| Message ID | 20220822224355.11753-2-shentey@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | QOM'ify VT82xx devices | expand |
On Tue, 23 Aug 2022, Bernhard Beschow wrote: > The object creation now happens in chip-specific init methods which > allows the realize methods to be consolidated into one method. Shifting > the logic into the init methods has the addidional advantage that the > parent object's init methods are called implicitly. This and later patches titled "QOM'ify" don't do what I understand on QOMifying which is turining an old device model into a QOM object. These devices are already QOMified, what's really done here is that they are moved to the ViaISAState or embedded into it and created as part of the south bridge rather then individually by the boards. Either my understanding of what QOMify means is wrong or these patches are misnamed. Technically via_isa_realize() is the realize method of the abstract TYPE_VIA_ISA class which were overriden by the subclasses but since QOM does not call overridden methods implicitly this had to be explicitly called in the overriding realize methods of the subclasses. Now that we don't have to ovverride the method maybe it could be set once on the VIA_ISA class then it may work that way but as it's done here is also OK maybe as a reminder that this super class method should be called by any overriding method if one's added in the future for some reason. Regards, BALATON Zoltan > Signed-off-by: Bernhard Beschow <shentey@gmail.com> > --- > hw/isa/vt82c686.c | 33 ++++++++++++++++++--------------- > 1 file changed, 18 insertions(+), 15 deletions(-) > > diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c > index 8f656251b8..0217c98fe4 100644 > --- a/hw/isa/vt82c686.c > +++ b/hw/isa/vt82c686.c > @@ -544,7 +544,7 @@ struct ViaISAState { > qemu_irq cpu_intr; > qemu_irq *isa_irqs; > ISABus *isa_bus; > - ViaSuperIOState *via_sio; > + ViaSuperIOState via_sio; > }; > > static const VMStateDescription vmstate_via = { > @@ -602,6 +602,11 @@ static void via_isa_realize(PCIDevice *d, Error **errp) > d->wmask[i] = 0; > } > } > + > + /* Super I/O */ > + if (!qdev_realize(DEVICE(&s->via_sio), BUS(s->isa_bus), errp)) { > + return; > + } > } > > /* TYPE_VT82C686B_ISA */ > @@ -615,7 +620,7 @@ static void vt82c686b_write_config(PCIDevice *d, uint32_t addr, > pci_default_write_config(d, addr, val, len); > if (addr == 0x85) { > /* BIT(1): enable or disable superio config io ports */ > - via_superio_io_enable(s->via_sio, val & BIT(1)); > + via_superio_io_enable(&s->via_sio, val & BIT(1)); > } > } > > @@ -639,13 +644,11 @@ static void vt82c686b_isa_reset(DeviceState *dev) > pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */ > } > > -static void vt82c686b_realize(PCIDevice *d, Error **errp) > +static void vt82c686b_init(Object *obj) > { > - ViaISAState *s = VIA_ISA(d); > + ViaISAState *s = VIA_ISA(obj); > > - via_isa_realize(d, errp); > - s->via_sio = VIA_SUPERIO(isa_create_simple(s->isa_bus, > - TYPE_VT82C686B_SUPERIO)); > + object_initialize_child(obj, "sio", &s->via_sio, TYPE_VT82C686B_SUPERIO); > } > > static void vt82c686b_class_init(ObjectClass *klass, void *data) > @@ -653,7 +656,7 @@ static void vt82c686b_class_init(ObjectClass *klass, void *data) > DeviceClass *dc = DEVICE_CLASS(klass); > PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); > > - k->realize = vt82c686b_realize; > + k->realize = via_isa_realize; > k->config_write = vt82c686b_write_config; > k->vendor_id = PCI_VENDOR_ID_VIA; > k->device_id = PCI_DEVICE_ID_VIA_82C686B_ISA; > @@ -670,6 +673,7 @@ static const TypeInfo vt82c686b_isa_info = { > .name = TYPE_VT82C686B_ISA, > .parent = TYPE_VIA_ISA, > .instance_size = sizeof(ViaISAState), > + .instance_init = vt82c686b_init, > .class_init = vt82c686b_class_init, > }; > > @@ -684,7 +688,7 @@ static void vt8231_write_config(PCIDevice *d, uint32_t addr, > pci_default_write_config(d, addr, val, len); > if (addr == 0x50) { > /* BIT(2): enable or disable superio config io ports */ > - via_superio_io_enable(s->via_sio, val & BIT(2)); > + via_superio_io_enable(&s->via_sio, val & BIT(2)); > } > } > > @@ -703,13 +707,11 @@ static void vt8231_isa_reset(DeviceState *dev) > pci_conf[0x6b] = 0x01; /* Fast IR I/O Base */ > } > > -static void vt8231_realize(PCIDevice *d, Error **errp) > +static void vt8231_init(Object *obj) > { > - ViaISAState *s = VIA_ISA(d); > + ViaISAState *s = VIA_ISA(obj); > > - via_isa_realize(d, errp); > - s->via_sio = VIA_SUPERIO(isa_create_simple(s->isa_bus, > - TYPE_VT8231_SUPERIO)); > + object_initialize_child(obj, "sio", &s->via_sio, TYPE_VT8231_SUPERIO); > } > > static void vt8231_class_init(ObjectClass *klass, void *data) > @@ -717,7 +719,7 @@ static void vt8231_class_init(ObjectClass *klass, void *data) > DeviceClass *dc = DEVICE_CLASS(klass); > PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); > > - k->realize = vt8231_realize; > + k->realize = via_isa_realize; > k->config_write = vt8231_write_config; > k->vendor_id = PCI_VENDOR_ID_VIA; > k->device_id = PCI_DEVICE_ID_VIA_8231_ISA; > @@ -734,6 +736,7 @@ static const TypeInfo vt8231_isa_info = { > .name = TYPE_VT8231_ISA, > .parent = TYPE_VIA_ISA, > .instance_size = sizeof(ViaISAState), > + .instance_init = vt8231_init, > .class_init = vt8231_class_init, > }; > >
On Tue, Aug 23, 2022 at 2:35 AM BALATON Zoltan <balaton@eik.bme.hu> wrote: > On Tue, 23 Aug 2022, Bernhard Beschow wrote: > > The object creation now happens in chip-specific init methods which > > allows the realize methods to be consolidated into one method. Shifting > > the logic into the init methods has the addidional advantage that the > > parent object's init methods are called implicitly. > > This and later patches titled "QOM'ify" don't do what I understand on > QOMifying which is turining an old device model into a QOM object. These > devices are already QOMified, what's really done here is that they are > moved to the ViaISAState or embedded into it and created as part of the > south bridge rather then individually by the boards. Either my > understanding of what QOMify means is wrong or these patches are misnamed. > I think your understanding is correct. Peter refers to it as the embed-the-device-struct style [1] which I can take as inspiration for renaming my patches in v2. Technically via_isa_realize() is the realize method of the abstract > TYPE_VIA_ISA class which were overriden by the subclasses but since QOM > does not call overridden methods implicitly this had to be explicitly > called in the overriding realize methods of the subclasses. Now that we > don't have to ovverride the method maybe it could be set once on the > VIA_ISA class then it may work that way but as it's done here is also OK > maybe as a reminder that this super class method should be called by any > overriding method if one's added in the future for some reason. > Right. This would involve moving some code around and creating a class struct. Do you think it's worth it? Best regards, Bernhard [1] http://patchwork.ozlabs.org/project/qemu-devel/patch/20220205175913.31738-2-shentey@gmail.com/ Regards, > BALATON Zoltan > > > Signed-off-by: Bernhard Beschow <shentey@gmail.com> > > --- > > hw/isa/vt82c686.c | 33 ++++++++++++++++++--------------- > > 1 file changed, 18 insertions(+), 15 deletions(-) > > > > diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c > > index 8f656251b8..0217c98fe4 100644 > > --- a/hw/isa/vt82c686.c > > +++ b/hw/isa/vt82c686.c > > @@ -544,7 +544,7 @@ struct ViaISAState { > > qemu_irq cpu_intr; > > qemu_irq *isa_irqs; > > ISABus *isa_bus; > > - ViaSuperIOState *via_sio; > > + ViaSuperIOState via_sio; > > }; > > > > static const VMStateDescription vmstate_via = { > > @@ -602,6 +602,11 @@ static void via_isa_realize(PCIDevice *d, Error > **errp) > > d->wmask[i] = 0; > > } > > } > > + > > + /* Super I/O */ > > + if (!qdev_realize(DEVICE(&s->via_sio), BUS(s->isa_bus), errp)) { > > + return; > > + } > > } > > > > /* TYPE_VT82C686B_ISA */ > > @@ -615,7 +620,7 @@ static void vt82c686b_write_config(PCIDevice *d, > uint32_t addr, > > pci_default_write_config(d, addr, val, len); > > if (addr == 0x85) { > > /* BIT(1): enable or disable superio config io ports */ > > - via_superio_io_enable(s->via_sio, val & BIT(1)); > > + via_superio_io_enable(&s->via_sio, val & BIT(1)); > > } > > } > > > > @@ -639,13 +644,11 @@ static void vt82c686b_isa_reset(DeviceState *dev) > > pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */ > > } > > > > -static void vt82c686b_realize(PCIDevice *d, Error **errp) > > +static void vt82c686b_init(Object *obj) > > { > > - ViaISAState *s = VIA_ISA(d); > > + ViaISAState *s = VIA_ISA(obj); > > > > - via_isa_realize(d, errp); > > - s->via_sio = VIA_SUPERIO(isa_create_simple(s->isa_bus, > > - TYPE_VT82C686B_SUPERIO)); > > + object_initialize_child(obj, "sio", &s->via_sio, > TYPE_VT82C686B_SUPERIO); > > } > > > > static void vt82c686b_class_init(ObjectClass *klass, void *data) > > @@ -653,7 +656,7 @@ static void vt82c686b_class_init(ObjectClass *klass, > void *data) > > DeviceClass *dc = DEVICE_CLASS(klass); > > PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); > > > > - k->realize = vt82c686b_realize; > > + k->realize = via_isa_realize; > > k->config_write = vt82c686b_write_config; > > k->vendor_id = PCI_VENDOR_ID_VIA; > > k->device_id = PCI_DEVICE_ID_VIA_82C686B_ISA; > > @@ -670,6 +673,7 @@ static const TypeInfo vt82c686b_isa_info = { > > .name = TYPE_VT82C686B_ISA, > > .parent = TYPE_VIA_ISA, > > .instance_size = sizeof(ViaISAState), > > + .instance_init = vt82c686b_init, > > .class_init = vt82c686b_class_init, > > }; > > > > @@ -684,7 +688,7 @@ static void vt8231_write_config(PCIDevice *d, > uint32_t addr, > > pci_default_write_config(d, addr, val, len); > > if (addr == 0x50) { > > /* BIT(2): enable or disable superio config io ports */ > > - via_superio_io_enable(s->via_sio, val & BIT(2)); > > + via_superio_io_enable(&s->via_sio, val & BIT(2)); > > } > > } > > > > @@ -703,13 +707,11 @@ static void vt8231_isa_reset(DeviceState *dev) > > pci_conf[0x6b] = 0x01; /* Fast IR I/O Base */ > > } > > > > -static void vt8231_realize(PCIDevice *d, Error **errp) > > +static void vt8231_init(Object *obj) > > { > > - ViaISAState *s = VIA_ISA(d); > > + ViaISAState *s = VIA_ISA(obj); > > > > - via_isa_realize(d, errp); > > - s->via_sio = VIA_SUPERIO(isa_create_simple(s->isa_bus, > > - TYPE_VT8231_SUPERIO)); > > + object_initialize_child(obj, "sio", &s->via_sio, > TYPE_VT8231_SUPERIO); > > } > > > > static void vt8231_class_init(ObjectClass *klass, void *data) > > @@ -717,7 +719,7 @@ static void vt8231_class_init(ObjectClass *klass, > void *data) > > DeviceClass *dc = DEVICE_CLASS(klass); > > PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); > > > > - k->realize = vt8231_realize; > > + k->realize = via_isa_realize; > > k->config_write = vt8231_write_config; > > k->vendor_id = PCI_VENDOR_ID_VIA; > > k->device_id = PCI_DEVICE_ID_VIA_8231_ISA; > > @@ -734,6 +736,7 @@ static const TypeInfo vt8231_isa_info = { > > .name = TYPE_VT8231_ISA, > > .parent = TYPE_VIA_ISA, > > .instance_size = sizeof(ViaISAState), > > + .instance_init = vt8231_init, > > .class_init = vt8231_class_init, > > }; > > > > >
On Tue, 23 Aug 2022, Bernhard Beschow wrote: > On Tue, Aug 23, 2022 at 2:35 AM BALATON Zoltan <balaton@eik.bme.hu> wrote: > >> On Tue, 23 Aug 2022, Bernhard Beschow wrote: >>> The object creation now happens in chip-specific init methods which >>> allows the realize methods to be consolidated into one method. Shifting >>> the logic into the init methods has the addidional advantage that the >>> parent object's init methods are called implicitly. >> >> This and later patches titled "QOM'ify" don't do what I understand on >> QOMifying which is turining an old device model into a QOM object. These >> devices are already QOMified, what's really done here is that they are >> moved to the ViaISAState or embedded into it and created as part of the >> south bridge rather then individually by the boards. Either my >> understanding of what QOMify means is wrong or these patches are misnamed. >> > > I think your understanding is correct. Peter refers to it as the > embed-the-device-struct style [1] which I can take as inspiration for > renaming my patches in v2. > > Technically via_isa_realize() is the realize method of the abstract >> TYPE_VIA_ISA class which were overriden by the subclasses but since QOM >> does not call overridden methods implicitly this had to be explicitly >> called in the overriding realize methods of the subclasses. Now that we >> don't have to ovverride the method maybe it could be set once on the >> VIA_ISA class then it may work that way but as it's done here is also OK >> maybe as a reminder that this super class method should be called by any >> overriding method if one's added in the future for some reason. >> > > Right. This would involve moving some code around and creating a class > struct. Do you think it's worth it? You mean a class_init func to assign realize as the class struct via_isa_info already exists. But yes this would need to be moved after via_isa_realize then. As I wrote above I don't think this is worth it, especially becuase if in the future a realize method was re-added to the subclasses then it's easy to forget to revert this and call the superclass method so assigning via_isa_realize to the subclass as done here is OK and I can think of it as a reminder to call this method when overriding it. Also with the added class_init func it's shorter this way even if slightly mixing different objects. So in the end I'm OK with this as it is. Regards, BALATON Zoltan > Best regards, > Bernhard > > [1] > http://patchwork.ozlabs.org/project/qemu-devel/patch/20220205175913.31738-2-shentey@gmail.com/ > > Regards, >> BALATON Zoltan >> >>> Signed-off-by: Bernhard Beschow <shentey@gmail.com> >>> --- >>> hw/isa/vt82c686.c | 33 ++++++++++++++++++--------------- >>> 1 file changed, 18 insertions(+), 15 deletions(-) >>> >>> diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c >>> index 8f656251b8..0217c98fe4 100644 >>> --- a/hw/isa/vt82c686.c >>> +++ b/hw/isa/vt82c686.c >>> @@ -544,7 +544,7 @@ struct ViaISAState { >>> qemu_irq cpu_intr; >>> qemu_irq *isa_irqs; >>> ISABus *isa_bus; >>> - ViaSuperIOState *via_sio; >>> + ViaSuperIOState via_sio; >>> }; >>> >>> static const VMStateDescription vmstate_via = { >>> @@ -602,6 +602,11 @@ static void via_isa_realize(PCIDevice *d, Error >> **errp) >>> d->wmask[i] = 0; >>> } >>> } >>> + >>> + /* Super I/O */ >>> + if (!qdev_realize(DEVICE(&s->via_sio), BUS(s->isa_bus), errp)) { >>> + return; >>> + } >>> } >>> >>> /* TYPE_VT82C686B_ISA */ >>> @@ -615,7 +620,7 @@ static void vt82c686b_write_config(PCIDevice *d, >> uint32_t addr, >>> pci_default_write_config(d, addr, val, len); >>> if (addr == 0x85) { >>> /* BIT(1): enable or disable superio config io ports */ >>> - via_superio_io_enable(s->via_sio, val & BIT(1)); >>> + via_superio_io_enable(&s->via_sio, val & BIT(1)); >>> } >>> } >>> >>> @@ -639,13 +644,11 @@ static void vt82c686b_isa_reset(DeviceState *dev) >>> pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */ >>> } >>> >>> -static void vt82c686b_realize(PCIDevice *d, Error **errp) >>> +static void vt82c686b_init(Object *obj) >>> { >>> - ViaISAState *s = VIA_ISA(d); >>> + ViaISAState *s = VIA_ISA(obj); >>> >>> - via_isa_realize(d, errp); >>> - s->via_sio = VIA_SUPERIO(isa_create_simple(s->isa_bus, >>> - TYPE_VT82C686B_SUPERIO)); >>> + object_initialize_child(obj, "sio", &s->via_sio, >> TYPE_VT82C686B_SUPERIO); >>> } >>> >>> static void vt82c686b_class_init(ObjectClass *klass, void *data) >>> @@ -653,7 +656,7 @@ static void vt82c686b_class_init(ObjectClass *klass, >> void *data) >>> DeviceClass *dc = DEVICE_CLASS(klass); >>> PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); >>> >>> - k->realize = vt82c686b_realize; >>> + k->realize = via_isa_realize; >>> k->config_write = vt82c686b_write_config; >>> k->vendor_id = PCI_VENDOR_ID_VIA; >>> k->device_id = PCI_DEVICE_ID_VIA_82C686B_ISA; >>> @@ -670,6 +673,7 @@ static const TypeInfo vt82c686b_isa_info = { >>> .name = TYPE_VT82C686B_ISA, >>> .parent = TYPE_VIA_ISA, >>> .instance_size = sizeof(ViaISAState), >>> + .instance_init = vt82c686b_init, >>> .class_init = vt82c686b_class_init, >>> }; >>> >>> @@ -684,7 +688,7 @@ static void vt8231_write_config(PCIDevice *d, >> uint32_t addr, >>> pci_default_write_config(d, addr, val, len); >>> if (addr == 0x50) { >>> /* BIT(2): enable or disable superio config io ports */ >>> - via_superio_io_enable(s->via_sio, val & BIT(2)); >>> + via_superio_io_enable(&s->via_sio, val & BIT(2)); >>> } >>> } >>> >>> @@ -703,13 +707,11 @@ static void vt8231_isa_reset(DeviceState *dev) >>> pci_conf[0x6b] = 0x01; /* Fast IR I/O Base */ >>> } >>> >>> -static void vt8231_realize(PCIDevice *d, Error **errp) >>> +static void vt8231_init(Object *obj) >>> { >>> - ViaISAState *s = VIA_ISA(d); >>> + ViaISAState *s = VIA_ISA(obj); >>> >>> - via_isa_realize(d, errp); >>> - s->via_sio = VIA_SUPERIO(isa_create_simple(s->isa_bus, >>> - TYPE_VT8231_SUPERIO)); >>> + object_initialize_child(obj, "sio", &s->via_sio, >> TYPE_VT8231_SUPERIO); >>> } >>> >>> static void vt8231_class_init(ObjectClass *klass, void *data) >>> @@ -717,7 +719,7 @@ static void vt8231_class_init(ObjectClass *klass, >> void *data) >>> DeviceClass *dc = DEVICE_CLASS(klass); >>> PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); >>> >>> - k->realize = vt8231_realize; >>> + k->realize = via_isa_realize; >>> k->config_write = vt8231_write_config; >>> k->vendor_id = PCI_VENDOR_ID_VIA; >>> k->device_id = PCI_DEVICE_ID_VIA_8231_ISA; >>> @@ -734,6 +736,7 @@ static const TypeInfo vt8231_isa_info = { >>> .name = TYPE_VT8231_ISA, >>> .parent = TYPE_VIA_ISA, >>> .instance_size = sizeof(ViaISAState), >>> + .instance_init = vt8231_init, >>> .class_init = vt8231_class_init, >>> }; >>> >>> >> >
On Wed, Aug 24, 2022 at 1:36 AM BALATON Zoltan <balaton@eik.bme.hu> wrote: > On Tue, 23 Aug 2022, Bernhard Beschow wrote: > > On Tue, Aug 23, 2022 at 2:35 AM BALATON Zoltan <balaton@eik.bme.hu> > wrote: > > > >> On Tue, 23 Aug 2022, Bernhard Beschow wrote: > >>> The object creation now happens in chip-specific init methods which > >>> allows the realize methods to be consolidated into one method. Shifting > >>> the logic into the init methods has the addidional advantage that the > >>> parent object's init methods are called implicitly. > >> > >> This and later patches titled "QOM'ify" don't do what I understand on > >> QOMifying which is turining an old device model into a QOM object. These > >> devices are already QOMified, what's really done here is that they are > >> moved to the ViaISAState or embedded into it and created as part of the > >> south bridge rather then individually by the boards. Either my > >> understanding of what QOMify means is wrong or these patches are > misnamed. > >> > > > > I think your understanding is correct. Peter refers to it as the > > embed-the-device-struct style [1] which I can take as inspiration for > > renaming my patches in v2. > > > > Technically via_isa_realize() is the realize method of the abstract > >> TYPE_VIA_ISA class which were overriden by the subclasses but since QOM > >> does not call overridden methods implicitly this had to be explicitly > >> called in the overriding realize methods of the subclasses. Now that we > >> don't have to ovverride the method maybe it could be set once on the > >> VIA_ISA class then it may work that way but as it's done here is also OK > >> maybe as a reminder that this super class method should be called by any > >> overriding method if one's added in the future for some reason. > >> > > > > Right. This would involve moving some code around and creating a class > > struct. Do you think it's worth it? > > You mean a class_init func to assign realize as the class struct > via_isa_info already exists. Ah yes, of course. > But yes this would need to be moved after > via_isa_realize then. As I wrote above I don't think this is worth it, > especially becuase if in the future a realize method was re-added to the > subclasses then it's easy to forget to revert this and call the superclass > method so assigning via_isa_realize to the subclass as done here is OK and > I can think of it as a reminder to call this method when overriding it. > Also with the added class_init func it's shorter this way even if slightly > mixing different objects. So in the end I'm OK with this as it is. > Okay, I'll keep it as it is. Thanks, Bernhard > > Regards, > BALATON Zoltan > > > Best regards, > > Bernhard > > > > [1] > > > http://patchwork.ozlabs.org/project/qemu-devel/patch/20220205175913.31738-2-shentey@gmail.com/ > > > > Regards, > >> BALATON Zoltan > >> > >>> Signed-off-by: Bernhard Beschow <shentey@gmail.com> > >>> --- > >>> hw/isa/vt82c686.c | 33 ++++++++++++++++++--------------- > >>> 1 file changed, 18 insertions(+), 15 deletions(-) > >>> > >>> diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c > >>> index 8f656251b8..0217c98fe4 100644 > >>> --- a/hw/isa/vt82c686.c > >>> +++ b/hw/isa/vt82c686.c > >>> @@ -544,7 +544,7 @@ struct ViaISAState { > >>> qemu_irq cpu_intr; > >>> qemu_irq *isa_irqs; > >>> ISABus *isa_bus; > >>> - ViaSuperIOState *via_sio; > >>> + ViaSuperIOState via_sio; > >>> }; > >>> > >>> static const VMStateDescription vmstate_via = { > >>> @@ -602,6 +602,11 @@ static void via_isa_realize(PCIDevice *d, Error > >> **errp) > >>> d->wmask[i] = 0; > >>> } > >>> } > >>> + > >>> + /* Super I/O */ > >>> + if (!qdev_realize(DEVICE(&s->via_sio), BUS(s->isa_bus), errp)) { > >>> + return; > >>> + } > >>> } > >>> > >>> /* TYPE_VT82C686B_ISA */ > >>> @@ -615,7 +620,7 @@ static void vt82c686b_write_config(PCIDevice *d, > >> uint32_t addr, > >>> pci_default_write_config(d, addr, val, len); > >>> if (addr == 0x85) { > >>> /* BIT(1): enable or disable superio config io ports */ > >>> - via_superio_io_enable(s->via_sio, val & BIT(1)); > >>> + via_superio_io_enable(&s->via_sio, val & BIT(1)); > >>> } > >>> } > >>> > >>> @@ -639,13 +644,11 @@ static void vt82c686b_isa_reset(DeviceState *dev) > >>> pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */ > >>> } > >>> > >>> -static void vt82c686b_realize(PCIDevice *d, Error **errp) > >>> +static void vt82c686b_init(Object *obj) > >>> { > >>> - ViaISAState *s = VIA_ISA(d); > >>> + ViaISAState *s = VIA_ISA(obj); > >>> > >>> - via_isa_realize(d, errp); > >>> - s->via_sio = VIA_SUPERIO(isa_create_simple(s->isa_bus, > >>> - > TYPE_VT82C686B_SUPERIO)); > >>> + object_initialize_child(obj, "sio", &s->via_sio, > >> TYPE_VT82C686B_SUPERIO); > >>> } > >>> > >>> static void vt82c686b_class_init(ObjectClass *klass, void *data) > >>> @@ -653,7 +656,7 @@ static void vt82c686b_class_init(ObjectClass > *klass, > >> void *data) > >>> DeviceClass *dc = DEVICE_CLASS(klass); > >>> PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); > >>> > >>> - k->realize = vt82c686b_realize; > >>> + k->realize = via_isa_realize; > >>> k->config_write = vt82c686b_write_config; > >>> k->vendor_id = PCI_VENDOR_ID_VIA; > >>> k->device_id = PCI_DEVICE_ID_VIA_82C686B_ISA; > >>> @@ -670,6 +673,7 @@ static const TypeInfo vt82c686b_isa_info = { > >>> .name = TYPE_VT82C686B_ISA, > >>> .parent = TYPE_VIA_ISA, > >>> .instance_size = sizeof(ViaISAState), > >>> + .instance_init = vt82c686b_init, > >>> .class_init = vt82c686b_class_init, > >>> }; > >>> > >>> @@ -684,7 +688,7 @@ static void vt8231_write_config(PCIDevice *d, > >> uint32_t addr, > >>> pci_default_write_config(d, addr, val, len); > >>> if (addr == 0x50) { > >>> /* BIT(2): enable or disable superio config io ports */ > >>> - via_superio_io_enable(s->via_sio, val & BIT(2)); > >>> + via_superio_io_enable(&s->via_sio, val & BIT(2)); > >>> } > >>> } > >>> > >>> @@ -703,13 +707,11 @@ static void vt8231_isa_reset(DeviceState *dev) > >>> pci_conf[0x6b] = 0x01; /* Fast IR I/O Base */ > >>> } > >>> > >>> -static void vt8231_realize(PCIDevice *d, Error **errp) > >>> +static void vt8231_init(Object *obj) > >>> { > >>> - ViaISAState *s = VIA_ISA(d); > >>> + ViaISAState *s = VIA_ISA(obj); > >>> > >>> - via_isa_realize(d, errp); > >>> - s->via_sio = VIA_SUPERIO(isa_create_simple(s->isa_bus, > >>> - TYPE_VT8231_SUPERIO)); > >>> + object_initialize_child(obj, "sio", &s->via_sio, > >> TYPE_VT8231_SUPERIO); > >>> } > >>> > >>> static void vt8231_class_init(ObjectClass *klass, void *data) > >>> @@ -717,7 +719,7 @@ static void vt8231_class_init(ObjectClass *klass, > >> void *data) > >>> DeviceClass *dc = DEVICE_CLASS(klass); > >>> PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); > >>> > >>> - k->realize = vt8231_realize; > >>> + k->realize = via_isa_realize; > >>> k->config_write = vt8231_write_config; > >>> k->vendor_id = PCI_VENDOR_ID_VIA; > >>> k->device_id = PCI_DEVICE_ID_VIA_8231_ISA; > >>> @@ -734,6 +736,7 @@ static const TypeInfo vt8231_isa_info = { > >>> .name = TYPE_VT8231_ISA, > >>> .parent = TYPE_VIA_ISA, > >>> .instance_size = sizeof(ViaISAState), > >>> + .instance_init = vt8231_init, > >>> .class_init = vt8231_class_init, > >>> }; > >>> > >>> > >> > > >
diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c index 8f656251b8..0217c98fe4 100644 --- a/hw/isa/vt82c686.c +++ b/hw/isa/vt82c686.c @@ -544,7 +544,7 @@ struct ViaISAState { qemu_irq cpu_intr; qemu_irq *isa_irqs; ISABus *isa_bus; - ViaSuperIOState *via_sio; + ViaSuperIOState via_sio; }; static const VMStateDescription vmstate_via = { @@ -602,6 +602,11 @@ static void via_isa_realize(PCIDevice *d, Error **errp) d->wmask[i] = 0; } } + + /* Super I/O */ + if (!qdev_realize(DEVICE(&s->via_sio), BUS(s->isa_bus), errp)) { + return; + } } /* TYPE_VT82C686B_ISA */ @@ -615,7 +620,7 @@ static void vt82c686b_write_config(PCIDevice *d, uint32_t addr, pci_default_write_config(d, addr, val, len); if (addr == 0x85) { /* BIT(1): enable or disable superio config io ports */ - via_superio_io_enable(s->via_sio, val & BIT(1)); + via_superio_io_enable(&s->via_sio, val & BIT(1)); } } @@ -639,13 +644,11 @@ static void vt82c686b_isa_reset(DeviceState *dev) pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */ } -static void vt82c686b_realize(PCIDevice *d, Error **errp) +static void vt82c686b_init(Object *obj) { - ViaISAState *s = VIA_ISA(d); + ViaISAState *s = VIA_ISA(obj); - via_isa_realize(d, errp); - s->via_sio = VIA_SUPERIO(isa_create_simple(s->isa_bus, - TYPE_VT82C686B_SUPERIO)); + object_initialize_child(obj, "sio", &s->via_sio, TYPE_VT82C686B_SUPERIO); } static void vt82c686b_class_init(ObjectClass *klass, void *data) @@ -653,7 +656,7 @@ static void vt82c686b_class_init(ObjectClass *klass, void *data) DeviceClass *dc = DEVICE_CLASS(klass); PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); - k->realize = vt82c686b_realize; + k->realize = via_isa_realize; k->config_write = vt82c686b_write_config; k->vendor_id = PCI_VENDOR_ID_VIA; k->device_id = PCI_DEVICE_ID_VIA_82C686B_ISA; @@ -670,6 +673,7 @@ static const TypeInfo vt82c686b_isa_info = { .name = TYPE_VT82C686B_ISA, .parent = TYPE_VIA_ISA, .instance_size = sizeof(ViaISAState), + .instance_init = vt82c686b_init, .class_init = vt82c686b_class_init, }; @@ -684,7 +688,7 @@ static void vt8231_write_config(PCIDevice *d, uint32_t addr, pci_default_write_config(d, addr, val, len); if (addr == 0x50) { /* BIT(2): enable or disable superio config io ports */ - via_superio_io_enable(s->via_sio, val & BIT(2)); + via_superio_io_enable(&s->via_sio, val & BIT(2)); } } @@ -703,13 +707,11 @@ static void vt8231_isa_reset(DeviceState *dev) pci_conf[0x6b] = 0x01; /* Fast IR I/O Base */ } -static void vt8231_realize(PCIDevice *d, Error **errp) +static void vt8231_init(Object *obj) { - ViaISAState *s = VIA_ISA(d); + ViaISAState *s = VIA_ISA(obj); - via_isa_realize(d, errp); - s->via_sio = VIA_SUPERIO(isa_create_simple(s->isa_bus, - TYPE_VT8231_SUPERIO)); + object_initialize_child(obj, "sio", &s->via_sio, TYPE_VT8231_SUPERIO); } static void vt8231_class_init(ObjectClass *klass, void *data) @@ -717,7 +719,7 @@ static void vt8231_class_init(ObjectClass *klass, void *data) DeviceClass *dc = DEVICE_CLASS(klass); PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); - k->realize = vt8231_realize; + k->realize = via_isa_realize; k->config_write = vt8231_write_config; k->vendor_id = PCI_VENDOR_ID_VIA; k->device_id = PCI_DEVICE_ID_VIA_8231_ISA; @@ -734,6 +736,7 @@ static const TypeInfo vt8231_isa_info = { .name = TYPE_VT8231_ISA, .parent = TYPE_VIA_ISA, .instance_size = sizeof(ViaISAState), + .instance_init = vt8231_init, .class_init = vt8231_class_init, };
The object creation now happens in chip-specific init methods which allows the realize methods to be consolidated into one method. Shifting the logic into the init methods has the addidional advantage that the parent object's init methods are called implicitly. Signed-off-by: Bernhard Beschow <shentey@gmail.com> --- hw/isa/vt82c686.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-)