| Message ID | 20220705005035.14195-1-sh043.lee@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | mmc: print clock frequency with recognization | expand |
> -----Original Message----- > From: Seunghui Lee <sh043.lee@samsung.com> > Sent: Tuesday, July 5, 2022 9:51 AM > To: ulf.hansson@linaro.org; u.kleine-koenig@pengutronix.de; > gregkh@linuxfoundation.org; linux@dominikbrodowski.net; > alexandre.belloni@bootlin.com; linux-mmc@vger.kernel.org; linux- > kernel@vger.kernel.org > Cc: grant.jung@samsung.com; jt77.jang@samsung.com; > dh0421.hwang@samsung.com; junwoo80.lee@samsung.com; jangsub.yi@samsung.com; > cw9316.lee@samsung.com; sh8267.baek@samsung.com; wkon.kim@samsung.com; > seunghwan.hyun@samsung.com; Seunghui Lee <sh043.lee@samsung.com> > Subject: [PATCH] mmc: print clock frequency with recognization > > It's easy to figure out how fast frequency it has from the log. > e.g. mmc0: new ultra high speed SDR104 SDXC card at address aaaa(clk > 202000000) > > Signed-off-by: Seunghui Lee <sh043.lee@samsung.com> > --- > drivers/mmc/core/bus.c | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index > 58a60afa650b..3623cc27a61c 100644 > --- a/drivers/mmc/core/bus.c > +++ b/drivers/mmc/core/bus.c > @@ -348,7 +348,7 @@ int mmc_add_card(struct mmc_card *card) > mmc_card_ddr52(card) ? "DDR " : "", > type); > } else { > - pr_info("%s: new %s%s%s%s%s%s card at address %04x\n", > + pr_info("%s: new %s%s%s%s%s%s card at > address %04x(clk %u)\n", > mmc_hostname(card->host), > mmc_card_uhs(card) ? "ultra high speed " : > (mmc_card_hs(card) ? "high speed " : ""), @@ -356,7 > +356,8 @@ int mmc_add_card(struct mmc_card *card) > (mmc_card_hs200(card) ? "HS200 " : ""), > mmc_card_hs400es(card) ? "Enhanced strobe " : "", > mmc_card_ddr52(card) ? "DDR " : "", > - uhs_bus_speed_mode, type, card->rca); > + uhs_bus_speed_mode, type, card->rca, > + card->host->ios.clock); > } > > #ifdef CONFIG_DEBUG_FS > -- > 2.29.0 Please give me any opinion or suggestion about this commit. Normally, the SD card's bus speed depends on both host controller and internal PLL. There are lots of host controller vendor in the market as well. So, we can guess the exact clock speed from this commit.
On Tue, 5 Jul 2022 at 02:18, Seunghui Lee <sh043.lee@samsung.com> wrote: > > It's easy to figure out how fast frequency it has from the log. > e.g. mmc0: new ultra high speed SDR104 SDXC card > at address aaaa(clk 202000000) Well, this information is already available through debugfs and I think that is sufficient. Moreover, card->host->ios.clock doesn't necessarily contain that actual clock rate, but rather the rate that is requested by the core. To really know the rate the bus is running on, card->host->ios.actual_clock needs to be checked too. This too is available through debugfs. Kind regards Uffe > > Signed-off-by: Seunghui Lee <sh043.lee@samsung.com> > --- > drivers/mmc/core/bus.c | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c > index 58a60afa650b..3623cc27a61c 100644 > --- a/drivers/mmc/core/bus.c > +++ b/drivers/mmc/core/bus.c > @@ -348,7 +348,7 @@ int mmc_add_card(struct mmc_card *card) > mmc_card_ddr52(card) ? "DDR " : "", > type); > } else { > - pr_info("%s: new %s%s%s%s%s%s card at address %04x\n", > + pr_info("%s: new %s%s%s%s%s%s card at address %04x(clk %u)\n", > mmc_hostname(card->host), > mmc_card_uhs(card) ? "ultra high speed " : > (mmc_card_hs(card) ? "high speed " : ""), > @@ -356,7 +356,8 @@ int mmc_add_card(struct mmc_card *card) > (mmc_card_hs200(card) ? "HS200 " : ""), > mmc_card_hs400es(card) ? "Enhanced strobe " : "", > mmc_card_ddr52(card) ? "DDR " : "", > - uhs_bus_speed_mode, type, card->rca); > + uhs_bus_speed_mode, type, card->rca, > + card->host->ios.clock); > } > > #ifdef CONFIG_DEBUG_FS > -- > 2.29.0 >
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 58a60afa650b..3623cc27a61c 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -348,7 +348,7 @@ int mmc_add_card(struct mmc_card *card) mmc_card_ddr52(card) ? "DDR " : "", type); } else { - pr_info("%s: new %s%s%s%s%s%s card at address %04x\n", + pr_info("%s: new %s%s%s%s%s%s card at address %04x(clk %u)\n", mmc_hostname(card->host), mmc_card_uhs(card) ? "ultra high speed " : (mmc_card_hs(card) ? "high speed " : ""), @@ -356,7 +356,8 @@ int mmc_add_card(struct mmc_card *card) (mmc_card_hs200(card) ? "HS200 " : ""), mmc_card_hs400es(card) ? "Enhanced strobe " : "", mmc_card_ddr52(card) ? "DDR " : "", - uhs_bus_speed_mode, type, card->rca); + uhs_bus_speed_mode, type, card->rca, + card->host->ios.clock); } #ifdef CONFIG_DEBUG_FS
It's easy to figure out how fast frequency it has from the log. e.g. mmc0: new ultra high speed SDR104 SDXC card at address aaaa(clk 202000000) Signed-off-by: Seunghui Lee <sh043.lee@samsung.com> --- drivers/mmc/core/bus.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)