Message ID | 20220627025625.8956-1-irui.wang@mediatek.com (mailing list archive) |
---|---|
Headers | show |
Series | Enable two hardware jpeg encoder for MT8195 | expand |
Il 27/06/22 04:56, Irui Wang ha scritto: > From: kyrie wu <kyrie.wu@mediatek.com> > > This series adds support for multi hardware jpeg encoding, by first > adding use of_platform_populate to manage each hardware information: > interrupt, clock, register bases and power. Secondly add encoding > work queue to deal with the encoding requestsof multi-hardware > at the same time. Lastly, add output picture reorder function > interface to eliminate the out of order images. > > This series has been tested with MT8195 Gstreamer. > Encoding worked for this chip. > Hello Irui, Unfortunately, I can't reproduce your successful test with gstreamer: when I try to encode a jpeg with videotestsrc input, I get a kernel panic. To reproduce this behavior, please run the following: gst-launch-1.0 videotestsrc ! v4l2jpegenc ! filesink location=hwenctest.jpg Here's the panic log: [ 342.567211] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 [ 342.576014] Mem abort info: [ 342.578805] ESR = 0x0000000096000004 [ 342.582552] EC = 0x25: DABT (current EL), IL = 32 bits [ 342.587863] SET = 0, FnV = 0 [ 342.590919] EA = 0, S1PTW = 0 [ 342.594062] FSC = 0x04: level 0 translation fault [ 342.598941] Data abort info: [ 342.601826] ISV = 0, ISS = 0x00000004 [ 342.605668] CM = 0, WnR = 0 [ 342.608643] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000119029000 [ 342.615094] [0000000000000108] pgd=0000000000000000, p4d=0000000000000000 [ 342.621907] Internal error: Oops: 96000004 [#1] SMP [ 342.626800] Modules linked in: cdc_ether usbnet r8152 af_alg qrtr mt7921e mt7921_common mt76_connac_lib mt76 mac80211 btusb btrtl btintel btmtk btbcm bluetooth cfg80211 mtk_vcodec_dec_hw uvcvideo snd_sof_mt8195 ecdh_generic mtk_vcodec_dec ecc mtk_adsp_common videobuf2_vmalloc snd_sof_xtensa_dsp rfkill snd_sof_of v4l2_vp9 panfrost mtk_jpeg snd_sof v4l2_h264 mtk_jpeg_enc_hw 8021q mtk_vcodec_common cros_ec_sensors gpu_sched cros_ec_lid_angle mtk_jpeg_dec_hw hid_multitouch snd_sof_utils cros_ec_sensors_core crct10dif_ce garp cros_usbpd_logger sbs_battery mrp stp llc ipmi_devintf ipmi_msghandler fuse ipv6 [ 342.680332] CPU: 3 PID: 180 Comm: kworker/u16:6 Tainted: G W 5.19.0-rc3-next-20220622+ #814 [ 342.689982] Hardware name: MediaTek Tomato (rev2) board (DT) [ 342.695637] Workqueue: mtk-jpeg mtk_jpegenc_worker [mtk_jpeg] [ 342.701402] pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 342.708360] pc : mtk_jpegenc_worker+0x6c/0x3e0 [mtk_jpeg] [ 342.713763] lr : mtk_jpegenc_worker+0x64/0x3e0 [mtk_jpeg] [ 342.719166] sp : ffff8000093cbcd0 [ 342.722478] x29: ffff8000093cbcd0 x28: ffffb1f341cdb000 x27: ffff6089885d0505 [ 342.729618] x26: ffffb1f341ce1ee0 x25: ffffb1f341d0a2d0 x24: ffff60899078d000 [ 342.736758] x23: ffffb1f2e869c590 x22: ffff608990785458 x21: ffff60898a0ea120 [ 342.743898] x20: ffff60898a0ea080 x19: ffff60898a0ea080 x18: 0000000000000000 [ 342.751038] x17: 0000000000000000 x16: ffffb1f3405a58c0 x15: 0000aaaac092a3d0 [ 342.758178] x14: 0000000000000000 x13: 0000000000000c5f x12: 071c71c71c71c71c [ 342.765318] x11: 0000000000000c5f x10: 00000000000027a0 x9 : ffffb1f33f32ce9c [ 342.772458] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffffb1f2e8699804 [ 342.779597] x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffff608985d3c570 [ 342.786737] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 342.793876] Call trace: [ 342.796319] mtk_jpegenc_worker+0x6c/0x3e0 [mtk_jpeg] [ 342.801376] process_one_work+0x294/0x664 [ 342.805392] worker_thread+0x7c/0x45c [ 342.809055] kthread+0x104/0x110 [ 342.812283] ret_from_fork+0x10/0x20 [ 342.815863] Code: aa1503e0 9400037e f9415662 aa0003e1 (b9410840) [ 342.821956] ---[ end trace 0000000000000000 ]--- Regards, Angelo
Il 05/07/22 14:56, AngeloGioacchino Del Regno ha scritto: > Il 27/06/22 04:56, Irui Wang ha scritto: >> From: kyrie wu <kyrie.wu@mediatek.com> >> >> This series adds support for multi hardware jpeg encoding, by first >> adding use of_platform_populate to manage each hardware information: >> interrupt, clock, register bases and power. Secondly add encoding >> work queue to deal with the encoding requestsof multi-hardware >> at the same time. Lastly, add output picture reorder function >> interface to eliminate the out of order images. >> >> This series has been tested with MT8195 Gstreamer. >> Encoding worked for this chip. >> > > Hello Irui, > > Unfortunately, I can't reproduce your successful test with gstreamer: when > I try to encode a jpeg with videotestsrc input, I get a kernel panic. > > To reproduce this behavior, please run the following: > > gst-launch-1.0 videotestsrc ! v4l2jpegenc ! filesink location=hwenctest.jpg > > Adding context: I've just discovered that this issue is due to a little overlook in the probe function, which I've pointed out in the review for the specific patch that's introducing the typo. After fixing a one-liner, there's no more kernel panic, but another issue was discovered regarding runtime PM: [ 184.309766] mtk-jpeg soc:jpgenc_master: Runtime PM usage count underflow! [ 184.317970] mtk-jpeg soc:jpgenc_master: Runtime PM usage count underflow! [ 184.326128] mtk-jpeg soc:jpgenc_master: Runtime PM usage count underflow! > Here's the panic log: > > [ 342.567211] Unable to handle kernel NULL pointer dereference at virtual address > 0000000000000108 > > [ 342.576014] Mem abort info: > > [ 342.578805] ESR = 0x0000000096000004 > > [ 342.582552] EC = 0x25: DABT (current EL), IL = 32 bits > > [ 342.587863] SET = 0, FnV = 0 > > [ 342.590919] EA = 0, S1PTW = 0 > > [ 342.594062] FSC = 0x04: level 0 translation fault > > [ 342.598941] Data abort info: > > [ 342.601826] ISV = 0, ISS = 0x00000004 > > [ 342.605668] CM = 0, WnR = 0 > > [ 342.608643] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000119029000 > > [ 342.615094] [0000000000000108] pgd=0000000000000000, p4d=0000000000000000 > > [ 342.621907] Internal error: Oops: 96000004 [#1] SMP > > [ 342.626800] Modules linked in: cdc_ether usbnet r8152 af_alg qrtr mt7921e > mt7921_common mt76_connac_lib mt76 mac80211 btusb btrtl btintel btmtk btbcm > bluetooth cfg80211 mtk_vcodec_dec_hw uvcvideo snd_sof_mt8195 ecdh_generic > mtk_vcodec_dec ecc mtk_adsp_common videobuf2_vmalloc snd_sof_xtensa_dsp rfkill > snd_sof_of v4l2_vp9 panfrost mtk_jpeg snd_sof v4l2_h264 mtk_jpeg_enc_hw 8021q > mtk_vcodec_common cros_ec_sensors gpu_sched cros_ec_lid_angle mtk_jpeg_dec_hw > hid_multitouch snd_sof_utils cros_ec_sensors_core crct10dif_ce garp > cros_usbpd_logger sbs_battery mrp stp llc ipmi_devintf ipmi_msghandler fuse ipv6 > > [ 342.680332] CPU: 3 PID: 180 Comm: kworker/u16:6 Tainted: G W > 5.19.0-rc3-next-20220622+ #814 > > [ 342.689982] Hardware name: MediaTek Tomato (rev2) board (DT) > > [ 342.695637] Workqueue: mtk-jpeg mtk_jpegenc_worker [mtk_jpeg] > > [ 342.701402] pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) > > [ 342.708360] pc : mtk_jpegenc_worker+0x6c/0x3e0 [mtk_jpeg] > > [ 342.713763] lr : mtk_jpegenc_worker+0x64/0x3e0 [mtk_jpeg] > > [ 342.719166] sp : ffff8000093cbcd0 > > [ 342.722478] x29: ffff8000093cbcd0 x28: ffffb1f341cdb000 x27: ffff6089885d0505 > > [ 342.729618] x26: ffffb1f341ce1ee0 x25: ffffb1f341d0a2d0 x24: ffff60899078d000 > > [ 342.736758] x23: ffffb1f2e869c590 x22: ffff608990785458 x21: ffff60898a0ea120 > > [ 342.743898] x20: ffff60898a0ea080 x19: ffff60898a0ea080 x18: 0000000000000000 > > [ 342.751038] x17: 0000000000000000 x16: ffffb1f3405a58c0 x15: 0000aaaac092a3d0 > > [ 342.758178] x14: 0000000000000000 x13: 0000000000000c5f x12: 071c71c71c71c71c > > [ 342.765318] x11: 0000000000000c5f x10: 00000000000027a0 x9 : ffffb1f33f32ce9c > > [ 342.772458] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffffb1f2e8699804 > > [ 342.779597] x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffff608985d3c570 > > [ 342.786737] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 > > [ 342.793876] Call trace: > > [ 342.796319] mtk_jpegenc_worker+0x6c/0x3e0 [mtk_jpeg] > > [ 342.801376] process_one_work+0x294/0x664 > > [ 342.805392] worker_thread+0x7c/0x45c > > [ 342.809055] kthread+0x104/0x110 > > [ 342.812283] ret_from_fork+0x10/0x20 > > [ 342.815863] Code: aa1503e0 9400037e f9415662 aa0003e1 (b9410840) > > [ 342.821956] ---[ end trace 0000000000000000 ]--- > > > Regards, > Angelo
From: kyrie wu <kyrie.wu@mediatek.com> This series adds support for multi hardware jpeg encoding, by first adding use of_platform_populate to manage each hardware information: interrupt, clock, register bases and power. Secondly add encoding work queue to deal with the encoding requestsof multi-hardware at the same time. Lastly, add output picture reorder function interface to eliminate the out of order images. This series has been tested with MT8195 Gstreamer. Encoding worked for this chip. Patches 1 Adds jpeg encoder dt-bindings for mt8195 Patches 2 jpeg encoder builds two module for using Multi-HW, export some functions to make them visible by other modules. Patches 3 use devm_of_platform_populate to manage multi-hardware. Patch 4 add jpeg encoding timeout function to judge hardware timeout. Patch 5 add encoding work queue to deal with multi-hardware encoding at the same time. Patch 6 add output picture reorder function to order images. Patch 7 add stop cmd function to deal with EOS operation. --- This series patches dependent on: media_stage tree: [1] https://git.linuxtv.org/media_stage.git/commit/?id=b3627647f9ea7473d10fb08a95fd7c4133a17ca4 patch1 new jpegenc dt-bindings included files [2] MM IOMMU binding: https://patchwork.kernel.org/project/linux-mediatek/patch/20220217113453.13658-2-yong.wu@mediatek.com/ [3] MT8195 power domain: https://patchwork.kernel.org/project/linux-mediatek/list/?series=580579 Changes compared with v9: - some modifications for patch v9's review comments. Changes compared with v8: - some modifications for patch v8's review comments. - add stop cmd function. Changes compared with v7: - some modifications for patch v6's review comments. Changes compared with v6: - new yaml file for mt8195 jpeg encoder. - some modifications for patch v5's review comments. Changes compared with v5: - use of_platform_populate to replace component framework to manage multi-hardware in patch 2. Changes compared with v4: - No change compaered with v4 Changes compared with v3: - Structure patches for consistency, non-backward compatible and do not break any existing functionality Changes compared with v2: - Split the last two patches into several patches to enhance readability - Correct some syntax errors - Explain why the component framework is used Changes compared with v1: - Add jpeg encoder dt-bindings for MT8195 - Use component framework to manage jpegenc HW - Add jpegenc output pic reorder function interface kyrie wu (7): dt-bindings: mediatek: Add mediatek, mt8195-jpgenc compatible mtk-jpegenc: export jpeg encoder functions mtk-jpegenc: manage jpegenc multi-hardware mtk-jpegenc: add jpegenc timeout func interface mtk-jpegenc: add jpeg encode worker interface mtk-jpegenc: add output pic reorder interface mtk-jpegenc: add stop cmd interface for jpgenc .../media/mediatek,mt8195-jpegenc.yaml | 154 ++++++++++ drivers/media/platform/mediatek/jpeg/Makefile | 11 +- .../platform/mediatek/jpeg/mtk_jpeg_core.c | 290 +++++++++++++++--- .../platform/mediatek/jpeg/mtk_jpeg_core.h | 82 ++++- .../platform/mediatek/jpeg/mtk_jpeg_dec_hw.c | 1 + .../platform/mediatek/jpeg/mtk_jpeg_dec_hw.h | 3 +- .../platform/mediatek/jpeg/mtk_jpeg_enc_hw.c | 253 +++++++++++++++ 7 files changed, 743 insertions(+), 51 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml