| Message ID | 20220715073300.868087-1-alexander.stein@ew.tq-group.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/3] dt-bindings: usb: Add binding for TI USB8041 hub controller | expand |
On 15/07/2022 09:32, Alexander Stein wrote: > The TI USB8041 is a USB 3.0 hub controller with 4 ports. > > This initial version of the binding only describes USB related aspects > of the USB8041, it does not cover the option of connecting the controller > as an i2c slave. > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> > --- > Changes in v2: > * Removed 'items' from compatible, it's just en enum now > * Rename reset-gpio to reset-gpios > * Use 'items' for reset-gpios > * Adjust description of vdd-supply > * Sorted required list > * Adjusted example > > .../devicetree/bindings/usb/ti,usb8041.yaml | 67 +++++++++++++++++++ > 1 file changed, 67 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/ti,usb8041.yaml > > diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml > new file mode 100644 > index 000000000000..7fe7416e2b51 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml > @@ -0,0 +1,67 @@ > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/usb/ti,usb8041.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Binding for the TI USB8041 USB 3.0 hub controller > + > +maintainers: > + - Matthias Kaehlcke <mka@chromium.org> > + > +allOf: > + - $ref: usb-device.yaml# > + > +properties: > + compatible: > + enum: > + - usb451,8140 > + - usb451,8142 > + > + reg: true > + > + reset-gpios: > + items: > + - description: GPIO specifier for GRST# pin. > + > + vdd-supply: > + description: > + "VDD power supply to the hub" No quotes needed. Best regards, Krzysztof
On Fri, Jul 15, 2022 at 09:32:58AM +0200, Alexander Stein wrote: > The TI USB8041 is a USB 3.0 hub controller with 4 ports. > > This initial version of the binding only describes USB related aspects > of the USB8041, it does not cover the option of connecting the controller > as an i2c slave. > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> > --- > Changes in v2: > * Removed 'items' from compatible, it's just en enum now > * Rename reset-gpio to reset-gpios > * Use 'items' for reset-gpios > * Adjust description of vdd-supply > * Sorted required list > * Adjusted example > > .../devicetree/bindings/usb/ti,usb8041.yaml | 67 +++++++++++++++++++ > 1 file changed, 67 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/ti,usb8041.yaml > > diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml > new file mode 100644 > index 000000000000..7fe7416e2b51 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml > @@ -0,0 +1,67 @@ > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/usb/ti,usb8041.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Binding for the TI USB8041 USB 3.0 hub controller > + > +maintainers: > + - Matthias Kaehlcke <mka@chromium.org> Not sure this should be me, just because I'm the author/maintainer of the onboard_usb_hub driver, which may be used for this hub. > + > +allOf: > + - $ref: usb-device.yaml# > + > +properties: > + compatible: > + enum: > + - usb451,8140 > + - usb451,8142 > + > + reg: true > + > + reset-gpios: > + items: > + - description: GPIO specifier for GRST# pin. > + > + vdd-supply: > + description: > + "VDD power supply to the hub" > + > + peer-hub: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: > + phandle to the peer hub on the controller. > + > +required: > + - compatible > + - reg > + - peer-hub > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + usb { > + dr_mode = "host"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* 2.0 hub on port 1 */ > + hub_2_0: hub@1 { > + compatible = "usb451,8142"; > + reg = <1>; > + peer-hub = <&hub_3_0>; > + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; > + }; > + > + /* 3.0 hub on port 2 */ > + hub_3_0: hub@2 { > + compatible = "usb451,8140"; > + reg = <2>; > + peer-hub = <&hub_2_0>; > + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; > + }; > + }; > -- > 2.25.1 >
Hi Matthias, Am Samstag, 16. Juli 2022, 01:53:12 CEST schrieb Matthias Kaehlcke: > On Fri, Jul 15, 2022 at 09:32:58AM +0200, Alexander Stein wrote: > > The TI USB8041 is a USB 3.0 hub controller with 4 ports. > > > > This initial version of the binding only describes USB related aspects > > of the USB8041, it does not cover the option of connecting the controller > > as an i2c slave. > > > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> > > --- > > Changes in v2: > > * Removed 'items' from compatible, it's just en enum now > > * Rename reset-gpio to reset-gpios > > * Use 'items' for reset-gpios > > * Adjust description of vdd-supply > > * Sorted required list > > * Adjusted example > > > > .../devicetree/bindings/usb/ti,usb8041.yaml | 67 +++++++++++++++++++ > > 1 file changed, 67 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/usb/ti,usb8041.yaml > > > > diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml > > b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml new file mode > > 100644 > > index 000000000000..7fe7416e2b51 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml > > @@ -0,0 +1,67 @@ > > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/usb/ti,usb8041.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Binding for the TI USB8041 USB 3.0 hub controller > > + > > +maintainers: > > + - Matthias Kaehlcke <mka@chromium.org> > > Not sure this should be me, just because I'm the author/maintainer of > the onboard_usb_hub driver, which may be used for this hub. Sure, if you are uncomfortable I'll add myself here. Regards, Alexander > > + > > +allOf: > > + - $ref: usb-device.yaml# > > + > > +properties: > > + compatible: > > + enum: > > + - usb451,8140 > > + - usb451,8142 > > + > > + reg: true > > + > > + reset-gpios: > > + items: > > + - description: GPIO specifier for GRST# pin. > > + > > + vdd-supply: > > + description: > > + "VDD power supply to the hub" > > + > > + peer-hub: > > + $ref: /schemas/types.yaml#/definitions/phandle > > + description: > > + phandle to the peer hub on the controller. > > + > > +required: > > + - compatible > > + - reg > > + - peer-hub > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/gpio/gpio.h> > > + > > + usb { > > + dr_mode = "host"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + /* 2.0 hub on port 1 */ > > + hub_2_0: hub@1 { > > + compatible = "usb451,8142"; > > + reg = <1>; > > + peer-hub = <&hub_3_0>; > > + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; > > + }; > > + > > + /* 3.0 hub on port 2 */ > > + hub_3_0: hub@2 { > > + compatible = "usb451,8140"; > > + reg = <2>; > > + peer-hub = <&hub_2_0>; > > + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; > > + }; > > + };
Hi Krzysztof, Am Freitag, 15. Juli 2022, 10:17:31 CEST schrieb Krzysztof Kozlowski: > On 15/07/2022 09:32, Alexander Stein wrote: > > The TI USB8041 is a USB 3.0 hub controller with 4 ports. > > > > This initial version of the binding only describes USB related aspects > > of the USB8041, it does not cover the option of connecting the controller > > as an i2c slave. > > > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> > > --- > > Changes in v2: > > * Removed 'items' from compatible, it's just en enum now > > * Rename reset-gpio to reset-gpios > > * Use 'items' for reset-gpios > > * Adjust description of vdd-supply > > * Sorted required list > > * Adjusted example > > > > .../devicetree/bindings/usb/ti,usb8041.yaml | 67 +++++++++++++++++++ > > 1 file changed, 67 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/usb/ti,usb8041.yaml > > > > diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml > > b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml new file mode > > 100644 > > index 000000000000..7fe7416e2b51 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml > > @@ -0,0 +1,67 @@ > > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/usb/ti,usb8041.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Binding for the TI USB8041 USB 3.0 hub controller > > + > > +maintainers: > > + - Matthias Kaehlcke <mka@chromium.org> > > + > > +allOf: > > + - $ref: usb-device.yaml# > > + > > +properties: > > + compatible: > > + enum: > > + - usb451,8140 > > + - usb451,8142 > > + > > + reg: true > > + > > + reset-gpios: > > + items: > > + - description: GPIO specifier for GRST# pin. > > + > > + vdd-supply: > > + description: > > + "VDD power supply to the hub" > > No quotes needed. Fixed, thanks. Regards, Alexander
diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml new file mode 100644 index 000000000000..7fe7416e2b51 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,usb8041.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for the TI USB8041 USB 3.0 hub controller + +maintainers: + - Matthias Kaehlcke <mka@chromium.org> + +allOf: + - $ref: usb-device.yaml# + +properties: + compatible: + enum: + - usb451,8140 + - usb451,8142 + + reg: true + + reset-gpios: + items: + - description: GPIO specifier for GRST# pin. + + vdd-supply: + description: + "VDD power supply to the hub" + + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the peer hub on the controller. + +required: + - compatible + - reg + - peer-hub + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + usb { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb451,8142"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb451,8140"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + };
The TI USB8041 is a USB 3.0 hub controller with 4 ports. This initial version of the binding only describes USB related aspects of the USB8041, it does not cover the option of connecting the controller as an i2c slave. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- Changes in v2: * Removed 'items' from compatible, it's just en enum now * Rename reset-gpio to reset-gpios * Use 'items' for reset-gpios * Adjust description of vdd-supply * Sorted required list * Adjusted example .../devicetree/bindings/usb/ti,usb8041.yaml | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ti,usb8041.yaml