| Message ID | 20220616073320.2203000-9-peng.fan@oss.nxp.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | interconnect: support i.MX8MP | expand |
Hi Peng, On 16.06.22 10:33, Peng Fan (OSS) wrote: > From: Peng Fan <peng.fan@nxp.com> > > Introduce imx_icc_noc_setting structure to describe a master port setting > Pass imx_icc_noc_setting as a parameter from specific driver > Set priority level, mode, ext control in imx_icc_node_set > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > --- > drivers/interconnect/imx/imx.c | 43 ++++++++++++++++++++++++++---- > drivers/interconnect/imx/imx.h | 44 ++++++++++++++++++++++++++++++- > drivers/interconnect/imx/imx8mm.c | 2 +- > drivers/interconnect/imx/imx8mn.c | 2 +- > drivers/interconnect/imx/imx8mq.c | 2 +- > 5 files changed, 84 insertions(+), 9 deletions(-) > > diff --git a/drivers/interconnect/imx/imx.c b/drivers/interconnect/imx/imx.c > index 78557fe6da2c..bd728caf2b85 100644 [..] > @@ -37,8 +40,24 @@ static int imx_icc_node_set(struct icc_node *node) > { > struct device *dev = node->provider->dev; > struct imx_icc_node *node_data = node->data; > + void __iomem *base; > + u32 prio; > u64 freq; > > + if (node_data->setting && !node_data->setting->ignore && node->peak_bw) { > + base = node_data->setting->reg + node_data->imx_provider->noc_base; > + if (node_data->setting->mode == IMX_NOC_MODE_FIXED) { > + prio = node_data->setting->prio_level; > + prio = PRIORITY_COMP_MARK | (prio << 8) | prio; > + writel(prio, base + IMX_NOC_PRIO_REG); > + writel(node_data->setting->mode, base + IMX_NOC_MODE_REG); > + writel(node_data->setting->ext_control, base + IMX_NOC_EXT_CTL_REG); > + } else { > + dev_info(dev, "mode: %d not supported\n", node_data->setting->mode); > + return -ENOTSUPP; Nit: I believe that -EOPNOTSUPP is the preferred error code. > + } > + } > + > if (!node_data->qos_dev) > return 0; > [..] > @@ -237,7 +263,8 @@ static int get_max_node_id(struct imx_icc_node_desc *nodes, int nodes_count) > } > > int imx_icc_register(struct platform_device *pdev, > - struct imx_icc_node_desc *nodes, int nodes_count) > + struct imx_icc_node_desc *nodes, int nodes_count, > + struct imx_icc_noc_setting *settings) > { > struct device *dev = &pdev->dev; > struct icc_onecell_data *data; > @@ -267,13 +294,19 @@ int imx_icc_register(struct platform_device *pdev, > provider->dev->of_node = dev->parent->of_node; > platform_set_drvdata(pdev, imx_provider); > > + if (settings) { > + imx_provider->noc_base = devm_of_iomap(dev, provider->dev->of_node, 0, NULL); > + if (!imx_provider->noc_base) devm_of_iomap() returns ERR_PTR(). So we should check it with IS_ERR(). Thanks, Georgi > + return PTR_ERR(imx_provider->noc_base); > + } > + > ret = icc_provider_add(provider); > if (ret) { > dev_err(dev, "error adding interconnect provider: %d\n", ret); > return ret; > } > > - ret = imx_icc_register_nodes(imx_provider, nodes, nodes_count); > + ret = imx_icc_register_nodes(imx_provider, nodes, nodes_count, settings); > if (ret) > goto provider_del; >
Am Donnerstag, dem 16.06.2022 um 15:33 +0800 schrieb Peng Fan (OSS): > From: Peng Fan <peng.fan@nxp.com> > > Introduce imx_icc_noc_setting structure to describe a master port setting > Pass imx_icc_noc_setting as a parameter from specific driver > Set priority level, mode, ext control in imx_icc_node_set > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > --- > drivers/interconnect/imx/imx.c | 43 ++++++++++++++++++++++++++---- > drivers/interconnect/imx/imx.h | 44 ++++++++++++++++++++++++++++++- > drivers/interconnect/imx/imx8mm.c | 2 +- > drivers/interconnect/imx/imx8mn.c | 2 +- > drivers/interconnect/imx/imx8mq.c | 2 +- > 5 files changed, 84 insertions(+), 9 deletions(-) > > diff --git a/drivers/interconnect/imx/imx.c b/drivers/interconnect/imx/imx.c > index 78557fe6da2c..bd728caf2b85 100644 > --- a/drivers/interconnect/imx/imx.c > +++ b/drivers/interconnect/imx/imx.c > @@ -10,6 +10,7 @@ > > #include <linux/device.h> > #include <linux/interconnect-provider.h> > +#include <linux/io.h> > #include <linux/module.h> > #include <linux/of.h> > #include <linux/of_platform.h> > @@ -21,8 +22,10 @@ > /* private icc_node data */ > struct imx_icc_node { > const struct imx_icc_node_desc *desc; > + const struct imx_icc_noc_setting *setting; > struct device *qos_dev; > struct dev_pm_qos_request qos_req; > + struct imx_icc_provider *imx_provider; > }; > > static int imx_icc_get_bw(struct icc_node *node, u32 *avg, u32 *peak) > @@ -37,8 +40,24 @@ static int imx_icc_node_set(struct icc_node *node) > { > struct device *dev = node->provider->dev; > struct imx_icc_node *node_data = node->data; > + void __iomem *base; > + u32 prio; > u64 freq; > > + if (node_data->setting && !node_data->setting->ignore && node->peak_bw) { > + base = node_data->setting->reg + node_data->imx_provider->noc_base; > + if (node_data->setting->mode == IMX_NOC_MODE_FIXED) { > + prio = node_data->setting->prio_level; > + prio = PRIORITY_COMP_MARK | (prio << 8) | prio; > + writel(prio, base + IMX_NOC_PRIO_REG); > + writel(node_data->setting->mode, base + IMX_NOC_MODE_REG); > + writel(node_data->setting->ext_control, base + IMX_NOC_EXT_CTL_REG); > + } else { > + dev_info(dev, "mode: %d not supported\n", node_data->setting->mode); > + return -ENOTSUPP; > + } > + } > + > if (!node_data->qos_dev) > return 0; > > @@ -135,7 +154,8 @@ static int imx_icc_node_init_qos(struct icc_provider *provider, > } > > static struct icc_node *imx_icc_node_add(struct imx_icc_provider *imx_provider, > - const struct imx_icc_node_desc *node_desc) > + const struct imx_icc_node_desc *node_desc, > + const struct imx_icc_noc_setting *setting) > { > struct icc_provider *provider = &imx_provider->provider; > struct device *dev = provider->dev; > @@ -164,6 +184,8 @@ static struct icc_node *imx_icc_node_add(struct imx_icc_provider *imx_provider, > node->name = node_desc->name; > node->data = node_data; > node_data->desc = node_desc; > + node_data->setting = setting; > + node_data->imx_provider = imx_provider; > icc_node_add(node, provider); > > if (node_desc->adj) { > @@ -187,7 +209,8 @@ static void imx_icc_unregister_nodes(struct icc_provider *provider) > > static int imx_icc_register_nodes(struct imx_icc_provider *imx_provider, > const struct imx_icc_node_desc *descs, > - int count) > + int count, > + const struct imx_icc_noc_setting *settings) > { > struct icc_provider *provider = &imx_provider->provider; > struct icc_onecell_data *provider_data = provider->data; > @@ -199,7 +222,10 @@ static int imx_icc_register_nodes(struct imx_icc_provider *imx_provider, > const struct imx_icc_node_desc *node_desc = &descs[i]; > size_t j; > > - node = imx_icc_node_add(imx_provider, node_desc); > + if (settings) > + node = imx_icc_node_add(imx_provider, node_desc, &settings[node_desc->id]); > + else > + node = imx_icc_node_add(imx_provider, node_desc, NULL); Maybe just write as node = imx_icc_node_add(imx_provider, node_desc, settings ? &settings[node_desc->id] : NULL); But I don't really care, so feel free to ignore this suggestion if you don't like it. > if (IS_ERR(node)) { > ret = dev_err_probe(provider->dev, > PTR_ERR(node), > "failed to add %s\n", > node_desc->name); > @@ -237,7 +263,8 @@ static int get_max_node_id(struct > imx_icc_node_desc *nodes, int nodes_count) > } > > int imx_icc_register(struct platform_device *pdev, > - struct imx_icc_node_desc *nodes, int > nodes_count) > + struct imx_icc_node_desc *nodes, int > nodes_count, > + struct imx_icc_noc_setting *settings) > { > struct device *dev = &pdev->dev; > struct icc_onecell_data *data; > @@ -267,13 +294,19 @@ int imx_icc_register(struct platform_device > *pdev, > provider->dev->of_node = dev->parent->of_node; > platform_set_drvdata(pdev, imx_provider); > > + if (settings) { > + imx_provider->noc_base = devm_of_iomap(dev, > provider->dev->of_node, 0, NULL); > + if (!imx_provider->noc_base) > + return PTR_ERR(imx_provider->noc_base); > + } > + > ret = icc_provider_add(provider); > if (ret) { > dev_err(dev, "error adding interconnect provider: > %d\n", ret); > return ret; > } > > - ret = imx_icc_register_nodes(imx_provider, nodes, > nodes_count); > + ret = imx_icc_register_nodes(imx_provider, nodes, > nodes_count, settings); > if (ret) > goto provider_del; > > diff --git a/drivers/interconnect/imx/imx.h > b/drivers/interconnect/imx/imx.h > index 0ad2c654c222..1da87cfe27da 100644 > --- a/drivers/interconnect/imx/imx.h > +++ b/drivers/interconnect/imx/imx.h > @@ -15,6 +15,31 @@ > > #define IMX_ICC_MAX_LINKS 4 > > +/* > + * High throughput priority level in Regulator mode > + * Read Priority in Fixed/Limiter mode > + */ > +#define PRIORITY0_SHIFT 0 > +/* > + * Low throughput priority level in Regulator mode > + * Write Priority in Fixed/Limiter mode > + */ > +#define PRIORITY1_SHIFT 8 > +#define PRIORITY_MASK 0x7 > + > +#define PRIORITY_COMP_MARK BIT(31) /* Must set */ > + > +#define IMX_NOC_MODE_FIXED 0 > +#define IMX_NOC_MODE_LIMITER 1 > +#define IMX_NOC_MODE_BYPASS 2 > +#define IMX_NOC_MODE_REGULATOR 3 > + > +#define IMX_NOC_PRIO_REG 0x8 > +#define IMX_NOC_MODE_REG 0xC > +#define IMX_NOC_BANDWIDTH_REG 0x10 > +#define IMX_NOC_SATURATION 0x14 > +#define IMX_NOC_EXT_CTL_REG 0x18 > + > struct imx_icc_provider { > void __iomem *noc_base; > struct icc_provider provider; > @@ -44,6 +69,22 @@ struct imx_icc_node_desc { > const struct imx_icc_node_adj_desc *adj; > }; > > +/* > + * struct imx_icc_noc_setting - Describe an interconnect node > setting > + * @ignore: indicate whether need apply this setting > + * @reg: register offset inside the NoC > + * @prio_level: priority level > + * @mode: functional mode > + * @ext_control: external input control > + */ > +struct imx_icc_noc_setting { > + bool ignore; I don't like this ignore member. Can we get rid of this and make the "don't touch" a special mode, like IMX_NOC_MODE_UNCONFIGURED? Other than those two nitpicks, the patch looks good. Regards, Lucas > + u32 reg; > + u32 prio_level; > + u32 mode; > + u32 ext_control; > +}; > + > #define DEFINE_BUS_INTERCONNECT(_name, _id, _adj, ...) \ > { \ > .id = _id, \ > @@ -61,7 +102,8 @@ struct imx_icc_node_desc { > > int imx_icc_register(struct platform_device *pdev, > struct imx_icc_node_desc *nodes, > - int nodes_count); > + int nodes_count, > + struct imx_icc_noc_setting *noc_settings); > int imx_icc_unregister(struct platform_device *pdev); > > #endif /* __DRIVERS_INTERCONNECT_IMX_H */ > diff --git a/drivers/interconnect/imx/imx8mm.c b/drivers/interconnect/imx/imx8mm.c > index 1083490bb391..ae797412db96 100644 > --- a/drivers/interconnect/imx/imx8mm.c > +++ b/drivers/interconnect/imx/imx8mm.c > @@ -83,7 +83,7 @@ static struct imx_icc_node_desc nodes[] = { > > static int imx8mm_icc_probe(struct platform_device *pdev) > { > - return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes)); > + return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes), NULL); > } > > static int imx8mm_icc_remove(struct platform_device *pdev) > diff --git a/drivers/interconnect/imx/imx8mn.c b/drivers/interconnect/imx/imx8mn.c > index ad97e55fd4e5..1ce94c5bdd8c 100644 > --- a/drivers/interconnect/imx/imx8mn.c > +++ b/drivers/interconnect/imx/imx8mn.c > @@ -72,7 +72,7 @@ static struct imx_icc_node_desc nodes[] = { > > static int imx8mn_icc_probe(struct platform_device *pdev) > { > - return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes)); > + return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes), NULL); > } > > static int imx8mn_icc_remove(struct platform_device *pdev) > diff --git a/drivers/interconnect/imx/imx8mq.c b/drivers/interconnect/imx/imx8mq.c > index d7768d3c6d8a..7f00a0511c6e 100644 > --- a/drivers/interconnect/imx/imx8mq.c > +++ b/drivers/interconnect/imx/imx8mq.c > @@ -82,7 +82,7 @@ static struct imx_icc_node_desc nodes[] = { > > static int imx8mq_icc_probe(struct platform_device *pdev) > { > - return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes)); > + return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes), NULL); > } > > static int imx8mq_icc_remove(struct platform_device *pdev)
> Subject: Re: [PATCH V2 8/9] interconnect: imx: configure NoC > mode/prioriry/ext_control > > Hi Peng, > > On 16.06.22 10:33, Peng Fan (OSS) wrote: > > From: Peng Fan <peng.fan@nxp.com> > > > > Introduce imx_icc_noc_setting structure to describe a master port > > setting Pass imx_icc_noc_setting as a parameter from specific driver > > Set priority level, mode, ext control in imx_icc_node_set > > > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > > --- > > drivers/interconnect/imx/imx.c | 43 ++++++++++++++++++++++++++---- > > drivers/interconnect/imx/imx.h | 44 > ++++++++++++++++++++++++++++++- > > drivers/interconnect/imx/imx8mm.c | 2 +- > > drivers/interconnect/imx/imx8mn.c | 2 +- > > drivers/interconnect/imx/imx8mq.c | 2 +- > > 5 files changed, 84 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/interconnect/imx/imx.c > > b/drivers/interconnect/imx/imx.c index 78557fe6da2c..bd728caf2b85 > > 100644 > > [..] > > > @@ -37,8 +40,24 @@ static int imx_icc_node_set(struct icc_node *node) > > { > > struct device *dev = node->provider->dev; > > struct imx_icc_node *node_data = node->data; > > + void __iomem *base; > > + u32 prio; > > u64 freq; > > > > + if (node_data->setting && !node_data->setting->ignore && node- > >peak_bw) { > > + base = node_data->setting->reg + node_data- > >imx_provider->noc_base; > > + if (node_data->setting->mode == IMX_NOC_MODE_FIXED) { > > + prio = node_data->setting->prio_level; > > + prio = PRIORITY_COMP_MARK | (prio << 8) | prio; > > + writel(prio, base + IMX_NOC_PRIO_REG); > > + writel(node_data->setting->mode, base + > IMX_NOC_MODE_REG); > > + writel(node_data->setting->ext_control, base + > IMX_NOC_EXT_CTL_REG); > > + } else { > > + dev_info(dev, "mode: %d not supported\n", > node_data->setting->mode); > > + return -ENOTSUPP; > > Nit: I believe that -EOPNOTSUPP is the preferred error code. Fix in V3. > > > + } > > + } > > + > > if (!node_data->qos_dev) > > return 0; > > > > [..] > > > @@ -237,7 +263,8 @@ static int get_max_node_id(struct > imx_icc_node_desc *nodes, int nodes_count) > > } > > > > int imx_icc_register(struct platform_device *pdev, > > - struct imx_icc_node_desc *nodes, int nodes_count) > > + struct imx_icc_node_desc *nodes, int nodes_count, > > + struct imx_icc_noc_setting *settings) > > { > > struct device *dev = &pdev->dev; > > struct icc_onecell_data *data; > > @@ -267,13 +294,19 @@ int imx_icc_register(struct platform_device > *pdev, > > provider->dev->of_node = dev->parent->of_node; > > platform_set_drvdata(pdev, imx_provider); > > > > + if (settings) { > > + imx_provider->noc_base = devm_of_iomap(dev, provider- > >dev->of_node, 0, NULL); > > + if (!imx_provider->noc_base) > > devm_of_iomap() returns ERR_PTR(). So we should check it with IS_ERR(). Oops, fix in V3. Thanks, Peng. > > Thanks, > Georgi > > > + return PTR_ERR(imx_provider->noc_base); > > + } > > + > > ret = icc_provider_add(provider); > > if (ret) { > > dev_err(dev, "error adding interconnect provider: %d\n", > ret); > > return ret; > > } > > > > - ret = imx_icc_register_nodes(imx_provider, nodes, nodes_count); > > + ret = imx_icc_register_nodes(imx_provider, nodes, nodes_count, > > +settings); > > if (ret) > > goto provider_del; > >
> Subject: Re: [PATCH V2 8/9] interconnect: imx: configure NoC > mode/prioriry/ext_control > > Am Donnerstag, dem 16.06.2022 um 15:33 +0800 schrieb Peng Fan (OSS): > > From: Peng Fan <peng.fan@nxp.com> > > > > Introduce imx_icc_noc_setting structure to describe a master port > > setting Pass imx_icc_noc_setting as a parameter from specific driver > > Set priority level, mode, ext control in imx_icc_node_set > > > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > > --- > > drivers/interconnect/imx/imx.c | 43 ++++++++++++++++++++++++++---- > > drivers/interconnect/imx/imx.h | 44 > ++++++++++++++++++++++++++++++- > > drivers/interconnect/imx/imx8mm.c | 2 +- > > drivers/interconnect/imx/imx8mn.c | 2 +- > > drivers/interconnect/imx/imx8mq.c | 2 +- > > 5 files changed, 84 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/interconnect/imx/imx.c > > b/drivers/interconnect/imx/imx.c index 78557fe6da2c..bd728caf2b85 > > 100644 > > --- a/drivers/interconnect/imx/imx.c > > +++ b/drivers/interconnect/imx/imx.c > > @@ -10,6 +10,7 @@ > > > > #include <linux/device.h> > > #include <linux/interconnect-provider.h> > > +#include <linux/io.h> > > #include <linux/module.h> > > #include <linux/of.h> > > #include <linux/of_platform.h> > > @@ -21,8 +22,10 @@ > > /* private icc_node data */ > > struct imx_icc_node { > > const struct imx_icc_node_desc *desc; > > + const struct imx_icc_noc_setting *setting; > > struct device *qos_dev; > > struct dev_pm_qos_request qos_req; > > + struct imx_icc_provider *imx_provider; > > }; > > > > static int imx_icc_get_bw(struct icc_node *node, u32 *avg, u32 *peak) > > @@ -37,8 +40,24 @@ static int imx_icc_node_set(struct icc_node *node) > > { > > struct device *dev = node->provider->dev; > > struct imx_icc_node *node_data = node->data; > > + void __iomem *base; > > + u32 prio; > > u64 freq; > > > > + if (node_data->setting && !node_data->setting->ignore && node- > >peak_bw) { > > + base = node_data->setting->reg + node_data- > >imx_provider->noc_base; > > + if (node_data->setting->mode == IMX_NOC_MODE_FIXED) { > > + prio = node_data->setting->prio_level; > > + prio = PRIORITY_COMP_MARK | (prio << 8) | prio; > > + writel(prio, base + IMX_NOC_PRIO_REG); > > + writel(node_data->setting->mode, base + > IMX_NOC_MODE_REG); > > + writel(node_data->setting->ext_control, base + > IMX_NOC_EXT_CTL_REG); > > + } else { > > + dev_info(dev, "mode: %d not supported\n", > node_data->setting->mode); > > + return -ENOTSUPP; > > + } > > + } > > + > > if (!node_data->qos_dev) > > return 0; > > > > @@ -135,7 +154,8 @@ static int imx_icc_node_init_qos(struct > > icc_provider *provider, } > > > > static struct icc_node *imx_icc_node_add(struct imx_icc_provider > *imx_provider, > > - const struct imx_icc_node_desc > *node_desc) > > + const struct imx_icc_node_desc > *node_desc, > > + const struct imx_icc_noc_setting > *setting) > > { > > struct icc_provider *provider = &imx_provider->provider; > > struct device *dev = provider->dev; > > @@ -164,6 +184,8 @@ static struct icc_node *imx_icc_node_add(struct > imx_icc_provider *imx_provider, > > node->name = node_desc->name; > > node->data = node_data; > > node_data->desc = node_desc; > > + node_data->setting = setting; > > + node_data->imx_provider = imx_provider; > > icc_node_add(node, provider); > > > > if (node_desc->adj) { > > @@ -187,7 +209,8 @@ static void imx_icc_unregister_nodes(struct > > icc_provider *provider) > > > > static int imx_icc_register_nodes(struct imx_icc_provider *imx_provider, > > const struct imx_icc_node_desc *descs, > > - int count) > > + int count, > > + const struct imx_icc_noc_setting *settings) > > { > > struct icc_provider *provider = &imx_provider->provider; > > struct icc_onecell_data *provider_data = provider->data; @@ - > 199,7 > > +222,10 @@ static int imx_icc_register_nodes(struct imx_icc_provider > *imx_provider, > > const struct imx_icc_node_desc *node_desc = &descs[i]; > > size_t j; > > > > - node = imx_icc_node_add(imx_provider, node_desc); > > + if (settings) > > + node = imx_icc_node_add(imx_provider, node_desc, > &settings[node_desc->id]); > > + else > > + node = imx_icc_node_add(imx_provider, node_desc, > NULL); > > Maybe just write as > node = imx_icc_node_add(imx_provider, node_desc, settings ? > &settings[node_desc->id] : NULL); Sure, cleaner. > > But I don't really care, so feel free to ignore this suggestion if you don't like it. > > > if (IS_ERR(node)) { > > ret = dev_err_probe(provider->dev, PTR_ERR(node), > > "failed to add %s\n", > > node_desc->name); > > @@ -237,7 +263,8 @@ static int get_max_node_id(struct > > imx_icc_node_desc *nodes, int nodes_count) } > > > > int imx_icc_register(struct platform_device *pdev, > > - struct imx_icc_node_desc *nodes, int > > nodes_count) > > + struct imx_icc_node_desc *nodes, int > > nodes_count, > > + struct imx_icc_noc_setting *settings) > > { > > struct device *dev = &pdev->dev; > > struct icc_onecell_data *data; > > @@ -267,13 +294,19 @@ int imx_icc_register(struct platform_device > > *pdev, > > provider->dev->of_node = dev->parent->of_node; > > platform_set_drvdata(pdev, imx_provider); > > > > + if (settings) { > > + imx_provider->noc_base = devm_of_iomap(dev, > > provider->dev->of_node, 0, NULL); > > + if (!imx_provider->noc_base) > > + return PTR_ERR(imx_provider->noc_base); > > + } > > + > > ret = icc_provider_add(provider); > > if (ret) { > > dev_err(dev, "error adding interconnect provider: > > %d\n", ret); > > return ret; > > } > > > > - ret = imx_icc_register_nodes(imx_provider, nodes, > > nodes_count); > > + ret = imx_icc_register_nodes(imx_provider, nodes, > > nodes_count, settings); > > if (ret) > > goto provider_del; > > > > diff --git a/drivers/interconnect/imx/imx.h > > b/drivers/interconnect/imx/imx.h index 0ad2c654c222..1da87cfe27da > > 100644 > > --- a/drivers/interconnect/imx/imx.h > > +++ b/drivers/interconnect/imx/imx.h > > @@ -15,6 +15,31 @@ > > > > #define IMX_ICC_MAX_LINKS 4 > > > > +/* > > + * High throughput priority level in Regulator mode > > + * Read Priority in Fixed/Limiter mode */ > > +#define PRIORITY0_SHIFT 0 > > +/* > > + * Low throughput priority level in Regulator mode > > + * Write Priority in Fixed/Limiter mode */ > > +#define PRIORITY1_SHIFT 8 > > +#define PRIORITY_MASK 0x7 > > + > > +#define PRIORITY_COMP_MARK BIT(31) /* Must set */ > > + > > +#define IMX_NOC_MODE_FIXED 0 > > +#define IMX_NOC_MODE_LIMITER 1 > > +#define IMX_NOC_MODE_BYPASS 2 > > +#define IMX_NOC_MODE_REGULATOR 3 > > + > > +#define IMX_NOC_PRIO_REG 0x8 > > +#define IMX_NOC_MODE_REG 0xC > > +#define IMX_NOC_BANDWIDTH_REG 0x10 > > +#define IMX_NOC_SATURATION 0x14 > > +#define IMX_NOC_EXT_CTL_REG 0x18 > > + > > struct imx_icc_provider { > > void __iomem *noc_base; > > struct icc_provider provider; > > @@ -44,6 +69,22 @@ struct imx_icc_node_desc { > > const struct imx_icc_node_adj_desc *adj; }; > > > > +/* > > + * struct imx_icc_noc_setting - Describe an interconnect node > > setting > > + * @ignore: indicate whether need apply this setting > > + * @reg: register offset inside the NoC > > + * @prio_level: priority level > > + * @mode: functional mode > > + * @ext_control: external input control */ struct > > +imx_icc_noc_setting { > > + bool ignore; > > I don't like this ignore member. Can we get rid of this and make the "don't > touch" a special mode, like IMX_NOC_MODE_UNCONFIGURED? I'll address in V3. Thanks, Peng. > > Other than those two nitpicks, the patch looks good. > > Regards, > Lucas > > > + u32 reg; > > + u32 prio_level; > > + u32 mode; > > + u32 ext_control; > > +}; > > + > > #define DEFINE_BUS_INTERCONNECT(_name, _id, _adj, ...) > \ > > { \ > > .id = _id, \ > > @@ -61,7 +102,8 @@ struct imx_icc_node_desc { > > > > int imx_icc_register(struct platform_device *pdev, > > struct imx_icc_node_desc *nodes, > > - int nodes_count); > > + int nodes_count, > > + struct imx_icc_noc_setting *noc_settings); > > int imx_icc_unregister(struct platform_device *pdev); > > > > #endif /* __DRIVERS_INTERCONNECT_IMX_H */ diff --git > > a/drivers/interconnect/imx/imx8mm.c > > b/drivers/interconnect/imx/imx8mm.c > > index 1083490bb391..ae797412db96 100644 > > --- a/drivers/interconnect/imx/imx8mm.c > > +++ b/drivers/interconnect/imx/imx8mm.c > > @@ -83,7 +83,7 @@ static struct imx_icc_node_desc nodes[] = { > > > > static int imx8mm_icc_probe(struct platform_device *pdev) { > > - return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes)); > > + return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes), NULL); > > } > > > > static int imx8mm_icc_remove(struct platform_device *pdev) diff --git > > a/drivers/interconnect/imx/imx8mn.c > > b/drivers/interconnect/imx/imx8mn.c > > index ad97e55fd4e5..1ce94c5bdd8c 100644 > > --- a/drivers/interconnect/imx/imx8mn.c > > +++ b/drivers/interconnect/imx/imx8mn.c > > @@ -72,7 +72,7 @@ static struct imx_icc_node_desc nodes[] = { > > > > static int imx8mn_icc_probe(struct platform_device *pdev) { > > - return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes)); > > + return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes), NULL); > > } > > > > static int imx8mn_icc_remove(struct platform_device *pdev) diff --git > > a/drivers/interconnect/imx/imx8mq.c > > b/drivers/interconnect/imx/imx8mq.c > > index d7768d3c6d8a..7f00a0511c6e 100644 > > --- a/drivers/interconnect/imx/imx8mq.c > > +++ b/drivers/interconnect/imx/imx8mq.c > > @@ -82,7 +82,7 @@ static struct imx_icc_node_desc nodes[] = { > > > > static int imx8mq_icc_probe(struct platform_device *pdev) { > > - return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes)); > > + return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes), NULL); > > } > > > > static int imx8mq_icc_remove(struct platform_device *pdev) >
diff --git a/drivers/interconnect/imx/imx.c b/drivers/interconnect/imx/imx.c index 78557fe6da2c..bd728caf2b85 100644 --- a/drivers/interconnect/imx/imx.c +++ b/drivers/interconnect/imx/imx.c @@ -10,6 +10,7 @@ #include <linux/device.h> #include <linux/interconnect-provider.h> +#include <linux/io.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_platform.h> @@ -21,8 +22,10 @@ /* private icc_node data */ struct imx_icc_node { const struct imx_icc_node_desc *desc; + const struct imx_icc_noc_setting *setting; struct device *qos_dev; struct dev_pm_qos_request qos_req; + struct imx_icc_provider *imx_provider; }; static int imx_icc_get_bw(struct icc_node *node, u32 *avg, u32 *peak) @@ -37,8 +40,24 @@ static int imx_icc_node_set(struct icc_node *node) { struct device *dev = node->provider->dev; struct imx_icc_node *node_data = node->data; + void __iomem *base; + u32 prio; u64 freq; + if (node_data->setting && !node_data->setting->ignore && node->peak_bw) { + base = node_data->setting->reg + node_data->imx_provider->noc_base; + if (node_data->setting->mode == IMX_NOC_MODE_FIXED) { + prio = node_data->setting->prio_level; + prio = PRIORITY_COMP_MARK | (prio << 8) | prio; + writel(prio, base + IMX_NOC_PRIO_REG); + writel(node_data->setting->mode, base + IMX_NOC_MODE_REG); + writel(node_data->setting->ext_control, base + IMX_NOC_EXT_CTL_REG); + } else { + dev_info(dev, "mode: %d not supported\n", node_data->setting->mode); + return -ENOTSUPP; + } + } + if (!node_data->qos_dev) return 0; @@ -135,7 +154,8 @@ static int imx_icc_node_init_qos(struct icc_provider *provider, } static struct icc_node *imx_icc_node_add(struct imx_icc_provider *imx_provider, - const struct imx_icc_node_desc *node_desc) + const struct imx_icc_node_desc *node_desc, + const struct imx_icc_noc_setting *setting) { struct icc_provider *provider = &imx_provider->provider; struct device *dev = provider->dev; @@ -164,6 +184,8 @@ static struct icc_node *imx_icc_node_add(struct imx_icc_provider *imx_provider, node->name = node_desc->name; node->data = node_data; node_data->desc = node_desc; + node_data->setting = setting; + node_data->imx_provider = imx_provider; icc_node_add(node, provider); if (node_desc->adj) { @@ -187,7 +209,8 @@ static void imx_icc_unregister_nodes(struct icc_provider *provider) static int imx_icc_register_nodes(struct imx_icc_provider *imx_provider, const struct imx_icc_node_desc *descs, - int count) + int count, + const struct imx_icc_noc_setting *settings) { struct icc_provider *provider = &imx_provider->provider; struct icc_onecell_data *provider_data = provider->data; @@ -199,7 +222,10 @@ static int imx_icc_register_nodes(struct imx_icc_provider *imx_provider, const struct imx_icc_node_desc *node_desc = &descs[i]; size_t j; - node = imx_icc_node_add(imx_provider, node_desc); + if (settings) + node = imx_icc_node_add(imx_provider, node_desc, &settings[node_desc->id]); + else + node = imx_icc_node_add(imx_provider, node_desc, NULL); if (IS_ERR(node)) { ret = dev_err_probe(provider->dev, PTR_ERR(node), "failed to add %s\n", node_desc->name); @@ -237,7 +263,8 @@ static int get_max_node_id(struct imx_icc_node_desc *nodes, int nodes_count) } int imx_icc_register(struct platform_device *pdev, - struct imx_icc_node_desc *nodes, int nodes_count) + struct imx_icc_node_desc *nodes, int nodes_count, + struct imx_icc_noc_setting *settings) { struct device *dev = &pdev->dev; struct icc_onecell_data *data; @@ -267,13 +294,19 @@ int imx_icc_register(struct platform_device *pdev, provider->dev->of_node = dev->parent->of_node; platform_set_drvdata(pdev, imx_provider); + if (settings) { + imx_provider->noc_base = devm_of_iomap(dev, provider->dev->of_node, 0, NULL); + if (!imx_provider->noc_base) + return PTR_ERR(imx_provider->noc_base); + } + ret = icc_provider_add(provider); if (ret) { dev_err(dev, "error adding interconnect provider: %d\n", ret); return ret; } - ret = imx_icc_register_nodes(imx_provider, nodes, nodes_count); + ret = imx_icc_register_nodes(imx_provider, nodes, nodes_count, settings); if (ret) goto provider_del; diff --git a/drivers/interconnect/imx/imx.h b/drivers/interconnect/imx/imx.h index 0ad2c654c222..1da87cfe27da 100644 --- a/drivers/interconnect/imx/imx.h +++ b/drivers/interconnect/imx/imx.h @@ -15,6 +15,31 @@ #define IMX_ICC_MAX_LINKS 4 +/* + * High throughput priority level in Regulator mode + * Read Priority in Fixed/Limiter mode + */ +#define PRIORITY0_SHIFT 0 +/* + * Low throughput priority level in Regulator mode + * Write Priority in Fixed/Limiter mode + */ +#define PRIORITY1_SHIFT 8 +#define PRIORITY_MASK 0x7 + +#define PRIORITY_COMP_MARK BIT(31) /* Must set */ + +#define IMX_NOC_MODE_FIXED 0 +#define IMX_NOC_MODE_LIMITER 1 +#define IMX_NOC_MODE_BYPASS 2 +#define IMX_NOC_MODE_REGULATOR 3 + +#define IMX_NOC_PRIO_REG 0x8 +#define IMX_NOC_MODE_REG 0xC +#define IMX_NOC_BANDWIDTH_REG 0x10 +#define IMX_NOC_SATURATION 0x14 +#define IMX_NOC_EXT_CTL_REG 0x18 + struct imx_icc_provider { void __iomem *noc_base; struct icc_provider provider; @@ -44,6 +69,22 @@ struct imx_icc_node_desc { const struct imx_icc_node_adj_desc *adj; }; +/* + * struct imx_icc_noc_setting - Describe an interconnect node setting + * @ignore: indicate whether need apply this setting + * @reg: register offset inside the NoC + * @prio_level: priority level + * @mode: functional mode + * @ext_control: external input control + */ +struct imx_icc_noc_setting { + bool ignore; + u32 reg; + u32 prio_level; + u32 mode; + u32 ext_control; +}; + #define DEFINE_BUS_INTERCONNECT(_name, _id, _adj, ...) \ { \ .id = _id, \ @@ -61,7 +102,8 @@ struct imx_icc_node_desc { int imx_icc_register(struct platform_device *pdev, struct imx_icc_node_desc *nodes, - int nodes_count); + int nodes_count, + struct imx_icc_noc_setting *noc_settings); int imx_icc_unregister(struct platform_device *pdev); #endif /* __DRIVERS_INTERCONNECT_IMX_H */ diff --git a/drivers/interconnect/imx/imx8mm.c b/drivers/interconnect/imx/imx8mm.c index 1083490bb391..ae797412db96 100644 --- a/drivers/interconnect/imx/imx8mm.c +++ b/drivers/interconnect/imx/imx8mm.c @@ -83,7 +83,7 @@ static struct imx_icc_node_desc nodes[] = { static int imx8mm_icc_probe(struct platform_device *pdev) { - return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes)); + return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes), NULL); } static int imx8mm_icc_remove(struct platform_device *pdev) diff --git a/drivers/interconnect/imx/imx8mn.c b/drivers/interconnect/imx/imx8mn.c index ad97e55fd4e5..1ce94c5bdd8c 100644 --- a/drivers/interconnect/imx/imx8mn.c +++ b/drivers/interconnect/imx/imx8mn.c @@ -72,7 +72,7 @@ static struct imx_icc_node_desc nodes[] = { static int imx8mn_icc_probe(struct platform_device *pdev) { - return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes)); + return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes), NULL); } static int imx8mn_icc_remove(struct platform_device *pdev) diff --git a/drivers/interconnect/imx/imx8mq.c b/drivers/interconnect/imx/imx8mq.c index d7768d3c6d8a..7f00a0511c6e 100644 --- a/drivers/interconnect/imx/imx8mq.c +++ b/drivers/interconnect/imx/imx8mq.c @@ -82,7 +82,7 @@ static struct imx_icc_node_desc nodes[] = { static int imx8mq_icc_probe(struct platform_device *pdev) { - return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes)); + return imx_icc_register(pdev, nodes, ARRAY_SIZE(nodes), NULL); } static int imx8mq_icc_remove(struct platform_device *pdev)