diff mbox series

[v5,3/3] clk: qcom: lpass: Add support for resets & external mclk for SC7280

Message ID 20220614153306.29339-4-quic_tdas@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Add support for audio clock gating resets for SC7280 | expand

Commit Message

Taniya Das June 14, 2022, 3:33 p.m. UTC 
The clock gating control for TX/RX/WSA core bus clocks would be required
to be reset(moved from hardware control) from audio core driver. Thus
add the support for the reset clocks.

Also add the external mclk to interface external MI2S.

Fixes: a9dd26639d05 ("clk: qcom: lpass: Add support for LPASS clock controller for SC7280").
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
---
 drivers/clk/qcom/lpassaudiocc-sc7280.c | 22 ++++++++++++++++-
 drivers/clk/qcom/lpasscorecc-sc7280.c  | 33 ++++++++++++++++++++++++++
 2 files changed, 54 insertions(+), 1 deletion(-)

--
2.17.1

Comments

Stephen Boyd June 15, 2022, 7:55 p.m. UTC | #1 
Quoting Taniya Das (2022-06-14 08:33:06)
> The clock gating control for TX/RX/WSA core bus clocks would be required
> to be reset(moved from hardware control) from audio core driver. Thus
> add the support for the reset clocks.

Why can't this driver remove the clks from hardware control when it
probes? Does something put the clks into hardware control mode at
runtime?
Taniya Das July 7, 2022, 5:57 a.m. UTC | #2 
Hi Stephen,

On 6/16/2022 1:25 AM, Stephen Boyd wrote:
> Quoting Taniya Das (2022-06-14 08:33:06)
>> The clock gating control for TX/RX/WSA core bus clocks would be required
>> to be reset(moved from hardware control) from audio core driver. Thus
>> add the support for the reset clocks.
> 
> Why can't this driver remove the clks from hardware control when it
> probes? Does something put the clks into hardware control mode at
> runtime?

Sorry for the delayed response. These bits needs to be updated at 
runtime and this is as per the design requirement. Thus we had to come 
up with reset support for the same.
diff mbox series

Patch

diff --git a/drivers/clk/qcom/lpassaudiocc-sc7280.c b/drivers/clk/qcom/lpassaudiocc-sc7280.c
index 6ab6e5a34c72..4a71f261eb6e 100644
--- a/drivers/clk/qcom/lpassaudiocc-sc7280.c
+++ b/drivers/clk/qcom/lpassaudiocc-sc7280.c
@@ -22,6 +22,7 @@ 
 #include "clk-regmap-mux.h"
 #include "common.h"
 #include "gdsc.h"
+#include "reset.h"

 enum {
 	P_BI_TCXO,
@@ -221,7 +222,7 @@  static struct clk_rcg2 lpass_aon_cc_main_rcg_clk_src = {
 		.parent_data = lpass_aon_cc_parent_data_0,
 		.num_parents = ARRAY_SIZE(lpass_aon_cc_parent_data_0),
 		.flags = CLK_OPS_PARENT_ENABLE,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };

@@ -665,6 +666,18 @@  static const struct qcom_cc_desc lpass_audio_cc_sc7280_desc = {
 	.num_clks = ARRAY_SIZE(lpass_audio_cc_sc7280_clocks),
 };

+static const struct qcom_reset_map lpass_audio_cc_sc7280_resets[] = {
+	[LPASS_AUDIO_SWR_RX_CGCR] =  { 0xa0, 1 },
+	[LPASS_AUDIO_SWR_TX_CGCR] =  { 0xa8, 1 },
+	[LPASS_AUDIO_SWR_WSA_CGCR] = { 0xb0, 1 },
+};
+
+static const struct qcom_cc_desc lpass_audio_cc_reset_sc7280_desc = {
+	.config = &lpass_audio_cc_sc7280_regmap_config,
+	.resets = lpass_audio_cc_sc7280_resets,
+	.num_resets = ARRAY_SIZE(lpass_audio_cc_sc7280_resets),
+};
+
 static const struct of_device_id lpass_audio_cc_sc7280_match_table[] = {
 	{ .compatible = "qcom,sc7280-lpassaudiocc" },
 	{ }
@@ -741,6 +754,13 @@  static int lpass_audio_cc_sc7280_probe(struct platform_device *pdev)
 		return ret;
 	}

+	ret = qcom_cc_probe_by_index(pdev, 1, &lpass_audio_cc_reset_sc7280_desc);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register LPASS AUDIO CC Resets\n");
+		pm_runtime_disable(&pdev->dev);
+		return ret;
+	}
+
 	pm_runtime_mark_last_busy(&pdev->dev);
 	pm_runtime_put_autosuspend(&pdev->dev);
 	pm_runtime_put_sync(&pdev->dev);
diff --git a/drivers/clk/qcom/lpasscorecc-sc7280.c b/drivers/clk/qcom/lpasscorecc-sc7280.c
index 1f1f1bd1b68e..6ad19b06b1ce 100644
--- a/drivers/clk/qcom/lpasscorecc-sc7280.c
+++ b/drivers/clk/qcom/lpasscorecc-sc7280.c
@@ -190,6 +190,19 @@  static struct clk_rcg2 lpass_core_cc_ext_if1_clk_src = {
 	},
 };

+static struct clk_rcg2 lpass_core_cc_ext_mclk0_clk_src = {
+	.cmd_rcgr = 0x20000,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = lpass_core_cc_parent_map_0,
+	.freq_tbl = ftbl_lpass_core_cc_ext_if0_clk_src,
+	.clkr.hw.init = &(const struct clk_init_data){
+		.name = "lpass_core_cc_ext_mclk0_clk_src",
+		.parent_data = lpass_core_cc_parent_data_0,
+		.num_parents = ARRAY_SIZE(lpass_core_cc_parent_data_0),
+		.ops = &clk_rcg2_ops,
+	},
+};

 static struct clk_branch lpass_core_cc_core_clk = {
 	.halt_reg = 0x1f000,
@@ -283,6 +296,24 @@  static struct clk_branch lpass_core_cc_lpm_mem0_core_clk = {
 	},
 };

+static struct clk_branch lpass_core_cc_ext_mclk0_clk = {
+	.halt_reg = 0x20014,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x20014,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data){
+			.name = "lpass_core_cc_ext_mclk0_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&lpass_core_cc_ext_mclk0_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct clk_branch lpass_core_cc_sysnoc_mport_core_clk = {
 	.halt_reg = 0x23000,
 	.halt_check = BRANCH_HALT_VOTED,
@@ -326,6 +357,8 @@  static struct clk_regmap *lpass_core_cc_sc7280_clocks[] = {
 	[LPASS_CORE_CC_LPM_CORE_CLK] = &lpass_core_cc_lpm_core_clk.clkr,
 	[LPASS_CORE_CC_LPM_MEM0_CORE_CLK] = &lpass_core_cc_lpm_mem0_core_clk.clkr,
 	[LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK] = &lpass_core_cc_sysnoc_mport_core_clk.clkr,
+	[LPASS_CORE_CC_EXT_MCLK0_CLK] = &lpass_core_cc_ext_mclk0_clk.clkr,
+	[LPASS_CORE_CC_EXT_MCLK0_CLK_SRC] = &lpass_core_cc_ext_mclk0_clk_src.clkr,
 };

 static struct regmap_config lpass_core_cc_sc7280_regmap_config = {