@@ -359,18 +359,18 @@ static void lkkbd_detection_done(struct lkkbd *lk)
*/
switch (lk->id[4]) {
case 1:
- strlcpy(lk->name, "DEC LK201 keyboard", sizeof(lk->name));
+ strscpy(lk->name, "DEC LK201 keyboard", sizeof(lk->name));
if (lk201_compose_is_alt)
lk->keycode[0xb1] = KEY_LEFTALT;
break;
case 2:
- strlcpy(lk->name, "DEC LK401 keyboard", sizeof(lk->name));
+ strscpy(lk->name, "DEC LK401 keyboard", sizeof(lk->name));
break;
default:
- strlcpy(lk->name, "Unknown DEC keyboard", sizeof(lk->name));
+ strscpy(lk->name, "Unknown DEC keyboard", sizeof(lk->name));
printk(KERN_ERR
"lkkbd: keyboard on %s is unknown, please report to "
"Jan-Benedict Glaw <jbglaw@lug-owl.de>\n", lk->phys);
@@ -626,7 +626,7 @@ static int lkkbd_connect(struct serio *serio, struct serio_driver *drv)
lk->ctrlclick_volume = ctrlclick_volume;
memcpy(lk->keycode, lkkbd_keycode, sizeof(lk->keycode));
- strlcpy(lk->name, "DEC LK keyboard", sizeof(lk->name));
+ strscpy(lk->name, "DEC LK keyboard", sizeof(lk->name));
snprintf(lk->phys, sizeof(lk->phys), "%s/input0", serio->phys);
input_dev->name = lk->name;
@@ -485,7 +485,7 @@ static int keyspan_probe(struct usb_interface *interface, const struct usb_devic
}
if (udev->manufacturer)
- strlcpy(remote->name, udev->manufacturer, sizeof(remote->name));
+ strscpy(remote->name, udev->manufacturer, sizeof(remote->name));
if (udev->product) {
if (udev->manufacturer)
@@ -1057,7 +1057,7 @@ void hgpk_module_init(void)
strlen(hgpk_mode_name));
if (hgpk_default_mode == HGPK_MODE_INVALID) {
hgpk_default_mode = HGPK_MODE_MOUSE;
- strlcpy(hgpk_mode_name, hgpk_mode_names[HGPK_MODE_MOUSE],
+ strscpy(hgpk_mode_name, hgpk_mode_names[HGPK_MODE_MOUSE],
sizeof(hgpk_mode_name));
}
}
@@ -715,8 +715,8 @@ static void synaptics_pt_create(struct psmouse *psmouse)
}
serio->id.type = SERIO_PS_PSTHRU;
- strlcpy(serio->name, "Synaptics pass-through", sizeof(serio->name));
- strlcpy(serio->phys, "synaptics-pt/serio0", sizeof(serio->phys));
+ strscpy(serio->name, "Synaptics pass-through", sizeof(serio->name));
+ strscpy(serio->phys, "synaptics-pt/serio0", sizeof(serio->phys));
serio->write = synaptics_pt_write;
serio->start = synaptics_pt_start;
serio->stop = synaptics_pt_stop;
@@ -354,7 +354,7 @@ static int synusb_probe(struct usb_interface *intf,
synusb->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
if (udev->manufacturer)
- strlcpy(synusb->name, udev->manufacturer,
+ strscpy(synusb->name, udev->manufacturer,
sizeof(synusb->name));
if (udev->product) {
@@ -138,12 +138,12 @@ static void vsxxxaa_detection_done(struct vsxxxaa *mouse)
{
switch (mouse->type) {
case 0x02:
- strlcpy(mouse->name, "DEC VSXXX-AA/-GA mouse",
+ strscpy(mouse->name, "DEC VSXXX-AA/-GA mouse",
sizeof(mouse->name));
break;
case 0x04:
- strlcpy(mouse->name, "DEC VSXXX-AB digitizer",
+ strscpy(mouse->name, "DEC VSXXX-AB digitizer",
sizeof(mouse->name));
break;
@@ -181,7 +181,7 @@ static int rmi_f03_register_pt(struct f03_data *f03)
serio->close = rmi_f03_pt_close;
serio->port_data = f03;
- strlcpy(serio->name, "RMI4 PS/2 pass-through", sizeof(serio->name));
+ strscpy(serio->name, "RMI4 PS/2 pass-through", sizeof(serio->name));
snprintf(serio->phys, sizeof(serio->phys), "%s/serio0",
dev_name(&f03->fn->dev));
serio->dev.parent = &f03->fn->dev;
@@ -390,8 +390,8 @@ static int rmi_f54_vidioc_querycap(struct file *file, void *priv,
{
struct f54_data *f54 = video_drvdata(file);
- strlcpy(cap->driver, F54_NAME, sizeof(cap->driver));
- strlcpy(cap->card, SYNAPTICS_INPUT_DEVICE_NAME, sizeof(cap->card));
+ strscpy(cap->driver, F54_NAME, sizeof(cap->driver));
+ strscpy(cap->card, SYNAPTICS_INPUT_DEVICE_NAME, sizeof(cap->card));
snprintf(cap->bus_info, sizeof(cap->bus_info),
"rmi4:%s", dev_name(&f54->fn->dev));
@@ -410,7 +410,7 @@ static int rmi_f54_vidioc_enum_input(struct file *file, void *priv,
i->type = V4L2_INPUT_TYPE_TOUCH;
- strlcpy(i->name, rmi_f54_report_type_names[reptype], sizeof(i->name));
+ strscpy(i->name, rmi_f54_report_type_names[reptype], sizeof(i->name));
return 0;
}
@@ -696,7 +696,7 @@ static int rmi_f54_probe(struct rmi_function *fn)
rmi_f54_set_input(f54, 0);
/* register video device */
- strlcpy(f54->v4l2.name, F54_NAME, sizeof(f54->v4l2.name));
+ strscpy(f54->v4l2.name, F54_NAME, sizeof(f54->v4l2.name));
ret = v4l2_device_register(&fn->dev, &f54->v4l2);
if (ret) {
dev_err(&fn->dev, "Unable to register video dev.\n");
@@ -110,8 +110,8 @@ static int altera_ps2_probe(struct platform_device *pdev)
serio->write = altera_ps2_write;
serio->open = altera_ps2_open;
serio->close = altera_ps2_close;
- strlcpy(serio->name, dev_name(&pdev->dev), sizeof(serio->name));
- strlcpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys));
+ strscpy(serio->name, dev_name(&pdev->dev), sizeof(serio->name));
+ strscpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys));
serio->port_data = ps2if;
serio->dev.parent = &pdev->dev;
ps2if->io = serio;
@@ -126,8 +126,8 @@ static int amba_kmi_probe(struct amba_device *dev,
io->write = amba_kmi_write;
io->open = amba_kmi_open;
io->close = amba_kmi_close;
- strlcpy(io->name, dev_name(&dev->dev), sizeof(io->name));
- strlcpy(io->phys, dev_name(&dev->dev), sizeof(io->phys));
+ strscpy(io->name, dev_name(&dev->dev), sizeof(io->name));
+ strscpy(io->phys, dev_name(&dev->dev), sizeof(io->phys));
io->port_data = kmi;
io->dev.parent = &dev->dev;
@@ -159,8 +159,8 @@ static int ams_delta_serio_init(struct platform_device *pdev)
serio->id.type = SERIO_8042;
serio->open = ams_delta_serio_open;
serio->close = ams_delta_serio_close;
- strlcpy(serio->name, "AMS DELTA keyboard adapter", sizeof(serio->name));
- strlcpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys));
+ strscpy(serio->name, "AMS DELTA keyboard adapter", sizeof(serio->name));
+ strscpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys));
serio->dev.parent = &pdev->dev;
serio->port_data = priv;
@@ -176,7 +176,7 @@ static int apbps2_of_probe(struct platform_device *ofdev)
priv->io->close = apbps2_close;
priv->io->write = apbps2_write;
priv->io->port_data = priv;
- strlcpy(priv->io->name, "APBPS2 PS/2", sizeof(priv->io->name));
+ strscpy(priv->io->name, "APBPS2 PS/2", sizeof(priv->io->name));
snprintf(priv->io->phys, sizeof(priv->io->phys),
"apbps2_%d", apbps2_idx++);
@@ -170,7 +170,7 @@ static int ct82c710_probe(struct platform_device *dev)
ct82c710_port->open = ct82c710_open;
ct82c710_port->close = ct82c710_close;
ct82c710_port->write = ct82c710_write;
- strlcpy(ct82c710_port->name, "C&T 82c710 mouse port",
+ strscpy(ct82c710_port->name, "C&T 82c710 mouse port",
sizeof(ct82c710_port->name));
snprintf(ct82c710_port->phys, sizeof(ct82c710_port->phys),
"isa%16llx/serio0", (unsigned long long)CT82C710_DATA);
@@ -361,7 +361,7 @@ static int __init gscps2_probe(struct parisc_device *dev)
snprintf(serio->name, sizeof(serio->name), "gsc-ps2-%s",
(ps2port->id == GSC_ID_KEYBOARD) ? "keyboard" : "mouse");
- strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
+ strscpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
serio->id.type = SERIO_8042;
serio->write = gscps2_write;
serio->open = gscps2_open;
@@ -334,9 +334,9 @@ static int hv_kbd_probe(struct hv_device *hv_dev,
hv_serio->dev.parent = &hv_dev->device;
hv_serio->id.type = SERIO_8042_XL;
hv_serio->port_data = kbd_dev;
- strlcpy(hv_serio->name, dev_name(&hv_dev->device),
+ strscpy(hv_serio->name, dev_name(&hv_dev->device),
sizeof(hv_serio->name));
- strlcpy(hv_serio->phys, dev_name(&hv_dev->device),
+ strscpy(hv_serio->phys, dev_name(&hv_dev->device),
sizeof(hv_serio->phys));
hv_serio->start = hv_kbd_start;
@@ -1300,7 +1300,7 @@ static char i8042_pnp_aux_name[32];
static void i8042_pnp_id_to_string(struct pnp_id *id, char *dst, int dst_size)
{
- strlcpy(dst, "PNP:", dst_size);
+ strscpy(dst, "PNP:", dst_size);
while (id) {
strlcat(dst, " ", dst_size);
@@ -1320,7 +1320,7 @@ static int i8042_pnp_kbd_probe(struct pnp_dev *dev, const struct pnp_device_id *
if (pnp_irq_valid(dev,0))
i8042_pnp_kbd_irq = pnp_irq(dev, 0);
- strlcpy(i8042_pnp_kbd_name, did->id, sizeof(i8042_pnp_kbd_name));
+ strscpy(i8042_pnp_kbd_name, did->id, sizeof(i8042_pnp_kbd_name));
if (strlen(pnp_dev_name(dev))) {
strlcat(i8042_pnp_kbd_name, ":", sizeof(i8042_pnp_kbd_name));
strlcat(i8042_pnp_kbd_name, pnp_dev_name(dev), sizeof(i8042_pnp_kbd_name));
@@ -1347,7 +1347,7 @@ static int i8042_pnp_aux_probe(struct pnp_dev *dev, const struct pnp_device_id *
if (pnp_irq_valid(dev, 0))
i8042_pnp_aux_irq = pnp_irq(dev, 0);
- strlcpy(i8042_pnp_aux_name, did->id, sizeof(i8042_pnp_aux_name));
+ strscpy(i8042_pnp_aux_name, did->id, sizeof(i8042_pnp_aux_name));
if (strlen(pnp_dev_name(dev))) {
strlcat(i8042_pnp_aux_name, ":", sizeof(i8042_pnp_aux_name));
strlcat(i8042_pnp_aux_name, pnp_dev_name(dev), sizeof(i8042_pnp_aux_name));
@@ -1341,9 +1341,9 @@ static int i8042_create_kbd_port(void)
serio->ps2_cmd_mutex = &i8042_mutex;
serio->port_data = port;
serio->dev.parent = &i8042_platform_device->dev;
- strlcpy(serio->name, "i8042 KBD port", sizeof(serio->name));
- strlcpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys));
- strlcpy(serio->firmware_id, i8042_kbd_firmware_id,
+ strscpy(serio->name, "i8042 KBD port", sizeof(serio->name));
+ strscpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys));
+ strscpy(serio->firmware_id, i8042_kbd_firmware_id,
sizeof(serio->firmware_id));
set_primary_fwnode(&serio->dev, i8042_kbd_fwnode);
@@ -1371,15 +1371,15 @@ static int i8042_create_aux_port(int idx)
serio->port_data = port;
serio->dev.parent = &i8042_platform_device->dev;
if (idx < 0) {
- strlcpy(serio->name, "i8042 AUX port", sizeof(serio->name));
- strlcpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys));
- strlcpy(serio->firmware_id, i8042_aux_firmware_id,
+ strscpy(serio->name, "i8042 AUX port", sizeof(serio->name));
+ strscpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys));
+ strscpy(serio->firmware_id, i8042_aux_firmware_id,
sizeof(serio->firmware_id));
serio->close = i8042_port_close;
} else {
snprintf(serio->name, sizeof(serio->name), "i8042 AUX%d port", idx);
snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, idx + 1);
- strlcpy(serio->firmware_id, i8042_aux_firmware_id,
+ strscpy(serio->firmware_id, i8042_aux_firmware_id,
sizeof(serio->firmware_id));
}
@@ -199,8 +199,8 @@ static int olpc_apsp_probe(struct platform_device *pdev)
kb_serio->close = olpc_apsp_close;
kb_serio->port_data = priv;
kb_serio->dev.parent = &pdev->dev;
- strlcpy(kb_serio->name, "sp keyboard", sizeof(kb_serio->name));
- strlcpy(kb_serio->phys, "sp/serio0", sizeof(kb_serio->phys));
+ strscpy(kb_serio->name, "sp keyboard", sizeof(kb_serio->name));
+ strscpy(kb_serio->phys, "sp/serio0", sizeof(kb_serio->phys));
priv->kbio = kb_serio;
serio_register_port(kb_serio);
@@ -216,8 +216,8 @@ static int olpc_apsp_probe(struct platform_device *pdev)
pad_serio->close = olpc_apsp_close;
pad_serio->port_data = priv;
pad_serio->dev.parent = &pdev->dev;
- strlcpy(pad_serio->name, "sp touchpad", sizeof(pad_serio->name));
- strlcpy(pad_serio->phys, "sp/serio1", sizeof(pad_serio->phys));
+ strscpy(pad_serio->name, "sp touchpad", sizeof(pad_serio->name));
+ strscpy(pad_serio->phys, "sp/serio1", sizeof(pad_serio->phys));
priv->padio = pad_serio;
serio_register_port(pad_serio);
@@ -169,7 +169,7 @@ static struct serio *parkbd_allocate_serio(void)
if (serio) {
serio->id.type = parkbd_mode;
serio->write = parkbd_write;
- strlcpy(serio->name, "PARKBD AT/XT keyboard adapter", sizeof(serio->name));
+ strscpy(serio->name, "PARKBD AT/XT keyboard adapter", sizeof(serio->name));
snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", parkbd_dev->port->name);
}
@@ -149,8 +149,8 @@ static int pcips2_probe(struct pci_dev *dev, const struct pci_device_id *id)
serio->write = pcips2_write;
serio->open = pcips2_open;
serio->close = pcips2_close;
- strlcpy(serio->name, pci_name(dev), sizeof(serio->name));
- strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
+ strscpy(serio->name, pci_name(dev), sizeof(serio->name));
+ strscpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
serio->port_data = ps2if;
serio->dev.parent = &dev->dev;
ps2if->io = serio;
@@ -449,8 +449,8 @@ static int ps2_gpio_probe(struct platform_device *pdev)
serio->write = drvdata->write_enable ? ps2_gpio_write : NULL;
serio->port_data = drvdata;
serio->dev.parent = dev;
- strlcpy(serio->name, dev_name(dev), sizeof(serio->name));
- strlcpy(serio->phys, dev_name(dev), sizeof(serio->phys));
+ strscpy(serio->name, dev_name(dev), sizeof(serio->name));
+ strscpy(serio->phys, dev_name(dev), sizeof(serio->phys));
drvdata->serio = serio;
drvdata->dev = dev;
@@ -131,7 +131,7 @@ static int ps2mult_create_port(struct ps2mult *psm, int i)
if (!serio)
return -ENOMEM;
- strlcpy(serio->name, "TQC PS/2 Multiplexer", sizeof(serio->name));
+ strscpy(serio->name, "TQC PS/2 Multiplexer", sizeof(serio->name));
snprintf(serio->phys, sizeof(serio->phys),
"%s/port%d", mx_serio->phys, i);
serio->id.type = SERIO_8042;
@@ -126,8 +126,8 @@ static int q40kbd_probe(struct platform_device *pdev)
port->close = q40kbd_close;
port->port_data = q40kbd;
port->dev.parent = &pdev->dev;
- strlcpy(port->name, "Q40 Kbd Port", sizeof(port->name));
- strlcpy(port->phys, "Q40", sizeof(port->phys));
+ strscpy(port->name, "Q40 Kbd Port", sizeof(port->name));
+ strscpy(port->phys, "Q40", sizeof(port->phys));
q40kbd_stop();
@@ -128,8 +128,8 @@ static int rpckbd_probe(struct platform_device *dev)
serio->close = rpckbd_close;
serio->dev.parent = &dev->dev;
serio->port_data = rpckbd;
- strlcpy(serio->name, "RiscPC PS/2 kbd port", sizeof(serio->name));
- strlcpy(serio->phys, "rpckbd/serio0", sizeof(serio->phys));
+ strscpy(serio->name, "RiscPC PS/2 kbd port", sizeof(serio->name));
+ strscpy(serio->phys, "rpckbd/serio0", sizeof(serio->phys));
platform_set_drvdata(dev, serio);
serio_register_port(serio);
@@ -267,8 +267,8 @@ static int ps2_probe(struct sa1111_dev *dev)
serio->write = ps2_write;
serio->open = ps2_open;
serio->close = ps2_close;
- strlcpy(serio->name, dev_name(&dev->dev), sizeof(serio->name));
- strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
+ strscpy(serio->name, dev_name(&dev->dev), sizeof(serio->name));
+ strscpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
serio->port_data = ps2if;
serio->dev.parent = &dev->dev;
ps2if->io = serio;
@@ -171,7 +171,7 @@ static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file,
if (!serio)
return -ENOMEM;
- strlcpy(serio->name, "Serial port", sizeof(serio->name));
+ strscpy(serio->name, "Serial port", sizeof(serio->name));
snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", tty_name(tty));
serio->id = serport->id;
serio->id.type = SERIO_RS232;
@@ -256,8 +256,8 @@ static int sun4i_ps2_probe(struct platform_device *pdev)
serio->close = sun4i_ps2_close;
serio->port_data = drvdata;
serio->dev.parent = dev;
- strlcpy(serio->name, dev_name(dev), sizeof(serio->name));
- strlcpy(serio->phys, dev_name(dev), sizeof(serio->phys));
+ strscpy(serio->name, dev_name(dev), sizeof(serio->name));
+ strscpy(serio->phys, dev_name(dev), sizeof(serio->phys));
/* shutoff interrupt */
writel(0, drvdata->reg_base + PS2_REG_GCTL);
@@ -155,7 +155,7 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
acecad->input = input_dev;
if (dev->manufacturer)
- strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name));
+ strscpy(acecad->name, dev->manufacturer, sizeof(acecad->name));
if (dev->product) {
if (dev->manufacturer)
@@ -356,7 +356,7 @@ static int hanwang_probe(struct usb_interface *intf, const struct usb_device_id
usb_make_path(dev, hanwang->phys, sizeof(hanwang->phys));
strlcat(hanwang->phys, "/input0", sizeof(hanwang->phys));
- strlcpy(hanwang->name, hanwang->features->name, sizeof(hanwang->name));
+ strscpy(hanwang->name, hanwang->features->name, sizeof(hanwang->name));
input_dev->name = hanwang->name;
input_dev->phys = hanwang->phys;
usb_to_input_id(dev, &input_dev->id);
@@ -319,7 +319,7 @@ static int pegasus_probe(struct usb_interface *intf,
pegasus->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
if (dev->manufacturer)
- strlcpy(pegasus->name, dev->manufacturer,
+ strscpy(pegasus->name, dev->manufacturer,
sizeof(pegasus->name));
if (dev->product) {
@@ -2497,8 +2497,8 @@ static int mxt_vidioc_querycap(struct file *file, void *priv,
{
struct mxt_data *data = video_drvdata(file);
- strlcpy(cap->driver, "atmel_mxt_ts", sizeof(cap->driver));
- strlcpy(cap->card, "atmel_mxt_ts touch", sizeof(cap->card));
+ strscpy(cap->driver, "atmel_mxt_ts", sizeof(cap->driver));
+ strscpy(cap->card, "atmel_mxt_ts touch", sizeof(cap->card));
snprintf(cap->bus_info, sizeof(cap->bus_info),
"I2C:%s", dev_name(&data->client->dev));
return 0;
@@ -2514,11 +2514,11 @@ static int mxt_vidioc_enum_input(struct file *file, void *priv,
switch (i->index) {
case MXT_V4L_INPUT_REFS:
- strlcpy(i->name, "Mutual Capacitance References",
+ strscpy(i->name, "Mutual Capacitance References",
sizeof(i->name));
break;
case MXT_V4L_INPUT_DELTAS:
- strlcpy(i->name, "Mutual Capacitance Deltas", sizeof(i->name));
+ strscpy(i->name, "Mutual Capacitance Deltas", sizeof(i->name));
break;
}
@@ -912,8 +912,8 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client,
p = strchr(rdbuf, '*');
if (p)
*p++ = '\0';
- strlcpy(model_name, rdbuf + 1, EDT_NAME_LEN);
- strlcpy(fw_version, p ? p : "", EDT_NAME_LEN);
+ strscpy(model_name, rdbuf + 1, EDT_NAME_LEN);
+ strscpy(fw_version, p ? p : "", EDT_NAME_LEN);
} else if (!strncasecmp(rdbuf, "EP0", 3)) {
tsdata->version = EDT_M12;
@@ -926,8 +926,8 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client,
p = strchr(rdbuf, '*');
if (p)
*p++ = '\0';
- strlcpy(model_name, rdbuf, EDT_NAME_LEN);
- strlcpy(fw_version, p ? p : "", EDT_NAME_LEN);
+ strscpy(model_name, rdbuf, EDT_NAME_LEN);
+ strscpy(fw_version, p ? p : "", EDT_NAME_LEN);
} else {
/* If it is not an EDT M06/M12 touchscreen, then the model
* detection is a bit hairy. The different ft5x06
@@ -945,7 +945,7 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client,
if (error)
return error;
- strlcpy(fw_version, rdbuf, 2);
+ strscpy(fw_version, rdbuf, 2);
error = edt_ft5x06_ts_readwrite(client, 1, "\xA8",
1, rdbuf);
@@ -981,7 +981,7 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client,
1, rdbuf);
if (error)
return error;
- strlcpy(fw_version, rdbuf, 1);
+ strscpy(fw_version, rdbuf, 1);
snprintf(model_name, EDT_NAME_LEN,
"EVERVISION-FT5726NEi");
break;
@@ -939,8 +939,8 @@ static int sur40_vidioc_querycap(struct file *file, void *priv,
{
struct sur40_state *sur40 = video_drvdata(file);
- strlcpy(cap->driver, DRIVER_SHORT, sizeof(cap->driver));
- strlcpy(cap->card, DRIVER_LONG, sizeof(cap->card));
+ strscpy(cap->driver, DRIVER_SHORT, sizeof(cap->driver));
+ strscpy(cap->card, DRIVER_LONG, sizeof(cap->card));
usb_make_path(sur40->usbdev, cap->bus_info, sizeof(cap->bus_info));
return 0;
}
@@ -952,7 +952,7 @@ static int sur40_vidioc_enum_input(struct file *file, void *priv,
return -EINVAL;
i->type = V4L2_INPUT_TYPE_TOUCH;
i->std = V4L2_STD_UNKNOWN;
- strlcpy(i->name, "In-Cell Sensor", sizeof(i->name));
+ strscpy(i->name, "In-Cell Sensor", sizeof(i->name));
i->capabilities = 0;
return 0;
}
@@ -1708,7 +1708,7 @@ static int usbtouch_probe(struct usb_interface *intf,
usbtouch->input = input_dev;
if (udev->manufacturer)
- strlcpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name));
+ strscpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name));
if (udev->product) {
if (udev->manufacturer)
@@ -625,7 +625,7 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv)
/* For backwards-compatibility we compose the basename based on
* capabilities and then just append the tool type
*/
- strlcpy(basename, "Wacom Serial", sizeof(basename));
+ strscpy(basename, "Wacom Serial", sizeof(basename));
err_pen = w8001_setup_pen(w8001, basename, sizeof(basename));
err_touch = w8001_setup_touch(w8001, basename, sizeof(basename));
@@ -635,7 +635,7 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv)
}
if (!err_pen) {
- strlcpy(w8001->pen_name, basename, sizeof(w8001->pen_name));
+ strscpy(w8001->pen_name, basename, sizeof(w8001->pen_name));
strlcat(w8001->pen_name, " Pen", sizeof(w8001->pen_name));
input_dev_pen->name = w8001->pen_name;
@@ -651,7 +651,7 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv)
}
if (!err_touch) {
- strlcpy(w8001->touch_name, basename, sizeof(w8001->touch_name));
+ strscpy(w8001->touch_name, basename, sizeof(w8001->touch_name));
strlcat(w8001->touch_name, " Finger",
sizeof(w8001->touch_name));
input_dev_touch->name = w8001->touch_name;
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- drivers/input/keyboard/lkkbd.c | 8 ++++---- drivers/input/misc/keyspan_remote.c | 2 +- drivers/input/mouse/hgpk.c | 2 +- drivers/input/mouse/synaptics.c | 4 ++-- drivers/input/mouse/synaptics_usb.c | 2 +- drivers/input/mouse/vsxxxaa.c | 4 ++-- drivers/input/rmi4/rmi_f03.c | 2 +- drivers/input/rmi4/rmi_f54.c | 8 ++++---- drivers/input/serio/altera_ps2.c | 4 ++-- drivers/input/serio/ambakmi.c | 4 ++-- drivers/input/serio/ams_delta_serio.c | 4 ++-- drivers/input/serio/apbps2.c | 2 +- drivers/input/serio/ct82c710.c | 2 +- drivers/input/serio/gscps2.c | 2 +- drivers/input/serio/hyperv-keyboard.c | 4 ++-- drivers/input/serio/i8042-x86ia64io.h | 6 +++--- drivers/input/serio/i8042.c | 14 +++++++------- drivers/input/serio/olpc_apsp.c | 8 ++++---- drivers/input/serio/parkbd.c | 2 +- drivers/input/serio/pcips2.c | 4 ++-- drivers/input/serio/ps2-gpio.c | 4 ++-- drivers/input/serio/ps2mult.c | 2 +- drivers/input/serio/q40kbd.c | 4 ++-- drivers/input/serio/rpckbd.c | 4 ++-- drivers/input/serio/sa1111ps2.c | 4 ++-- drivers/input/serio/serport.c | 2 +- drivers/input/serio/sun4i-ps2.c | 4 ++-- drivers/input/tablet/acecad.c | 2 +- drivers/input/tablet/hanwang.c | 2 +- drivers/input/tablet/pegasus_notetaker.c | 2 +- drivers/input/touchscreen/atmel_mxt_ts.c | 8 ++++---- drivers/input/touchscreen/edt-ft5x06.c | 12 ++++++------ drivers/input/touchscreen/sur40.c | 6 +++--- drivers/input/touchscreen/usbtouchscreen.c | 2 +- drivers/input/touchscreen/wacom_w8001.c | 6 +++--- 35 files changed, 76 insertions(+), 76 deletions(-)