| Message ID | 20220817232057.73643-1-elliott@hpe.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | crypto: Kconfig - simplify menus and help text | expand |
On 8/17/22 19:20, Robert Elliott wrote: > Improve the "make menuconfig" experience under the > Cryptographic API page. > > The first of two patch series. This series extracts all the > architecture-specific entries from > crypto/Kconfig > into > arch/*/crypto/Kconfig > > A subsequent series will work on the entry titles and help text. > > Tested by running commands like these for arm, arm64, mips, powerpc, > sparc, s390, and x86: > make ARCH=arm O=build-arm allmodconfig > cd build-arm > make ARCH=arm menuconfig > make ARCH=arm CROSS_COMPILE=arm-linux-gnu- -j 55 > > Notes: > 1. powerpc doesn't build for reasons unrelated to this series. Did it build without this patchset ? Can you please share more details on the error or reasons? Thanks & Regards, - Nayna
> -----Original Message----- > From: Nayna <nayna@linux.vnet.ibm.com> > Sent: Wednesday, August 17, 2022 7:42 PM > To: Elliott, Robert (Servers) <elliott@hpe.com>; > herbert@gondor.apana.org.au; davem@davemloft.net; ebiggers@kernel.org; > linux-crypto@vger.kernel.org; linux-kernel@vger.kernel.org > Subject: Re: [PATCH v2 00/10] crypto: Kconfig - simplify menus and help > text > > > On 8/17/22 19:20, Robert Elliott wrote: > > Improve the "make menuconfig" experience under the > > Cryptographic API page. > > > > The first of two patch series. This series extracts all the > > architecture-specific entries from > > crypto/Kconfig > > into > > arch/*/crypto/Kconfig > > > > A subsequent series will work on the entry titles and help text. > > > > Tested by running commands like these for arm, arm64, mips, powerpc, > > sparc, s390, and x86: > > make ARCH=arm O=build-arm allmodconfig > > cd build-arm > > make ARCH=arm menuconfig > > make ARCH=arm CROSS_COMPILE=arm-linux-gnu- -j 55 > > > > Notes: > > 1. powerpc doesn't build for reasons unrelated to this series. > > Did it build without this patchset ? Can you please share more details > on the error or reasons? I haven't tried without the patchset, but will try that out, and will also try defconfig rather than allmodconfig. I'm using Fedora 36 on x86 with kernel 5.19-rc7. After building init/main.o, the "check-local-export" script is complaining. (I'll email you the full log file) powerpc64-linux-gnu-gcc -Wp,-MMD,init/.main.o.d -nostdinc -I../arch/powerpc/include -I./arch/powerpc/include/generated -I../include -I./include -I../arch/powerpc/include/uapi -I./arch/powerpc/include/generated/uapi -I../include/uapi -I./include/generated/uapi -include ../include/linux/compiler-version.h -include ../include/linux/kconfig.h -include ../include/linux/compiler_types.h -D__KERNEL__ -I ../arch/powerpc -DHAVE_AS_ATHIGH=1 -fmacro-prefix-map=../= -Wall -Wundef [...lots of options...] -I ../init -I ./init -ffunction-sections -fdata-sections -DKBUILD_MODFILE='"init/main"' -DKBUILD_BASENAME='"main"' -DKBUILD_MODNAME='"main"' -D__KBUILD_MODNAME=kmod_main -c -o init/main.o ../init/main.c ../scripts/check-local-export init/main.o if powerpc64-linux-gnu-nm --synthetic init/main.o 2>/dev/null | grep -q __ksymtab; then powerpc64-linux-gnu-gcc -E -Wall -Wundef [...lots of options...] -DKBUILD_MODFILE='"init/main"' -DKBUILD_BASENAME='"main"' -DKBUILD_MODNAME='"main"' -D__KBUILD_MODNAME=kmod_main ../init/main.c | scripts/genksyms/genksyms -r /dev/null >> init/.main.o.cmd; fi if [ init/main.o != "scripts/mod/empty.o" ]; then ./scripts/recordmcount "init/main.o"; fi; Cannot find symbol for section 92: .text.free_initmem. init/main.o: failed make[1]: *** [../scripts/Makefile.build:249: init/main.o] Error 1 make[1]: *** Deleting file 'init/main.o' make: *** [../Makefile:1843: init] Error 2 Most architectures have that function in init.c. powerpc and riscv (which I haven't tried) have that in files with different names: source/arch/arm/mm/init.c:void free_initmem(void) source/arch/arm64/mm/init.c:void free_initmem(void) source/arch/csky/mm/init.c:void free_initmem(void) source/arch/ia64/mm/init.c:free_initmem (void) source/arch/loongarch/mm/init.c:void __ref free_initmem(void) source/arch/m68k/mm/init.c:void free_initmem(void) source/arch/mips/mm/init.c:void __ref free_initmem(void) source/arch/parisc/mm/init.c:void free_initmem(void) source/arch/powerpc/mm/mem.c:void free_initmem(void) source/arch/riscv/kernel/setup.c:void free_initmem(void) source/arch/s390/mm/init.c:void free_initmem(void) source/arch/sparc/mm/init_64.c:void free_initmem(void) source/arch/um/kernel/mem.c:void free_initmem(void) source/arch/x86/mm/init.c:void __ref free_initmem(void) source/include/linux/mm.h:extern void free_initmem(void); source/init/main.c:void __weak free_initmem(void) > Thanks & Regards, > > - Nayna
> -----Original Message----- > From: Elliott, Robert (Servers) <elliott@hpe.com> > Sent: Wednesday, August 17, 2022 9:13 PM > Subject: RE: [PATCH v2 00/10] crypto: Kconfig - simplify menus and help text > > > -----Original Message----- > > From: Nayna <nayna@linux.vnet.ibm.com> > > Sent: Wednesday, August 17, 2022 7:42 PM > > > > > Notes: > > > 1. powerpc doesn't build for reasons unrelated to this series. > > > > Did it build without this patchset ? Can you please share more > > details on the error or reasons? > > I haven't tried without the patchset, but will try that out, and will > also try defconfig rather than allmodconfig. The defconfig target works fine.
On Wed, Aug 17, 2022 at 06:20:47PM -0500, Robert Elliott wrote: > Improve the "make menuconfig" experience under the > Cryptographic API page. > > The first of two patch series. This series extracts all the > architecture-specific entries from > crypto/Kconfig > into > arch/*/crypto/Kconfig > > A subsequent series will work on the entry titles and help text. > > Tested by running commands like these for arm, arm64, mips, powerpc, > sparc, s390, and x86: > make ARCH=arm O=build-arm allmodconfig > cd build-arm > make ARCH=arm menuconfig > make ARCH=arm CROSS_COMPILE=arm-linux-gnu- -j 55 > > Notes: > 1. powerpc doesn't build for reasons unrelated to this series. > > 2. arm (32-bit) requires the fix to the SA2UL driver included > in this series. > > 3. arm (32-bit) and mips require increasing the following value > from 1024. That change is not included in the series. > CONFIG_FRAME_SIZE=2048 > > > Robert Elliott (10): > crypto: Kconfig - move mips entries to a submenu > crypto: Kconfig - move powerpc entries to a submenu > crypto: Kconfig - move s390 entries to a submenu > crypto: Kconfig - move sparc entries to a submenu > crypto: Kconfig - move x86 entries to a submenu > crypto: Kconfig - remove AES_ARM64 selection by SA2UL entry > crypto: Kconfig - move arm and arm64 menus to Crypto API page > crypto: Kconfig - sort the arm64 entries > crypto: Kconfig - sort the arm entries > crypto: Kconfig - add submenus What commit does this series apply to? - Eric
> -----Original Message----- > From: Eric Biggers <ebiggers@kernel.org> > Sent: Wednesday, August 17, 2022 9:48 PM > Subject: Re: [PATCH v2 00/10] crypto: Kconfig - simplify menus and help text > ... > > > > Robert Elliott (10): > > crypto: Kconfig - move mips entries to a submenu > > crypto: Kconfig - move powerpc entries to a submenu > > crypto: Kconfig - move s390 entries to a submenu > > crypto: Kconfig - move sparc entries to a submenu > > crypto: Kconfig - move x86 entries to a submenu > > crypto: Kconfig - remove AES_ARM64 selection by SA2UL entry > > crypto: Kconfig - move arm and arm64 menus to Crypto API page > > crypto: Kconfig - sort the arm64 entries > > crypto: Kconfig - sort the arm entries > > crypto: Kconfig - add submenus > > What commit does this series apply to? 5.19-rc7: edbaae5c2910 crypto: Kconfig - move mips entries to a submenu 57e81df8165b crypto: testmgr - make WARN prints consistent fa99961bb413 crypto: x86/sha512 - load based on CPU features 5b2fb3a1500d ghes_edac: fix intermittent warm reset hang 661204d2ad01 RDMA/irdma: Fix sleep from invalid context BUG 85bdff84e6fd RDMA/irdma: Do not advertise 1GB page size for x722 c24fa712938f gpiolib: cdev: Fix kernel doc for struct line 7f1d458de3ab Linux 5.19-rc7 I'll try including the git format-patch --base option next time.
On Thu, Aug 18, 2022 at 03:00:33AM +0000, Elliott, Robert (Servers) wrote: > > > > -----Original Message----- > > From: Eric Biggers <ebiggers@kernel.org> > > Sent: Wednesday, August 17, 2022 9:48 PM > > Subject: Re: [PATCH v2 00/10] crypto: Kconfig - simplify menus and help text > > > ... > > > > > > Robert Elliott (10): > > > crypto: Kconfig - move mips entries to a submenu > > > crypto: Kconfig - move powerpc entries to a submenu > > > crypto: Kconfig - move s390 entries to a submenu > > > crypto: Kconfig - move sparc entries to a submenu > > > crypto: Kconfig - move x86 entries to a submenu > > > crypto: Kconfig - remove AES_ARM64 selection by SA2UL entry > > > crypto: Kconfig - move arm and arm64 menus to Crypto API page > > > crypto: Kconfig - sort the arm64 entries > > > crypto: Kconfig - sort the arm entries > > > crypto: Kconfig - add submenus > > > > What commit does this series apply to? > > 5.19-rc7: > > edbaae5c2910 crypto: Kconfig - move mips entries to a submenu > 57e81df8165b crypto: testmgr - make WARN prints consistent > fa99961bb413 crypto: x86/sha512 - load based on CPU features > 5b2fb3a1500d ghes_edac: fix intermittent warm reset hang > 661204d2ad01 RDMA/irdma: Fix sleep from invalid context BUG > 85bdff84e6fd RDMA/irdma: Do not advertise 1GB page size for x722 > c24fa712938f gpiolib: cdev: Fix kernel doc for struct line > 7f1d458de3ab Linux 5.19-rc7 > > I'll try including the git format-patch --base option next time. > Thanks. v6.0-rc1 would be better as it is more up-to-date. - Eric
Improve the "make menuconfig" experience under the Cryptographic API page. The first of two patch series. This series extracts all the architecture-specific entries from crypto/Kconfig into arch/*/crypto/Kconfig A subsequent series will work on the entry titles and help text. Tested by running commands like these for arm, arm64, mips, powerpc, sparc, s390, and x86: make ARCH=arm O=build-arm allmodconfig cd build-arm make ARCH=arm menuconfig make ARCH=arm CROSS_COMPILE=arm-linux-gnu- -j 55 Notes: 1. powerpc doesn't build for reasons unrelated to this series. 2. arm (32-bit) requires the fix to the SA2UL driver included in this series. 3. arm (32-bit) and mips require increasing the following value from 1024. That change is not included in the series. CONFIG_FRAME_SIZE=2048 Robert Elliott (10): crypto: Kconfig - move mips entries to a submenu crypto: Kconfig - move powerpc entries to a submenu crypto: Kconfig - move s390 entries to a submenu crypto: Kconfig - move sparc entries to a submenu crypto: Kconfig - move x86 entries to a submenu crypto: Kconfig - remove AES_ARM64 selection by SA2UL entry crypto: Kconfig - move arm and arm64 menus to Crypto API page crypto: Kconfig - sort the arm64 entries crypto: Kconfig - sort the arm entries crypto: Kconfig - add submenus arch/arm/Kconfig | 4 - arch/arm/configs/exynos_defconfig | 1 - arch/arm/configs/milbeaut_m10v_defconfig | 1 - arch/arm/configs/multi_v7_defconfig | 1 - arch/arm/configs/omap2plus_defconfig | 1 - arch/arm/configs/pxa_defconfig | 1 - arch/arm/crypto/Kconfig | 125 ++- arch/arm64/Kconfig | 3 - arch/arm64/configs/defconfig | 1 - arch/arm64/crypto/Kconfig | 63 +- arch/mips/crypto/Kconfig | 60 ++ arch/powerpc/crypto/Kconfig | 77 ++ arch/s390/crypto/Kconfig | 120 +++ arch/sparc/crypto/Kconfig | 103 +++ arch/x86/crypto/Kconfig | 491 ++++++++++++ crypto/Kconfig | 964 +++-------------------- drivers/crypto/Kconfig | 2 - drivers/net/Kconfig | 2 - 18 files changed, 1029 insertions(+), 991 deletions(-) create mode 100644 arch/mips/crypto/Kconfig create mode 100644 arch/powerpc/crypto/Kconfig create mode 100644 arch/s390/crypto/Kconfig create mode 100644 arch/sparc/crypto/Kconfig create mode 100644 arch/x86/crypto/Kconfig