diff mbox series

[v14,01/15] dt-bindings: mediatek,dpi: Add DP_INTF compatible

Message ID 20220624030946.14961-2-rex-bc.chen@mediatek.com (mailing list archive)
State New, archived
Headers show
Series drm/mediatek: Add MT8195 dp_intf driver | expand

Commit Message

Rex-BC Chen (陳柏辰) June 24, 2022, 3:09 a.m. UTC 
From: Markus Schneider-Pargmann <msp@baylibre.com>

DP_INTF is similar to DPI but does not have the exact same feature set
or register layouts.

DP_INTF is the sink of the display pipeline that is connected to the
DisplayPort controller and encoder unit. It takes the same clocks as
DPI.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
[Bo-Chen: Modify reviewers' comments.]
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 .../bindings/display/mediatek/mediatek,dpi.yaml       | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

Comments

CK Hu (胡俊光) June 27, 2022, 7:50 a.m. UTC | #1 
Hi, Bo-Chen:

On Fri, 2022-06-24 at 11:09 +0800, Bo-Chen Chen wrote:
> From: Markus Schneider-Pargmann <msp@baylibre.com>
> 
> DP_INTF is similar to DPI but does not have the exact same feature
> set
> or register layouts.
> 
> DP_INTF is the sink of the display pipeline that is connected to the
> DisplayPort controller and encoder unit. It takes the same clocks as
> DPI.
> 
> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> [Bo-Chen: Modify reviewers' comments.]

Except this line,

Reviewed-by: CK Hu <ck.hu@mediatek.com>

> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno@collabora.com>
> ---
>  .../bindings/display/mediatek/mediatek,dpi.yaml       | 11 ++++++---
> --
>  1 file changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git
> a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yam
> l
> b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yam
> l
> index 77ee1b923991..8e526a4b134e 100644
> ---
> a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yam
> l
> +++
> b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yam
> l
> @@ -4,16 +4,16 @@
>  $id: 
> http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
>  $schema: http://devicetree.org/meta-schemas/core.yaml#
>  
> -title: mediatek DPI Controller Device Tree Bindings
> +title: mediatek DPI and DP_INTF Controller
>  
>  maintainers:
>    - CK Hu <ck.hu@mediatek.com>
>    - Jitao shi <jitao.shi@mediatek.com>
>  
>  description: |
> -  The Mediatek DPI function block is a sink of the display subsystem
> and
> -  provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a
> parallel
> -  output bus.
> +  The Mediatek DPI and DP_INTF function blocks are a sink of the
> display
> +  subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422
> pixel data on a
> +  parallel output bus.
>  
>  properties:
>    compatible:
> @@ -24,6 +24,7 @@ properties:
>        - mediatek,mt8183-dpi
>        - mediatek,mt8186-dpi
>        - mediatek,mt8192-dpi
> +      - mediatek,mt8195-dp-intf
>  
>    reg:
>      maxItems: 1
> @@ -55,7 +56,7 @@ properties:
>      $ref: /schemas/graph.yaml#/properties/port
>      description:
>        Output port node. This port should be connected to the input
> port of an
> -      attached HDMI or LVDS encoder chip.
> +      attached HDMI, LVDS or DisplayPort encoder chip.
>  
>  required:
>    - compatible
Rex-BC Chen (陳柏辰) June 27, 2022, 9:07 a.m. UTC | #2 
On Mon, 2022-06-27 at 15:50 +0800, CK Hu wrote:
> Hi, Bo-Chen:
> 
> On Fri, 2022-06-24 at 11:09 +0800, Bo-Chen Chen wrote:
> > From: Markus Schneider-Pargmann <msp@baylibre.com>
> > 
> > DP_INTF is similar to DPI but does not have the exact same feature
> > set
> > or register layouts.
> > 
> > DP_INTF is the sink of the display pipeline that is connected to
> > the
> > DisplayPort controller and encoder unit. It takes the same clocks
> > as
> > DPI.
> > 
> > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> > [Bo-Chen: Modify reviewers' comments.]
> 
> Except this line,
> 
> Reviewed-by: CK Hu <ck.hu@mediatek.com>
> 

Hello CK,

What do you mean?
Do you mean I should drop this line?

BRs,
Bo-Chen
> > Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno@collabora.com>
> > ---
> >  .../bindings/display/mediatek/mediatek,dpi.yaml       | 11 ++++++-
> > --
> > --
> >  1 file changed, 6 insertions(+), 5 deletions(-)
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.y
> > am
> > l
> > b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.y
> > am
> > l
> > index 77ee1b923991..8e526a4b134e 100644
> > ---
> > a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.y
> > am
> > l
> > +++
> > b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.y
> > am
> > l
> > @@ -4,16 +4,16 @@
> >  $id: 
> > http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
> >  $schema: http://devicetree.org/meta-schemas/core.yaml#
> >  
> > -title: mediatek DPI Controller Device Tree Bindings
> > +title: mediatek DPI and DP_INTF Controller
> >  
> >  maintainers:
> >    - CK Hu <ck.hu@mediatek.com>
> >    - Jitao shi <jitao.shi@mediatek.com>
> >  
> >  description: |
> > -  The Mediatek DPI function block is a sink of the display
> > subsystem
> > and
> > -  provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a
> > parallel
> > -  output bus.
> > +  The Mediatek DPI and DP_INTF function blocks are a sink of the
> > display
> > +  subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422
> > pixel data on a
> > +  parallel output bus.
> >  
> >  properties:
> >    compatible:
> > @@ -24,6 +24,7 @@ properties:
> >        - mediatek,mt8183-dpi
> >        - mediatek,mt8186-dpi
> >        - mediatek,mt8192-dpi
> > +      - mediatek,mt8195-dp-intf
> >  
> >    reg:
> >      maxItems: 1
> > @@ -55,7 +56,7 @@ properties:
> >      $ref: /schemas/graph.yaml#/properties/port
> >      description:
> >        Output port node. This port should be connected to the input
> > port of an
> > -      attached HDMI or LVDS encoder chip.
> > +      attached HDMI, LVDS or DisplayPort encoder chip.
> >  
> >  required:
> >    - compatible
> 
>
CK Hu (胡俊光) June 28, 2022, 2:42 a.m. UTC | #3 
On Mon, 2022-06-27 at 17:07 +0800, Rex-BC Chen wrote:
> On Mon, 2022-06-27 at 15:50 +0800, CK Hu wrote:
> > Hi, Bo-Chen:
> > 
> > On Fri, 2022-06-24 at 11:09 +0800, Bo-Chen Chen wrote:
> > > From: Markus Schneider-Pargmann <msp@baylibre.com>
> > > 
> > > DP_INTF is similar to DPI but does not have the exact same
> > > feature
> > > set
> > > or register layouts.
> > > 
> > > DP_INTF is the sink of the display pipeline that is connected to
> > > the
> > > DisplayPort controller and encoder unit. It takes the same clocks
> > > as
> > > DPI.
> > > 
> > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> > > [Bo-Chen: Modify reviewers' comments.]
> > 
> > Except this line,
> > 
> > Reviewed-by: CK Hu <ck.hu@mediatek.com>
> > 
> 
> Hello CK,
> 
> What do you mean?
> Do you mean I should drop this line?

Yes, drop this line. I think every patch is reviewed and modified, so
this line is redundant.

Regards,
CK

> 
> BRs,
> Bo-Chen
> > > Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
> > > Reviewed-by: AngeloGioacchino Del Regno <
> > > angelogioacchino.delregno@collabora.com>
> > > ---
> > >  .../bindings/display/mediatek/mediatek,dpi.yaml       | 11
> > > ++++++-
> > > --
> > > --
> > >  1 file changed, 6 insertions(+), 5 deletions(-)
> > > 
> > > diff --git
> > > a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi
> > > .y
> > > am
> > > l
> > > b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi
> > > .y
> > > am
> > > l
> > > index 77ee1b923991..8e526a4b134e 100644
> > > ---
> > > a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi
> > > .y
> > > am
> > > l
> > > +++
> > > b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi
> > > .y
> > > am
> > > l
> > > @@ -4,16 +4,16 @@
> > >  $id: 
> > > http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
> > >  $schema: http://devicetree.org/meta-schemas/core.yaml#
> > >  
> > > -title: mediatek DPI Controller Device Tree Bindings
> > > +title: mediatek DPI and DP_INTF Controller
> > >  
> > >  maintainers:
> > >    - CK Hu <ck.hu@mediatek.com>
> > >    - Jitao shi <jitao.shi@mediatek.com>
> > >  
> > >  description: |
> > > -  The Mediatek DPI function block is a sink of the display
> > > subsystem
> > > and
> > > -  provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on
> > > a
> > > parallel
> > > -  output bus.
> > > +  The Mediatek DPI and DP_INTF function blocks are a sink of the
> > > display
> > > +  subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422
> > > pixel data on a
> > > +  parallel output bus.
> > >  
> > >  properties:
> > >    compatible:
> > > @@ -24,6 +24,7 @@ properties:
> > >        - mediatek,mt8183-dpi
> > >        - mediatek,mt8186-dpi
> > >        - mediatek,mt8192-dpi
> > > +      - mediatek,mt8195-dp-intf
> > >  
> > >    reg:
> > >      maxItems: 1
> > > @@ -55,7 +56,7 @@ properties:
> > >      $ref: /schemas/graph.yaml#/properties/port
> > >      description:
> > >        Output port node. This port should be connected to the
> > > input
> > > port of an
> > > -      attached HDMI or LVDS encoder chip.
> > > +      attached HDMI, LVDS or DisplayPort encoder chip.
> > >  
> > >  required:
> > >    - compatible
> > 
> > 
> 
>
Rob Herring June 30, 2022, 10:15 p.m. UTC | #4 
On Fri, 24 Jun 2022 11:09:32 +0800, Bo-Chen Chen wrote:
> From: Markus Schneider-Pargmann <msp@baylibre.com>
> 
> DP_INTF is similar to DPI but does not have the exact same feature set
> or register layouts.
> 
> DP_INTF is the sink of the display pipeline that is connected to the
> DisplayPort controller and encoder unit. It takes the same clocks as
> DPI.
> 
> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> [Bo-Chen: Modify reviewers' comments.]
> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
>  .../bindings/display/mediatek/mediatek,dpi.yaml       | 11 ++++++-----
>  1 file changed, 6 insertions(+), 5 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index 77ee1b923991..8e526a4b134e 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -4,16 +4,16 @@ 
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: mediatek DPI Controller Device Tree Bindings
+title: mediatek DPI and DP_INTF Controller
 
 maintainers:
   - CK Hu <ck.hu@mediatek.com>
   - Jitao shi <jitao.shi@mediatek.com>
 
 description: |
-  The Mediatek DPI function block is a sink of the display subsystem and
-  provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel
-  output bus.
+  The Mediatek DPI and DP_INTF function blocks are a sink of the display
+  subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a
+  parallel output bus.
 
 properties:
   compatible:
@@ -24,6 +24,7 @@  properties:
       - mediatek,mt8183-dpi
       - mediatek,mt8186-dpi
       - mediatek,mt8192-dpi
+      - mediatek,mt8195-dp-intf
 
   reg:
     maxItems: 1
@@ -55,7 +56,7 @@  properties:
     $ref: /schemas/graph.yaml#/properties/port
     description:
       Output port node. This port should be connected to the input port of an
-      attached HDMI or LVDS encoder chip.
+      attached HDMI, LVDS or DisplayPort encoder chip.
 
 required:
   - compatible