7 +84,7 @@  static int atana33xc20_suspend(struct device *dev)
 static int atana33xc20_resume(struct device *dev)
 {
 	struct atana33xc20_panel *p = dev_get_drvdata(dev);
-	bool hpd_asserted = false;
+	int hpd_asserted;
 	int ret;
 
 	/* T12 (Power off time) is min 500 ms */
@@ -90,23 +95,41 @@  static int atana33xc20_resume(struct device *dev)
 		return ret;
 	p->powered_on_time = ktime_get();
 
-	/*
-	 * Handle HPD. Note: if HPD is hooked up to a dedicated pin on the
-	 * eDP controller then "no_hpd" will be false _and_ "hpd_gpio" will be
-	 * NULL. It's up to the controller driver to wait for HPD after
-	 * preparing the panel in that case.
-	 */
 	if (p->no_hpd) {
-		/* T3 VCC to HPD high is max 200 ms */
-		msleep(200);
-	} else if (p->hpd_gpio) {
+		msleep(HPD_MAX_MS);
+		return 0;
+	}
+
+	if (p->hpd_gpio) {
 		ret = readx_poll_timeout(gpiod_get_value_cansleep, p->hpd_gpio,
 					 hpd_asserted, hpd_asserted,
-					 1000, 200000);
-		if (!hpd_asserted)
-			dev_warn(dev, "Timeout waiting for HPD\n");
+					 1000, HPD_MAX_US);
+		if (hpd_asserted < 0)
+			ret = hpd_asserted;
+
+		if (ret)
+			dev_warn(dev, "Error waiting for HPD GPIO: %d\n", ret);
+
+		return ret;
 	}
 
+	if (p->aux->wait_hpd_asserted) {
+		ret = p->aux->wait_hpd_asserted(p->aux, HPD_MAX_US);
+
+		if (ret)
+			dev_warn(dev, "Controller error waiting for HPD: %d\n", ret);
+
+		return ret;
+	}
+
+	/*
+	 * Note that it's possible that no_hpd is false, hpd_gpio is
+	 * NULL, and wait_hpd_asserted is NULL. This is because
+	 * wait_hpd_asserted() is optional even if HPD is hooked up to
+	 * a dedicated pin on the eDP controller. In this case we just
+	 * assume that the controller driver will wait for HPD at the
+	 * right times.
+	 */
 	return 0;
 }
 
@@ -263,6 +286,8 @@  static int atana33xc20_probe(struct dp_aux_ep_device *aux_ep)
 		return -ENOMEM;
 	dev_set_drvdata(dev, panel);
 
+	panel->aux = aux_ep->aux;
+
 	panel->supply = devm_regulator_get(dev, "power");
 	if (IS_ERR(panel->supply))
 		return dev_err_probe(dev, PTR_ERR(panel->supply),