[net-next,3/6] net: atm: remove support for ZeitNet ZN122x ATM devices

Message ID	20220426175436.417283-4-kuba@kernel.org (mailing list archive)
State	Handled Elsewhere
Headers	show Return-Path: <linux-mips-owner@kernel.org> From: Jakub Kicinski <kuba@kernel.org> To: davem@davemloft.net, pabeni@redhat.com Cc: netdev@vger.kernel.org, Jakub Kicinski <kuba@kernel.org>, Chas Williams <3chas3@gmail.com>, linux-atm-general@lists.sourceforge.net, Thomas Bogendoerfer <tsbogend@alpha.franken.de>, linux-mips@vger.kernel.org, arnd@arndb.de Subject: [PATCH net-next 3/6] net: atm: remove support for ZeitNet ZN122x ATM devices Date: Tue, 26 Apr 2022 10:54:33 -0700 Message-Id: <20220426175436.417283-4-kuba@kernel.org> In-Reply-To: <20220426175436.417283-1-kuba@kernel.org> References: <20220426175436.417283-1-kuba@kernel.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	[net-next,1/6] net: atm: remove support for Fujitsu FireStream ATM devices \| expand [net-next,1/6] net: atm: remove support for Fujitsu FireStream ATM devices [net-next,3/6] net: atm: remove support for ZeitNet ZN122x ATM devices

diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig index 7ed202db9ef0..d82f4ebf687f 100644 --- a/arch/mips/configs/gpr_defconfig +++ b/arch/mips/configs/gpr_defconfig @@ -178,7 +178,6 @@ CONFIG_NETCONSOLE=m CONFIG_ATM_TCP=m CONFIG_ATM_LANAI=m CONFIG_ATM_ENI=m -CONFIG_ATM_ZATM=m CONFIG_ATM_NICSTAR=m CONFIG_ATM_IDT77252=m CONFIG_ATM_IA=m diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index f46ad2e294fa..0cb4d9aa14d1 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -255,7 +255,6 @@ CONFIG_ARCNET_COM20020_CS=m CONFIG_ATM_TCP=m CONFIG_ATM_LANAI=m CONFIG_ATM_ENI=m -CONFIG_ATM_ZATM=m CONFIG_ATM_NICSTAR=m CONFIG_ATM_IDT77252=m CONFIG_ATM_IA=m diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig index 9c778308722a..63cdb46a3439 100644 --- a/drivers/atm/Kconfig +++ b/drivers/atm/Kconfig @@ -146,26 +146,6 @@ config ATM_ENI_BURST_RX_2W try this if you have disabled 4W and 8W bursts. Enabling 2W if 4W or 8W are also set may or may not improve throughput. -config ATM_ZATM - tristate "ZeitNet ZN1221/ZN1225" - depends on PCI && VIRT_TO_BUS - help - Driver for the ZeitNet ZN1221 (MMF) and ZN1225 (UTP-5) 155 Mbps ATM - adapters. - - To compile this driver as a module, choose M here: the module will - be called zatm. - -config ATM_ZATM_DEBUG - bool "Enable extended debugging" - depends on ATM_ZATM - help - Extended debugging records various events and displays that list - when an inconsistency is detected. This mechanism is faster than - generally using printks, but still has some impact on performance. - Note that extended debugging may create certain race conditions - itself. Enable this ONLY if you suspect problems with the driver. - config ATM_NICSTAR tristate "IDT 77201 (NICStAR) (ForeRunnerLE)" depends on PCI diff --git a/drivers/atm/Makefile b/drivers/atm/Makefile index 1b6a8ddaf007..c9eade92019b 100644 --- a/drivers/atm/Makefile +++ b/drivers/atm/Makefile @@ -5,7 +5,6 @@ fore_200e-y := fore200e.o -obj-$(CONFIG_ATM_ZATM) += zatm.o uPD98402.o obj-$(CONFIG_ATM_NICSTAR) += nicstar.o obj-$(CONFIG_ATM_IA) += iphase.o suni.o obj-$(CONFIG_ATM_FORE200E) += fore_200e.o diff --git a/drivers/atm/uPD98401.h b/drivers/atm/uPD98401.h deleted file mode 100644 index f766a5ef0c5d..000000000000 --- a/drivers/atm/uPD98401.h +++ /dev/null @@ -1,293 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* drivers/atm/uPD98401.h - NEC uPD98401 (SAR) declarations */ - -/* Written 1995 by Werner Almesberger, EPFL LRC */ - - -#ifndef DRIVERS_ATM_uPD98401_H -#define DRIVERS_ATM_uPD98401_H - - -#define MAX_CRAM_SIZE (1 << 18) /* 2^18 words */ -#define RAM_INCREMENT 1024 /* check in 4 kB increments */ - -#define uPD98401_PORTS 0x24 /* probably more ? */ - - -/* - * Commands - */ - -#define uPD98401_OPEN_CHAN 0x20000000 /* open channel */ -#define uPD98401_CHAN_ADDR 0x0003fff8 /* channel address */ -#define uPD98401_CHAN_ADDR_SHIFT 3 -#define uPD98401_CLOSE_CHAN 0x24000000 /* close channel */ -#define uPD98401_CHAN_RT 0x02000000 /* RX/TX (0 TX, 1 RX) */ -#define uPD98401_DEACT_CHAN 0x28000000 /* deactivate channel */ -#define uPD98401_TX_READY 0x30000000 /* TX ready */ -#define uPD98401_ADD_BAT 0x34000000 /* add batches */ -#define uPD98401_POOL 0x000f0000 /* pool number */ -#define uPD98401_POOL_SHIFT 16 -#define uPD98401_POOL_NUMBAT 0x0000ffff /* number of batches */ -#define uPD98401_NOP 0x3f000000 /* NOP */ -#define uPD98401_IND_ACC 0x00000000 /* Indirect Access */ -#define uPD98401_IA_RW 0x10000000 /* Read/Write (0 W, 1 R) */ -#define uPD98401_IA_B3 0x08000000 /* Byte select, 1 enable */ -#define uPD98401_IA_B2 0x04000000 -#define uPD98401_IA_B1 0x02000000 -#define uPD98401_IA_B0 0x01000000 -#define uPD98401_IA_BALL 0x0f000000 /* whole longword */ -#define uPD98401_IA_TGT 0x000c0000 /* Target */ -#define uPD98401_IA_TGT_SHIFT 18 -#define uPD98401_IA_TGT_CM 0 /* - Control Memory */ -#define uPD98401_IA_TGT_SAR 1 /* - uPD98401 registers */ -#define uPD98401_IA_TGT_PHY 3 /* - PHY device */ -#define uPD98401_IA_ADDR 0x0003ffff - -/* - * Command Register Status - */ - -#define uPD98401_BUSY 0x80000000 /* SAR is busy */ -#define uPD98401_LOCKED 0x40000000 /* SAR is locked by other CPU */ - -/* - * Indications - */ - -/* Normal (AAL5) Receive Indication */ -#define uPD98401_AAL5_UINFO 0xffff0000 /* user-supplied information */ -#define uPD98401_AAL5_UINFO_SHIFT 16 -#define uPD98401_AAL5_SIZE 0x0000ffff /* PDU size (in _CELLS_ !!) */ -#define uPD98401_AAL5_CHAN 0x7fff0000 /* Channel number */ -#define uPD98401_AAL5_CHAN_SHIFT 16 -#define uPD98401_AAL5_ERR 0x00008000 /* Error indication */ -#define uPD98401_AAL5_CI 0x00004000 /* Congestion Indication */ -#define uPD98401_AAL5_CLP 0x00002000 /* CLP (>= 1 cell had CLP=1) */ -#define uPD98401_AAL5_ES 0x00000f00 /* Error Status */ -#define uPD98401_AAL5_ES_SHIFT 8 -#define uPD98401_AAL5_ES_NONE 0 /* No error */ -#define uPD98401_AAL5_ES_FREE 1 /* Receiver free buf underflow */ -#define uPD98401_AAL5_ES_FIFO 2 /* Receiver FIFO overrun */ -#define uPD98401_AAL5_ES_TOOBIG 3 /* Maximum length violation */ -#define uPD98401_AAL5_ES_CRC 4 /* CRC error */ -#define uPD98401_AAL5_ES_ABORT 5 /* User abort */ -#define uPD98401_AAL5_ES_LENGTH 6 /* Length violation */ -#define uPD98401_AAL5_ES_T1 7 /* T1 error (timeout) */ -#define uPD98401_AAL5_ES_DEACT 8 /* Deactivated with DEACT_CHAN */ -#define uPD98401_AAL5_POOL 0x0000001f /* Free buffer pool number */ - -/* Raw Cell Indication */ -#define uPD98401_RAW_UINFO uPD98401_AAL5_UINFO -#define uPD98401_RAW_UINFO_SHIFT uPD98401_AAL5_UINFO_SHIFT -#define uPD98401_RAW_HEC 0x000000ff /* HEC */ -#define uPD98401_RAW_CHAN uPD98401_AAL5_CHAN -#define uPD98401_RAW_CHAN_SHIFT uPD98401_AAL5_CHAN_SHIFT - -/* Transmit Indication */ -#define uPD98401_TXI_CONN 0x7fff0000 /* Connection Number */ -#define uPD98401_TXI_CONN_SHIFT 16 -#define uPD98401_TXI_ACTIVE 0x00008000 /* Channel remains active */ -#define uPD98401_TXI_PQP 0x00007fff /* Packet Queue Pointer */ - -/* - * Directly Addressable Registers - */ - -#define uPD98401_GMR 0x00 /* General Mode Register */ -#define uPD98401_GSR 0x01 /* General Status Register */ -#define uPD98401_IMR 0x02 /* Interrupt Mask Register */ -#define uPD98401_RQU 0x03 /* Receive Queue Underrun */ -#define uPD98401_RQA 0x04 /* Receive Queue Alert */ -#define uPD98401_ADDR 0x05 /* Last Burst Address */ -#define uPD98401_VER 0x06 /* Version Number */ -#define uPD98401_SWR 0x07 /* Software Reset */ -#define uPD98401_CMR 0x08 /* Command Register */ -#define uPD98401_CMR_L 0x09 /* Command Register and Lock/Unlock */ -#define uPD98401_CER 0x0a /* Command Extension Register */ -#define uPD98401_CER_L 0x0b /* Command Ext Reg and Lock/Unlock */ - -#define uPD98401_MSH(n) (0x10+(n)) /* Mailbox n Start Address High */ -#define uPD98401_MSL(n) (0x14+(n)) /* Mailbox n Start Address High */ -#define uPD98401_MBA(n) (0x18+(n)) /* Mailbox n Bottom Address */ -#define uPD98401_MTA(n) (0x1c+(n)) /* Mailbox n Tail Address */ -#define uPD98401_MWA(n) (0x20+(n)) /* Mailbox n Write Address */ - -/* GMR is at 0x00 */ -#define uPD98401_GMR_ONE 0x80000000 /* Must be set to one */ -#define uPD98401_GMR_SLM 0x40000000 /* Address mode (0 word, 1 byte) */ -#define uPD98401_GMR_CPE 0x00008000 /* Control Memory Parity Enable */ -#define uPD98401_GMR_LP 0x00004000 /* Loopback */ -#define uPD98401_GMR_WA 0x00002000 /* Early Bus Write Abort/RDY */ -#define uPD98401_GMR_RA 0x00001000 /* Early Read Abort/RDY */ -#define uPD98401_GMR_SZ 0x00000f00 /* Burst Size Enable */ -#define uPD98401_BURST16 0x00000800 /* 16-word burst */ -#define uPD98401_BURST8 0x00000400 /* 8-word burst */ -#define uPD98401_BURST4 0x00000200 /* 4-word burst */ -#define uPD98401_BURST2 0x00000100 /* 2-word burst */ -#define uPD98401_GMR_AD 0x00000080 /* Address (burst resolution) Disable */ -#define uPD98401_GMR_BO 0x00000040 /* Byte Order (0 little, 1 big) */ -#define uPD98401_GMR_PM 0x00000020 /* Bus Parity Mode (0 byte, 1 word)*/ -#define uPD98401_GMR_PC 0x00000010 /* Bus Parity Control (0even,1odd) */ -#define uPD98401_GMR_BPE 0x00000008 /* Bus Parity Enable */ -#define uPD98401_GMR_DR 0x00000004 /* Receive Drop Mode (0drop,1don't)*/ -#define uPD98401_GMR_SE 0x00000002 /* Shapers Enable */ -#define uPD98401_GMR_RE 0x00000001 /* Receiver Enable */ - -/* GSR is at 0x01, IMR is at 0x02 */ -#define uPD98401_INT_PI 0x80000000 /* PHY interrupt */ -#define uPD98401_INT_RQA 0x40000000 /* Receive Queue Alert */ -#define uPD98401_INT_RQU 0x20000000 /* Receive Queue Underrun */ -#define uPD98401_INT_RD 0x10000000 /* Receiver Deactivated */ -#define uPD98401_INT_SPE 0x08000000 /* System Parity Error */ -#define uPD98401_INT_CPE 0x04000000 /* Control Memory Parity Error */ -#define uPD98401_INT_SBE 0x02000000 /* System Bus Error */ -#define uPD98401_INT_IND 0x01000000 /* Initialization Done */ -#define uPD98401_INT_RCR 0x0000ff00 /* Raw Cell Received */ -#define uPD98401_INT_RCR_SHIFT 8 -#define uPD98401_INT_MF 0x000000f0 /* Mailbox Full */ -#define uPD98401_INT_MF_SHIFT 4 -#define uPD98401_INT_MM 0x0000000f /* Mailbox Modified */ - -/* VER is at 0x06 */ -#define uPD98401_MAJOR 0x0000ff00 /* Major revision */ -#define uPD98401_MAJOR_SHIFT 8 -#define uPD98401_MINOR 0x000000ff /* Minor revision */ - -/* - * Indirectly Addressable Registers - */ - -#define uPD98401_IM(n) (0x40000+(n)) /* Scheduler n I and M */ -#define uPD98401_X(n) (0x40010+(n)) /* Scheduler n X */ -#define uPD98401_Y(n) (0x40020+(n)) /* Scheduler n Y */ -#define uPD98401_PC(n) (0x40030+(n)) /* Scheduler n P, C, p and c */ -#define uPD98401_PS(n) (0x40040+(n)) /* Scheduler n priority and status */ - -/* IM contents */ -#define uPD98401_IM_I 0xff000000 /* I */ -#define uPD98401_IM_I_SHIFT 24 -#define uPD98401_IM_M 0x00ffffff /* M */ - -/* PC contents */ -#define uPD98401_PC_P 0xff000000 /* P */ -#define uPD98401_PC_P_SHIFT 24 -#define uPD98401_PC_C 0x00ff0000 /* C */ -#define uPD98401_PC_C_SHIFT 16 -#define uPD98401_PC_p 0x0000ff00 /* p */ -#define uPD98401_PC_p_SHIFT 8 -#define uPD98401_PC_c 0x000000ff /* c */ - -/* PS contents */ -#define uPD98401_PS_PRIO 0xf0 /* Priority level (0 high, 15 low) */ -#define uPD98401_PS_PRIO_SHIFT 4 -#define uPD98401_PS_S 0x08 /* Scan - must be 0 (internal) */ -#define uPD98401_PS_R 0x04 /* Round Robin (internal) */ -#define uPD98401_PS_A 0x02 /* Active (internal) */ -#define uPD98401_PS_E 0x01 /* Enabled */ - -#define uPD98401_TOS 0x40100 /* Top of Stack Control Memory Address */ -#define uPD98401_SMA 0x40200 /* Shapers Control Memory Start Address */ -#define uPD98401_PMA 0x40201 /* Receive Pool Control Memory Start Address */ -#define uPD98401_T1R 0x40300 /* T1 Register */ -#define uPD98401_VRR 0x40301 /* VPI/VCI Reduction Register/Recv. Shutdown */ -#define uPD98401_TSR 0x40302 /* Time-Stamp Register */ - -/* VRR is at 0x40301 */ -#define uPD98401_VRR_SDM 0x80000000 /* Shutdown Mode */ -#define uPD98401_VRR_SHIFT 0x000f0000 /* VPI/VCI Shift */ -#define uPD98401_VRR_SHIFT_SHIFT 16 -#define uPD98401_VRR_MASK 0x0000ffff /* VPI/VCI mask */ - -/* - * TX packet descriptor - */ - -#define uPD98401_TXPD_SIZE 16 /* descriptor size (in bytes) */ - -#define uPD98401_TXPD_V 0x80000000 /* Valid bit */ -#define uPD98401_TXPD_DP 0x40000000 /* Descriptor (1) or Pointer (0) */ -#define uPD98401_TXPD_SM 0x20000000 /* Single (1) or Multiple (0) */ -#define uPD98401_TXPD_CLPM 0x18000000 /* CLP mode */ -#define uPD98401_CLPM_0 0 /* 00 CLP = 0 */ -#define uPD98401_CLPM_1 3 /* 11 CLP = 1 */ -#define uPD98401_CLPM_LAST 1 /* 01 CLP unless last cell */ -#define uPD98401_TXPD_CLPM_SHIFT 27 -#define uPD98401_TXPD_PTI 0x07000000 /* PTI pattern */ -#define uPD98401_TXPD_PTI_SHIFT 24 -#define uPD98401_TXPD_GFC 0x00f00000 /* GFC pattern */ -#define uPD98401_TXPD_GFC_SHIFT 20 -#define uPD98401_TXPD_C10 0x00040000 /* insert CRC-10 */ -#define uPD98401_TXPD_AAL5 0x00020000 /* AAL5 processing */ -#define uPD98401_TXPD_MB 0x00010000 /* TX mailbox number */ -#define uPD98401_TXPD_UU 0x0000ff00 /* CPCS-UU */ -#define uPD98401_TXPD_UU_SHIFT 8 -#define uPD98401_TXPD_CPI 0x000000ff /* CPI */ - -/* - * TX buffer descriptor - */ - -#define uPD98401_TXBD_SIZE 8 /* descriptor size (in bytes) */ - -#define uPD98401_TXBD_LAST 0x80000000 /* last buffer in packet */ - -/* - * TX VC table - */ - -/* 1st word has the same structure as in a TX packet descriptor */ -#define uPD98401_TXVC_L 0x80000000 /* last buffer */ -#define uPD98401_TXVC_SHP 0x0f000000 /* shaper number */ -#define uPD98401_TXVC_SHP_SHIFT 24 -#define uPD98401_TXVC_VPI 0x00ff0000 /* VPI */ -#define uPD98401_TXVC_VPI_SHIFT 16 -#define uPD98401_TXVC_VCI 0x0000ffff /* VCI */ -#define uPD98401_TXVC_QRP 6 /* Queue Read Pointer is in word 6 */ - -/* - * RX free buffer pools descriptor - */ - -#define uPD98401_RXFP_ALERT 0x70000000 /* low water mark */ -#define uPD98401_RXFP_ALERT_SHIFT 28 -#define uPD98401_RXFP_BFSZ 0x0f000000 /* buffer size, 64*2^n */ -#define uPD98401_RXFP_BFSZ_SHIFT 24 -#define uPD98401_RXFP_BTSZ 0x00ff0000 /* batch size, n+1 */ -#define uPD98401_RXFP_BTSZ_SHIFT 16 -#define uPD98401_RXFP_REMAIN 0x0000ffff /* remaining batches in pool */ - -/* - * RX VC table - */ - -#define uPD98401_RXVC_BTSZ 0xff000000 /* remaining free buffers in batch */ -#define uPD98401_RXVC_BTSZ_SHIFT 24 -#define uPD98401_RXVC_MB 0x00200000 /* RX mailbox number */ -#define uPD98401_RXVC_POOL 0x001f0000 /* free buffer pool number */ -#define uPD98401_RXVC_POOL_SHIFT 16 -#define uPD98401_RXVC_UINFO 0x0000ffff /* user-supplied information */ -#define uPD98401_RXVC_T1 0xffff0000 /* T1 timestamp */ -#define uPD98401_RXVC_T1_SHIFT 16 -#define uPD98401_RXVC_PR 0x00008000 /* Packet Reception, 1 if busy */ -#define uPD98401_RXVC_DR 0x00004000 /* FIFO Drop */ -#define uPD98401_RXVC_OD 0x00001000 /* Drop OAM cells */ -#define uPD98401_RXVC_AR 0x00000800 /* AAL5 or raw cell; 1 if AAL5 */ -#define uPD98401_RXVC_MAXSEG 0x000007ff /* max number of segments per PDU */ -#define uPD98401_RXVC_REM 0xfffe0000 /* remaining words in curr buffer */ -#define uPD98401_RXVC_REM_SHIFT 17 -#define uPD98401_RXVC_CLP 0x00010000 /* CLP received */ -#define uPD98401_RXVC_BFA 0x00008000 /* Buffer Assigned */ -#define uPD98401_RXVC_BTA 0x00004000 /* Batch Assigned */ -#define uPD98401_RXVC_CI 0x00002000 /* Congestion Indication */ -#define uPD98401_RXVC_DD 0x00001000 /* Dropping incoming cells */ -#define uPD98401_RXVC_DP 0x00000800 /* like PR ? */ -#define uPD98401_RXVC_CURSEG 0x000007ff /* Current Segment count */ - -/* - * RX lookup table - */ - -#define uPD98401_RXLT_ENBL 0x8000 /* Enable */ - -#endif diff --git a/drivers/atm/uPD98402.c b/drivers/atm/uPD98402.c deleted file mode 100644 index 239852d85558..000000000000 --- a/drivers/atm/uPD98402.c +++ /dev/null @@ -1,266 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* drivers/atm/uPD98402.c - NEC uPD98402 (PHY) declarations */ - -/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - - -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/errno.h> -#include <linux/atmdev.h> -#include <linux/sonet.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/uaccess.h> -#include <linux/atomic.h> - -#include "uPD98402.h" - - -#if 0 -#define DPRINTK(format,args...) printk(KERN_DEBUG format,##args) -#else -#define DPRINTK(format,args...) -#endif - - -struct uPD98402_priv { - struct k_sonet_stats sonet_stats;/* link diagnostics */ - unsigned char framing; /* SONET/SDH framing */ - int loop_mode; /* loopback mode */ - spinlock_t lock; -}; - - -#define PRIV(dev) ((struct uPD98402_priv *) dev->phy_data) - -#define PUT(val,reg) dev->ops->phy_put(dev,val,uPD98402_##reg) -#define GET(reg) dev->ops->phy_get(dev,uPD98402_##reg) - - -static int fetch_stats(struct atm_dev *dev,struct sonet_stats __user *arg,int zero) -{ - struct sonet_stats tmp; - int error = 0; - - atomic_add(GET(HECCT),&PRIV(dev)->sonet_stats.uncorr_hcs); - sonet_copy_stats(&PRIV(dev)->sonet_stats,&tmp); - if (arg) error = copy_to_user(arg,&tmp,sizeof(tmp)); - if (zero && !error) { - /* unused fields are reported as -1, but we must not "adjust" - them */ - tmp.corr_hcs = tmp.tx_cells = tmp.rx_cells = 0; - sonet_subtract_stats(&PRIV(dev)->sonet_stats,&tmp); - } - return error ? -EFAULT : 0; -} - - -static int set_framing(struct atm_dev *dev,unsigned char framing) -{ - static const unsigned char sonet[] = { 1,2,3,0 }; - static const unsigned char sdh[] = { 1,0,0,2 }; - const char *set; - unsigned long flags; - - switch (framing) { - case SONET_FRAME_SONET: - set = sonet; - break; - case SONET_FRAME_SDH: - set = sdh; - break; - default: - return -EINVAL; - } - spin_lock_irqsave(&PRIV(dev)->lock, flags); - PUT(set[0],C11T); - PUT(set[1],C12T); - PUT(set[2],C13T); - PUT((GET(MDR) & ~uPD98402_MDR_SS_MASK) | (set[3] << - uPD98402_MDR_SS_SHIFT),MDR); - spin_unlock_irqrestore(&PRIV(dev)->lock, flags); - return 0; -} - - -static int get_sense(struct atm_dev *dev,u8 __user *arg) -{ - unsigned long flags; - unsigned char s[3]; - - spin_lock_irqsave(&PRIV(dev)->lock, flags); - s[0] = GET(C11R); - s[1] = GET(C12R); - s[2] = GET(C13R); - spin_unlock_irqrestore(&PRIV(dev)->lock, flags); - return (put_user(s[0], arg) || put_user(s[1], arg+1) || - put_user(s[2], arg+2) || put_user(0xff, arg+3) || - put_user(0xff, arg+4) || put_user(0xff, arg+5)) ? -EFAULT : 0; -} - - -static int set_loopback(struct atm_dev *dev,int mode) -{ - unsigned char mode_reg; - - mode_reg = GET(MDR) & ~(uPD98402_MDR_TPLP | uPD98402_MDR_ALP | - uPD98402_MDR_RPLP); - switch (__ATM_LM_XTLOC(mode)) { - case __ATM_LM_NONE: - break; - case __ATM_LM_PHY: - mode_reg |= uPD98402_MDR_TPLP; - break; - case __ATM_LM_ATM: - mode_reg |= uPD98402_MDR_ALP; - break; - default: - return -EINVAL; - } - switch (__ATM_LM_XTRMT(mode)) { - case __ATM_LM_NONE: - break; - case __ATM_LM_PHY: - mode_reg |= uPD98402_MDR_RPLP; - break; - default: - return -EINVAL; - } - PUT(mode_reg,MDR); - PRIV(dev)->loop_mode = mode; - return 0; -} - - -static int uPD98402_ioctl(struct atm_dev *dev,unsigned int cmd,void __user *arg) -{ - switch (cmd) { - - case SONET_GETSTATZ: - case SONET_GETSTAT: - return fetch_stats(dev,arg, cmd == SONET_GETSTATZ); - case SONET_SETFRAMING: - return set_framing(dev, (int)(unsigned long)arg); - case SONET_GETFRAMING: - return put_user(PRIV(dev)->framing,(int __user *)arg) ? - -EFAULT : 0; - case SONET_GETFRSENSE: - return get_sense(dev,arg); - case ATM_SETLOOP: - return set_loopback(dev, (int)(unsigned long)arg); - case ATM_GETLOOP: - return put_user(PRIV(dev)->loop_mode,(int __user *)arg) ? - -EFAULT : 0; - case ATM_QUERYLOOP: - return put_user(ATM_LM_LOC_PHY | ATM_LM_LOC_ATM | - ATM_LM_RMT_PHY,(int __user *)arg) ? -EFAULT : 0; - default: - return -ENOIOCTLCMD; - } -} - - -#define ADD_LIMITED(s,v) \ - { atomic_add(GET(v),&PRIV(dev)->sonet_stats.s); \ - if (atomic_read(&PRIV(dev)->sonet_stats.s) < 0) \ - atomic_set(&PRIV(dev)->sonet_stats.s,INT_MAX); } - - -static void stat_event(struct atm_dev *dev) -{ - unsigned char events; - - events = GET(PCR); - if (events & uPD98402_PFM_PFEB) ADD_LIMITED(path_febe,PFECB); - if (events & uPD98402_PFM_LFEB) ADD_LIMITED(line_febe,LECCT); - if (events & uPD98402_PFM_B3E) ADD_LIMITED(path_bip,B3ECT); - if (events & uPD98402_PFM_B2E) ADD_LIMITED(line_bip,B2ECT); - if (events & uPD98402_PFM_B1E) ADD_LIMITED(section_bip,B1ECT); -} - - -#undef ADD_LIMITED - - -static void uPD98402_int(struct atm_dev *dev) -{ - static unsigned long silence = 0; - unsigned char reason; - - while ((reason = GET(PICR))) { - if (reason & uPD98402_INT_LOS) - printk(KERN_NOTICE "%s(itf %d): signal lost\n", - dev->type,dev->number); - if (reason & uPD98402_INT_PFM) stat_event(dev); - if (reason & uPD98402_INT_PCO) { - (void) GET(PCOCR); /* clear interrupt cause */ - atomic_add(GET(HECCT), - &PRIV(dev)->sonet_stats.uncorr_hcs); - } - if ((reason & uPD98402_INT_RFO) && - (time_after(jiffies, silence) || silence == 0)) { - printk(KERN_WARNING "%s(itf %d): uPD98402 receive " - "FIFO overflow\n",dev->type,dev->number); - silence = (jiffies+HZ/2)|1; - } - } -} - - -static int uPD98402_start(struct atm_dev *dev) -{ - DPRINTK("phy_start\n"); - if (!(dev->phy_data = kmalloc(sizeof(struct uPD98402_priv),GFP_KERNEL))) - return -ENOMEM; - spin_lock_init(&PRIV(dev)->lock); - memset(&PRIV(dev)->sonet_stats,0,sizeof(struct k_sonet_stats)); - (void) GET(PCR); /* clear performance events */ - PUT(uPD98402_PFM_FJ,PCMR); /* ignore frequency adj */ - (void) GET(PCOCR); /* clear overflows */ - PUT(~uPD98402_PCO_HECC,PCOMR); - (void) GET(PICR); /* clear interrupts */ - PUT(~(uPD98402_INT_PFM | uPD98402_INT_ALM | uPD98402_INT_RFO | - uPD98402_INT_LOS),PIMR); /* enable them */ - (void) fetch_stats(dev,NULL,1); /* clear kernel counters */ - atomic_set(&PRIV(dev)->sonet_stats.corr_hcs,-1); - atomic_set(&PRIV(dev)->sonet_stats.tx_cells,-1); - atomic_set(&PRIV(dev)->sonet_stats.rx_cells,-1); - return 0; -} - - -static int uPD98402_stop(struct atm_dev *dev) -{ - /* let SAR driver worry about stopping interrupts */ - kfree(PRIV(dev)); - return 0; -} - - -static const struct atmphy_ops uPD98402_ops = { - .start = uPD98402_start, - .ioctl = uPD98402_ioctl, - .interrupt = uPD98402_int, - .stop = uPD98402_stop, -}; - - -int uPD98402_init(struct atm_dev *dev) -{ -DPRINTK("phy_init\n"); - dev->phy = &uPD98402_ops; - return 0; -} - - -MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(uPD98402_init); - -static __init int uPD98402_module_init(void) -{ - return 0; -} -module_init(uPD98402_module_init); -/* module_exit not defined so not unloadable */ diff --git a/drivers/atm/uPD98402.h b/drivers/atm/uPD98402.h deleted file mode 100644 index 437cfaa20c96..000000000000 --- a/drivers/atm/uPD98402.h +++ /dev/null @@ -1,107 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* drivers/atm/uPD98402.h - NEC uPD98402 (PHY) declarations */ - -/* Written 1995 by Werner Almesberger, EPFL LRC */ - - -#ifndef DRIVERS_ATM_uPD98402_H -#define DRIVERS_ATM_uPD98402_H - -/* - * Registers - */ - -#define uPD98402_CMR 0x00 /* Command Register */ -#define uPD98402_MDR 0x01 /* Mode Register */ -#define uPD98402_PICR 0x02 /* PHY Interrupt Cause Register */ -#define uPD98402_PIMR 0x03 /* PHY Interrupt Mask Register */ -#define uPD98402_ACR 0x04 /* Alarm Cause Register */ -#define uPD98402_ACMR 0x05 /* Alarm Cause Mask Register */ -#define uPD98402_PCR 0x06 /* Performance Cause Register */ -#define uPD98402_PCMR 0x07 /* Performance Cause Mask Register */ -#define uPD98402_IACM 0x08 /* Internal Alarm Cause Mask Register */ -#define uPD98402_B1ECT 0x09 /* B1 Error Count Register */ -#define uPD98402_B2ECT 0x0a /* B2 Error Count Register */ -#define uPD98402_B3ECT 0x0b /* B3 Error Count Regster */ -#define uPD98402_PFECB 0x0c /* Path FEBE Count Register */ -#define uPD98402_LECCT 0x0d /* Line FEBE Count Register */ -#define uPD98402_HECCT 0x0e /* HEC Error Count Register */ -#define uPD98402_FJCT 0x0f /* Frequence Justification Count Reg */ -#define uPD98402_PCOCR 0x10 /* Perf. Counter Overflow Cause Reg */ -#define uPD98402_PCOMR 0x11 /* Perf. Counter Overflow Mask Reg */ -#define uPD98402_C11T 0x20 /* C11T Data Register */ -#define uPD98402_C12T 0x21 /* C12T Data Register */ -#define uPD98402_C13T 0x22 /* C13T Data Register */ -#define uPD98402_F1T 0x23 /* F1T Data Register */ -#define uPD98402_K2T 0x25 /* K2T Data Register */ -#define uPD98402_C2T 0x26 /* C2T Data Register */ -#define uPD98402_F2T 0x27 /* F2T Data Register */ -#define uPD98402_C11R 0x30 /* C11T Data Register */ -#define uPD98402_C12R 0x31 /* C12T Data Register */ -#define uPD98402_C13R 0x32 /* C13T Data Register */ -#define uPD98402_F1R 0x33 /* F1T Data Register */ -#define uPD98402_K2R 0x35 /* K2T Data Register */ -#define uPD98402_C2R 0x36 /* C2T Data Register */ -#define uPD98402_F2R 0x37 /* F2T Data Register */ - -/* CMR is at 0x00 */ -#define uPD98402_CMR_PFRF 0x01 /* Send path FERF */ -#define uPD98402_CMR_LFRF 0x02 /* Send line FERF */ -#define uPD98402_CMR_PAIS 0x04 /* Send path AIS */ -#define uPD98402_CMR_LAIS 0x08 /* Send line AIS */ - -/* MDR is at 0x01 */ -#define uPD98402_MDR_ALP 0x01 /* ATM layer loopback */ -#define uPD98402_MDR_TPLP 0x02 /* PMD loopback, to host */ -#define uPD98402_MDR_RPLP 0x04 /* PMD loopback, to network */ -#define uPD98402_MDR_SS0 0x08 /* SS0 */ -#define uPD98402_MDR_SS1 0x10 /* SS1 */ -#define uPD98402_MDR_SS_MASK 0x18 /* mask */ -#define uPD98402_MDR_SS_SHIFT 3 /* shift */ -#define uPD98402_MDR_HEC 0x20 /* disable HEC inbound processing */ -#define uPD98402_MDR_FSR 0x40 /* disable frame scrambler */ -#define uPD98402_MDR_CSR 0x80 /* disable cell scrambler */ - -/* PICR is at 0x02, PIMR is at 0x03 */ -#define uPD98402_INT_PFM 0x01 /* performance counter has changed */ -#define uPD98402_INT_ALM 0x02 /* line fault */ -#define uPD98402_INT_RFO 0x04 /* receive FIFO overflow */ -#define uPD98402_INT_PCO 0x08 /* performance counter overflow */ -#define uPD98402_INT_OTD 0x20 /* OTD has occurred */ -#define uPD98402_INT_LOS 0x40 /* Loss Of Signal */ -#define uPD98402_INT_LOF 0x80 /* Loss Of Frame */ - -/* ACR is as 0x04, ACMR is at 0x05 */ -#define uPD98402_ALM_PFRF 0x01 /* path FERF */ -#define uPD98402_ALM_LFRF 0x02 /* line FERF */ -#define uPD98402_ALM_PAIS 0x04 /* path AIS */ -#define uPD98402_ALM_LAIS 0x08 /* line AIS */ -#define uPD98402_ALM_LOD 0x10 /* loss of delineation */ -#define uPD98402_ALM_LOP 0x20 /* loss of pointer */ -#define uPD98402_ALM_OOF 0x40 /* out of frame */ - -/* PCR is at 0x06, PCMR is at 0x07 */ -#define uPD98402_PFM_PFEB 0x01 /* path FEBE */ -#define uPD98402_PFM_LFEB 0x02 /* line FEBE */ -#define uPD98402_PFM_B3E 0x04 /* B3 error */ -#define uPD98402_PFM_B2E 0x08 /* B2 error */ -#define uPD98402_PFM_B1E 0x10 /* B1 error */ -#define uPD98402_PFM_FJ 0x20 /* frequency justification */ - -/* IACM is at 0x08 */ -#define uPD98402_IACM_PFRF 0x01 /* don't generate path FERF */ -#define uPD98402_IACM_LFRF 0x02 /* don't generate line FERF */ - -/* PCOCR is at 0x010, PCOMR is at 0x11 */ -#define uPD98402_PCO_B1EC 0x01 /* B1ECT overflow */ -#define uPD98402_PCO_B2EC 0x02 /* B2ECT overflow */ -#define uPD98402_PCO_B3EC 0x04 /* B3ECT overflow */ -#define uPD98402_PCO_PFBC 0x08 /* PFEBC overflow */ -#define uPD98402_PCO_LFBC 0x10 /* LFEVC overflow */ -#define uPD98402_PCO_HECC 0x20 /* HECCT overflow */ -#define uPD98402_PCO_FJC 0x40 /* FJCT overflow */ - - -int uPD98402_init(struct atm_dev *dev); - -#endif diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c deleted file mode 100644 index cf5fffcf98a1..000000000000 --- a/drivers/atm/zatm.c +++ /dev/null @@ -1,1652 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* drivers/atm/zatm.c - ZeitNet ZN122x device driver */ - -/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/pci.h> -#include <linux/errno.h> -#include <linux/atm.h> -#include <linux/atmdev.h> -#include <linux/sonet.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/delay.h> -#include <linux/uio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/dma-mapping.h> -#include <linux/atm_zatm.h> -#include <linux/capability.h> -#include <linux/bitops.h> -#include <linux/wait.h> -#include <linux/slab.h> -#include <asm/byteorder.h> -#include <asm/string.h> -#include <asm/io.h> -#include <linux/atomic.h> -#include <linux/uaccess.h> -#include <linux/nospec.h> - -#include "uPD98401.h" -#include "uPD98402.h" -#include "zeprom.h" -#include "zatm.h" - - -/* - * TODO: - * - * Minor features - * - support 64 kB SDUs (will have to use multibuffer batches then :-( ) - * - proper use of CDV, credit = max(1,CDVT*PCR) - * - AAL0 - * - better receive timestamps - * - OAM - */ - -#define ZATM_COPPER 1 - -#if 0 -#define DPRINTK(format,args...) printk(KERN_DEBUG format,##args) -#else -#define DPRINTK(format,args...) -#endif - -#ifndef CONFIG_ATM_ZATM_DEBUG - - -#define NULLCHECK(x) - -#define EVENT(s,a,b) - - -static void event_dump(void) -{ -} - - -#else - - -/* - * NULL pointer checking - */ - -#define NULLCHECK(x) \ - if ((unsigned long) (x) < 0x30) printk(KERN_CRIT #x "==0x%x\n", (int) (x)) - -/* - * Very extensive activity logging. Greatly improves bug detection speed but - * costs a few Mbps if enabled. - */ - -#define EV 64 - -static const char *ev[EV]; -static unsigned long ev_a[EV],ev_b[EV]; -static int ec = 0; - - -static void EVENT(const char *s,unsigned long a,unsigned long b) -{ - ev[ec] = s; - ev_a[ec] = a; - ev_b[ec] = b; - ec = (ec+1) % EV; -} - - -static void event_dump(void) -{ - int n,i; - - printk(KERN_NOTICE "----- event dump follows -----\n"); - for (n = 0; n < EV; n++) { - i = (ec+n) % EV; - printk(KERN_NOTICE); - printk(ev[i] ? ev[i] : "(null)",ev_a[i],ev_b[i]); - } - printk(KERN_NOTICE "----- event dump ends here -----\n"); -} - - -#endif /* CONFIG_ATM_ZATM_DEBUG */ - - -#define RING_BUSY 1 /* indication from do_tx that PDU has to be - backlogged */ - -static struct atm_dev *zatm_boards = NULL; -static unsigned long dummy[2] = {0,0}; - - -#define zin_n(r) inl(zatm_dev->base+r*4) -#define zin(r) inl(zatm_dev->base+uPD98401_##r*4) -#define zout(v,r) outl(v,zatm_dev->base+uPD98401_##r*4) -#define zwait() do {} while (zin(CMR) & uPD98401_BUSY) - -/* RX0, RX1, TX0, TX1 */ -static const int mbx_entries[NR_MBX] = { 1024,1024,1024,1024 }; -static const int mbx_esize[NR_MBX] = { 16,16,4,4 }; /* entry size in bytes */ - -#define MBX_SIZE(i) (mbx_entries[i]*mbx_esize[i]) - - -/*-------------------------------- utilities --------------------------------*/ - - -static void zpokel(struct zatm_dev *zatm_dev,u32 value,u32 addr) -{ - zwait(); - zout(value,CER); - zout(uPD98401_IND_ACC | uPD98401_IA_BALL | - (uPD98401_IA_TGT_CM << uPD98401_IA_TGT_SHIFT) | addr,CMR); -} - - -static u32 zpeekl(struct zatm_dev *zatm_dev,u32 addr) -{ - zwait(); - zout(uPD98401_IND_ACC | uPD98401_IA_BALL | uPD98401_IA_RW | - (uPD98401_IA_TGT_CM << uPD98401_IA_TGT_SHIFT) | addr,CMR); - zwait(); - return zin(CER); -} - - -/*------------------------------- free lists --------------------------------*/ - - -/* - * Free buffer head structure: - * [0] pointer to buffer (for SAR) - * [1] buffer descr link pointer (for SAR) - * [2] back pointer to skb (for poll_rx) - * [3] data - * ... - */ - -struct rx_buffer_head { - u32 buffer; /* pointer to buffer (for SAR) */ - u32 link; /* buffer descriptor link pointer (for SAR) */ - struct sk_buff *skb; /* back pointer to skb (for poll_rx) */ -}; - - -static void refill_pool(struct atm_dev *dev,int pool) -{ - struct zatm_dev *zatm_dev; - struct sk_buff *skb; - struct rx_buffer_head *first; - unsigned long flags; - int align,offset,free,count,size; - - EVENT("refill_pool\n",0,0); - zatm_dev = ZATM_DEV(dev); - size = (64 << (pool <= ZATM_AAL5_POOL_BASE ? 0 : - pool-ZATM_AAL5_POOL_BASE))+sizeof(struct rx_buffer_head); - if (size < PAGE_SIZE) { - align = 32; /* for 32 byte alignment */ - offset = sizeof(struct rx_buffer_head); - } - else { - align = 4096; - offset = zatm_dev->pool_info[pool].offset+ - sizeof(struct rx_buffer_head); - } - size += align; - spin_lock_irqsave(&zatm_dev->lock, flags); - free = zpeekl(zatm_dev,zatm_dev->pool_base+2*pool) & - uPD98401_RXFP_REMAIN; - spin_unlock_irqrestore(&zatm_dev->lock, flags); - if (free >= zatm_dev->pool_info[pool].low_water) return; - EVENT("starting ... POOL: 0x%x, 0x%x\n", - zpeekl(zatm_dev,zatm_dev->pool_base+2*pool), - zpeekl(zatm_dev,zatm_dev->pool_base+2*pool+1)); - EVENT("dummy: 0x%08lx, 0x%08lx\n",dummy[0],dummy[1]); - count = 0; - first = NULL; - while (free < zatm_dev->pool_info[pool].high_water) { - struct rx_buffer_head *head; - - skb = alloc_skb(size,GFP_ATOMIC); - if (!skb) { - printk(KERN_WARNING DEV_LABEL "(Itf %d): got no new " - "skb (%d) with %d free\n",dev->number,size,free); - break; - } - skb_reserve(skb,(unsigned char *) ((((unsigned long) skb->data+ - align+offset-1) & ~(unsigned long) (align-1))-offset)- - skb->data); - head = (struct rx_buffer_head *) skb->data; - skb_reserve(skb,sizeof(struct rx_buffer_head)); - if (!first) first = head; - count++; - head->buffer = virt_to_bus(skb->data); - head->link = 0; - head->skb = skb; - EVENT("enq skb 0x%08lx/0x%08lx\n",(unsigned long) skb, - (unsigned long) head); - spin_lock_irqsave(&zatm_dev->lock, flags); - if (zatm_dev->last_free[pool]) - ((struct rx_buffer_head *) (zatm_dev->last_free[pool]-> - data))[-1].link = virt_to_bus(head); - zatm_dev->last_free[pool] = skb; - skb_queue_tail(&zatm_dev->pool[pool],skb); - spin_unlock_irqrestore(&zatm_dev->lock, flags); - free++; - } - if (first) { - spin_lock_irqsave(&zatm_dev->lock, flags); - zwait(); - zout(virt_to_bus(first),CER); - zout(uPD98401_ADD_BAT | (pool << uPD98401_POOL_SHIFT) | count, - CMR); - spin_unlock_irqrestore(&zatm_dev->lock, flags); - EVENT ("POOL: 0x%x, 0x%x\n", - zpeekl(zatm_dev,zatm_dev->pool_base+2*pool), - zpeekl(zatm_dev,zatm_dev->pool_base+2*pool+1)); - EVENT("dummy: 0x%08lx, 0x%08lx\n",dummy[0],dummy[1]); - } -} - - -static void drain_free(struct atm_dev *dev,int pool) -{ - skb_queue_purge(&ZATM_DEV(dev)->pool[pool]); -} - - -static int pool_index(int max_pdu) -{ - int i; - - if (max_pdu % ATM_CELL_PAYLOAD) - printk(KERN_ERR DEV_LABEL ": driver error in pool_index: " - "max_pdu is %d\n",max_pdu); - if (max_pdu > 65536) return -1; - for (i = 0; (64 << i) < max_pdu; i++); - return i+ZATM_AAL5_POOL_BASE; -} - - -/* use_pool isn't reentrant */ - - -static void use_pool(struct atm_dev *dev,int pool) -{ - struct zatm_dev *zatm_dev; - unsigned long flags; - int size; - - zatm_dev = ZATM_DEV(dev); - if (!(zatm_dev->pool_info[pool].ref_count++)) { - skb_queue_head_init(&zatm_dev->pool[pool]); - size = pool-ZATM_AAL5_POOL_BASE; - if (size < 0) size = 0; /* 64B... */ - else if (size > 10) size = 10; /* ... 64kB */ - spin_lock_irqsave(&zatm_dev->lock, flags); - zpokel(zatm_dev,((zatm_dev->pool_info[pool].low_water/4) << - uPD98401_RXFP_ALERT_SHIFT) | - (1 << uPD98401_RXFP_BTSZ_SHIFT) | - (size << uPD98401_RXFP_BFSZ_SHIFT), - zatm_dev->pool_base+pool*2); - zpokel(zatm_dev,(unsigned long) dummy,zatm_dev->pool_base+ - pool*2+1); - spin_unlock_irqrestore(&zatm_dev->lock, flags); - zatm_dev->last_free[pool] = NULL; - refill_pool(dev,pool); - } - DPRINTK("pool %d: %d\n",pool,zatm_dev->pool_info[pool].ref_count); -} - - -static void unuse_pool(struct atm_dev *dev,int pool) -{ - if (!(--ZATM_DEV(dev)->pool_info[pool].ref_count)) - drain_free(dev,pool); -} - -/*----------------------------------- RX ------------------------------------*/ - - -#if 0 -static void exception(struct atm_vcc *vcc) -{ - static int count = 0; - struct zatm_dev *zatm_dev = ZATM_DEV(vcc->dev); - struct zatm_vcc *zatm_vcc = ZATM_VCC(vcc); - unsigned long *qrp; - int i; - - if (count++ > 2) return; - for (i = 0; i < 8; i++) - printk("TX%d: 0x%08lx\n",i, - zpeekl(zatm_dev,zatm_vcc->tx_chan*VC_SIZE/4+i)); - for (i = 0; i < 5; i++) - printk("SH%d: 0x%08lx\n",i, - zpeekl(zatm_dev,uPD98401_IM(zatm_vcc->shaper)+16*i)); - qrp = (unsigned long *) zpeekl(zatm_dev,zatm_vcc->tx_chan*VC_SIZE/4+ - uPD98401_TXVC_QRP); - printk("qrp=0x%08lx\n",(unsigned long) qrp); - for (i = 0; i < 4; i++) printk("QRP[%d]: 0x%08lx",i,qrp[i]); -} -#endif - - -static const char *err_txt[] = { - "No error", - "RX buf underflow", - "RX FIFO overrun", - "Maximum len violation", - "CRC error", - "User abort", - "Length violation", - "T1 error", - "Deactivated", - "???", - "???", - "???", - "???", - "???", - "???", - "???" -}; - - -static void poll_rx(struct atm_dev *dev,int mbx) -{ - struct zatm_dev *zatm_dev; - unsigned long pos; - u32 x; - int error; - - EVENT("poll_rx\n",0,0); - zatm_dev = ZATM_DEV(dev); - pos = (zatm_dev->mbx_start[mbx] & ~0xffffUL) | zin(MTA(mbx)); - while (x = zin(MWA(mbx)), (pos & 0xffff) != x) { - u32 *here; - struct sk_buff *skb; - struct atm_vcc *vcc; - int cells,size,chan; - - EVENT("MBX: host 0x%lx, nic 0x%x\n",pos,x); - here = (u32 *) pos; - if (((pos += 16) & 0xffff) == zatm_dev->mbx_end[mbx]) - pos = zatm_dev->mbx_start[mbx]; - cells = here[0] & uPD98401_AAL5_SIZE; -#if 0 -printk("RX IND: 0x%x, 0x%x, 0x%x, 0x%x\n",here[0],here[1],here[2],here[3]); -{ -unsigned long *x; - printk("POOL: 0x%08x, 0x%08x\n",zpeekl(zatm_dev, - zatm_dev->pool_base), - zpeekl(zatm_dev,zatm_dev->pool_base+1)); - x = (unsigned long *) here[2]; - printk("[0..3] = 0x%08lx, 0x%08lx, 0x%08lx, 0x%08lx\n", - x[0],x[1],x[2],x[3]); -} -#endif - error = 0; - if (here[3] & uPD98401_AAL5_ERR) { - error = (here[3] & uPD98401_AAL5_ES) >> - uPD98401_AAL5_ES_SHIFT; - if (error == uPD98401_AAL5_ES_DEACT || - error == uPD98401_AAL5_ES_FREE) continue; - } -EVENT("error code 0x%x/0x%x\n",(here[3] & uPD98401_AAL5_ES) >> - uPD98401_AAL5_ES_SHIFT,error); - skb = ((struct rx_buffer_head *) bus_to_virt(here[2]))->skb; - __net_timestamp(skb); -#if 0 -printk("[-3..0] 0x%08lx 0x%08lx 0x%08lx 0x%08lx\n",((unsigned *) skb->data)[-3], - ((unsigned *) skb->data)[-2],((unsigned *) skb->data)[-1], - ((unsigned *) skb->data)[0]); -#endif - EVENT("skb 0x%lx, here 0x%lx\n",(unsigned long) skb, - (unsigned long) here); -#if 0 -printk("dummy: 0x%08lx, 0x%08lx\n",dummy[0],dummy[1]); -#endif - size = error ? 0 : ntohs(((__be16 *) skb->data)[cells* - ATM_CELL_PAYLOAD/sizeof(u16)-3]); - EVENT("got skb 0x%lx, size %d\n",(unsigned long) skb,size); - chan = (here[3] & uPD98401_AAL5_CHAN) >> - uPD98401_AAL5_CHAN_SHIFT; - if (chan < zatm_dev->chans && zatm_dev->rx_map[chan]) { - int pos; - vcc = zatm_dev->rx_map[chan]; - pos = ZATM_VCC(vcc)->pool; - if (skb == zatm_dev->last_free[pos]) - zatm_dev->last_free[pos] = NULL; - skb_unlink(skb, zatm_dev->pool + pos); - } - else { - printk(KERN_ERR DEV_LABEL "(itf %d): RX indication " - "for non-existing channel\n",dev->number); - size = 0; - vcc = NULL; - event_dump(); - } - if (error) { - static unsigned long silence = 0; - static int last_error = 0; - - if (error != last_error || - time_after(jiffies, silence) || silence == 0){ - printk(KERN_WARNING DEV_LABEL "(itf %d): " - "chan %d error %s\n",dev->number,chan, - err_txt[error]); - last_error = error; - silence = (jiffies+2*HZ)|1; - } - size = 0; - } - if (size && (size > cells*ATM_CELL_PAYLOAD-ATM_AAL5_TRAILER || - size <= (cells-1)*ATM_CELL_PAYLOAD-ATM_AAL5_TRAILER)) { - printk(KERN_ERR DEV_LABEL "(itf %d): size %d with %d " - "cells\n",dev->number,size,cells); - size = 0; - event_dump(); - } - if (size > ATM_MAX_AAL5_PDU) { - printk(KERN_ERR DEV_LABEL "(itf %d): size too big " - "(%d)\n",dev->number,size); - size = 0; - event_dump(); - } - if (!size) { - dev_kfree_skb_irq(skb); - if (vcc) atomic_inc(&vcc->stats->rx_err); - continue; - } - if (!atm_charge(vcc,skb->truesize)) { - dev_kfree_skb_irq(skb); - continue; - } - skb->len = size; - ATM_SKB(skb)->vcc = vcc; - vcc->push(vcc,skb); - atomic_inc(&vcc->stats->rx); - } - zout(pos & 0xffff,MTA(mbx)); -#if 0 /* probably a stupid idea */ - refill_pool(dev,zatm_vcc->pool); - /* maybe this saves us a few interrupts */ -#endif -} - - -static int open_rx_first(struct atm_vcc *vcc) -{ - struct zatm_dev *zatm_dev; - struct zatm_vcc *zatm_vcc; - unsigned long flags; - unsigned short chan; - int cells; - - DPRINTK("open_rx_first (0x%x)\n",inb_p(0xc053)); - zatm_dev = ZATM_DEV(vcc->dev); - zatm_vcc = ZATM_VCC(vcc); - zatm_vcc->rx_chan = 0; - if (vcc->qos.rxtp.traffic_class == ATM_NONE) return 0; - if (vcc->qos.aal == ATM_AAL5) { - if (vcc->qos.rxtp.max_sdu > 65464) - vcc->qos.rxtp.max_sdu = 65464; - /* fix this - we may want to receive 64kB SDUs - later */ - cells = DIV_ROUND_UP(vcc->qos.rxtp.max_sdu + ATM_AAL5_TRAILER, - ATM_CELL_PAYLOAD); - zatm_vcc->pool = pool_index(cells*ATM_CELL_PAYLOAD); - } - else { - cells = 1; - zatm_vcc->pool = ZATM_AAL0_POOL; - } - if (zatm_vcc->pool < 0) return -EMSGSIZE; - spin_lock_irqsave(&zatm_dev->lock, flags); - zwait(); - zout(uPD98401_OPEN_CHAN,CMR); - zwait(); - DPRINTK("0x%x 0x%x\n",zin(CMR),zin(CER)); - chan = (zin(CMR) & uPD98401_CHAN_ADDR) >> uPD98401_CHAN_ADDR_SHIFT; - spin_unlock_irqrestore(&zatm_dev->lock, flags); - DPRINTK("chan is %d\n",chan); - if (!chan) return -EAGAIN; - use_pool(vcc->dev,zatm_vcc->pool); - DPRINTK("pool %d\n",zatm_vcc->pool); - /* set up VC descriptor */ - spin_lock_irqsave(&zatm_dev->lock, flags); - zpokel(zatm_dev,zatm_vcc->pool << uPD98401_RXVC_POOL_SHIFT, - chan*VC_SIZE/4); - zpokel(zatm_dev,uPD98401_RXVC_OD | (vcc->qos.aal == ATM_AAL5 ? - uPD98401_RXVC_AR : 0) | cells,chan*VC_SIZE/4+1); - zpokel(zatm_dev,0,chan*VC_SIZE/4+2); - zatm_vcc->rx_chan = chan; - zatm_dev->rx_map[chan] = vcc; - spin_unlock_irqrestore(&zatm_dev->lock, flags); - return 0; -} - - -static int open_rx_second(struct atm_vcc *vcc) -{ - struct zatm_dev *zatm_dev; - struct zatm_vcc *zatm_vcc; - unsigned long flags; - int pos,shift; - - DPRINTK("open_rx_second (0x%x)\n",inb_p(0xc053)); - zatm_dev = ZATM_DEV(vcc->dev); - zatm_vcc = ZATM_VCC(vcc); - if (!zatm_vcc->rx_chan) return 0; - spin_lock_irqsave(&zatm_dev->lock, flags); - /* should also handle VPI @@@ */ - pos = vcc->vci >> 1; - shift = (1-(vcc->vci & 1)) << 4; - zpokel(zatm_dev,(zpeekl(zatm_dev,pos) & ~(0xffff << shift)) | - ((zatm_vcc->rx_chan | uPD98401_RXLT_ENBL) << shift),pos); - spin_unlock_irqrestore(&zatm_dev->lock, flags); - return 0; -} - - -static void close_rx(struct atm_vcc *vcc) -{ - struct zatm_dev *zatm_dev; - struct zatm_vcc *zatm_vcc; - unsigned long flags; - int pos,shift; - - zatm_vcc = ZATM_VCC(vcc); - zatm_dev = ZATM_DEV(vcc->dev); - if (!zatm_vcc->rx_chan) return; - DPRINTK("close_rx\n"); - /* disable receiver */ - if (vcc->vpi != ATM_VPI_UNSPEC && vcc->vci != ATM_VCI_UNSPEC) { - spin_lock_irqsave(&zatm_dev->lock, flags); - pos = vcc->vci >> 1; - shift = (1-(vcc->vci & 1)) << 4; - zpokel(zatm_dev,zpeekl(zatm_dev,pos) & ~(0xffff << shift),pos); - zwait(); - zout(uPD98401_NOP,CMR); - zwait(); - zout(uPD98401_NOP,CMR); - spin_unlock_irqrestore(&zatm_dev->lock, flags); - } - spin_lock_irqsave(&zatm_dev->lock, flags); - zwait(); - zout(uPD98401_DEACT_CHAN | uPD98401_CHAN_RT | (zatm_vcc->rx_chan << - uPD98401_CHAN_ADDR_SHIFT),CMR); - zwait(); - udelay(10); /* why oh why ... ? */ - zout(uPD98401_CLOSE_CHAN | uPD98401_CHAN_RT | (zatm_vcc->rx_chan << - uPD98401_CHAN_ADDR_SHIFT),CMR); - zwait(); - if (!(zin(CMR) & uPD98401_CHAN_ADDR)) - printk(KERN_CRIT DEV_LABEL "(itf %d): can't close RX channel " - "%d\n",vcc->dev->number,zatm_vcc->rx_chan); - spin_unlock_irqrestore(&zatm_dev->lock, flags); - zatm_dev->rx_map[zatm_vcc->rx_chan] = NULL; - zatm_vcc->rx_chan = 0; - unuse_pool(vcc->dev,zatm_vcc->pool); -} - - -static int start_rx(struct atm_dev *dev) -{ - struct zatm_dev *zatm_dev; - int i; - - DPRINTK("start_rx\n"); - zatm_dev = ZATM_DEV(dev); - zatm_dev->rx_map = kcalloc(zatm_dev->chans, - sizeof(*zatm_dev->rx_map), - GFP_KERNEL); - if (!zatm_dev->rx_map) return -ENOMEM; - /* set VPI/VCI split (use all VCIs and give what's left to VPIs) */ - zpokel(zatm_dev,(1 << dev->ci_range.vci_bits)-1,uPD98401_VRR); - /* prepare free buffer pools */ - for (i = 0; i <= ZATM_LAST_POOL; i++) { - zatm_dev->pool_info[i].ref_count = 0; - zatm_dev->pool_info[i].rqa_count = 0; - zatm_dev->pool_info[i].rqu_count = 0; - zatm_dev->pool_info[i].low_water = LOW_MARK; - zatm_dev->pool_info[i].high_water = HIGH_MARK; - zatm_dev->pool_info[i].offset = 0; - zatm_dev->pool_info[i].next_off = 0; - zatm_dev->pool_info[i].next_cnt = 0; - zatm_dev->pool_info[i].next_thres = OFF_CNG_THRES; - } - return 0; -} - - -/*----------------------------------- TX ------------------------------------*/ - - -static int do_tx(struct sk_buff *skb) -{ - struct atm_vcc *vcc; - struct zatm_dev *zatm_dev; - struct zatm_vcc *zatm_vcc; - u32 *dsc; - unsigned long flags; - - EVENT("do_tx\n",0,0); - DPRINTK("sending skb %p\n",skb); - vcc = ATM_SKB(skb)->vcc; - zatm_dev = ZATM_DEV(vcc->dev); - zatm_vcc = ZATM_VCC(vcc); - EVENT("iovcnt=%d\n",skb_shinfo(skb)->nr_frags,0); - spin_lock_irqsave(&zatm_dev->lock, flags); - if (!skb_shinfo(skb)->nr_frags) { - if (zatm_vcc->txing == RING_ENTRIES-1) { - spin_unlock_irqrestore(&zatm_dev->lock, flags); - return RING_BUSY; - } - zatm_vcc->txing++; - dsc = zatm_vcc->ring+zatm_vcc->ring_curr; - zatm_vcc->ring_curr = (zatm_vcc->ring_curr+RING_WORDS) & - (RING_ENTRIES*RING_WORDS-1); - dsc[1] = 0; - dsc[2] = skb->len; - dsc[3] = virt_to_bus(skb->data); - mb(); - dsc[0] = uPD98401_TXPD_V | uPD98401_TXPD_DP | uPD98401_TXPD_SM - | (vcc->qos.aal == ATM_AAL5 ? uPD98401_TXPD_AAL5 : 0 | - (ATM_SKB(skb)->atm_options & ATM_ATMOPT_CLP ? - uPD98401_CLPM_1 : uPD98401_CLPM_0)); - EVENT("dsc (0x%lx)\n",(unsigned long) dsc,0); - } - else { -printk("NONONONOO!!!!\n"); - dsc = NULL; -#if 0 - u32 *put; - int i; - - dsc = kmalloc(uPD98401_TXPD_SIZE * 2 + - uPD98401_TXBD_SIZE * ATM_SKB(skb)->iovcnt, GFP_ATOMIC); - if (!dsc) { - if (vcc->pop) - vcc->pop(vcc, skb); - else - dev_kfree_skb_irq(skb); - return -EAGAIN; - } - /* @@@ should check alignment */ - put = dsc+8; - dsc[0] = uPD98401_TXPD_V | uPD98401_TXPD_DP | - (vcc->aal == ATM_AAL5 ? uPD98401_TXPD_AAL5 : 0 | - (ATM_SKB(skb)->atm_options & ATM_ATMOPT_CLP ? - uPD98401_CLPM_1 : uPD98401_CLPM_0)); - dsc[1] = 0; - dsc[2] = ATM_SKB(skb)->iovcnt * uPD98401_TXBD_SIZE; - dsc[3] = virt_to_bus(put); - for (i = 0; i < ATM_SKB(skb)->iovcnt; i++) { - *put++ = ((struct iovec *) skb->data)[i].iov_len; - *put++ = virt_to_bus(((struct iovec *) - skb->data)[i].iov_base); - } - put[-2] |= uPD98401_TXBD_LAST; -#endif - } - ZATM_PRV_DSC(skb) = dsc; - skb_queue_tail(&zatm_vcc->tx_queue,skb); - DPRINTK("QRP=0x%08lx\n",zpeekl(zatm_dev,zatm_vcc->tx_chan*VC_SIZE/4+ - uPD98401_TXVC_QRP)); - zwait(); - zout(uPD98401_TX_READY | (zatm_vcc->tx_chan << - uPD98401_CHAN_ADDR_SHIFT),CMR); - spin_unlock_irqrestore(&zatm_dev->lock, flags); - EVENT("done\n",0,0); - return 0; -} - - -static inline void dequeue_tx(struct atm_vcc *vcc) -{ - struct zatm_vcc *zatm_vcc; - struct sk_buff *skb; - - EVENT("dequeue_tx\n",0,0); - zatm_vcc = ZATM_VCC(vcc); - skb = skb_dequeue(&zatm_vcc->tx_queue); - if (!skb) { - printk(KERN_CRIT DEV_LABEL "(itf %d): dequeue_tx but not " - "txing\n",vcc->dev->number); - return; - } -#if 0 /* @@@ would fail on CLP */ -if (*ZATM_PRV_DSC(skb) != (uPD98401_TXPD_V | uPD98401_TXPD_DP | - uPD98401_TXPD_SM | uPD98401_TXPD_AAL5)) printk("@#*$!!!! (%08x)\n", - *ZATM_PRV_DSC(skb)); -#endif - *ZATM_PRV_DSC(skb) = 0; /* mark as invalid */ - zatm_vcc->txing--; - if (vcc->pop) vcc->pop(vcc,skb); - else dev_kfree_skb_irq(skb); - while ((skb = skb_dequeue(&zatm_vcc->backlog))) - if (do_tx(skb) == RING_BUSY) { - skb_queue_head(&zatm_vcc->backlog,skb); - break; - } - atomic_inc(&vcc->stats->tx); - wake_up(&zatm_vcc->tx_wait); -} - - -static void poll_tx(struct atm_dev *dev,int mbx) -{ - struct zatm_dev *zatm_dev; - unsigned long pos; - u32 x; - - EVENT("poll_tx\n",0,0); - zatm_dev = ZATM_DEV(dev); - pos = (zatm_dev->mbx_start[mbx] & ~0xffffUL) | zin(MTA(mbx)); - while (x = zin(MWA(mbx)), (pos & 0xffff) != x) { - int chan; - -#if 1 - u32 data,*addr; - - EVENT("MBX: host 0x%lx, nic 0x%x\n",pos,x); - addr = (u32 *) pos; - data = *addr; - chan = (data & uPD98401_TXI_CONN) >> uPD98401_TXI_CONN_SHIFT; - EVENT("addr = 0x%lx, data = 0x%08x,",(unsigned long) addr, - data); - EVENT("chan = %d\n",chan,0); -#else -NO ! - chan = (zatm_dev->mbx_start[mbx][pos >> 2] & uPD98401_TXI_CONN) - >> uPD98401_TXI_CONN_SHIFT; -#endif - if (chan < zatm_dev->chans && zatm_dev->tx_map[chan]) - dequeue_tx(zatm_dev->tx_map[chan]); - else { - printk(KERN_CRIT DEV_LABEL "(itf %d): TX indication " - "for non-existing channel %d\n",dev->number,chan); - event_dump(); - } - if (((pos += 4) & 0xffff) == zatm_dev->mbx_end[mbx]) - pos = zatm_dev->mbx_start[mbx]; - } - zout(pos & 0xffff,MTA(mbx)); -} - - -/* - * BUG BUG BUG: Doesn't handle "new-style" rate specification yet. - */ - -static int alloc_shaper(struct atm_dev *dev,int *pcr,int min,int max,int ubr) -{ - struct zatm_dev *zatm_dev; - unsigned long flags; - unsigned long i,m,c; - int shaper; - - DPRINTK("alloc_shaper (min = %d, max = %d)\n",min,max); - zatm_dev = ZATM_DEV(dev); - if (!zatm_dev->free_shapers) return -EAGAIN; - for (shaper = 0; !((zatm_dev->free_shapers >> shaper) & 1); shaper++); - zatm_dev->free_shapers &= ~1 << shaper; - if (ubr) { - c = 5; - i = m = 1; - zatm_dev->ubr_ref_cnt++; - zatm_dev->ubr = shaper; - *pcr = 0; - } - else { - if (min) { - if (min <= 255) { - i = min; - m = ATM_OC3_PCR; - } - else { - i = 255; - m = ATM_OC3_PCR*255/min; - } - } - else { - if (max > zatm_dev->tx_bw) max = zatm_dev->tx_bw; - if (max <= 255) { - i = max; - m = ATM_OC3_PCR; - } - else { - i = 255; - m = DIV_ROUND_UP(ATM_OC3_PCR*255, max); - } - } - if (i > m) { - printk(KERN_CRIT DEV_LABEL "shaper algorithm botched " - "[%d,%d] -> i=%ld,m=%ld\n",min,max,i,m); - m = i; - } - *pcr = i*ATM_OC3_PCR/m; - c = 20; /* @@@ should use max_cdv ! */ - if ((min && *pcr < min) || (max && *pcr > max)) return -EINVAL; - if (zatm_dev->tx_bw < *pcr) return -EAGAIN; - zatm_dev->tx_bw -= *pcr; - } - spin_lock_irqsave(&zatm_dev->lock, flags); - DPRINTK("i = %d, m = %d, PCR = %d\n",i,m,*pcr); - zpokel(zatm_dev,(i << uPD98401_IM_I_SHIFT) | m,uPD98401_IM(shaper)); - zpokel(zatm_dev,c << uPD98401_PC_C_SHIFT,uPD98401_PC(shaper)); - zpokel(zatm_dev,0,uPD98401_X(shaper)); - zpokel(zatm_dev,0,uPD98401_Y(shaper)); - zpokel(zatm_dev,uPD98401_PS_E,uPD98401_PS(shaper)); - spin_unlock_irqrestore(&zatm_dev->lock, flags); - return shaper; -} - - -static void dealloc_shaper(struct atm_dev *dev,int shaper) -{ - struct zatm_dev *zatm_dev; - unsigned long flags; - - zatm_dev = ZATM_DEV(dev); - if (shaper == zatm_dev->ubr) { - if (--zatm_dev->ubr_ref_cnt) return; - zatm_dev->ubr = -1; - } - spin_lock_irqsave(&zatm_dev->lock, flags); - zpokel(zatm_dev,zpeekl(zatm_dev,uPD98401_PS(shaper)) & ~uPD98401_PS_E, - uPD98401_PS(shaper)); - spin_unlock_irqrestore(&zatm_dev->lock, flags); - zatm_dev->free_shapers |= 1 << shaper; -} - - -static void close_tx(struct atm_vcc *vcc) -{ - struct zatm_dev *zatm_dev; - struct zatm_vcc *zatm_vcc; - unsigned long flags; - int chan; - - zatm_vcc = ZATM_VCC(vcc); - zatm_dev = ZATM_DEV(vcc->dev); - chan = zatm_vcc->tx_chan; - if (!chan) return; - DPRINTK("close_tx\n"); - if (skb_peek(&zatm_vcc->backlog)) { - printk("waiting for backlog to drain ...\n"); - event_dump(); - wait_event(zatm_vcc->tx_wait, !skb_peek(&zatm_vcc->backlog)); - } - if (skb_peek(&zatm_vcc->tx_queue)) { - printk("waiting for TX queue to drain ...\n"); - event_dump(); - wait_event(zatm_vcc->tx_wait, !skb_peek(&zatm_vcc->tx_queue)); - } - spin_lock_irqsave(&zatm_dev->lock, flags); -#if 0 - zwait(); - zout(uPD98401_DEACT_CHAN | (chan << uPD98401_CHAN_ADDR_SHIFT),CMR); -#endif - zwait(); - zout(uPD98401_CLOSE_CHAN | (chan << uPD98401_CHAN_ADDR_SHIFT),CMR); - zwait(); - if (!(zin(CMR) & uPD98401_CHAN_ADDR)) - printk(KERN_CRIT DEV_LABEL "(itf %d): can't close TX channel " - "%d\n",vcc->dev->number,chan); - spin_unlock_irqrestore(&zatm_dev->lock, flags); - zatm_vcc->tx_chan = 0; - zatm_dev->tx_map[chan] = NULL; - if (zatm_vcc->shaper != zatm_dev->ubr) { - zatm_dev->tx_bw += vcc->qos.txtp.min_pcr; - dealloc_shaper(vcc->dev,zatm_vcc->shaper); - } - kfree(zatm_vcc->ring); -} - - -static int open_tx_first(struct atm_vcc *vcc) -{ - struct zatm_dev *zatm_dev; - struct zatm_vcc *zatm_vcc; - unsigned long flags; - u32 *loop; - unsigned short chan; - int unlimited; - - DPRINTK("open_tx_first\n"); - zatm_dev = ZATM_DEV(vcc->dev); - zatm_vcc = ZATM_VCC(vcc); - zatm_vcc->tx_chan = 0; - if (vcc->qos.txtp.traffic_class == ATM_NONE) return 0; - spin_lock_irqsave(&zatm_dev->lock, flags); - zwait(); - zout(uPD98401_OPEN_CHAN,CMR); - zwait(); - DPRINTK("0x%x 0x%x\n",zin(CMR),zin(CER)); - chan = (zin(CMR) & uPD98401_CHAN_ADDR) >> uPD98401_CHAN_ADDR_SHIFT; - spin_unlock_irqrestore(&zatm_dev->lock, flags); - DPRINTK("chan is %d\n",chan); - if (!chan) return -EAGAIN; - unlimited = vcc->qos.txtp.traffic_class == ATM_UBR && - (!vcc->qos.txtp.max_pcr || vcc->qos.txtp.max_pcr == ATM_MAX_PCR || - vcc->qos.txtp.max_pcr >= ATM_OC3_PCR); - if (unlimited && zatm_dev->ubr != -1) zatm_vcc->shaper = zatm_dev->ubr; - else { - int pcr; - - if (unlimited) vcc->qos.txtp.max_sdu = ATM_MAX_AAL5_PDU; - if ((zatm_vcc->shaper = alloc_shaper(vcc->dev,&pcr, - vcc->qos.txtp.min_pcr,vcc->qos.txtp.max_pcr,unlimited)) - < 0) { - close_tx(vcc); - return zatm_vcc->shaper; - } - if (pcr > ATM_OC3_PCR) pcr = ATM_OC3_PCR; - vcc->qos.txtp.min_pcr = vcc->qos.txtp.max_pcr = pcr; - } - zatm_vcc->tx_chan = chan; - skb_queue_head_init(&zatm_vcc->tx_queue); - init_waitqueue_head(&zatm_vcc->tx_wait); - /* initialize ring */ - zatm_vcc->ring = kzalloc(RING_SIZE,GFP_KERNEL); - if (!zatm_vcc->ring) return -ENOMEM; - loop = zatm_vcc->ring+RING_ENTRIES*RING_WORDS; - loop[0] = uPD98401_TXPD_V; - loop[1] = loop[2] = 0; - loop[3] = virt_to_bus(zatm_vcc->ring); - zatm_vcc->ring_curr = 0; - zatm_vcc->txing = 0; - skb_queue_head_init(&zatm_vcc->backlog); - zpokel(zatm_dev,virt_to_bus(zatm_vcc->ring), - chan*VC_SIZE/4+uPD98401_TXVC_QRP); - return 0; -} - - -static int open_tx_second(struct atm_vcc *vcc) -{ - struct zatm_dev *zatm_dev; - struct zatm_vcc *zatm_vcc; - unsigned long flags; - - DPRINTK("open_tx_second\n"); - zatm_dev = ZATM_DEV(vcc->dev); - zatm_vcc = ZATM_VCC(vcc); - if (!zatm_vcc->tx_chan) return 0; - /* set up VC descriptor */ - spin_lock_irqsave(&zatm_dev->lock, flags); - zpokel(zatm_dev,0,zatm_vcc->tx_chan*VC_SIZE/4); - zpokel(zatm_dev,uPD98401_TXVC_L | (zatm_vcc->shaper << - uPD98401_TXVC_SHP_SHIFT) | (vcc->vpi << uPD98401_TXVC_VPI_SHIFT) | - vcc->vci,zatm_vcc->tx_chan*VC_SIZE/4+1); - zpokel(zatm_dev,0,zatm_vcc->tx_chan*VC_SIZE/4+2); - spin_unlock_irqrestore(&zatm_dev->lock, flags); - zatm_dev->tx_map[zatm_vcc->tx_chan] = vcc; - return 0; -} - - -static int start_tx(struct atm_dev *dev) -{ - struct zatm_dev *zatm_dev; - int i; - - DPRINTK("start_tx\n"); - zatm_dev = ZATM_DEV(dev); - zatm_dev->tx_map = kmalloc_array(zatm_dev->chans, - sizeof(*zatm_dev->tx_map), - GFP_KERNEL); - if (!zatm_dev->tx_map) return -ENOMEM; - zatm_dev->tx_bw = ATM_OC3_PCR; - zatm_dev->free_shapers = (1 << NR_SHAPERS)-1; - zatm_dev->ubr = -1; - zatm_dev->ubr_ref_cnt = 0; - /* initialize shapers */ - for (i = 0; i < NR_SHAPERS; i++) zpokel(zatm_dev,0,uPD98401_PS(i)); - return 0; -} - - -/*------------------------------- interrupts --------------------------------*/ - - -static irqreturn_t zatm_int(int irq,void *dev_id) -{ - struct atm_dev *dev; - struct zatm_dev *zatm_dev; - u32 reason; - int handled = 0; - - dev = dev_id; - zatm_dev = ZATM_DEV(dev); - while ((reason = zin(GSR))) { - handled = 1; - EVENT("reason 0x%x\n",reason,0); - if (reason & uPD98401_INT_PI) { - EVENT("PHY int\n",0,0); - dev->phy->interrupt(dev); - } - if (reason & uPD98401_INT_RQA) { - unsigned long pools; - int i; - - pools = zin(RQA); - EVENT("RQA (0x%08x)\n",pools,0); - for (i = 0; pools; i++) { - if (pools & 1) { - refill_pool(dev,i); - zatm_dev->pool_info[i].rqa_count++; - } - pools >>= 1; - } - } - if (reason & uPD98401_INT_RQU) { - unsigned long pools; - int i; - pools = zin(RQU); - printk(KERN_WARNING DEV_LABEL "(itf %d): RQU 0x%08lx\n", - dev->number,pools); - event_dump(); - for (i = 0; pools; i++) { - if (pools & 1) { - refill_pool(dev,i); - zatm_dev->pool_info[i].rqu_count++; - } - pools >>= 1; - } - } - /* don't handle RD */ - if (reason & uPD98401_INT_SPE) - printk(KERN_ALERT DEV_LABEL "(itf %d): system parity " - "error at 0x%08x\n",dev->number,zin(ADDR)); - if (reason & uPD98401_INT_CPE) - printk(KERN_ALERT DEV_LABEL "(itf %d): control memory " - "parity error at 0x%08x\n",dev->number,zin(ADDR)); - if (reason & uPD98401_INT_SBE) { - printk(KERN_ALERT DEV_LABEL "(itf %d): system bus " - "error at 0x%08x\n",dev->number,zin(ADDR)); - event_dump(); - } - /* don't handle IND */ - if (reason & uPD98401_INT_MF) { - printk(KERN_CRIT DEV_LABEL "(itf %d): mailbox full " - "(0x%x)\n",dev->number,(reason & uPD98401_INT_MF) - >> uPD98401_INT_MF_SHIFT); - event_dump(); - /* @@@ should try to recover */ - } - if (reason & uPD98401_INT_MM) { - if (reason & 1) poll_rx(dev,0); - if (reason & 2) poll_rx(dev,1); - if (reason & 4) poll_tx(dev,2); - if (reason & 8) poll_tx(dev,3); - } - /* @@@ handle RCRn */ - } - return IRQ_RETVAL(handled); -} - - -/*----------------------------- (E)EPROM access -----------------------------*/ - - -static void eprom_set(struct zatm_dev *zatm_dev, unsigned long value, - unsigned short cmd) -{ - int error; - - if ((error = pci_write_config_dword(zatm_dev->pci_dev,cmd,value))) - printk(KERN_ERR DEV_LABEL ": PCI write failed (0x%02x)\n", - error); -} - - -static unsigned long eprom_get(struct zatm_dev *zatm_dev, unsigned short cmd) -{ - unsigned int value; - int error; - - if ((error = pci_read_config_dword(zatm_dev->pci_dev,cmd,&value))) - printk(KERN_ERR DEV_LABEL ": PCI read failed (0x%02x)\n", - error); - return value; -} - - -static void eprom_put_bits(struct zatm_dev *zatm_dev, unsigned long data, - int bits, unsigned short cmd) -{ - unsigned long value; - int i; - - for (i = bits-1; i >= 0; i--) { - value = ZEPROM_CS | (((data >> i) & 1) ? ZEPROM_DI : 0); - eprom_set(zatm_dev,value,cmd); - eprom_set(zatm_dev,value | ZEPROM_SK,cmd); - eprom_set(zatm_dev,value,cmd); - } -} - - -static void eprom_get_byte(struct zatm_dev *zatm_dev, unsigned char *byte, - unsigned short cmd) -{ - int i; - - *byte = 0; - for (i = 8; i; i--) { - eprom_set(zatm_dev,ZEPROM_CS,cmd); - eprom_set(zatm_dev,ZEPROM_CS | ZEPROM_SK,cmd); - *byte <<= 1; - if (eprom_get(zatm_dev,cmd) & ZEPROM_DO) *byte |= 1; - eprom_set(zatm_dev,ZEPROM_CS,cmd); - } -} - - -static int eprom_try_esi(struct atm_dev *dev, unsigned short cmd, int offset, - int swap) -{ - unsigned char buf[ZEPROM_SIZE]; - struct zatm_dev *zatm_dev; - int i; - - zatm_dev = ZATM_DEV(dev); - for (i = 0; i < ZEPROM_SIZE; i += 2) { - eprom_set(zatm_dev,ZEPROM_CS,cmd); /* select EPROM */ - eprom_put_bits(zatm_dev,ZEPROM_CMD_READ,ZEPROM_CMD_LEN,cmd); - eprom_put_bits(zatm_dev,i >> 1,ZEPROM_ADDR_LEN,cmd); - eprom_get_byte(zatm_dev,buf+i+swap,cmd); - eprom_get_byte(zatm_dev,buf+i+1-swap,cmd); - eprom_set(zatm_dev,0,cmd); /* deselect EPROM */ - } - memcpy(dev->esi,buf+offset,ESI_LEN); - return memcmp(dev->esi,"\0\0\0\0\0",ESI_LEN); /* assumes ESI_LEN == 6 */ -} - - -static void eprom_get_esi(struct atm_dev *dev) -{ - if (eprom_try_esi(dev,ZEPROM_V1_REG,ZEPROM_V1_ESI_OFF,1)) return; - (void) eprom_try_esi(dev,ZEPROM_V2_REG,ZEPROM_V2_ESI_OFF,0); -} - - -/*--------------------------------- entries ---------------------------------*/ - - -static int zatm_init(struct atm_dev *dev) -{ - struct zatm_dev *zatm_dev; - struct pci_dev *pci_dev; - unsigned short command; - int error,i,last; - unsigned long t0,t1,t2; - - DPRINTK(">zatm_init\n"); - zatm_dev = ZATM_DEV(dev); - spin_lock_init(&zatm_dev->lock); - pci_dev = zatm_dev->pci_dev; - zatm_dev->base = pci_resource_start(pci_dev, 0); - zatm_dev->irq = pci_dev->irq; - if ((error = pci_read_config_word(pci_dev,PCI_COMMAND,&command))) { - printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%02x\n", - dev->number,error); - return -EINVAL; - } - if ((error = pci_write_config_word(pci_dev,PCI_COMMAND, - command | PCI_COMMAND_IO | PCI_COMMAND_MASTER))) { - printk(KERN_ERR DEV_LABEL "(itf %d): can't enable IO (0x%02x)" - "\n",dev->number,error); - return -EIO; - } - eprom_get_esi(dev); - printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%x,irq=%d,", - dev->number,pci_dev->revision,zatm_dev->base,zatm_dev->irq); - /* reset uPD98401 */ - zout(0,SWR); - while (!(zin(GSR) & uPD98401_INT_IND)); - zout(uPD98401_GMR_ONE /*uPD98401_BURST4*/,GMR); - last = MAX_CRAM_SIZE; - for (i = last-RAM_INCREMENT; i >= 0; i -= RAM_INCREMENT) { - zpokel(zatm_dev,0x55555555,i); - if (zpeekl(zatm_dev,i) != 0x55555555) last = i; - else { - zpokel(zatm_dev,0xAAAAAAAA,i); - if (zpeekl(zatm_dev,i) != 0xAAAAAAAA) last = i; - else zpokel(zatm_dev,i,i); - } - } - for (i = 0; i < last; i += RAM_INCREMENT) - if (zpeekl(zatm_dev,i) != i) break; - zatm_dev->mem = i << 2; - while (i) zpokel(zatm_dev,0,--i); - /* reset again to rebuild memory pointers */ - zout(0,SWR); - while (!(zin(GSR) & uPD98401_INT_IND)); - zout(uPD98401_GMR_ONE | uPD98401_BURST8 | uPD98401_BURST4 | - uPD98401_BURST2 | uPD98401_GMR_PM | uPD98401_GMR_DR,GMR); - /* TODO: should shrink allocation now */ - printk("mem=%dkB,%s (",zatm_dev->mem >> 10,zatm_dev->copper ? "UTP" : - "MMF"); - for (i = 0; i < ESI_LEN; i++) - printk("%02X%s",dev->esi[i],i == ESI_LEN-1 ? ")\n" : "-"); - do { - unsigned long flags; - - spin_lock_irqsave(&zatm_dev->lock, flags); - t0 = zpeekl(zatm_dev,uPD98401_TSR); - udelay(10); - t1 = zpeekl(zatm_dev,uPD98401_TSR); - udelay(1010); - t2 = zpeekl(zatm_dev,uPD98401_TSR); - spin_unlock_irqrestore(&zatm_dev->lock, flags); - } - while (t0 > t1 || t1 > t2); /* loop if wrapping ... */ - zatm_dev->khz = t2-2*t1+t0; - printk(KERN_NOTICE DEV_LABEL "(itf %d): uPD98401 %d.%d at %d.%03d " - "MHz\n",dev->number, - (zin(VER) & uPD98401_MAJOR) >> uPD98401_MAJOR_SHIFT, - zin(VER) & uPD98401_MINOR,zatm_dev->khz/1000,zatm_dev->khz % 1000); - return uPD98402_init(dev); -} - - -static int zatm_start(struct atm_dev *dev) -{ - struct zatm_dev *zatm_dev = ZATM_DEV(dev); - struct pci_dev *pdev = zatm_dev->pci_dev; - unsigned long curr; - int pools,vccs,rx; - int error, i, ld; - - DPRINTK("zatm_start\n"); - zatm_dev->rx_map = zatm_dev->tx_map = NULL; - for (i = 0; i < NR_MBX; i++) - zatm_dev->mbx_start[i] = 0; - error = request_irq(zatm_dev->irq, zatm_int, IRQF_SHARED, DEV_LABEL, dev); - if (error < 0) { - printk(KERN_ERR DEV_LABEL "(itf %d): IRQ%d is already in use\n", - dev->number,zatm_dev->irq); - goto done; - } - /* define memory regions */ - pools = NR_POOLS; - if (NR_SHAPERS*SHAPER_SIZE > pools*POOL_SIZE) - pools = NR_SHAPERS*SHAPER_SIZE/POOL_SIZE; - vccs = (zatm_dev->mem-NR_SHAPERS*SHAPER_SIZE-pools*POOL_SIZE)/ - (2*VC_SIZE+RX_SIZE); - ld = -1; - for (rx = 1; rx < vccs; rx <<= 1) ld++; - dev->ci_range.vpi_bits = 0; /* @@@ no VPI for now */ - dev->ci_range.vci_bits = ld; - dev->link_rate = ATM_OC3_PCR; - zatm_dev->chans = vccs; /* ??? */ - curr = rx*RX_SIZE/4; - DPRINTK("RX pool 0x%08lx\n",curr); - zpokel(zatm_dev,curr,uPD98401_PMA); /* receive pool */ - zatm_dev->pool_base = curr; - curr += pools*POOL_SIZE/4; - DPRINTK("Shapers 0x%08lx\n",curr); - zpokel(zatm_dev,curr,uPD98401_SMA); /* shapers */ - curr += NR_SHAPERS*SHAPER_SIZE/4; - DPRINTK("Free 0x%08lx\n",curr); - zpokel(zatm_dev,curr,uPD98401_TOS); /* free pool */ - printk(KERN_INFO DEV_LABEL "(itf %d): %d shapers, %d pools, %d RX, " - "%ld VCs\n",dev->number,NR_SHAPERS,pools,rx, - (zatm_dev->mem-curr*4)/VC_SIZE); - /* create mailboxes */ - for (i = 0; i < NR_MBX; i++) { - void *mbx; - dma_addr_t mbx_dma; - - if (!mbx_entries[i]) - continue; - mbx = dma_alloc_coherent(&pdev->dev, - 2 * MBX_SIZE(i), &mbx_dma, GFP_KERNEL); - if (!mbx) { - error = -ENOMEM; - goto out; - } - /* - * Alignment provided by dma_alloc_coherent() isn't enough - * for this device. - */ - if (((unsigned long)mbx ^ mbx_dma) & 0xffff) { - printk(KERN_ERR DEV_LABEL "(itf %d): system " - "bus incompatible with driver\n", dev->number); - dma_free_coherent(&pdev->dev, 2*MBX_SIZE(i), mbx, mbx_dma); - error = -ENODEV; - goto out; - } - DPRINTK("mbx@0x%08lx-0x%08lx\n", mbx, mbx + MBX_SIZE(i)); - zatm_dev->mbx_start[i] = (unsigned long)mbx; - zatm_dev->mbx_dma[i] = mbx_dma; - zatm_dev->mbx_end[i] = (zatm_dev->mbx_start[i] + MBX_SIZE(i)) & - 0xffff; - zout(mbx_dma >> 16, MSH(i)); - zout(mbx_dma, MSL(i)); - zout(zatm_dev->mbx_end[i], MBA(i)); - zout((unsigned long)mbx & 0xffff, MTA(i)); - zout((unsigned long)mbx & 0xffff, MWA(i)); - } - error = start_tx(dev); - if (error) - goto out; - error = start_rx(dev); - if (error) - goto out_tx; - error = dev->phy->start(dev); - if (error) - goto out_rx; - zout(0xffffffff,IMR); /* enable interrupts */ - /* enable TX & RX */ - zout(zin(GMR) | uPD98401_GMR_SE | uPD98401_GMR_RE,GMR); -done: - return error; - -out_rx: - kfree(zatm_dev->rx_map); -out_tx: - kfree(zatm_dev->tx_map); -out: - while (i-- > 0) { - dma_free_coherent(&pdev->dev, 2 * MBX_SIZE(i), - (void *)zatm_dev->mbx_start[i], - zatm_dev->mbx_dma[i]); - } - free_irq(zatm_dev->irq, dev); - goto done; -} - - -static void zatm_close(struct atm_vcc *vcc) -{ - DPRINTK(">zatm_close\n"); - if (!ZATM_VCC(vcc)) return; - clear_bit(ATM_VF_READY,&vcc->flags); - close_rx(vcc); - EVENT("close_tx\n",0,0); - close_tx(vcc); - DPRINTK("zatm_close: done waiting\n"); - /* deallocate memory */ - kfree(ZATM_VCC(vcc)); - vcc->dev_data = NULL; - clear_bit(ATM_VF_ADDR,&vcc->flags); -} - - -static int zatm_open(struct atm_vcc *vcc) -{ - struct zatm_vcc *zatm_vcc; - short vpi = vcc->vpi; - int vci = vcc->vci; - int error; - - DPRINTK(">zatm_open\n"); - if (!test_bit(ATM_VF_PARTIAL,&vcc->flags)) - vcc->dev_data = NULL; - if (vci != ATM_VPI_UNSPEC && vpi != ATM_VCI_UNSPEC) - set_bit(ATM_VF_ADDR,&vcc->flags); - if (vcc->qos.aal != ATM_AAL5) return -EINVAL; /* @@@ AAL0 */ - DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n",vcc->dev->number,vcc->vpi, - vcc->vci); - if (!test_bit(ATM_VF_PARTIAL,&vcc->flags)) { - zatm_vcc = kmalloc(sizeof(*zatm_vcc), GFP_KERNEL); - if (!zatm_vcc) { - clear_bit(ATM_VF_ADDR,&vcc->flags); - return -ENOMEM; - } - vcc->dev_data = zatm_vcc; - ZATM_VCC(vcc)->tx_chan = 0; /* for zatm_close after open_rx */ - if ((error = open_rx_first(vcc))) { - zatm_close(vcc); - return error; - } - if ((error = open_tx_first(vcc))) { - zatm_close(vcc); - return error; - } - } - if (vci == ATM_VPI_UNSPEC || vpi == ATM_VCI_UNSPEC) return 0; - if ((error = open_rx_second(vcc))) { - zatm_close(vcc); - return error; - } - if ((error = open_tx_second(vcc))) { - zatm_close(vcc); - return error; - } - set_bit(ATM_VF_READY,&vcc->flags); - return 0; -} - - -static int zatm_change_qos(struct atm_vcc *vcc,struct atm_qos *qos,int flags) -{ - printk("Not yet implemented\n"); - return -ENOSYS; - /* @@@ */ -} - - -static int zatm_ioctl(struct atm_dev *dev,unsigned int cmd,void __user *arg) -{ - struct zatm_dev *zatm_dev; - unsigned long flags; - - zatm_dev = ZATM_DEV(dev); - switch (cmd) { - case ZATM_GETPOOLZ: - if (!capable(CAP_NET_ADMIN)) return -EPERM; - fallthrough; - case ZATM_GETPOOL: - { - struct zatm_pool_info info; - int pool; - - if (get_user(pool, - &((struct zatm_pool_req __user *) arg)->pool_num)) - return -EFAULT; - if (pool < 0 || pool > ZATM_LAST_POOL) - return -EINVAL; - pool = array_index_nospec(pool, - ZATM_LAST_POOL + 1); - spin_lock_irqsave(&zatm_dev->lock, flags); - info = zatm_dev->pool_info[pool]; - if (cmd == ZATM_GETPOOLZ) { - zatm_dev->pool_info[pool].rqa_count = 0; - zatm_dev->pool_info[pool].rqu_count = 0; - } - spin_unlock_irqrestore(&zatm_dev->lock, flags); - return copy_to_user( - &((struct zatm_pool_req __user *) arg)->info, - &info,sizeof(info)) ? -EFAULT : 0; - } - case ZATM_SETPOOL: - { - struct zatm_pool_info info; - int pool; - - if (!capable(CAP_NET_ADMIN)) return -EPERM; - if (get_user(pool, - &((struct zatm_pool_req __user *) arg)->pool_num)) - return -EFAULT; - if (pool < 0 || pool > ZATM_LAST_POOL) - return -EINVAL; - pool = array_index_nospec(pool, - ZATM_LAST_POOL + 1); - if (copy_from_user(&info, - &((struct zatm_pool_req __user *) arg)->info, - sizeof(info))) return -EFAULT; - if (!info.low_water) - info.low_water = zatm_dev-> - pool_info[pool].low_water; - if (!info.high_water) - info.high_water = zatm_dev-> - pool_info[pool].high_water; - if (!info.next_thres) - info.next_thres = zatm_dev-> - pool_info[pool].next_thres; - if (info.low_water >= info.high_water || - info.low_water < 0) - return -EINVAL; - spin_lock_irqsave(&zatm_dev->lock, flags); - zatm_dev->pool_info[pool].low_water = - info.low_water; - zatm_dev->pool_info[pool].high_water = - info.high_water; - zatm_dev->pool_info[pool].next_thres = - info.next_thres; - spin_unlock_irqrestore(&zatm_dev->lock, flags); - return 0; - } - default: - if (!dev->phy->ioctl) return -ENOIOCTLCMD; - return dev->phy->ioctl(dev,cmd,arg); - } -} - -static int zatm_send(struct atm_vcc *vcc,struct sk_buff *skb) -{ - int error; - - EVENT(">zatm_send 0x%lx\n",(unsigned long) skb,0); - if (!ZATM_VCC(vcc)->tx_chan || !test_bit(ATM_VF_READY,&vcc->flags)) { - if (vcc->pop) vcc->pop(vcc,skb); - else dev_kfree_skb(skb); - return -EINVAL; - } - if (!skb) { - printk(KERN_CRIT "!skb in zatm_send ?\n"); - if (vcc->pop) vcc->pop(vcc,skb); - return -EINVAL; - } - ATM_SKB(skb)->vcc = vcc; - error = do_tx(skb); - if (error != RING_BUSY) return error; - skb_queue_tail(&ZATM_VCC(vcc)->backlog,skb); - return 0; -} - - -static void zatm_phy_put(struct atm_dev *dev,unsigned char value, - unsigned long addr) -{ - struct zatm_dev *zatm_dev; - - zatm_dev = ZATM_DEV(dev); - zwait(); - zout(value,CER); - zout(uPD98401_IND_ACC | uPD98401_IA_B0 | - (uPD98401_IA_TGT_PHY << uPD98401_IA_TGT_SHIFT) | addr,CMR); -} - - -static unsigned char zatm_phy_get(struct atm_dev *dev,unsigned long addr) -{ - struct zatm_dev *zatm_dev; - - zatm_dev = ZATM_DEV(dev); - zwait(); - zout(uPD98401_IND_ACC | uPD98401_IA_B0 | uPD98401_IA_RW | - (uPD98401_IA_TGT_PHY << uPD98401_IA_TGT_SHIFT) | addr,CMR); - zwait(); - return zin(CER) & 0xff; -} - - -static const struct atmdev_ops ops = { - .open = zatm_open, - .close = zatm_close, - .ioctl = zatm_ioctl, - .send = zatm_send, - .phy_put = zatm_phy_put, - .phy_get = zatm_phy_get, - .change_qos = zatm_change_qos, -}; - -static int zatm_init_one(struct pci_dev *pci_dev, - const struct pci_device_id *ent) -{ - struct atm_dev *dev; - struct zatm_dev *zatm_dev; - int ret = -ENOMEM; - - zatm_dev = kmalloc(sizeof(*zatm_dev), GFP_KERNEL); - if (!zatm_dev) { - printk(KERN_EMERG "%s: memory shortage\n", DEV_LABEL); - goto out; - } - - dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &ops, -1, NULL); - if (!dev) - goto out_free; - - ret = pci_enable_device(pci_dev); - if (ret < 0) - goto out_deregister; - - ret = pci_request_regions(pci_dev, DEV_LABEL); - if (ret < 0) - goto out_disable; - - ret = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32)); - if (ret < 0) - goto out_release; - - zatm_dev->pci_dev = pci_dev; - dev->dev_data = zatm_dev; - zatm_dev->copper = (int)ent->driver_data; - if ((ret = zatm_init(dev)) || (ret = zatm_start(dev))) - goto out_release; - - pci_set_drvdata(pci_dev, dev); - zatm_dev->more = zatm_boards; - zatm_boards = dev; - ret = 0; -out: - return ret; - -out_release: - pci_release_regions(pci_dev); -out_disable: - pci_disable_device(pci_dev); -out_deregister: - atm_dev_deregister(dev); -out_free: - kfree(zatm_dev); - goto out; -} - - -MODULE_LICENSE("GPL"); - -static const struct pci_device_id zatm_pci_tbl[] = { - { PCI_VDEVICE(ZEITNET, PCI_DEVICE_ID_ZEITNET_1221), ZATM_COPPER }, - { PCI_VDEVICE(ZEITNET, PCI_DEVICE_ID_ZEITNET_1225), 0 }, - { 0, } -}; -MODULE_DEVICE_TABLE(pci, zatm_pci_tbl); - -static struct pci_driver zatm_driver = { - .name = DEV_LABEL, - .id_table = zatm_pci_tbl, - .probe = zatm_init_one, -}; - -static int __init zatm_init_module(void) -{ - return pci_register_driver(&zatm_driver); -} - -module_init(zatm_init_module); -/* module_exit not defined so not unloadable */ diff --git a/drivers/atm/zatm.h b/drivers/atm/zatm.h deleted file mode 100644 index 8204369fe825..000000000000 --- a/drivers/atm/zatm.h +++ /dev/null @@ -1,104 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* drivers/atm/zatm.h - ZeitNet ZN122x device driver declarations */ - -/* Written 1995-1998 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef DRIVER_ATM_ZATM_H -#define DRIVER_ATM_ZATM_H - -#include <linux/skbuff.h> -#include <linux/atm.h> -#include <linux/atmdev.h> -#include <linux/sonet.h> -#include <linux/pci.h> - - -#define DEV_LABEL "zatm" - -#define MAX_AAL5_PDU 10240 /* allocate for AAL5 PDUs of this size */ -#define MAX_RX_SIZE_LD 14 /* ceil(log2((MAX_AAL5_PDU+47)/48)) */ - -#define LOW_MARK 12 /* start adding new buffers if less than 12 */ -#define HIGH_MARK 30 /* stop adding buffers after reaching 30 */ -#define OFF_CNG_THRES 5 /* threshold for offset changes */ - -#define RX_SIZE 2 /* RX lookup entry size (in bytes) */ -#define NR_POOLS 32 /* number of free buffer pointers */ -#define POOL_SIZE 8 /* buffer entry size (in bytes) */ -#define NR_SHAPERS 16 /* number of shapers */ -#define SHAPER_SIZE 4 /* shaper entry size (in bytes) */ -#define VC_SIZE 32 /* VC dsc (TX or RX) size (in bytes) */ - -#define RING_ENTRIES 32 /* ring entries (without back pointer) */ -#define RING_WORDS 4 /* ring element size */ -#define RING_SIZE (sizeof(unsigned long)*(RING_ENTRIES+1)*RING_WORDS) - -#define NR_MBX 4 /* four mailboxes */ -#define MBX_RX_0 0 /* mailbox indices */ -#define MBX_RX_1 1 -#define MBX_TX_0 2 -#define MBX_TX_1 3 - -struct zatm_vcc { - /*-------------------------------- RX part */ - int rx_chan; /* RX channel, 0 if none */ - int pool; /* free buffer pool */ - /*-------------------------------- TX part */ - int tx_chan; /* TX channel, 0 if none */ - int shaper; /* shaper, <0 if none */ - struct sk_buff_head tx_queue; /* list of buffers in transit */ - wait_queue_head_t tx_wait; /* for close */ - u32 *ring; /* transmit ring */ - int ring_curr; /* current write position */ - int txing; /* number of transmits in progress */ - struct sk_buff_head backlog; /* list of buffers waiting for ring */ -}; - -struct zatm_dev { - /*-------------------------------- TX part */ - int tx_bw; /* remaining bandwidth */ - u32 free_shapers; /* bit set */ - int ubr; /* UBR shaper; -1 if none */ - int ubr_ref_cnt; /* number of VCs using UBR shaper */ - /*-------------------------------- RX part */ - int pool_ref[NR_POOLS]; /* free buffer pool usage counters */ - volatile struct sk_buff *last_free[NR_POOLS]; - /* last entry in respective pool */ - struct sk_buff_head pool[NR_POOLS];/* free buffer pools */ - struct zatm_pool_info pool_info[NR_POOLS]; /* pool information */ - /*-------------------------------- maps */ - struct atm_vcc **tx_map; /* TX VCCs */ - struct atm_vcc **rx_map; /* RX VCCs */ - int chans; /* map size, must be 2^n */ - /*-------------------------------- mailboxes */ - unsigned long mbx_start[NR_MBX];/* start addresses */ - dma_addr_t mbx_dma[NR_MBX]; - u16 mbx_end[NR_MBX]; /* end offset (in bytes) */ - /*-------------------------------- other pointers */ - u32 pool_base; /* Free buffer pool dsc (word addr) */ - /*-------------------------------- ZATM links */ - struct atm_dev *more; /* other ZATM devices */ - /*-------------------------------- general information */ - int mem; /* RAM on board (in bytes) */ - int khz; /* timer clock */ - int copper; /* PHY type */ - unsigned char irq; /* IRQ */ - unsigned int base; /* IO base address */ - struct pci_dev *pci_dev; /* PCI stuff */ - spinlock_t lock; -}; - - -#define ZATM_DEV(d) ((struct zatm_dev *) (d)->dev_data) -#define ZATM_VCC(d) ((struct zatm_vcc *) (d)->dev_data) - - -struct zatm_skb_prv { - struct atm_skb_data _; /* reserved */ - u32 *dsc; /* pointer to skb's descriptor */ -}; - -#define ZATM_PRV_DSC(skb) (((struct zatm_skb_prv *) (skb)->cb)->dsc) - -#endif diff --git a/include/uapi/linux/atm_zatm.h b/include/uapi/linux/atm_zatm.h deleted file mode 100644 index 5135027b93c1..000000000000 --- a/include/uapi/linux/atm_zatm.h +++ /dev/null @@ -1,47 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atm_zatm.h - Driver-specific declarations of the ZATM driver (for use by - driver-specific utilities) */ - -/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef LINUX_ATM_ZATM_H -#define LINUX_ATM_ZATM_H - -/* - * Note: non-kernel programs including this file must also include - * sys/types.h for struct timeval - */ - -#include <linux/atmapi.h> -#include <linux/atmioc.h> - -#define ZATM_GETPOOL _IOW('a',ATMIOC_SARPRV+1,struct atmif_sioc) - /* get pool statistics */ -#define ZATM_GETPOOLZ _IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc) - /* get statistics and zero */ -#define ZATM_SETPOOL _IOW('a',ATMIOC_SARPRV+3,struct atmif_sioc) - /* set pool parameters */ - -struct zatm_pool_info { - int ref_count; /* free buffer pool usage counters */ - int low_water,high_water; /* refill parameters */ - int rqa_count,rqu_count; /* queue condition counters */ - int offset,next_off; /* alignment optimizations: offset */ - int next_cnt,next_thres; /* repetition counter and threshold */ -}; - -struct zatm_pool_req { - int pool_num; /* pool number */ - struct zatm_pool_info info; /* actual information */ -}; - -#define ZATM_OAM_POOL 0 /* free buffer pool for OAM cells */ -#define ZATM_AAL0_POOL 1 /* free buffer pool for AAL0 cells */ -#define ZATM_AAL5_POOL_BASE 2 /* first AAL5 free buffer pool */ -#define ZATM_LAST_POOL ZATM_AAL5_POOL_BASE+10 /* max. 64 kB */ - -#define ZATM_TIMER_HISTORY_SIZE 16 /* number of timer adjustments to - record; must be 2^n */ - -#endif

[net-next,3/6] net: atm: remove support for ZeitNet ZN122x ATM devices

Commit Message

Comments

Patch