diff mbox series

[V3,3/3] arm64: dts: imx8ulp-evk: Add the fec support

Message ID 20220718142257.556248-4-wei.fang@nxp.com (mailing list archive)
State New, archived
Headers show
Series Add the fec node on i.MX8ULP platform | expand

Commit Message

Wei Fang July 18, 2022, 2:22 p.m. UTC 
From: Wei Fang <wei.fang@nxp.com>

Enable the fec on i.MX8ULP EVK board.

Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
V2 change:
Add clock_ext_rmii and clock_ext_ts. They are both related to EVK board.
V3 change:
No change.
---
 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 57 +++++++++++++++++++
 1 file changed, 57 insertions(+)

Comments

Ahmad Fatoum July 18, 2022, 7:04 a.m. UTC | #1 
On 18.07.22 16:22, wei.fang@nxp.com wrote:
> From: Wei Fang <wei.fang@nxp.com>
> 
> Enable the fec on i.MX8ULP EVK board.
> 
> Signed-off-by: Wei Fang <wei.fang@nxp.com>
> ---
> V2 change:
> Add clock_ext_rmii and clock_ext_ts. They are both related to EVK board.
> V3 change:
> No change.
> ---
>  arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 57 +++++++++++++++++++
>  1 file changed, 57 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> index 33e84c4e9ed8..ebce716b10e6 100644
> --- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> @@ -19,6 +19,21 @@ memory@80000000 {
>  		device_type = "memory";
>  		reg = <0x0 0x80000000 0 0x80000000>;
>  	};
> +
> +	clock_ext_rmii: clock-ext-rmii {
> +		compatible = "fixed-clock";
> +		clock-frequency = <50000000>;
> +		clock-output-names = "ext_rmii_clk";
> +		#clock-cells = <0>;
> +	};
> +
> +	clock_ext_ts: clock-ext-ts {
> +		compatible = "fixed-clock";
> +		/* External ts clock is 50MHZ from PHY on EVK board. */
> +		clock-frequency = <50000000>;
> +		clock-output-names = "ext_ts_clk";
> +		#clock-cells = <0>;
> +	};
>  };
>  
>  &lpuart5 {
> @@ -38,7 +53,49 @@ &usdhc0 {
>  	status = "okay";
>  };
>  
> +&fec {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&pinctrl_enet>;
> +	pinctrl-1 = <&pinctrl_enet>;
> +	clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
> +		 <&pcc4 IMX8ULP_CLK_ENET>,
> +		 <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>,
> +		 <&clock_ext_rmii>;
> +	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
> +	assigned-clocks = <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>;
> +	assigned-clock-parents = <&clock_ext_ts>;
> +	phy-mode = "rmii";
> +	phy-handle = <&ethphy>;
> +	status = "okay";
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethphy: ethernet-phy {

@1

> +			reg = <1>;
> +			micrel,led-mode = <1>;
> +		};
> +	};
> +};
> +
>  &iomuxc1 {
> +	pinctrl_enet: enetgrp {
> +		fsl,pins = <
> +			MX8ULP_PAD_PTE15__ENET0_MDC     0x43
> +			MX8ULP_PAD_PTE14__ENET0_MDIO    0x43
> +			MX8ULP_PAD_PTE17__ENET0_RXER    0x43
> +			MX8ULP_PAD_PTE18__ENET0_CRS_DV  0x43
> +			MX8ULP_PAD_PTF1__ENET0_RXD0     0x43
> +			MX8ULP_PAD_PTE20__ENET0_RXD1    0x43
> +			MX8ULP_PAD_PTE16__ENET0_TXEN    0x43
> +			MX8ULP_PAD_PTE23__ENET0_TXD0    0x43
> +			MX8ULP_PAD_PTE22__ENET0_TXD1    0x43
> +			MX8ULP_PAD_PTE19__ENET0_REFCLK  0x43
> +			MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43
> +		>;
> +	};
> +
>  	pinctrl_lpuart5: lpuart5grp {
>  		fsl,pins = <
>  			MX8ULP_PAD_PTF14__LPUART5_TX	0x3
Andrew Lunn July 18, 2022, 10:04 p.m. UTC | #2 
> > +	mdio {
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		ethphy: ethernet-phy {
> 
> @1

The DT tools should of warned about this as well. So maybe the build
testing needs extending to run all the DT tools?

	Andrew
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
index 33e84c4e9ed8..ebce716b10e6 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
@@ -19,6 +19,21 @@  memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0 0x80000000>;
 	};
+
+	clock_ext_rmii: clock-ext-rmii {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		clock-output-names = "ext_rmii_clk";
+		#clock-cells = <0>;
+	};
+
+	clock_ext_ts: clock-ext-ts {
+		compatible = "fixed-clock";
+		/* External ts clock is 50MHZ from PHY on EVK board. */
+		clock-frequency = <50000000>;
+		clock-output-names = "ext_ts_clk";
+		#clock-cells = <0>;
+	};
 };
 
 &lpuart5 {
@@ -38,7 +53,49 @@  &usdhc0 {
 	status = "okay";
 };
 
+&fec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_enet>;
+	pinctrl-1 = <&pinctrl_enet>;
+	clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+		 <&pcc4 IMX8ULP_CLK_ENET>,
+		 <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>,
+		 <&clock_ext_rmii>;
+	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+	assigned-clocks = <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>;
+	assigned-clock-parents = <&clock_ext_ts>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			reg = <1>;
+			micrel,led-mode = <1>;
+		};
+	};
+};
+
 &iomuxc1 {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX8ULP_PAD_PTE15__ENET0_MDC     0x43
+			MX8ULP_PAD_PTE14__ENET0_MDIO    0x43
+			MX8ULP_PAD_PTE17__ENET0_RXER    0x43
+			MX8ULP_PAD_PTE18__ENET0_CRS_DV  0x43
+			MX8ULP_PAD_PTF1__ENET0_RXD0     0x43
+			MX8ULP_PAD_PTE20__ENET0_RXD1    0x43
+			MX8ULP_PAD_PTE16__ENET0_TXEN    0x43
+			MX8ULP_PAD_PTE23__ENET0_TXD0    0x43
+			MX8ULP_PAD_PTE22__ENET0_TXD1    0x43
+			MX8ULP_PAD_PTE19__ENET0_REFCLK  0x43
+			MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43
+		>;
+	};
+
 	pinctrl_lpuart5: lpuart5grp {
 		fsl,pins = <
 			MX8ULP_PAD_PTF14__LPUART5_TX	0x3