diff mbox series

[7/7] media: dt-bindings: ov5693: document YAML binding

Message ID 20220624230307.3066530-8-tommaso.merciai@amarulasolutions.com (mailing list archive)
State New, archived
Headers show
Series media: ov5693: cleanup code and add dts support | expand

Commit Message

Tommaso Merciai June 24, 2022, 11:03 p.m. UTC
This patch adds documentation of device tree in YAML schema for the
OV5693 CMOS image sensor from Omnivision

Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
---
 .../bindings/media/i2c/ovti,ov5693.yaml       | 123 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 2 files changed, 124 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml

Comments

Krzysztof Kozlowski June 25, 2022, 8:35 p.m. UTC | #1
On 25/06/2022 01:03, Tommaso Merciai wrote:
> This patch adds documentation of device tree in YAML schema for the
> OV5693 CMOS image sensor from Omnivision
> 
> Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
> ---
>  .../bindings/media/i2c/ovti,ov5693.yaml       | 123 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 124 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> new file mode 100644
> index 000000000000..1ee70af40000
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2022 Amarulasolutions
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Omnivision OV5693 CMOS Sensor
> +
> +maintainers:
> +  - Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
> +
> +allOf:
> +  - $ref: /schemas/media/video-interface-devices.yaml#

This goes after description.

> +
> +description: |
> +  The Omnivision OV5693 is a high performance, 1/4-inch, 5 megapixel, CMOS
> +  image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
> +  sub-sampled, and windowed 10-bit MIPI images in various formats via the
> +  Serial Camera Control Bus (SCCB) interface.
> +
> +  Supports images sizes: 5 Mpixel, EIS1080p, 1080p, 720p, VGA, QVGA
> +
> +  OV5693 is programmable through I2C and two-wire Serial Camera Control Bus (SCCB).
> +  The sensor output is available via CSI-2 serial data output (up to 2-lane).
> +
> +properties:
> +  compatible:
> +    const: ovti,ov5693
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    description:
> +      System input clock (aka XVCLK). From 6 to 27 MHz.
> +    maxItems: 1
> +
> +  dovdd-supply:
> +    description:
> +      Digital I/O voltage supply, 1.8V.
> +
> +  avdd-supply:
> +    description:
> +      Analog voltage supply, 2.8V.
> +
> +  dvdd-supply:
> +    description:
> +      Digital core voltage supply, 1.2V.
> +
> +  reset-gpios:
> +    description:
> +      The phandle and specifier for the GPIO that controls sensor reset.
> +      This corresponds to the hardware pin XSHUTDN which is physically
> +      active low.
> +    maxItems: 1
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/$defs/port-base
> +    additionalProperties: false
> +
> +    properties:
> +      endpoint:
> +        $ref: /schemas/media/video-interfaces.yaml#
> +        unevaluatedProperties: false
> +
> +        properties:
> +          data-lanes:
> +            minItems: 1
> +            maxItems: 2
> +
> +          # Supports max data transfer of 900 Mbps per lane
> +          link-frequencies: true

This is not needed. Provided by video-interfaces.yaml.

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - dovdd-supply
> +  - avdd-supply
> +  - dvdd-supply
> +  - port
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/px30-cru.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/pinctrl/rockchip.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        ov5693: camera@36 {
> +            compatible = "ovti,ov5693";
> +            reg = <0x36>;
> +
> +            reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
> +            pinctrl-names = "default";
> +            pinctrl-0 = <&cif_clkout_m0>;
> +
> +            clocks = <&cru SCLK_CIF_OUT>;
> +            assigned-clocks = <&cru SCLK_CIF_OUT>;
> +            assigned-clock-rates = <19200000>;
> +
> +            avdd-supply = <&vcc_1v8>;
> +            dvdd-supply = <&vcc_1v2>;
> +            dovdd-supply = <&vcc_2v8>;
> +
> +            rotation = <90>;
> +            orientation = <0>;
> +
> +            port {
> +                ucam_out: endpoint {
> +                    remote-endpoint = <&mipi_in_ucam>;
> +                    data-lanes = <1 2>;
> +                    link-frequencies = /bits/ 64 <450000000>;
> +                };
> +            };
> +        };
> +    };
> \ No newline at end of file

^^^ This has to be fixed.

> diff --git a/MAINTAINERS b/MAINTAINERS
Best regards,
Krzysztof
Tommaso Merciai June 27, 2022, 8:02 a.m. UTC | #2
Hi Krzysztof,
Thanks for your review, I will fix this in v2.

Regards,
Tommaso

On Sat, Jun 25, 2022 at 10:35:50PM +0200, Krzysztof Kozlowski wrote:
> On 25/06/2022 01:03, Tommaso Merciai wrote:
> > This patch adds documentation of device tree in YAML schema for the
> > OV5693 CMOS image sensor from Omnivision
> > 
> > Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
> > ---
> >  .../bindings/media/i2c/ovti,ov5693.yaml       | 123 ++++++++++++++++++
> >  MAINTAINERS                                   |   1 +
> >  2 files changed, 124 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> > new file mode 100644
> > index 000000000000..1ee70af40000
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> > @@ -0,0 +1,123 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +# Copyright (c) 2022 Amarulasolutions
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Omnivision OV5693 CMOS Sensor
> > +
> > +maintainers:
> > +  - Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
> > +
> > +allOf:
> > +  - $ref: /schemas/media/video-interface-devices.yaml#
> 
> This goes after description.
> 
> > +
> > +description: |
> > +  The Omnivision OV5693 is a high performance, 1/4-inch, 5 megapixel, CMOS
> > +  image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
> > +  sub-sampled, and windowed 10-bit MIPI images in various formats via the
> > +  Serial Camera Control Bus (SCCB) interface.
> > +
> > +  Supports images sizes: 5 Mpixel, EIS1080p, 1080p, 720p, VGA, QVGA
> > +
> > +  OV5693 is programmable through I2C and two-wire Serial Camera Control Bus (SCCB).
> > +  The sensor output is available via CSI-2 serial data output (up to 2-lane).
> > +
> > +properties:
> > +  compatible:
> > +    const: ovti,ov5693
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    description:
> > +      System input clock (aka XVCLK). From 6 to 27 MHz.
> > +    maxItems: 1
> > +
> > +  dovdd-supply:
> > +    description:
> > +      Digital I/O voltage supply, 1.8V.
> > +
> > +  avdd-supply:
> > +    description:
> > +      Analog voltage supply, 2.8V.
> > +
> > +  dvdd-supply:
> > +    description:
> > +      Digital core voltage supply, 1.2V.
> > +
> > +  reset-gpios:
> > +    description:
> > +      The phandle and specifier for the GPIO that controls sensor reset.
> > +      This corresponds to the hardware pin XSHUTDN which is physically
> > +      active low.
> > +    maxItems: 1
> > +
> > +  port:
> > +    $ref: /schemas/graph.yaml#/$defs/port-base
> > +    additionalProperties: false
> > +
> > +    properties:
> > +      endpoint:
> > +        $ref: /schemas/media/video-interfaces.yaml#
> > +        unevaluatedProperties: false
> > +
> > +        properties:
> > +          data-lanes:
> > +            minItems: 1
> > +            maxItems: 2
> > +
> > +          # Supports max data transfer of 900 Mbps per lane
> > +          link-frequencies: true
> 
> This is not needed. Provided by video-interfaces.yaml.
> 
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - dovdd-supply
> > +  - avdd-supply
> > +  - dvdd-supply
> > +  - port
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/px30-cru.h>
> > +    #include <dt-bindings/gpio/gpio.h>
> > +    #include <dt-bindings/pinctrl/rockchip.h>
> > +
> > +    i2c {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        ov5693: camera@36 {
> > +            compatible = "ovti,ov5693";
> > +            reg = <0x36>;
> > +
> > +            reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
> > +            pinctrl-names = "default";
> > +            pinctrl-0 = <&cif_clkout_m0>;
> > +
> > +            clocks = <&cru SCLK_CIF_OUT>;
> > +            assigned-clocks = <&cru SCLK_CIF_OUT>;
> > +            assigned-clock-rates = <19200000>;
> > +
> > +            avdd-supply = <&vcc_1v8>;
> > +            dvdd-supply = <&vcc_1v2>;
> > +            dovdd-supply = <&vcc_2v8>;
> > +
> > +            rotation = <90>;
> > +            orientation = <0>;
> > +
> > +            port {
> > +                ucam_out: endpoint {
> > +                    remote-endpoint = <&mipi_in_ucam>;
> > +                    data-lanes = <1 2>;
> > +                    link-frequencies = /bits/ 64 <450000000>;
> > +                };
> > +            };
> > +        };
> > +    };
> > \ No newline at end of file
> 
> ^^^ This has to be fixed.
> 
> > diff --git a/MAINTAINERS b/MAINTAINERS
> Best regards,
> Krzysztof
Rob Herring (Arm) June 27, 2022, 1:31 p.m. UTC | #3
On Sat, 25 Jun 2022 01:03:07 +0200, Tommaso Merciai wrote:
> This patch adds documentation of device tree in YAML schema for the
> OV5693 CMOS image sensor from Omnivision
> 
> Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
> ---
>  .../bindings/media/i2c/ovti,ov5693.yaml       | 123 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 124 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml:123:7: [error] no new line character at the end of file (new-line-at-end-of-file)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
new file mode 100644
index 000000000000..1ee70af40000
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
@@ -0,0 +1,123 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2022 Amarulasolutions
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5693 CMOS Sensor
+
+maintainers:
+  - Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+description: |
+  The Omnivision OV5693 is a high performance, 1/4-inch, 5 megapixel, CMOS
+  image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
+  sub-sampled, and windowed 10-bit MIPI images in various formats via the
+  Serial Camera Control Bus (SCCB) interface.
+
+  Supports images sizes: 5 Mpixel, EIS1080p, 1080p, 720p, VGA, QVGA
+
+  OV5693 is programmable through I2C and two-wire Serial Camera Control Bus (SCCB).
+  The sensor output is available via CSI-2 serial data output (up to 2-lane).
+
+properties:
+  compatible:
+    const: ovti,ov5693
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      System input clock (aka XVCLK). From 6 to 27 MHz.
+    maxItems: 1
+
+  dovdd-supply:
+    description:
+      Digital I/O voltage supply, 1.8V.
+
+  avdd-supply:
+    description:
+      Analog voltage supply, 2.8V.
+
+  dvdd-supply:
+    description:
+      Digital core voltage supply, 1.2V.
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+      This corresponds to the hardware pin XSHUTDN which is physically
+      active low.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+
+          # Supports max data transfer of 900 Mbps per lane
+          link-frequencies: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov5693: camera@36 {
+            compatible = "ovti,ov5693";
+            reg = <0x36>;
+
+            reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cif_clkout_m0>;
+
+            clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clock-rates = <19200000>;
+
+            avdd-supply = <&vcc_1v8>;
+            dvdd-supply = <&vcc_1v2>;
+            dovdd-supply = <&vcc_2v8>;
+
+            rotation = <90>;
+            orientation = <0>;
+
+            port {
+                ucam_out: endpoint {
+                    remote-endpoint = <&mipi_in_ucam>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <450000000>;
+                };
+            };
+        };
+    };
\ No newline at end of file
diff --git a/MAINTAINERS b/MAINTAINERS
index 1fc9ead83d2a..844307cb20c4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14719,6 +14719,7 @@  M:	Daniel Scally <djrscally@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
 F:	drivers/media/i2c/ov5693.c
 
 OMNIVISION OV5695 SENSOR DRIVER