@@ -18,9 +18,11 @@ properties:
compatible:
enum:
- atmel,sama5d2-flexcom
+ - microchip,lan966x-flexcom
reg:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
clocks:
maxItems: 1
@@ -47,6 +49,27 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 3]
+ microchip,flx-shrd-pins:
+ description: Specify the Flexcom shared pins to be used for flexcom
+ chip-selects.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+ items:
+ minimum: 0
+ maximum: 20
+
+ microchip,flx-cs:
+ description: Flexcom chip selects. Here, value of '0' represents "cts" line
+ of flexcom USART or "cs0" line of flexcom SPI and value of '1' represents
+ "rts" line of flexcom USART or "cs1" line of flexcom SPI.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+ items:
+ minimum: 0
+ maximum: 1
+
patternProperties:
"^serial@[0-9a-f]+$":
description: See atmel-usart.txt for details of USART bindings.
@@ -73,6 +96,31 @@ required:
- ranges
- atmel,flexcom-mode
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: microchip,lan966x-flexcom
+
+ then:
+ properties:
+ reg:
+ items:
+ - description: Flexcom base registers map
+ - description: Flexcom shared registers map
+ required:
+ - microchip,flx-shrd-pins
+ - microchip,flx-cs
+
+ else:
+ properties:
+ reg:
+ items:
+ - description: Flexcom base registers map
+ microchip,flx-shrd-pins: false
+ microchip,flx-cs: false
+
additionalProperties: false
examples:
@@ -101,4 +149,32 @@ examples:
atmel,fifo-size = <32>;
};
};
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ flx3: flexcom@e0064000 {
+ compatible = "microchip,lan966x-flexcom";
+ reg = <0xe0064000 0x100>,
+ <0xe2004180 0x8>;
+ clocks = <&flx0_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe0040000 0x800>;
+ atmel,flexcom-mode = <2>;
+ microchip,flx-shrd-pins = <9>;
+ microchip,flx-cs = <0>;
+
+ spi3: spi@400 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx3_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&nic_clk>;
+ clock-names = "spi_clk";
+ atmel,fifo-size = <32>;
+ };
+ };
...
LAN966x SoC flexcoms has two optional I/O lines. Namely, CS0 and CS1 in flexcom SPI mode. CTS and RTS in flexcom USART mode. These pins can be mapped to lan966x FLEXCOM_SHARED[0-20] pins and usage depends on functions being configured. Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> --- v4 -> v5: - Fixed indentations and dt-schema errors. - No errors seen with 'make dt_binding_check'. v3 -> v4: - Added else condition to allOf:if:then. v2 -> v3: - Add reg property of lan966x missed in v2. v1 -> v2: - Use allOf:if:then for lan966x dt properties .../bindings/mfd/atmel,flexcom.yaml | 78 ++++++++++++++++++- 1 file changed, 77 insertions(+), 1 deletion(-)