| Message ID | 1657544224-10680-1-git-send-email-quic_vpolimer@quicinc.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add PSR support for eDP | expand |
Hi, On Mon, Jul 11, 2022 at 5:57 AM Vinod Polimera <quic_vpolimer@quicinc.com> wrote: > > Changes in v2: > - Use dp bridge to set psr entry/exit instead of dpu_enocder. > - Don't modify whitespaces. > - Set self refresh aware from atomic_check. > - Set self refresh aware only if psr is supported. > - Provide a stub for msm_dp_display_set_psr. > - Move dp functions to bridge code. > > Changes in v3: > - Change callback names to reflect atomic interfaces. > - Move bridge callback change to separate patch as suggested by Dmitry. > - Remove psr function declaration from msm_drv.h. > - Set self_refresh_aware flag only if psr is supported. > - Modify the variable names to simpler form. > - Define bit fields for PSR settings. > - Add comments explaining the steps to enter/exit psr. > - Change DRM_INFO to drm_dbg_db. > > Changes in v4: > - Move the get crtc functions to drm_atomic. > - Add atomic functions for DP bridge too. > - Add ternary operator to choose eDP or DP ops. > - Return true/false instead of 1/0. > - mode_valid missing in the eDP bridge ops. > - Move the functions to get crtc into drm_atomic.c. > - Fix compilation issues. > - Remove dpu_assign_crtc and get crtc from drm_enc instead of dpu_enc. > - Check for crtc state enable while reserving resources. > > Changes in v5: > - Move the mode_valid changes into a different patch. > - Complete psr_op_comp only when isr is set. > - Move the DP atomic callback changes to a different patch. > - Get crtc from drm connector state crtc. > - Move to separate patch for check for crtc state enable while > reserving resources. > > Changes in v6: > - Remove crtc from dpu_encoder_virt struct. > - fix crtc check during vblank toggle crtc. > - Misc changes. > > Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> > Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com> > Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> > > Vinod Polimera (10): > drm/msm/disp/dpu: clear dpu_assign_crtc and get crtc from connector > state instead of dpu_enc > drm: add helper functions to retrieve old and new crtc > drm/msm/dp: use atomic callbacks for DP bridge ops > drm/msm/dp: Add basic PSR support for eDP > drm/msm/dp: use the eDP bridge ops to validate eDP modes > drm/bridge: use atomic enable/disable callbacks for panel bridge > drm/bridge: add psr support for panel bridge callbacks > drm/msm/disp/dpu: use atomic enable/disable callbacks for encoder > functions > drm/msm/disp/dpu: add PSR support for eDP interface in dpu driver > drm/msm/disp/dpu: check for crtc enable rather than crtc active to > release shared resources > > drivers/gpu/drm/bridge/panel.c | 68 ++++++++-- > drivers/gpu/drm/drm_atomic.c | 60 +++++++++ > drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 17 ++- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 56 +++++---- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 8 -- > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 +- > drivers/gpu/drm/msm/dp/dp_catalog.c | 81 ++++++++++++ > drivers/gpu/drm/msm/dp/dp_catalog.h | 4 + > drivers/gpu/drm/msm/dp/dp_ctrl.c | 73 +++++++++++ > drivers/gpu/drm/msm/dp/dp_ctrl.h | 3 + > drivers/gpu/drm/msm/dp/dp_display.c | 31 +++-- > drivers/gpu/drm/msm/dp/dp_display.h | 2 + > drivers/gpu/drm/msm/dp/dp_drm.c | 184 ++++++++++++++++++++++++++-- > drivers/gpu/drm/msm/dp/dp_drm.h | 9 +- > drivers/gpu/drm/msm/dp/dp_link.c | 36 ++++++ > drivers/gpu/drm/msm/dp/dp_panel.c | 22 ++++ > drivers/gpu/drm/msm/dp/dp_panel.h | 6 + > drivers/gpu/drm/msm/dp/dp_reg.h | 27 ++++ > include/drm/drm_atomic.h | 7 ++ > 19 files changed, 631 insertions(+), 65 deletions(-) I spent some time looking at the first few patches. I can try to look at more later this week, though (as you've noticed) many of my reviews are more nit-picks because I don't really have experience with PSR and my overall knowledge of the Qualcomm DP driver is pretty weak. I tried to at least pick to give a Tested-by, but when I did that it didn't work flawlessly. I picked this series to the chromeos-5.15 tree, which is pretty close to mainline right now. I left it sitting at a screen with a blinking cursor which pretty much means it's always transitioning into and out of PSR. I've seen several glitches on the screen with the series applied. :( No idea what's wrong--that's just me black-box testing. I did try to add debug printouts to see if we were hitting "PSR_UPDATE_ERROR_INT | PSR_WAKE_ERROR_INT" but I didn't see my printouts... FWIW: I'm running with KASAN enabled which could affect timings... Glitches happen every few minutes or so for me and so far I haven't see any glitches without KASAN, but that could just be chance... -Doug
On Fri, 29 Jul 2022 at 02:22, Doug Anderson <dianders@chromium.org> wrote: > > Hi, > > On Mon, Jul 11, 2022 at 5:57 AM Vinod Polimera > <quic_vpolimer@quicinc.com> wrote: > > > > Changes in v2: > > - Use dp bridge to set psr entry/exit instead of dpu_enocder. > > - Don't modify whitespaces. > > - Set self refresh aware from atomic_check. > > - Set self refresh aware only if psr is supported. > > - Provide a stub for msm_dp_display_set_psr. > > - Move dp functions to bridge code. > > > > Changes in v3: > > - Change callback names to reflect atomic interfaces. > > - Move bridge callback change to separate patch as suggested by Dmitry. > > - Remove psr function declaration from msm_drv.h. > > - Set self_refresh_aware flag only if psr is supported. > > - Modify the variable names to simpler form. > > - Define bit fields for PSR settings. > > - Add comments explaining the steps to enter/exit psr. > > - Change DRM_INFO to drm_dbg_db. > > > > Changes in v4: > > - Move the get crtc functions to drm_atomic. > > - Add atomic functions for DP bridge too. > > - Add ternary operator to choose eDP or DP ops. > > - Return true/false instead of 1/0. > > - mode_valid missing in the eDP bridge ops. > > - Move the functions to get crtc into drm_atomic.c. > > - Fix compilation issues. > > - Remove dpu_assign_crtc and get crtc from drm_enc instead of dpu_enc. > > - Check for crtc state enable while reserving resources. > > > > Changes in v5: > > - Move the mode_valid changes into a different patch. > > - Complete psr_op_comp only when isr is set. > > - Move the DP atomic callback changes to a different patch. > > - Get crtc from drm connector state crtc. > > - Move to separate patch for check for crtc state enable while > > reserving resources. > > > > Changes in v6: > > - Remove crtc from dpu_encoder_virt struct. > > - fix crtc check during vblank toggle crtc. > > - Misc changes. > > > > Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> > > Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com> > > Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> > > > > Vinod Polimera (10): > > drm/msm/disp/dpu: clear dpu_assign_crtc and get crtc from connector > > state instead of dpu_enc > > drm: add helper functions to retrieve old and new crtc > > drm/msm/dp: use atomic callbacks for DP bridge ops > > drm/msm/dp: Add basic PSR support for eDP > > drm/msm/dp: use the eDP bridge ops to validate eDP modes > > drm/bridge: use atomic enable/disable callbacks for panel bridge > > drm/bridge: add psr support for panel bridge callbacks > > drm/msm/disp/dpu: use atomic enable/disable callbacks for encoder > > functions > > drm/msm/disp/dpu: add PSR support for eDP interface in dpu driver > > drm/msm/disp/dpu: check for crtc enable rather than crtc active to > > release shared resources > > > > drivers/gpu/drm/bridge/panel.c | 68 ++++++++-- > > drivers/gpu/drm/drm_atomic.c | 60 +++++++++ > > drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 17 ++- > > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 56 +++++---- > > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 8 -- > > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 +- > > drivers/gpu/drm/msm/dp/dp_catalog.c | 81 ++++++++++++ > > drivers/gpu/drm/msm/dp/dp_catalog.h | 4 + > > drivers/gpu/drm/msm/dp/dp_ctrl.c | 73 +++++++++++ > > drivers/gpu/drm/msm/dp/dp_ctrl.h | 3 + > > drivers/gpu/drm/msm/dp/dp_display.c | 31 +++-- > > drivers/gpu/drm/msm/dp/dp_display.h | 2 + > > drivers/gpu/drm/msm/dp/dp_drm.c | 184 ++++++++++++++++++++++++++-- > > drivers/gpu/drm/msm/dp/dp_drm.h | 9 +- > > drivers/gpu/drm/msm/dp/dp_link.c | 36 ++++++ > > drivers/gpu/drm/msm/dp/dp_panel.c | 22 ++++ > > drivers/gpu/drm/msm/dp/dp_panel.h | 6 + > > drivers/gpu/drm/msm/dp/dp_reg.h | 27 ++++ > > include/drm/drm_atomic.h | 7 ++ > > 19 files changed, 631 insertions(+), 65 deletions(-) > Which tree does this series apply to?
Hi, On Thu, Aug 4, 2022 at 9:21 AM Robert Foss <robert.foss@linaro.org> wrote: > > On Fri, 29 Jul 2022 at 02:22, Doug Anderson <dianders@chromium.org> wrote: > > > > Hi, > > > > On Mon, Jul 11, 2022 at 5:57 AM Vinod Polimera > > <quic_vpolimer@quicinc.com> wrote: > > > > > > Changes in v2: > > > - Use dp bridge to set psr entry/exit instead of dpu_enocder. > > > - Don't modify whitespaces. > > > - Set self refresh aware from atomic_check. > > > - Set self refresh aware only if psr is supported. > > > - Provide a stub for msm_dp_display_set_psr. > > > - Move dp functions to bridge code. > > > > > > Changes in v3: > > > - Change callback names to reflect atomic interfaces. > > > - Move bridge callback change to separate patch as suggested by Dmitry. > > > - Remove psr function declaration from msm_drv.h. > > > - Set self_refresh_aware flag only if psr is supported. > > > - Modify the variable names to simpler form. > > > - Define bit fields for PSR settings. > > > - Add comments explaining the steps to enter/exit psr. > > > - Change DRM_INFO to drm_dbg_db. > > > > > > Changes in v4: > > > - Move the get crtc functions to drm_atomic. > > > - Add atomic functions for DP bridge too. > > > - Add ternary operator to choose eDP or DP ops. > > > - Return true/false instead of 1/0. > > > - mode_valid missing in the eDP bridge ops. > > > - Move the functions to get crtc into drm_atomic.c. > > > - Fix compilation issues. > > > - Remove dpu_assign_crtc and get crtc from drm_enc instead of dpu_enc. > > > - Check for crtc state enable while reserving resources. > > > > > > Changes in v5: > > > - Move the mode_valid changes into a different patch. > > > - Complete psr_op_comp only when isr is set. > > > - Move the DP atomic callback changes to a different patch. > > > - Get crtc from drm connector state crtc. > > > - Move to separate patch for check for crtc state enable while > > > reserving resources. > > > > > > Changes in v6: > > > - Remove crtc from dpu_encoder_virt struct. > > > - fix crtc check during vblank toggle crtc. > > > - Misc changes. > > > > > > Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> > > > Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com> > > > Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> > > > > > > Vinod Polimera (10): > > > drm/msm/disp/dpu: clear dpu_assign_crtc and get crtc from connector > > > state instead of dpu_enc > > > drm: add helper functions to retrieve old and new crtc > > > drm/msm/dp: use atomic callbacks for DP bridge ops > > > drm/msm/dp: Add basic PSR support for eDP > > > drm/msm/dp: use the eDP bridge ops to validate eDP modes > > > drm/bridge: use atomic enable/disable callbacks for panel bridge > > > drm/bridge: add psr support for panel bridge callbacks > > > drm/msm/disp/dpu: use atomic enable/disable callbacks for encoder > > > functions > > > drm/msm/disp/dpu: add PSR support for eDP interface in dpu driver > > > drm/msm/disp/dpu: check for crtc enable rather than crtc active to > > > release shared resources > > > > > > drivers/gpu/drm/bridge/panel.c | 68 ++++++++-- > > > drivers/gpu/drm/drm_atomic.c | 60 +++++++++ > > > drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 17 ++- > > > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 56 +++++---- > > > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 8 -- > > > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 +- > > > drivers/gpu/drm/msm/dp/dp_catalog.c | 81 ++++++++++++ > > > drivers/gpu/drm/msm/dp/dp_catalog.h | 4 + > > > drivers/gpu/drm/msm/dp/dp_ctrl.c | 73 +++++++++++ > > > drivers/gpu/drm/msm/dp/dp_ctrl.h | 3 + > > > drivers/gpu/drm/msm/dp/dp_display.c | 31 +++-- > > > drivers/gpu/drm/msm/dp/dp_display.h | 2 + > > > drivers/gpu/drm/msm/dp/dp_drm.c | 184 ++++++++++++++++++++++++++-- > > > drivers/gpu/drm/msm/dp/dp_drm.h | 9 +- > > > drivers/gpu/drm/msm/dp/dp_link.c | 36 ++++++ > > > drivers/gpu/drm/msm/dp/dp_panel.c | 22 ++++ > > > drivers/gpu/drm/msm/dp/dp_panel.h | 6 + > > > drivers/gpu/drm/msm/dp/dp_reg.h | 27 ++++ > > > include/drm/drm_atomic.h | 7 ++ > > > 19 files changed, 631 insertions(+), 65 deletions(-) > > > > Which tree does this series apply to? It ought to apply to msm-next, but as I mentioned in my reply to patch #1 it doesn't apply to the top of msm-next. I think I also had to manually apply a few of the later patches with "patch -p1". -Doug