| Message ID | 20220820224538.59489-5-lynxis@fe80.eu (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | net: mediatek: sgmii: add support to change interface parameter while running | expand |
On Sun, Aug 21, 2022 at 12:45:38AM +0200, Alexander Couzens wrote: > The non auto-negotiating code path is setting the correct speed for the > interface. Ensure auto-negotiation code path is doing it as well. > > Signed-off-by: Alexander Couzens <lynxis@fe80.eu> > --- > drivers/net/ethernet/mediatek/mtk_sgmii.c | 11 +++++++++-- > 1 file changed, 9 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/ethernet/mediatek/mtk_sgmii.c b/drivers/net/ethernet/mediatek/mtk_sgmii.c > index aa69baf1a42f..75de2c73a048 100644 > --- a/drivers/net/ethernet/mediatek/mtk_sgmii.c > +++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c > @@ -21,13 +21,20 @@ static struct mtk_pcs *pcs_to_mtk_pcs(struct phylink_pcs *pcs) > } > > /* For SGMII interface mode */ > -static int mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs) > +static int mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs, phy_interface_t interface) > { > unsigned int val; > > /* PHYA power down */ > regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, SGMII_PHYA_PWD); > > + /* Set SGMII phy speed */ > + regmap_read(mpcs->regmap, mpcs->ana_rgc3, &val); > + val &= ~RG_PHY_SPEED_MASK; > + if (interface == PHY_INTERFACE_MODE_2500BASEX) > + val |= RG_PHY_SPEED_3_125G; > + regmap_write(mpcs->regmap, mpcs->ana_rgc3, val); > + It looks to me like, after this commit, the initial part of mtk_pcs_setup_mode_an() and mtk_pcs_setup_mode_force() are identical. Also, I think that the tail of each of these functions is also identical. So, would it make sense for a final patch to tidy this code up? > /* Setup the link timer and QPHY power up inside SGMIISYS */ > regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, > SGMII_LINK_TIMER_DEFAULT); > @@ -100,7 +107,7 @@ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode, > if (interface != PHY_INTERFACE_MODE_SGMII) > err = mtk_pcs_setup_mode_force(mpcs, interface); > else if (phylink_autoneg_inband(mode)) > - err = mtk_pcs_setup_mode_an(mpcs); > + err = mtk_pcs_setup_mode_an(mpcs, interface); What is the situation when PHY_INTERFACE_MODE_SGMII is being used, but we're not using inband mode? Right now, we don't do any configuration of this block, and that seems rather wrong.
diff --git a/drivers/net/ethernet/mediatek/mtk_sgmii.c b/drivers/net/ethernet/mediatek/mtk_sgmii.c index aa69baf1a42f..75de2c73a048 100644 --- a/drivers/net/ethernet/mediatek/mtk_sgmii.c +++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c @@ -21,13 +21,20 @@ static struct mtk_pcs *pcs_to_mtk_pcs(struct phylink_pcs *pcs) } /* For SGMII interface mode */ -static int mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs) +static int mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs, phy_interface_t interface) { unsigned int val; /* PHYA power down */ regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, SGMII_PHYA_PWD); + /* Set SGMII phy speed */ + regmap_read(mpcs->regmap, mpcs->ana_rgc3, &val); + val &= ~RG_PHY_SPEED_MASK; + if (interface == PHY_INTERFACE_MODE_2500BASEX) + val |= RG_PHY_SPEED_3_125G; + regmap_write(mpcs->regmap, mpcs->ana_rgc3, val); + /* Setup the link timer and QPHY power up inside SGMIISYS */ regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, SGMII_LINK_TIMER_DEFAULT); @@ -100,7 +107,7 @@ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode, if (interface != PHY_INTERFACE_MODE_SGMII) err = mtk_pcs_setup_mode_force(mpcs, interface); else if (phylink_autoneg_inband(mode)) - err = mtk_pcs_setup_mode_an(mpcs); + err = mtk_pcs_setup_mode_an(mpcs, interface); return err; }
The non auto-negotiating code path is setting the correct speed for the interface. Ensure auto-negotiation code path is doing it as well. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> --- drivers/net/ethernet/mediatek/mtk_sgmii.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)