| Message ID | 20220616164303.790379-4-viorel.suman@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: arm: freescale: Switch fsl,scu from txt to yaml | expand |
On 16/06/2022 18:42, Viorel Suman wrote: > From: Abel Vesa <abel.vesa@nxp.com> > > In order to replace the fsl,scu txt file from bindings/arm/freescale, > we need to split it between the right subsystems. This patch documents > separately the 'iomux/pinctrl' child node of the SCU main node. > > Signed-off-by: Abel Vesa <abel.vesa@nxp.com> > Signed-off-by: Viorel Suman <viorel.suman@nxp.com> > --- > .../bindings/pinctrl/fsl,scu-pinctrl.yaml | 47 +++++++++++++++++++ Since this is a conversion, I expect removal of existing bindings. This applies to each other patch as well. > 1 file changed, 47 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml > new file mode 100644 > index 000000000000..7a08c60da66f > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml > @@ -0,0 +1,47 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: i.MX SCU Client Device Node - Pinctrl bindings based on SCU Message Protocol > + > +maintainers: > + - Dong Aisheng <aisheng.dong@nxp.com> > + > +description: i.MX SCU Client Device Node > + Client nodes are maintained as children of the relevant IMX-SCU device node. > + This binding uses the i.MX common pinctrl binding. > + (Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt) > + > +properties: > + compatible: > + items: You have only one item, so no items. > + - enum: > + - fsl,imx8qm-iomuxc > + - fsl,imx8qxp-iomuxc > + - fsl,imx8dxl-iomuxc > + > +patternProperties: > + "grp$": > + type: object You need to describe the children and then additionalProperties:false. See other pinctrl bindings for example. > + > +required: > + - compatible > + Missing allOf referencing pinctrl. > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/pinctrl/pads-imx8qxp.h> > + > + pinctrl { > + compatible = "fsl,imx8qxp-iomuxc"; > + > + pinctrl_lpuart0: lpuart0grp { > + fsl,pins = < > + IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 > + IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020 > + >; > + }; > + }; Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml new file mode 100644 index 000000000000..7a08c60da66f --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - Pinctrl bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + This binding uses the i.MX common pinctrl binding. + (Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt) + +properties: + compatible: + items: + - enum: + - fsl,imx8qm-iomuxc + - fsl,imx8qxp-iomuxc + - fsl,imx8dxl-iomuxc + +patternProperties: + "grp$": + type: object + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/pads-imx8qxp.h> + + pinctrl { + compatible = "fsl,imx8qxp-iomuxc"; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 + IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020 + >; + }; + };