Message ID | 20220609083101.24195-4-tinghan.shen@mediatek.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Add MT8186 ADSP dt-binding | expand |
On 09/06/2022 01:31, Tinghan Shen wrote: > This patch adds mt8186 dsp document. The dsp is used for Sound Open > Firmware driver node. It includes registers, clocks, memory regions, > and mailbox for dsp. > > Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> > --- > .../bindings/dsp/mediatek,mt8186-dsp.yaml | 91 +++++++++++++++++++ > 1 file changed, 91 insertions(+) > create mode 100644 Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml > > diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml > new file mode 100644 > index 000000000000..33c78f89d296 > --- /dev/null > +++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml > @@ -0,0 +1,91 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/dsp/mediatek,mt8186-dsp.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek mt8186 DSP core > + > +maintainers: > + - Tinghan Shen <tinghan.shen@mediatek.com> > + > +description: | > + MediaTek mt8186 SoC contains a DSP core used for > + advanced pre- and post- audio processing. > + > +properties: > + compatible: > + const: mediatek,mt8186-dsp > + > + reg: > + items: > + - description: Address and size of the DSP config registers > + - description: Address and size of the DSP SRAM > + - description: Address and size of the DSP secure registers > + - description: Address and size of the DSP bus registers > + > + reg-names: > + items: > + - const: cfg > + - const: sram > + - const: sec > + - const: bus > + > + clocks: > + items: > + - description: mux for audio dsp clock > + - description: mux for audio dsp local bus > + > + clock-names: > + items: > + - const: audiodsp > + - const: adsp_bus > + > + power-domains: > + maxItems: 1 > + > + mboxes: > + items: > + - description: ipc reply between host and audio DSP. > + - description: ipc request between host and audio DSP. "IPC request between" does not specify who sends the request. Host or DSP? See existing bindings for some better examples, e.g.: Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.yaml which clearly states who receives from who. > + > + mbox-names: > + items: > + - const: rep > + - const: req tx/rx Best regards, Krzysztof
Hi Krzysztof, On Wed, 2022-06-15 at 10:32 -0700, Krzysztof Kozlowski wrote: > On 09/06/2022 01:31, Tinghan Shen wrote: > > This patch adds mt8186 dsp document. The dsp is used for Sound Open > > Firmware driver node. It includes registers, clocks, memory regions, > > and mailbox for dsp. > > > > Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> > > --- > > .../bindings/dsp/mediatek,mt8186-dsp.yaml | 91 +++++++++++++++++++ > > 1 file changed, 91 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml > > > > diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml > > b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml > > new file mode 100644 > > index 000000000000..33c78f89d296 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml > > @@ -0,0 +1,91 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: > > https://urldefense.com/v3/__http://devicetree.org/schemas/dsp/mediatek,mt8186-dsp.yaml*__;Iw!!CTRNKA9wMg0ARbw!0iJc3XTOVoKM_s-soALULRxog7f0GZLppKL0FCcIrYfh91fW2HmlpzSUZjVmoUR5PrasY2BmVGvmvv_IwZtlmOdXYw$ > > > > +$schema: > > https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!0iJc3XTOVoKM_s-soALULRxog7f0GZLppKL0FCcIrYfh91fW2HmlpzSUZjVmoUR5PrasY2BmVGvmvv_IwZujnl7wMw$ > > > > + > > +title: MediaTek mt8186 DSP core > > + > > +maintainers: > > + - Tinghan Shen <tinghan.shen@mediatek.com> > > + > > +description: | > > + MediaTek mt8186 SoC contains a DSP core used for > > + advanced pre- and post- audio processing. > > + > > +properties: > > + compatible: > > + const: mediatek,mt8186-dsp > > + > > + reg: > > + items: > > + - description: Address and size of the DSP config registers > > + - description: Address and size of the DSP SRAM > > + - description: Address and size of the DSP secure registers > > + - description: Address and size of the DSP bus registers > > + > > + reg-names: > > + items: > > + - const: cfg > > + - const: sram > > + - const: sec > > + - const: bus > > + > > + clocks: > > + items: > > + - description: mux for audio dsp clock > > + - description: mux for audio dsp local bus > > + > > + clock-names: > > + items: > > + - const: audiodsp > > + - const: adsp_bus > > + > > + power-domains: > > + maxItems: 1 > > + > > + mboxes: > > + items: > > + - description: ipc reply between host and audio DSP. > > + - description: ipc request between host and audio DSP. > > "IPC request between" does not specify who sends the request. Host or DSP? > > See existing bindings for some better examples, e.g.: > Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.yaml > which clearly states who receives from who. > > > + > > + mbox-names: > > + items: > > + - const: rep > > + - const: req > > tx/rx > > > > > Best regards, > Krzysztof OK. I'll update in the next version. Thanks, TingHan
diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml new file mode 100644 index 000000000000..33c78f89d296 --- /dev/null +++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dsp/mediatek,mt8186-dsp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek mt8186 DSP core + +maintainers: + - Tinghan Shen <tinghan.shen@mediatek.com> + +description: | + MediaTek mt8186 SoC contains a DSP core used for + advanced pre- and post- audio processing. + +properties: + compatible: + const: mediatek,mt8186-dsp + + reg: + items: + - description: Address and size of the DSP config registers + - description: Address and size of the DSP SRAM + - description: Address and size of the DSP secure registers + - description: Address and size of the DSP bus registers + + reg-names: + items: + - const: cfg + - const: sram + - const: sec + - const: bus + + clocks: + items: + - description: mux for audio dsp clock + - description: mux for audio dsp local bus + + clock-names: + items: + - const: audiodsp + - const: adsp_bus + + power-domains: + maxItems: 1 + + mboxes: + items: + - description: ipc reply between host and audio DSP. + - description: ipc request between host and audio DSP. + + mbox-names: + items: + - const: rep + - const: req + + memory-region: + items: + - description: dma buffer between host and DSP. + - description: DSP system memory. + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - power-domains + - mbox-names + - mboxes + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8186-clk.h> + dsp@10680000 { + compatible = "mediatek,mt8186-dsp"; + reg = <0x10680000 0x2000>, + <0x10800000 0x100000>, + <0x1068b000 0x100>, + <0x1068f000 0x1000>; + reg-names = "cfg", "sram", "sec", "bus"; + clocks = <&topckgen CLK_TOP_AUDIODSP>, + <&topckgen CLK_TOP_ADSP_BUS>; + clock-names = "audiodsp", + "adsp_bus"; + power-domains = <&spm 6>; + mbox-names = "rep", "req"; + mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>; + };
This patch adds mt8186 dsp document. The dsp is used for Sound Open Firmware driver node. It includes registers, clocks, memory regions, and mailbox for dsp. Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> --- .../bindings/dsp/mediatek,mt8186-dsp.yaml | 91 +++++++++++++++++++ 1 file changed, 91 insertions(+) create mode 100644 Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml