| Message ID | 1656090912-18074-2-git-send-email-quic_khsieh@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | fix primary corruption issue | expand |
Hi, On Fri, Jun 24, 2022 at 10:15 AM Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: > > With current implementation, communication between interface driver and > upper mdss encoder layer are implemented through function calls. This > increase code complexity. Since struct msm_display_info contains msm > generic display information, it can be expended to contains more useful > information, such as widebus and dcs, in future to serve as communication > channel purpose between interface driver and upper mdss encoder layer so > that existing function calls can be eliminated. > This patch more struct msm_display_info to msm_drv.h to be visible by > whole msm scope. > > Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 20 -------------------- > drivers/gpu/drm/msm/msm_drv.h | 19 +++++++++++++++++++ > 2 files changed, 19 insertions(+), 20 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h > index 781d41c..6b604c5 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h > @@ -19,26 +19,6 @@ > #define IDLE_TIMEOUT (66 - 16/2) > > /** > - * struct msm_display_info - defines display properties > - * @intf_type: DRM_MODE_ENCODER_ type > - * @capabilities: Bitmask of display flags > - * @num_of_h_tiles: Number of horizontal tiles in case of split interface > - * @h_tile_instance: Controller instance used per tile. Number of elements is > - * based on num_of_h_tiles > - * @is_te_using_watchdog_timer: Boolean to indicate watchdog TE is > - * used instead of panel TE in cmd mode panels > - * @dsc: DSC configuration data for DSC-enabled displays > - */ > -struct msm_display_info { > - int intf_type; > - uint32_t capabilities; > - uint32_t num_of_h_tiles; > - uint32_t h_tile_instance[MAX_H_TILES_PER_DISPLAY]; > - bool is_te_using_watchdog_timer; > - struct msm_display_dsc_config *dsc; So in the structure you're "moving" there's this member called "dsc". > -}; > - > -/** > * dpu_encoder_assign_crtc - Link the encoder to the crtc it's assigned to > * @encoder: encoder pointer > * @crtc: crtc pointer > diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h > index fdbaad5..f9c263b 100644 > --- a/drivers/gpu/drm/msm/msm_drv.h > +++ b/drivers/gpu/drm/msm/msm_drv.h > @@ -106,11 +106,30 @@ struct msm_drm_thread { > struct kthread_worker *worker; > }; > > +<<<<<<< HEAD The above doesn't look like valid C to me. > /* DSC config */ > struct msm_display_dsc_config { > struct drm_dsc_config *drm; > }; > > +/** > + * struct msm_display_info - defines display properties > + * @intf_type: DRM_MODE_ENCODER_ type > + * @capabilities: Bitmask of display flags > + * @num_of_h_tiles: Number of horizontal tiles in case of split interface > + * @h_tile_instance: Controller instance used per tile. Number of elements is > + * based on num_of_h_tiles > + * @is_te_using_watchdog_timer: Boolean to indicate watchdog TE is > + * used instead of panel TE in cmd mode panels > + */ > +struct msm_display_info { > + int intf_type; > + uint32_t capabilities; > + uint32_t num_of_h_tiles; > + uint32_t h_tile_instance[MAX_H_TILES_PER_DISPLAY]; > + bool is_te_using_watchdog_timer; ...but then when you "move" the structure to its new location, which should be a noop, then <poof> the "dsc" variable vanishes (along with the kernel doc description of it before the structure). -Doug
On 6/24/2022 2:40 PM, Doug Anderson wrote: > Hi, > > On Fri, Jun 24, 2022 at 10:15 AM Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: >> With current implementation, communication between interface driver and >> upper mdss encoder layer are implemented through function calls. This >> increase code complexity. Since struct msm_display_info contains msm >> generic display information, it can be expended to contains more useful >> information, such as widebus and dcs, in future to serve as communication >> channel purpose between interface driver and upper mdss encoder layer so >> that existing function calls can be eliminated. >> This patch more struct msm_display_info to msm_drv.h to be visible by >> whole msm scope. >> >> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> >> --- >> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 20 -------------------- >> drivers/gpu/drm/msm/msm_drv.h | 19 +++++++++++++++++++ >> 2 files changed, 19 insertions(+), 20 deletions(-) >> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h >> index 781d41c..6b604c5 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h >> @@ -19,26 +19,6 @@ >> #define IDLE_TIMEOUT (66 - 16/2) >> >> /** >> - * struct msm_display_info - defines display properties >> - * @intf_type: DRM_MODE_ENCODER_ type >> - * @capabilities: Bitmask of display flags >> - * @num_of_h_tiles: Number of horizontal tiles in case of split interface >> - * @h_tile_instance: Controller instance used per tile. Number of elements is >> - * based on num_of_h_tiles >> - * @is_te_using_watchdog_timer: Boolean to indicate watchdog TE is >> - * used instead of panel TE in cmd mode panels >> - * @dsc: DSC configuration data for DSC-enabled displays >> - */ >> -struct msm_display_info { >> - int intf_type; >> - uint32_t capabilities; >> - uint32_t num_of_h_tiles; >> - uint32_t h_tile_instance[MAX_H_TILES_PER_DISPLAY]; >> - bool is_te_using_watchdog_timer; >> - struct msm_display_dsc_config *dsc; > So in the structure you're "moving" there's this member called "dsc". > > >> -}; >> - >> -/** >> * dpu_encoder_assign_crtc - Link the encoder to the crtc it's assigned to >> * @encoder: encoder pointer >> * @crtc: crtc pointer >> diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h >> index fdbaad5..f9c263b 100644 >> --- a/drivers/gpu/drm/msm/msm_drv.h >> +++ b/drivers/gpu/drm/msm/msm_drv.h >> @@ -106,11 +106,30 @@ struct msm_drm_thread { >> struct kthread_worker *worker; >> }; >> >> +<<<<<<< HEAD > The above doesn't look like valid C to me. > > >> /* DSC config */ >> struct msm_display_dsc_config { >> struct drm_dsc_config *drm; >> }; >> >> +/** >> + * struct msm_display_info - defines display properties >> + * @intf_type: DRM_MODE_ENCODER_ type >> + * @capabilities: Bitmask of display flags >> + * @num_of_h_tiles: Number of horizontal tiles in case of split interface >> + * @h_tile_instance: Controller instance used per tile. Number of elements is >> + * based on num_of_h_tiles >> + * @is_te_using_watchdog_timer: Boolean to indicate watchdog TE is >> + * used instead of panel TE in cmd mode panels >> + */ >> +struct msm_display_info { >> + int intf_type; >> + uint32_t capabilities; >> + uint32_t num_of_h_tiles; >> + uint32_t h_tile_instance[MAX_H_TILES_PER_DISPLAY]; >> + bool is_te_using_watchdog_timer; > ...but then when you "move" the structure to its new location, which > should be a noop, then <poof> the "dsc" variable vanishes (along with > the kernel doc description of it before the structure). Sorry, i did not resolve the conflicts correctly when i cherry-pick them to msm-next tree. Will fix them. > -Doug
On Fri, 24 Jun 2022 at 20:15, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: > > With current implementation, communication between interface driver and > upper mdss encoder layer are implemented through function calls. This > increase code complexity. Since struct msm_display_info contains msm > generic display information, it can be expended to contains more useful > information, such as widebus and dcs, in future to serve as communication > channel purpose between interface driver and upper mdss encoder layer so > that existing function calls can be eliminated. > This patch more struct msm_display_info to msm_drv.h to be visible by > whole msm scope. NAK. The msm_display_info contains information used by (and useful to) DPU only, it is not 'msm generic' info. For this reason it has been moved from msm_drv.h to dpu_encoder.h inIn commit b7420739f112 ("drm/msm: move struct msm_display_info to dpu driver") . Neither mdp5 nor mdp4 are going to use this structure. At some point I thought too that we might be able to create a set of data and functions to describe encoder backends (dsi, hdmi, dp). This has failed for me. After musing over the msm_drv.h part containing functions published by the backends, I could not end up with a set of them being good enough. The only common part seems to be the modeset_init, snapshot and (once DP gets the DSC interface) get_dsc_config. The rest is backend-specific. I would suggest returning to this topic if/once DSI gets wide bus support or DP starts using bonded interfaces. Before that I don't foresee that common data structure would simplify things rather than complicating them. > > Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 20 -------------------- > drivers/gpu/drm/msm/msm_drv.h | 19 +++++++++++++++++++ > 2 files changed, 19 insertions(+), 20 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h > index 781d41c..6b604c5 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h > @@ -19,26 +19,6 @@ > #define IDLE_TIMEOUT (66 - 16/2) > > /** > - * struct msm_display_info - defines display properties > - * @intf_type: DRM_MODE_ENCODER_ type > - * @capabilities: Bitmask of display flags > - * @num_of_h_tiles: Number of horizontal tiles in case of split interface > - * @h_tile_instance: Controller instance used per tile. Number of elements is > - * based on num_of_h_tiles > - * @is_te_using_watchdog_timer: Boolean to indicate watchdog TE is > - * used instead of panel TE in cmd mode panels > - * @dsc: DSC configuration data for DSC-enabled displays > - */ > -struct msm_display_info { > - int intf_type; > - uint32_t capabilities; > - uint32_t num_of_h_tiles; > - uint32_t h_tile_instance[MAX_H_TILES_PER_DISPLAY]; > - bool is_te_using_watchdog_timer; > - struct msm_display_dsc_config *dsc; > -}; > - > -/** > * dpu_encoder_assign_crtc - Link the encoder to the crtc it's assigned to > * @encoder: encoder pointer > * @crtc: crtc pointer > diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h > index fdbaad5..f9c263b 100644 > --- a/drivers/gpu/drm/msm/msm_drv.h > +++ b/drivers/gpu/drm/msm/msm_drv.h > @@ -106,11 +106,30 @@ struct msm_drm_thread { > struct kthread_worker *worker; > }; > > +<<<<<<< HEAD Not to mention that this patch is broken per se. > /* DSC config */ > struct msm_display_dsc_config { > struct drm_dsc_config *drm; > }; > > +/** > + * struct msm_display_info - defines display properties > + * @intf_type: DRM_MODE_ENCODER_ type > + * @capabilities: Bitmask of display flags > + * @num_of_h_tiles: Number of horizontal tiles in case of split interface > + * @h_tile_instance: Controller instance used per tile. Number of elements is > + * based on num_of_h_tiles > + * @is_te_using_watchdog_timer: Boolean to indicate watchdog TE is > + * used instead of panel TE in cmd mode panels > + */ > +struct msm_display_info { > + int intf_type; > + uint32_t capabilities; > + uint32_t num_of_h_tiles; > + uint32_t h_tile_instance[MAX_H_TILES_PER_DISPLAY]; > + bool is_te_using_watchdog_timer; > +}; > + > struct msm_drm_private { > > struct drm_device *dev; > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project > -- With best wishes Dmitry
On Sat, 25 Jun 2022 at 00:51, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: > On 6/24/2022 2:40 PM, Doug Anderson wrote: > > On Fri, Jun 24, 2022 at 10:15 AM Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: > >> +struct msm_display_info { > >> + int intf_type; > >> + uint32_t capabilities; > >> + uint32_t num_of_h_tiles; > >> + uint32_t h_tile_instance[MAX_H_TILES_PER_DISPLAY]; > >> + bool is_te_using_watchdog_timer; > > ...but then when you "move" the structure to its new location, which > > should be a noop, then <poof> the "dsc" variable vanishes (along with > > the kernel doc description of it before the structure). > > Sorry, i did not resolve the conflicts correctly when i cherry-pick > them to msm-next tree. > > Will fix them. I would strongly suggest doing development on top of msm/next or linux-next. Using any other tree results in lots of problems starting from the lame Fixes tags that we have been constantly seeing for the last few months, conflicts when the patch is being rebased or cherry-picked and ending up with the patches not being tested with the tree that they are being applied to.
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h index 781d41c..6b604c5 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h @@ -19,26 +19,6 @@ #define IDLE_TIMEOUT (66 - 16/2) /** - * struct msm_display_info - defines display properties - * @intf_type: DRM_MODE_ENCODER_ type - * @capabilities: Bitmask of display flags - * @num_of_h_tiles: Number of horizontal tiles in case of split interface - * @h_tile_instance: Controller instance used per tile. Number of elements is - * based on num_of_h_tiles - * @is_te_using_watchdog_timer: Boolean to indicate watchdog TE is - * used instead of panel TE in cmd mode panels - * @dsc: DSC configuration data for DSC-enabled displays - */ -struct msm_display_info { - int intf_type; - uint32_t capabilities; - uint32_t num_of_h_tiles; - uint32_t h_tile_instance[MAX_H_TILES_PER_DISPLAY]; - bool is_te_using_watchdog_timer; - struct msm_display_dsc_config *dsc; -}; - -/** * dpu_encoder_assign_crtc - Link the encoder to the crtc it's assigned to * @encoder: encoder pointer * @crtc: crtc pointer diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h index fdbaad5..f9c263b 100644 --- a/drivers/gpu/drm/msm/msm_drv.h +++ b/drivers/gpu/drm/msm/msm_drv.h @@ -106,11 +106,30 @@ struct msm_drm_thread { struct kthread_worker *worker; }; +<<<<<<< HEAD /* DSC config */ struct msm_display_dsc_config { struct drm_dsc_config *drm; }; +/** + * struct msm_display_info - defines display properties + * @intf_type: DRM_MODE_ENCODER_ type + * @capabilities: Bitmask of display flags + * @num_of_h_tiles: Number of horizontal tiles in case of split interface + * @h_tile_instance: Controller instance used per tile. Number of elements is + * based on num_of_h_tiles + * @is_te_using_watchdog_timer: Boolean to indicate watchdog TE is + * used instead of panel TE in cmd mode panels + */ +struct msm_display_info { + int intf_type; + uint32_t capabilities; + uint32_t num_of_h_tiles; + uint32_t h_tile_instance[MAX_H_TILES_PER_DISPLAY]; + bool is_te_using_watchdog_timer; +}; + struct msm_drm_private { struct drm_device *dev;
With current implementation, communication between interface driver and upper mdss encoder layer are implemented through function calls. This increase code complexity. Since struct msm_display_info contains msm generic display information, it can be expended to contains more useful information, such as widebus and dcs, in future to serve as communication channel purpose between interface driver and upper mdss encoder layer so that existing function calls can be eliminated. This patch more struct msm_display_info to msm_drv.h to be visible by whole msm scope. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 20 -------------------- drivers/gpu/drm/msm/msm_drv.h | 19 +++++++++++++++++++ 2 files changed, 19 insertions(+), 20 deletions(-)