Message ID | 20220616113105.890373-1-o.rempel@pengutronix.de (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | [net-next,v1,1/1] net: phy: at803x: fix NULL pointer dereference on AR9331 PHY | expand |
On Thu, Jun 16, 2022 at 01:31:05PM +0200, Oleksij Rempel wrote: > Latest kernel will explode on the PHY interrupt config, since it depends > now on allocated priv. So, run probe to allocate priv to fix it. > > Fixes: 3265f4218878 ("net: phy: at803x: add fiber support") > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > --- > drivers/net/phy/at803x.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c > index 6a467e7817a6..b72a807f2e03 100644 > --- a/drivers/net/phy/at803x.c > +++ b/drivers/net/phy/at803x.c > @@ -2072,6 +2072,8 @@ static struct phy_driver at803x_driver[] = { > /* ATHEROS AR9331 */ > PHY_ID_MATCH_EXACT(ATH9331_PHY_ID), > .name = "Qualcomm Atheros AR9331 built-in PHY", > + .probe = at803x_probe, > + .remove = at803x_remove, > .suspend = at803x_suspend, > .resume = at803x_resume, > .flags = PHY_POLL_CABLE_TEST, Is the same change needed for some of the other PHYs? QCA8081? QCA9561? Andrew
On Thu, Jun 16, 2022 at 03:38:15PM +0200, Andrew Lunn wrote: > On Thu, Jun 16, 2022 at 01:31:05PM +0200, Oleksij Rempel wrote: > > Latest kernel will explode on the PHY interrupt config, since it depends > > now on allocated priv. So, run probe to allocate priv to fix it. > > > > Fixes: 3265f4218878 ("net: phy: at803x: add fiber support") > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > > --- > > drivers/net/phy/at803x.c | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c > > index 6a467e7817a6..b72a807f2e03 100644 > > --- a/drivers/net/phy/at803x.c > > +++ b/drivers/net/phy/at803x.c > > @@ -2072,6 +2072,8 @@ static struct phy_driver at803x_driver[] = { > > /* ATHEROS AR9331 */ > > PHY_ID_MATCH_EXACT(ATH9331_PHY_ID), > > .name = "Qualcomm Atheros AR9331 built-in PHY", > > + .probe = at803x_probe, > > + .remove = at803x_remove, > > .suspend = at803x_suspend, > > .resume = at803x_resume, > > .flags = PHY_POLL_CABLE_TEST, > > Is the same change needed for some of the other PHYs? QCA8081? > QCA9561? Yes, good point. Regards, Oleksij
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 6a467e7817a6..b72a807f2e03 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -2072,6 +2072,8 @@ static struct phy_driver at803x_driver[] = { /* ATHEROS AR9331 */ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID), .name = "Qualcomm Atheros AR9331 built-in PHY", + .probe = at803x_probe, + .remove = at803x_remove, .suspend = at803x_suspend, .resume = at803x_resume, .flags = PHY_POLL_CABLE_TEST,
Latest kernel will explode on the PHY interrupt config, since it depends now on allocated priv. So, run probe to allocate priv to fix it. ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34 ... Call Trace: [<8050e8a8>] at803x_config_intr+0x5c/0xd0 [<80504b34>] phy_request_interrupt+0xa8/0xd0 [<8050289c>] phylink_bringup_phy+0x2d8/0x3ac [<80502b68>] phylink_fwnode_phy_connect+0x118/0x130 [<8074d8ec>] dsa_slave_create+0x270/0x420 [<80743b04>] dsa_port_setup+0x12c/0x148 [<8074580c>] dsa_register_switch+0xaf0/0xcc0 [<80511344>] ar9331_sw_probe+0x370/0x388 [<8050cb78>] mdio_probe+0x44/0x70 [<804df300>] really_probe+0x200/0x424 [<804df7b4>] __driver_probe_device+0x290/0x298 [<804df810>] driver_probe_device+0x54/0xe4 [<804dfd50>] __device_attach_driver+0xe4/0x130 [<804dcb00>] bus_for_each_drv+0xb4/0xd8 [<804dfac4>] __device_attach+0x104/0x1a4 [<804ddd24>] bus_probe_device+0x48/0xc4 [<804deb44>] deferred_probe_work_func+0xf0/0x10c [<800a0ffc>] process_one_work+0x314/0x4d4 [<800a17fc>] worker_thread+0x2a4/0x354 [<800a9a54>] kthread+0x134/0x13c [<8006306c>] ret_from_kernel_thread+0x14/0x1c Fixes: 3265f4218878 ("net: phy: at803x: add fiber support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- drivers/net/phy/at803x.c | 2 ++ 1 file changed, 2 insertions(+)