| Message ID | 20220701112453.2310722-3-andre.przywara@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: sunxi: Allwinner H616 SoC DT support | expand |
On Fri, 01 Jul 2022 12:24:48 +0100, Andre Przywara wrote: > The R_PIO pinctrl device on the Allwinner H616 SoC does not have an > interrupt (it features only two pins). > However the binding requires at least naming one upstream interrupt, > plus the #interrupt-cells and interrupt-controller properties. > > Drop the unconditional requirement for the interrupt properties, and > make them dependent on being not this particular pinctrl device. > > Signed-off-by: Andre Przywara <andre.przywara@arm.com> > --- > .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 15 ++++++++++++--- > 1 file changed, 12 insertions(+), 3 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org>
On 7/1/22 6:24 AM, Andre Przywara wrote: > The R_PIO pinctrl device on the Allwinner H616 SoC does not have an > interrupt (it features only two pins). > However the binding requires at least naming one upstream interrupt, > plus the #interrupt-cells and interrupt-controller properties. > > Drop the unconditional requirement for the interrupt properties, and > make them dependent on being not this particular pinctrl device. > > Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Samuel Holland <samuel@sholland.org> > --- > .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 15 ++++++++++++--- > 1 file changed, 12 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml > index bfce850c20351..0bd903954195b 100644 > --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml > @@ -133,14 +133,11 @@ patternProperties: > > required: > - "#gpio-cells" > - - "#interrupt-cells" > - compatible > - reg > - - interrupts > - clocks > - clock-names > - gpio-controller > - - interrupt-controller > > allOf: > # FIXME: We should have the pin bank supplies here, but not a lot of > @@ -148,6 +145,18 @@ allOf: > # warnings. > > - $ref: "pinctrl.yaml#" > + - if: > + not: > + properties: > + compatible: > + enum: > + - allwinner,sun50i-h616-r-pinctrl > + then: Nit: all of the existing ifs and thens have blank lines between them. > + required: > + - "#interrupt-cells" > + - interrupts > + - interrupt-controller > + > - if: > properties: > compatible: >
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index bfce850c20351..0bd903954195b 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -133,14 +133,11 @@ patternProperties: required: - "#gpio-cells" - - "#interrupt-cells" - compatible - reg - - interrupts - clocks - clock-names - gpio-controller - - interrupt-controller allOf: # FIXME: We should have the pin bank supplies here, but not a lot of @@ -148,6 +145,18 @@ allOf: # warnings. - $ref: "pinctrl.yaml#" + - if: + not: + properties: + compatible: + enum: + - allwinner,sun50i-h616-r-pinctrl + then: + required: + - "#interrupt-cells" + - interrupts + - interrupt-controller + - if: properties: compatible:
The R_PIO pinctrl device on the Allwinner H616 SoC does not have an interrupt (it features only two pins). However the binding requires at least naming one upstream interrupt, plus the #interrupt-cells and interrupt-controller properties. Drop the unconditional requirement for the interrupt properties, and make them dependent on being not this particular pinctrl device. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)