Message ID | 20220817130342.568396-14-krzysztof.kozlowski@linaro.org (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | arm64: dts: qcom: improvements to TCSR mutex in DTS | expand |
On 17.08.2022 15:03, Krzysztof Kozlowski wrote: > The TCSR mutex bindings allow device to be described only with address > space (so it uses MMIO, not syscon regmap). This seems reasonable as > TCSR mutex is actually a dedicated IO address space and it also fixes DT > schema checks: > > qcom/sdm636-sony-xperia-ganges-mermaid.dtb: hwlock: 'reg' is a required property > qcom/sdm636-sony-xperia-ganges-mermaid.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+' > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- Not tested on a device, but looks good to the eye: Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Konrad > arch/arm64/boot/dts/qcom/sdm630.dtsi | 13 ++++--------- > 1 file changed, 4 insertions(+), 9 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi > index 1bc9091cad2a..40a40d00eae4 100644 > --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi > @@ -697,9 +697,10 @@ tsens: thermal-sensor@10ae000 { > #thermal-sensor-cells = <1>; > }; > > - tcsr_mutex_regs: syscon@1f40000 { > - compatible = "syscon"; > - reg = <0x01f40000 0x40000>; > + tcsr_mutex: hwlock@1f40000 { > + compatible = "qcom,tcsr-mutex"; > + reg = <0x01f40000 0x20000>; > + #hwlock-cells = <1>; > }; > > tlmm: pinctrl@3100000 { > @@ -2351,12 +2352,6 @@ intc: interrupt-controller@17a00000 { > }; > }; > > - tcsr_mutex: hwlock { > - compatible = "qcom,tcsr-mutex"; > - syscon = <&tcsr_mutex_regs 0 0x1000>; > - #hwlock-cells = <1>; > - }; > - > sound: sound { > }; >
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 1bc9091cad2a..40a40d00eae4 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -697,9 +697,10 @@ tsens: thermal-sensor@10ae000 { #thermal-sensor-cells = <1>; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; - reg = <0x01f40000 0x40000>; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x20000>; + #hwlock-cells = <1>; }; tlmm: pinctrl@3100000 { @@ -2351,12 +2352,6 @@ intc: interrupt-controller@17a00000 { }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - sound: sound { };
The TCSR mutex bindings allow device to be described only with address space (so it uses MMIO, not syscon regmap). This seems reasonable as TCSR mutex is actually a dedicated IO address space and it also fixes DT schema checks: qcom/sdm636-sony-xperia-ganges-mermaid.dtb: hwlock: 'reg' is a required property qcom/sdm636-sony-xperia-ganges-mermaid.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-)