diff mbox series

[v13,net-next,6/9] pinctrl: microchip-sgpio: add ability to be used in a non-mmio configuration

Message ID 20220705204743.3224692-7-colin.foster@in-advantage.com (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series add support for VSC7512 control over SPI | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers success CCed 6 of 6 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 26 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Colin Foster July 5, 2022, 8:47 p.m. UTC
There are a few Ocelot chips that can contain SGPIO logic, but can be
controlled externally. Specifically the VSC7511, 7512, 7513, and 7514. In
the externally controlled configurations these registers are not
memory-mapped.

Add support for these non-memory-mapped configurations.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---
 drivers/pinctrl/pinctrl-microchip-sgpio.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

Comments

Vladimir Oltean July 9, 2022, 6:58 p.m. UTC | #1
On Tue, Jul 05, 2022 at 01:47:40PM -0700, Colin Foster wrote:
> There are a few Ocelot chips that can contain SGPIO logic, but can be
> controlled externally. Specifically the VSC7511, 7512, 7513, and 7514. In
> the externally controlled configurations these registers are not
> memory-mapped.
> 
> Add support for these non-memory-mapped configurations.
> 
> Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
> ---

Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Linus Walleij July 11, 2022, 8:19 a.m. UTC | #2
On Tue, Jul 5, 2022 at 10:48 PM Colin Foster
<colin.foster@in-advantage.com> wrote:

> There are a few Ocelot chips that can contain SGPIO logic, but can be
> controlled externally. Specifically the VSC7511, 7512, 7513, and 7514. In
> the externally controlled configurations these registers are not
> memory-mapped.
>
> Add support for these non-memory-mapped configurations.
>
> Signed-off-by: Colin Foster <colin.foster@in-advantage.com>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c
index e56074b7e659..2b4167a09b3b 100644
--- a/drivers/pinctrl/pinctrl-microchip-sgpio.c
+++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c
@@ -12,6 +12,7 @@ 
 #include <linux/clk.h>
 #include <linux/gpio/driver.h>
 #include <linux/io.h>
+#include <linux/mfd/ocelot.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/pinctrl/pinmux.h>
@@ -904,7 +905,6 @@  static int microchip_sgpio_probe(struct platform_device *pdev)
 	struct reset_control *reset;
 	struct sgpio_priv *priv;
 	struct clk *clk;
-	u32 __iomem *regs;
 	u32 val;
 	struct regmap_config regmap_config = {
 		.reg_bits = 32,
@@ -937,11 +937,7 @@  static int microchip_sgpio_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	regs = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(regs))
-		return PTR_ERR(regs);
-
-	priv->regs = devm_regmap_init_mmio(dev, regs, &regmap_config);
+	priv->regs = ocelot_regmap_from_resource(pdev, 0, &regmap_config);
 	if (IS_ERR(priv->regs))
 		return PTR_ERR(priv->regs);