@@ -167,70 +167,65 @@ properties:
- in-band-status
fixed-link:
- allOf:
- - if:
- type: array
- then:
- deprecated: true
- items:
- - minimum: 0
- maximum: 31
- description:
- Emulated PHY ID, choose any but unique to the all
- specified fixed-links
-
- - enum: [0, 1]
- description:
- Duplex configuration. 0 for half duplex or 1 for
- full duplex
-
- - enum: [10, 100, 1000, 2500, 10000]
- description:
- Link speed in Mbits/sec.
-
- - enum: [0, 1]
- description:
- Pause configuration. 0 for no pause, 1 for pause
-
- - enum: [0, 1]
- description:
- Asymmetric pause configuration. 0 for no asymmetric
- pause, 1 for asymmetric pause
-
-
- - if:
- type: object
- then:
- properties:
- speed:
- description:
- Link speed.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [10, 100, 1000, 2500, 10000]
-
- full-duplex:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- Indicates that full-duplex is used. When absent, half
- duplex is assumed.
-
- pause:
- $ref: /schemas/types.yaml#definitions/flag
- description:
- Indicates that pause should be enabled.
-
- asym-pause:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- Indicates that asym_pause should be enabled.
-
- link-gpios:
- maxItems: 1
- description:
- GPIO to determine if the link is up
-
- required:
- - speed
+ oneOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ deprecated: true
+ items:
+ - minimum: 0
+ maximum: 31
+ description:
+ Emulated PHY ID, choose any but unique to the all
+ specified fixed-links
+
+ - enum: [0, 1]
+ description:
+ Duplex configuration. 0 for half duplex or 1 for
+ full duplex
+
+ - enum: [10, 100, 1000, 2500, 10000]
+ description:
+ Link speed in Mbits/sec.
+
+ - enum: [0, 1]
+ description:
+ Pause configuration. 0 for no pause, 1 for pause
+
+ - enum: [0, 1]
+ description:
+ Asymmetric pause configuration. 0 for no asymmetric
+ pause, 1 for asymmetric pause
+ - type: object
+ additionalProperties: false
+ properties:
+ speed:
+ description:
+ Link speed.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [10, 100, 1000, 2500, 10000]
+
+ full-duplex:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Indicates that full-duplex is used. When absent, half
+ duplex is assumed.
+
+ pause:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Indicates that pause should be enabled.
+
+ asym-pause:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Indicates that asym_pause should be enabled.
+
+ link-gpios:
+ maxItems: 1
+ description:
+ GPIO to determine if the link is up
+
+ required:
+ - speed
additionalProperties: true
While the if/then schemas mostly work, there's a few issues. The 'allOf' schema will also be true if 'fixed-link' is not an array or object as a false 'if' schema (without an 'else') will be true. In the array case doesn't set the type (uint32-array) in the 'then' clause. In the node case, 'additionalProperties' is missing. Rework the schema to use oneOf with each possible type. Signed-off-by: Rob Herring <robh@kernel.org> --- .../bindings/net/ethernet-controller.yaml | 123 +++++++++--------- 1 file changed, 59 insertions(+), 64 deletions(-)