@@ -520,7 +520,6 @@ struct hci_dev {
struct work_struct cmd_work;
struct work_struct tx_work;
- struct work_struct discov_update;
struct work_struct scan_update;
struct delayed_work le_scan_disable;
struct delayed_work le_scan_restart;
@@ -2227,146 +2227,6 @@ static void le_scan_restart_work(struct work_struct *work)
hci_dev_unlock(hdev);
}
-static int active_scan(struct hci_request *req, unsigned long opt)
-{
- uint16_t interval = opt;
- struct hci_dev *hdev = req->hdev;
- u8 own_addr_type;
- /* Accept list is not used for discovery */
- u8 filter_policy = 0x00;
- /* Default is to enable duplicates filter */
- u8 filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
- /* Discovery doesn't require controller address resolution */
- bool addr_resolv = false;
- int err;
-
- bt_dev_dbg(hdev, "");
-
- /* If controller is scanning, it means the background scanning is
- * running. Thus, we should temporarily stop it in order to set the
- * discovery scanning parameters.
- */
- if (hci_dev_test_flag(hdev, HCI_LE_SCAN)) {
- hci_req_add_le_scan_disable(req, false);
- cancel_interleave_scan(hdev);
- }
-
- /* All active scans will be done with either a resolvable private
- * address (when privacy feature has been enabled) or non-resolvable
- * private address.
- */
- err = hci_update_random_address(req, true, scan_use_rpa(hdev),
- &own_addr_type);
- if (err < 0)
- own_addr_type = ADDR_LE_DEV_PUBLIC;
-
- hci_dev_lock(hdev);
- if (hci_is_adv_monitoring(hdev)) {
- /* Duplicate filter should be disabled when some advertisement
- * monitor is activated, otherwise AdvMon can only receive one
- * advertisement for one peer(*) during active scanning, and
- * might report loss to these peers.
- *
- * Note that different controllers have different meanings of
- * |duplicate|. Some of them consider packets with the same
- * address as duplicate, and others consider packets with the
- * same address and the same RSSI as duplicate. Although in the
- * latter case we don't need to disable duplicate filter, but
- * it is common to have active scanning for a short period of
- * time, the power impact should be neglectable.
- */
- filter_dup = LE_SCAN_FILTER_DUP_DISABLE;
- }
- hci_dev_unlock(hdev);
-
- hci_req_start_scan(req, LE_SCAN_ACTIVE, interval,
- hdev->le_scan_window_discovery, own_addr_type,
- filter_policy, filter_dup, addr_resolv);
- return 0;
-}
-
-static int interleaved_discov(struct hci_request *req, unsigned long opt)
-{
- int err;
-
- bt_dev_dbg(req->hdev, "");
-
- err = active_scan(req, opt);
- if (err)
- return err;
-
- return bredr_inquiry(req, DISCOV_BREDR_INQUIRY_LEN);
-}
-
-static void start_discovery(struct hci_dev *hdev, u8 *status)
-{
- unsigned long timeout;
-
- bt_dev_dbg(hdev, "type %u", hdev->discovery.type);
-
- switch (hdev->discovery.type) {
- case DISCOV_TYPE_BREDR:
- if (!hci_dev_test_flag(hdev, HCI_INQUIRY))
- hci_req_sync(hdev, bredr_inquiry,
- DISCOV_BREDR_INQUIRY_LEN, HCI_CMD_TIMEOUT,
- status);
- return;
- case DISCOV_TYPE_INTERLEAVED:
- /* When running simultaneous discovery, the LE scanning time
- * should occupy the whole discovery time sine BR/EDR inquiry
- * and LE scanning are scheduled by the controller.
- *
- * For interleaving discovery in comparison, BR/EDR inquiry
- * and LE scanning are done sequentially with separate
- * timeouts.
- */
- if (test_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY,
- &hdev->quirks)) {
- timeout = msecs_to_jiffies(DISCOV_LE_TIMEOUT);
- /* During simultaneous discovery, we double LE scan
- * interval. We must leave some time for the controller
- * to do BR/EDR inquiry.
- */
- hci_req_sync(hdev, interleaved_discov,
- hdev->le_scan_int_discovery * 2, HCI_CMD_TIMEOUT,
- status);
- break;
- }
-
- timeout = msecs_to_jiffies(hdev->discov_interleaved_timeout);
- hci_req_sync(hdev, active_scan, hdev->le_scan_int_discovery,
- HCI_CMD_TIMEOUT, status);
- break;
- case DISCOV_TYPE_LE:
- timeout = msecs_to_jiffies(DISCOV_LE_TIMEOUT);
- hci_req_sync(hdev, active_scan, hdev->le_scan_int_discovery,
- HCI_CMD_TIMEOUT, status);
- break;
- default:
- *status = HCI_ERROR_UNSPECIFIED;
- return;
- }
-
- if (*status)
- return;
-
- bt_dev_dbg(hdev, "timeout %u ms", jiffies_to_msecs(timeout));
-
- /* When service discovery is used and the controller has a
- * strict duplicate filter, it is important to remember the
- * start and duration of the scan. This is required for
- * restarting scanning during the discovery phase.
- */
- if (test_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks) &&
- hdev->discovery.result_filtering) {
- hdev->discovery.scan_start = jiffies;
- hdev->discovery.scan_duration = timeout;
- }
-
- queue_delayed_work(hdev->req_workqueue, &hdev->le_scan_disable,
- timeout);
-}
-
bool hci_req_stop_discovery(struct hci_request *req)
{
struct hci_dev *hdev = req->hdev;
@@ -2462,42 +2322,6 @@ int hci_req_configure_datapath(struct hci_dev *hdev, struct bt_codec *codec)
return err;
}
-static int stop_discovery(struct hci_request *req, unsigned long opt)
-{
- hci_dev_lock(req->hdev);
- hci_req_stop_discovery(req);
- hci_dev_unlock(req->hdev);
-
- return 0;
-}
-
-static void discov_update(struct work_struct *work)
-{
- struct hci_dev *hdev = container_of(work, struct hci_dev,
- discov_update);
- u8 status = 0;
-
- switch (hdev->discovery.state) {
- case DISCOVERY_STARTING:
- start_discovery(hdev, &status);
- mgmt_start_discovery_complete(hdev, status);
- if (status)
- hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
- else
- hci_discovery_set_state(hdev, DISCOVERY_FINDING);
- break;
- case DISCOVERY_STOPPING:
- hci_req_sync(hdev, stop_discovery, 0, HCI_CMD_TIMEOUT, &status);
- mgmt_stop_discovery_complete(hdev, status);
- if (!status)
- hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
- break;
- case DISCOVERY_STOPPED:
- default:
- return;
- }
-}
-
static void discov_off(struct work_struct *work)
{
struct hci_dev *hdev = container_of(work, struct hci_dev,
@@ -2522,118 +2346,8 @@ static void discov_off(struct work_struct *work)
mgmt_new_settings(hdev);
}
-static int powered_update_hci(struct hci_request *req, unsigned long opt)
-{
- struct hci_dev *hdev = req->hdev;
- u8 link_sec;
-
- hci_dev_lock(hdev);
-
- if (hci_dev_test_flag(hdev, HCI_SSP_ENABLED) &&
- !lmp_host_ssp_capable(hdev)) {
- u8 mode = 0x01;
-
- hci_req_add(req, HCI_OP_WRITE_SSP_MODE, sizeof(mode), &mode);
-
- if (bredr_sc_enabled(hdev) && !lmp_host_sc_capable(hdev)) {
- u8 support = 0x01;
-
- hci_req_add(req, HCI_OP_WRITE_SC_SUPPORT,
- sizeof(support), &support);
- }
- }
-
- if (hci_dev_test_flag(hdev, HCI_LE_ENABLED) &&
- lmp_bredr_capable(hdev)) {
- struct hci_cp_write_le_host_supported cp;
-
- cp.le = 0x01;
- cp.simul = 0x00;
-
- /* Check first if we already have the right
- * host state (host features set)
- */
- if (cp.le != lmp_host_le_capable(hdev) ||
- cp.simul != lmp_host_le_br_capable(hdev))
- hci_req_add(req, HCI_OP_WRITE_LE_HOST_SUPPORTED,
- sizeof(cp), &cp);
- }
-
- if (hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
- /* Make sure the controller has a good default for
- * advertising data. This also applies to the case
- * where BR/EDR was toggled during the AUTO_OFF phase.
- */
- if (hci_dev_test_flag(hdev, HCI_ADVERTISING) ||
- list_empty(&hdev->adv_instances)) {
- int err;
-
- if (ext_adv_capable(hdev)) {
- err = __hci_req_setup_ext_adv_instance(req,
- 0x00);
- if (!err)
- __hci_req_update_scan_rsp_data(req,
- 0x00);
- } else {
- err = 0;
- __hci_req_update_adv_data(req, 0x00);
- __hci_req_update_scan_rsp_data(req, 0x00);
- }
-
- if (hci_dev_test_flag(hdev, HCI_ADVERTISING)) {
- if (!ext_adv_capable(hdev))
- __hci_req_enable_advertising(req);
- else if (!err)
- __hci_req_enable_ext_advertising(req,
- 0x00);
- }
- } else if (!list_empty(&hdev->adv_instances)) {
- struct adv_info *adv_instance;
-
- adv_instance = list_first_entry(&hdev->adv_instances,
- struct adv_info, list);
- __hci_req_schedule_adv_instance(req,
- adv_instance->instance,
- true);
- }
- }
-
- link_sec = hci_dev_test_flag(hdev, HCI_LINK_SECURITY);
- if (link_sec != test_bit(HCI_AUTH, &hdev->flags))
- hci_req_add(req, HCI_OP_WRITE_AUTH_ENABLE,
- sizeof(link_sec), &link_sec);
-
- if (lmp_bredr_capable(hdev)) {
- if (hci_dev_test_flag(hdev, HCI_FAST_CONNECTABLE))
- __hci_req_write_fast_connectable(req, true);
- else
- __hci_req_write_fast_connectable(req, false);
- __hci_req_update_scan(req);
- __hci_req_update_class(req);
- __hci_req_update_name(req);
- __hci_req_update_eir(req);
- }
-
- hci_dev_unlock(hdev);
- return 0;
-}
-
-int __hci_req_hci_power_on(struct hci_dev *hdev)
-{
- /* Register the available SMP channels (BR/EDR and LE) only when
- * successfully powering on the controller. This late
- * registration is required so that LE SMP can clearly decide if
- * the public address or static address is used.
- */
- smp_register(hdev);
-
- return __hci_req_sync(hdev, powered_update_hci, 0, HCI_CMD_TIMEOUT,
- NULL);
-}
-
void hci_request_setup(struct hci_dev *hdev)
{
- INIT_WORK(&hdev->discov_update, discov_update);
INIT_WORK(&hdev->scan_update, scan_update_work);
INIT_DELAYED_WORK(&hdev->discov_off, discov_off);
INIT_DELAYED_WORK(&hdev->le_scan_disable, le_scan_disable_work);
@@ -2646,7 +2360,6 @@ void hci_request_cancel_all(struct hci_dev *hdev)
{
__hci_cmd_sync_cancel(hdev, ENODEV);
- cancel_work_sync(&hdev->discov_update);
cancel_work_sync(&hdev->scan_update);
cancel_delayed_work_sync(&hdev->discov_off);
cancel_delayed_work_sync(&hdev->le_scan_disable);
@@ -68,8 +68,6 @@ int __hci_req_sync(struct hci_dev *hdev, int (*func)(struct hci_request *req,
struct sk_buff *hci_prepare_cmd(struct hci_dev *hdev, u16 opcode, u32 plen,
const void *param);
-int __hci_req_hci_power_on(struct hci_dev *hdev);
-
void __hci_req_write_fast_connectable(struct hci_request *req, bool enable);
void __hci_req_update_name(struct hci_request *req);
void __hci_req_update_eir(struct hci_request *req);
The discov_update work queue is no longer used as a result of the hci_sync rework. The __hci_req_hci_power_on() function is no longer referenced in the code as a result of the hci_sync rework. Signed-off-by: Brian Gix <brian.gix@intel.com> --- include/net/bluetooth/hci_core.h | 1 - net/bluetooth/hci_request.c | 287 ------------------------------- net/bluetooth/hci_request.h | 2 - 3 files changed, 290 deletions(-)