diff mbox series

[v6,3/3] arm64: dts: qcom: Add LTE SKUs for sc7280-villager family

Message ID SG2PR03MB5006A2ADC6ED22199D8C88D9CC8C9@SG2PR03MB5006.apcprd03.prod.outlook.com (mailing list archive)
State Superseded
Headers show
Series Add new board revision and LTE SKUs for sc7280-villager family | expand

Commit Message

Jimmy Chen July 18, 2022, 7:31 a.m. UTC
This adds LTE skus for villager device tree files.

Signed-off-by: Jimmy Chen <jinghung.chen3@hotmail.com>
---

Changes in v6:
- Remove v5 accidentally added sc7280-herobrine-herobrine-r1-lte.dts

Changes in v5:
- Reorder '.dtb' in Makefile
- Put the "interconnects" line back

Changes in v4:
- Reorder 'status' last

 arch/arm64/boot/dts/qcom/Makefile               |  2 ++
 .../boot/dts/qcom/sc7280-chrome-common.dtsi     | 11 -----------
 .../boot/dts/qcom/sc7280-herobrine-crd.dts      |  1 +
 .../dts/qcom/sc7280-herobrine-herobrine-r1.dts  |  1 +
 .../boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 17 +++++++++++++++++
 .../qcom/sc7280-herobrine-villager-r0-lte.dts   | 14 ++++++++++++++
 .../qcom/sc7280-herobrine-villager-r1-lte.dts   | 14 ++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280-idp.dts         |  1 +
 8 files changed, 50 insertions(+), 11 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts

Comments

Doug Anderson July 18, 2022, 1:58 p.m. UTC | #1
Hi,

On Mon, Jul 18, 2022 at 12:31 AM Jimmy Chen <jinghung.chen3@hotmail.com> wrote:
>
> This adds LTE skus for villager device tree files.
>
> Signed-off-by: Jimmy Chen <jinghung.chen3@hotmail.com>
> ---
>
> Changes in v6:
> - Remove v5 accidentally added sc7280-herobrine-herobrine-r1-lte.dts
>
> Changes in v5:
> - Reorder '.dtb' in Makefile
> - Put the "interconnects" line back
>
> Changes in v4:
> - Reorder 'status' last
>
>  arch/arm64/boot/dts/qcom/Makefile               |  2 ++
>  .../boot/dts/qcom/sc7280-chrome-common.dtsi     | 11 -----------
>  .../boot/dts/qcom/sc7280-herobrine-crd.dts      |  1 +
>  .../dts/qcom/sc7280-herobrine-herobrine-r1.dts  |  1 +
>  .../boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 17 +++++++++++++++++
>  .../qcom/sc7280-herobrine-villager-r0-lte.dts   | 14 ++++++++++++++
>  .../qcom/sc7280-herobrine-villager-r1-lte.dts   | 14 ++++++++++++++
>  arch/arm64/boot/dts/qcom/sc7280-idp.dts         |  1 +
>  8 files changed, 50 insertions(+), 11 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Doug Anderson July 21, 2022, 7:58 p.m. UTC | #2
Hi,

On Mon, Jul 18, 2022 at 12:31 AM Jimmy Chen <jinghung.chen3@hotmail.com> wrote:
>
> This adds LTE skus for villager device tree files.
>
> Signed-off-by: Jimmy Chen <jinghung.chen3@hotmail.com>
> ---
>
> Changes in v6:
> - Remove v5 accidentally added sc7280-herobrine-herobrine-r1-lte.dts
>
> Changes in v5:
> - Reorder '.dtb' in Makefile
> - Put the "interconnects" line back
>
> Changes in v4:
> - Reorder 'status' last
>
>  arch/arm64/boot/dts/qcom/Makefile               |  2 ++
>  .../boot/dts/qcom/sc7280-chrome-common.dtsi     | 11 -----------
>  .../boot/dts/qcom/sc7280-herobrine-crd.dts      |  1 +
>  .../dts/qcom/sc7280-herobrine-herobrine-r1.dts  |  1 +
>  .../boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 17 +++++++++++++++++
>  .../qcom/sc7280-herobrine-villager-r0-lte.dts   | 14 ++++++++++++++
>  .../qcom/sc7280-herobrine-villager-r1-lte.dts   | 14 ++++++++++++++
>  arch/arm64/boot/dts/qcom/sc7280-idp.dts         |  1 +
>  8 files changed, 50 insertions(+), 11 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 7e6a4d7ef3266..bd43d984f69fc 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -103,7 +103,9 @@ dtb-$(CONFIG_ARCH_QCOM)     += sc7180-trogdor-r1-lte.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7280-herobrine-crd.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7280-herobrine-herobrine-r1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7280-herobrine-villager-r0.dtb
> +dtb-$(CONFIG_ARCH_QCOM)        += sc7280-herobrine-villager-r0-lte.dtb
>  dtb-$(CONFIG_ARCG_QCOM)        += sc7280-herobrine-villager-r1.dtb
> +dtb-$(CONFIG_ARCH_QCOM)        += sc7280-herobrine-villager-r1-lte.dtb

Whoops! Looks like you'll need a v7. There's a subtle typo above.
"ARCH" doesn't end with a "G".

-Doug
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 7e6a4d7ef3266..bd43d984f69fc 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -103,7 +103,9 @@  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-crd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-herobrine-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-villager-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-villager-r0-lte.dtb
 dtb-$(CONFIG_ARCG_QCOM)	+= sc7280-herobrine-villager-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-villager-r1-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd-r3.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
index cfe2741456a1a..25f31c81b2b74 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -83,17 +83,6 @@  spi_flash: flash@0 {
 	};
 };
 
-/* Modem setup is different on Chrome setups than typical Qualcomm setup */
-&remoteproc_mpss {
-	status = "okay";
-	compatible = "qcom,sc7280-mss-pil";
-	iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
-	interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
-	memory-region = <&mba_mem>, <&mpss_mem>;
-	firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn",
-			"qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
-};
-
 &remoteproc_wpss {
 	status = "okay";
 	firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
index e9ca6c5d24a16..921eccfec39ae 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
@@ -9,6 +9,7 @@ 
 
 #include "sc7280-herobrine.dtsi"
 #include "sc7280-herobrine-audio-wcd9385.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
index c1647a85a371a..c1a6719687252 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
@@ -8,6 +8,7 @@ 
 /dts-v1/;
 
 #include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
 
 / {
 	model = "Google Herobrine (rev1+)";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
new file mode 100644
index 0000000000000..a92eeccd2b2a9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
@@ -0,0 +1,17 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Herobrine dts fragment for LTE SKUs
+ *
+ * Copyright 2022 Google LLC.
+ */
+/* Modem setup is different on Chrome setups than typical Qualcomm setup */
+
+&remoteproc_mpss {
+	compatible = "qcom,sc7280-mss-pil";
+	iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
+	interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+	memory-region = <&mba_mem>, <&mpss_mem>;
+	firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn",
+			"qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
new file mode 100644
index 0000000000000..672cb78e3088f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
@@ -0,0 +1,14 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Villager board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include "sc7280-herobrine-villager-r0.dts"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Google Villager (rev0) with LTE";
+	compatible = "google,villager-rev0-sku0", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
new file mode 100644
index 0000000000000..2f05a19cc388e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
@@ -0,0 +1,14 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Villager board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include "sc7280-herobrine-villager-r1.dts"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Google Villager (rev1+) with LTE";
+	compatible = "google,villager-sku0", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 6d3ff80582ae9..fba7e938ce35a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -10,6 +10,7 @@ 
 #include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
 #include "sc7280-idp.dtsi"
 #include "pmr735a.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform";