| Message ID | 20220624170740.66271-2-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] MIPS: dts: correct gpio-keys names and properties | expand |
On 24.06.2022 20:07, Krzysztof Kozlowski wrote: > The node names should be generic and DT schema expects certain pattern > (e.g. with key/button/switch). > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> Cheers. Arınç
On Fri, Jun 24, 2022 at 07:07:40PM +0200, Krzysztof Kozlowski wrote: > The node names should be generic and DT schema expects certain pattern > (e.g. with key/button/switch). > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > arch/mips/boot/dts/ingenic/ci20.dts | 2 +- > arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts | 2 +- > arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts | 2 +- > arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts | 2 +- > 4 files changed, 4 insertions(+), 4 deletions(-) applied to mips-next. Thomas.
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index ab6e3dc0bc1d..37c46720c719 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -31,7 +31,7 @@ memory { gpio-keys { compatible = "gpio-keys"; - sw1 { + switch { label = "ci20:sw1"; linux,code = <KEY_F13>; gpios = <&gpd 17 GPIO_ACTIVE_HIGH>; diff --git a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts index 826e91b840a3..179558161f85 100644 --- a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts +++ b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts @@ -26,7 +26,7 @@ gpio-keys { pinctrl-names = "default"; pinctrl-0 = <&pinmux_gpio_gpio>; /* GPIO11 */ - user_btn1 { + button { label = "USER_BTN1"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; linux,code =<KEY_PROG1> ; diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts index 37037e4f3c3b..24eebc5a85b1 100644 --- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts +++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts @@ -29,7 +29,7 @@ i2c@900 { gpio-keys { compatible = "gpio-keys"; - reset { + key-reset { label = "reset"; gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; linux,code = <KEY_RESTART>; diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts index a6201a119a1f..34006e667780 100644 --- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts +++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts @@ -29,7 +29,7 @@ i2c@900 { gpio-keys { compatible = "gpio-keys"; - reset { + key-reset { label = "reset"; gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; linux,code = <KEY_RESTART>;
The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/mips/boot/dts/ingenic/ci20.dts | 2 +- arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts | 2 +- arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts | 2 +- arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)