| Message ID | 20220704113622.18887-1-kabel@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [mvebu/dt,1/2] ARM: dts: turris-omnia: configure LED[0] pin function to link/activity | expand |
Marek Behún <kabel@kernel.org> writes: > The marvell PHY driver changes the LED[0] pin function to "On - 1000 > Mbps Link, Off - Else". > > Turris Omnia expects that the function is "On - Link, Blink - Activity, > Off - No link". > > Use the `marvell,reg-init` DT property to change the function. > > In the future, once netdev trigger will support HW offloading, we will > be able to have this configured via the combination of PHY driver and > leds-turris-omnia driver. > > Signed-off-by: Marek Behún <kabel@kernel.org> Applied on mvebu/dt Thanks, Gregory > --- > arch/arm/boot/dts/armada-385-turris-omnia.dts | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts > index f4878df39753..1583c4b14ae8 100644 > --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts > +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts > @@ -397,7 +397,8 @@ &mdio { > phy1: ethernet-phy@1 { > compatible = "ethernet-phy-ieee802.3-c22"; > reg = <1>; > - marvell,reg-init = <3 18 0 0x4985>; > + marvell,reg-init = <3 18 0 0x4985>, > + <3 16 0xfff0 0x0001>; > > /* irq is connected to &pcawan pin 7 */ > }; > -- > 2.35.1 >
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index f4878df39753..1583c4b14ae8 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -397,7 +397,8 @@ &mdio { phy1: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; - marvell,reg-init = <3 18 0 0x4985>; + marvell,reg-init = <3 18 0 0x4985>, + <3 16 0xfff0 0x0001>; /* irq is connected to &pcawan pin 7 */ };
The marvell PHY driver changes the LED[0] pin function to "On - 1000 Mbps Link, Off - Else". Turris Omnia expects that the function is "On - Link, Blink - Activity, Off - No link". Use the `marvell,reg-init` DT property to change the function. In the future, once netdev trigger will support HW offloading, we will be able to have this configured via the combination of PHY driver and leds-turris-omnia driver. Signed-off-by: Marek Behún <kabel@kernel.org> --- arch/arm/boot/dts/armada-385-turris-omnia.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)