| Message ID | 20220712163345.445811-5-francesco.dolcini@toradex.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | mfd: stmpe: Probe sub-function by compatible | expand |
On 12/07/2022 18:33, Francesco Dolcini wrote: > STMPE driver does not require a specific node name anymore, only the > compatible is checked, update binding according to this. > > Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> > --- > Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 3 +-- Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Tue, 12 Jul 2022 18:33:44 +0200 Francesco Dolcini <francesco.dolcini@toradex.com> wrote: > STMPE driver does not require a specific node name anymore, only the > compatible is checked, update binding according to this. > > Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> I'm assuming this will go through mfd (or at least some tree that isn't IIO :) Shout if I should pick this up in the IIO tree. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > --- > Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml > index 9049c699152f..333744a2159c 100644 > --- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml > @@ -13,8 +13,7 @@ description: > This ADC forms part of an ST microelectronics STMPE multifunction device . > The ADC is shared with the STMPE touchscreen. As a result some ADC related > settings are specified in the parent node. > - The node name myst be stmpe_adc and should be a child node of the stmpe node > - to which it belongs. > + The node should be a child node of the stmpe node to which it belongs. > > properties: > compatible:
Hello Jonathan, can you pick this? Patches 1 and 2 were applied to MFD tree. Thanks Francesco On Tue, Jul 12, 2022 at 06:33:44PM +0200, Francesco Dolcini wrote: > STMPE driver does not require a specific node name anymore, only the > compatible is checked, update binding according to this. > > Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> > --- > Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml > index 9049c699152f..333744a2159c 100644 > --- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml > @@ -13,8 +13,7 @@ description: > This ADC forms part of an ST microelectronics STMPE multifunction device . > The ADC is shared with the STMPE touchscreen. As a result some ADC related > settings are specified in the parent node. > - The node name myst be stmpe_adc and should be a child node of the stmpe node > - to which it belongs. > + The node should be a child node of the stmpe node to which it belongs. > > properties: > compatible: > -- > 2.25.1 >
On Tue, 09 Aug 2022, Francesco Dolcini wrote: > Hello Jonathan, can you pick this? Patches 1 and 2 were applied to MFD > tree. Sending out nags whilst the merge-window is open is seldom helpful. Also, please refrain from top-posting. Thanks. > On Tue, Jul 12, 2022 at 06:33:44PM +0200, Francesco Dolcini wrote: > > STMPE driver does not require a specific node name anymore, only the > > compatible is checked, update binding according to this. > > > > Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> > > --- > > Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 3 +-- > > 1 file changed, 1 insertion(+), 2 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml > > index 9049c699152f..333744a2159c 100644 > > --- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml > > +++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml > > @@ -13,8 +13,7 @@ description: > > This ADC forms part of an ST microelectronics STMPE multifunction device . > > The ADC is shared with the STMPE touchscreen. As a result some ADC related > > settings are specified in the parent node. > > - The node name myst be stmpe_adc and should be a child node of the stmpe node > > - to which it belongs. > > + The node should be a child node of the stmpe node to which it belongs. > > > > properties: > > compatible: >
On Tue, 9 Aug 2022 16:37:27 +0100 Lee Jones <lee.jones@linaro.org> wrote: > On Tue, 09 Aug 2022, Francesco Dolcini wrote: > > > Hello Jonathan, can you pick this? Patches 1 and 2 were applied to MFD > > tree. > > Sending out nags whilst the merge-window is open is seldom helpful. Agreed, next week would have been better. I happen to be queuing stuff up ready for a rebase this cycle though so applied this one to what will be the togreg branch of iio.git after rc1 is available and I've rebased. Jonathan > > Also, please refrain from top-posting. > > Thanks. > > > On Tue, Jul 12, 2022 at 06:33:44PM +0200, Francesco Dolcini wrote: > > > STMPE driver does not require a specific node name anymore, only the > > > compatible is checked, update binding according to this. > > > > > > Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> > > > --- > > > Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 3 +-- > > > 1 file changed, 1 insertion(+), 2 deletions(-) > > > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml > > > index 9049c699152f..333744a2159c 100644 > > > --- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml > > > +++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml > > > @@ -13,8 +13,7 @@ description: > > > This ADC forms part of an ST microelectronics STMPE multifunction device . > > > The ADC is shared with the STMPE touchscreen. As a result some ADC related > > > settings are specified in the parent node. > > > - The node name myst be stmpe_adc and should be a child node of the stmpe node > > > - to which it belongs. > > > + The node should be a child node of the stmpe node to which it belongs. > > > > > > properties: > > > compatible: > > >
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml index 9049c699152f..333744a2159c 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml @@ -13,8 +13,7 @@ description: This ADC forms part of an ST microelectronics STMPE multifunction device . The ADC is shared with the STMPE touchscreen. As a result some ADC related settings are specified in the parent node. - The node name myst be stmpe_adc and should be a child node of the stmpe node - to which it belongs. + The node should be a child node of the stmpe node to which it belongs. properties: compatible:
STMPE driver does not require a specific node name anymore, only the compatible is checked, update binding according to this. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> --- Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)