mbox series

[v3,0/5] Add PSR support for eDP

Message ID 1655808800-3996-1-git-send-email-quic_vpolimer@quicinc.com (mailing list archive)
Headers show
Series Add PSR support for eDP | expand

Message

Vinod Polimera June 21, 2022, 10:53 a.m. UTC
Changes in v2:
  - Use dp bridge to set psr entry/exit instead of dpu_enocder.
  - Don't modify whitespaces.
  - Set self refresh aware from atomic_check.
  - Set self refresh aware only if psr is supported.
  - Provide a stub for msm_dp_display_set_psr.
  - Move dp functions to bridge code.

Changes in v3:
  - Change callback names to reflect atomic interfaces.
  - Move bridge callback change to separate patch as suggested by Dmitry.
  - Remove psr function declaration from msm_drv.h.
  - Set self_refresh_aware flag only if psr is supported.
  - Modify the variable names to simpler form.
  - Define bit fields for PSR settings.
  - Add comments explaining the steps to enter/exit psr.
  - Change DRM_INFO to drm_dbg_db. 

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>

Vinod Polimera (5):
  drm/msm/dp: Add basic PSR support for eDP
  drm/bridge: use atomic enable/disable callbacks for panel bridge
    functions
  drm/bridge: add psr support during panel bridge enable & disable
    sequence
  drm/msm/disp/dpu1: use atomic enable/disable callbacks for encoder
    functions
  drm/msm/disp/dpu1: add PSR support for eDP interface in dpu driver

 drivers/gpu/drm/bridge/panel.c              | 110 ++++++++++++++++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c    |  36 +++++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |  30 ++++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     |   2 +-
 drivers/gpu/drm/msm/dp/dp_catalog.c         |  81 ++++++++++++++
 drivers/gpu/drm/msm/dp/dp_catalog.h         |   4 +
 drivers/gpu/drm/msm/dp/dp_ctrl.c            |  76 ++++++++++++-
 drivers/gpu/drm/msm/dp/dp_ctrl.h            |   3 +
 drivers/gpu/drm/msm/dp/dp_display.c         |  14 +++
 drivers/gpu/drm/msm/dp/dp_display.h         |   2 +
 drivers/gpu/drm/msm/dp/dp_drm.c             | 166 +++++++++++++++++++++++++++-
 drivers/gpu/drm/msm/dp/dp_link.c            |  36 ++++++
 drivers/gpu/drm/msm/dp/dp_panel.c           |  22 ++++
 drivers/gpu/drm/msm/dp/dp_panel.h           |   6 +
 drivers/gpu/drm/msm/dp/dp_reg.h             |  27 +++++
 15 files changed, 591 insertions(+), 24 deletions(-)

Comments

Dmitry Baryshkov June 21, 2022, 6:40 p.m. UTC | #1
Please fix your mailer. You've got the following headers, which clearly 
confuse the threading:

In-Reply-To: <y>
References: <y>

Also the y@qualcomm.com address (present in To:) rejects incoming mail.


On 21/06/2022 13:53, Vinod Polimera wrote:
> Changes in v2:
>    - Use dp bridge to set psr entry/exit instead of dpu_enocder.
>    - Don't modify whitespaces.
>    - Set self refresh aware from atomic_check.
>    - Set self refresh aware only if psr is supported.
>    - Provide a stub for msm_dp_display_set_psr.
>    - Move dp functions to bridge code.
> 
> Changes in v3:
>    - Change callback names to reflect atomic interfaces.
>    - Move bridge callback change to separate patch as suggested by Dmitry.
>    - Remove psr function declaration from msm_drv.h.
>    - Set self_refresh_aware flag only if psr is supported.
>    - Modify the variable names to simpler form.
>    - Define bit fields for PSR settings.
>    - Add comments explaining the steps to enter/exit psr.
>    - Change DRM_INFO to drm_dbg_db.
> 
> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
> Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
> Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
> 
> Vinod Polimera (5):
>    drm/msm/dp: Add basic PSR support for eDP
>    drm/bridge: use atomic enable/disable callbacks for panel bridge
>      functions
>    drm/bridge: add psr support during panel bridge enable & disable
>      sequence
>    drm/msm/disp/dpu1: use atomic enable/disable callbacks for encoder
>      functions
>    drm/msm/disp/dpu1: add PSR support for eDP interface in dpu driver
> 
>   drivers/gpu/drm/bridge/panel.c              | 110 ++++++++++++++++--
>   drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c    |  36 +++++-
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |  30 ++++-
>   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     |   2 +-
>   drivers/gpu/drm/msm/dp/dp_catalog.c         |  81 ++++++++++++++
>   drivers/gpu/drm/msm/dp/dp_catalog.h         |   4 +
>   drivers/gpu/drm/msm/dp/dp_ctrl.c            |  76 ++++++++++++-
>   drivers/gpu/drm/msm/dp/dp_ctrl.h            |   3 +
>   drivers/gpu/drm/msm/dp/dp_display.c         |  14 +++
>   drivers/gpu/drm/msm/dp/dp_display.h         |   2 +
>   drivers/gpu/drm/msm/dp/dp_drm.c             | 166 +++++++++++++++++++++++++++-
>   drivers/gpu/drm/msm/dp/dp_link.c            |  36 ++++++
>   drivers/gpu/drm/msm/dp/dp_panel.c           |  22 ++++
>   drivers/gpu/drm/msm/dp/dp_panel.h           |   6 +
>   drivers/gpu/drm/msm/dp/dp_reg.h             |  27 +++++
>   15 files changed, 591 insertions(+), 24 deletions(-)
>