| Message ID | 20220825094155.4.I897770a7ac41f8dc3e37dfed12102bacdbf9da56@changeid (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: qcom: Fix broken regulator spec on RPMH boards | expand |
On Thu, Aug 25, 2022 at 09:42:02AM -0700, Douglas Anderson wrote: > This board uses RPMH, specifies "regulator-allow-set-load" for LDOs, > but doesn't specify any modes with "regulator-allowed-modes". > > Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement > get_optimum_mode(), not set_load()") the above meant that we were able > to set either LPM or HPM mode. After that commit (and fixes [1]) we'll > be stuck at the initial mode. Discussion of this has resulted in the > decision that the old dts files were wrong and should be fixed to > fully restore old functionality. > > Let's re-enable the old functionality by fixing the dts. > > [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid > > Fixes: 32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree") > Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> > --- > > .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 30 +++++++++++++++++++ > 1 file changed, 30 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > index 16c6e4d920bb..0c2534b4ec24 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > @@ -80,6 +80,9 @@ vreg_l3b: ldo3 { > regulator-max-microvolt = <1200000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > regulator-boot-on; > }; > > @@ -89,6 +92,9 @@ vreg_l4b: ldo4 { > regulator-max-microvolt = <912000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > > vreg_l6b: ldo6 { > @@ -97,6 +103,9 @@ vreg_l6b: ldo6 { > regulator-max-microvolt = <880000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > regulator-boot-on; > regulator-always-on; // FIXME: VDD_A_EDP_0_0P9 > }; > @@ -112,6 +121,9 @@ vreg_l1c: ldo1 { > regulator-max-microvolt = <1800000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > > vreg_l12c: ldo12 { > @@ -120,6 +132,9 @@ vreg_l12c: ldo12 { > regulator-max-microvolt = <1800000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > > vreg_l13c: ldo13 { > @@ -128,6 +143,9 @@ vreg_l13c: ldo13 { > regulator-max-microvolt = <3072000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > }; > > @@ -143,6 +161,9 @@ vreg_l3d: ldo3 { > regulator-max-microvolt = <1200000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > > vreg_l4d: ldo4 { > @@ -151,6 +172,9 @@ vreg_l4d: ldo4 { > regulator-max-microvolt = <1200000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > > vreg_l7d: ldo7 { > @@ -159,6 +183,9 @@ vreg_l7d: ldo7 { > regulator-max-microvolt = <3072000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > > vreg_l9d: ldo9 { > @@ -167,6 +194,9 @@ vreg_l9d: ldo9 { > regulator-max-microvolt = <912000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > }; > }; > -- > 2.37.2.672.g94769d06f0-goog >
On 25.08.2022 18:42, Douglas Anderson wrote: > This board uses RPMH, specifies "regulator-allow-set-load" for LDOs, > but doesn't specify any modes with "regulator-allowed-modes". > > Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement > get_optimum_mode(), not set_load()") the above meant that we were able > to set either LPM or HPM mode. After that commit (and fixes [1]) we'll > be stuck at the initial mode. Discussion of this has resulted in the > decision that the old dts files were wrong and should be fixed to > fully restore old functionality. > > Let's re-enable the old functionality by fixing the dts. > > [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid > > Fixes: 32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree") > Signed-off-by: Douglas Anderson <dianders@chromium.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Konrad > > .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 30 +++++++++++++++++++ > 1 file changed, 30 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > index 16c6e4d920bb..0c2534b4ec24 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > @@ -80,6 +80,9 @@ vreg_l3b: ldo3 { > regulator-max-microvolt = <1200000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > regulator-boot-on; > }; > > @@ -89,6 +92,9 @@ vreg_l4b: ldo4 { > regulator-max-microvolt = <912000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > > vreg_l6b: ldo6 { > @@ -97,6 +103,9 @@ vreg_l6b: ldo6 { > regulator-max-microvolt = <880000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > regulator-boot-on; > regulator-always-on; // FIXME: VDD_A_EDP_0_0P9 > }; > @@ -112,6 +121,9 @@ vreg_l1c: ldo1 { > regulator-max-microvolt = <1800000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > > vreg_l12c: ldo12 { > @@ -120,6 +132,9 @@ vreg_l12c: ldo12 { > regulator-max-microvolt = <1800000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > > vreg_l13c: ldo13 { > @@ -128,6 +143,9 @@ vreg_l13c: ldo13 { > regulator-max-microvolt = <3072000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > }; > > @@ -143,6 +161,9 @@ vreg_l3d: ldo3 { > regulator-max-microvolt = <1200000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > > vreg_l4d: ldo4 { > @@ -151,6 +172,9 @@ vreg_l4d: ldo4 { > regulator-max-microvolt = <1200000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > > vreg_l7d: ldo7 { > @@ -159,6 +183,9 @@ vreg_l7d: ldo7 { > regulator-max-microvolt = <3072000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > > vreg_l9d: ldo9 { > @@ -167,6 +194,9 @@ vreg_l9d: ldo9 { > regulator-max-microvolt = <912000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > }; > };
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 16c6e4d920bb..0c2534b4ec24 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -80,6 +80,9 @@ vreg_l3b: ldo3 { regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; regulator-boot-on; }; @@ -89,6 +92,9 @@ vreg_l4b: ldo4 { regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l6b: ldo6 { @@ -97,6 +103,9 @@ vreg_l6b: ldo6 { regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; regulator-boot-on; regulator-always-on; // FIXME: VDD_A_EDP_0_0P9 }; @@ -112,6 +121,9 @@ vreg_l1c: ldo1 { regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l12c: ldo12 { @@ -120,6 +132,9 @@ vreg_l12c: ldo12 { regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l13c: ldo13 { @@ -128,6 +143,9 @@ vreg_l13c: ldo13 { regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; }; @@ -143,6 +161,9 @@ vreg_l3d: ldo3 { regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l4d: ldo4 { @@ -151,6 +172,9 @@ vreg_l4d: ldo4 { regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7d: ldo7 { @@ -159,6 +183,9 @@ vreg_l7d: ldo7 { regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l9d: ldo9 { @@ -167,6 +194,9 @@ vreg_l9d: ldo9 { regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; }; };
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs, but doesn't specify any modes with "regulator-allowed-modes". Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement get_optimum_mode(), not set_load()") the above meant that we were able to set either LPM or HPM mode. After that commit (and fixes [1]) we'll be stuck at the initial mode. Discussion of this has resulted in the decision that the old dts files were wrong and should be fixed to fully restore old functionality. Let's re-enable the old functionality by fixing the dts. [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid Fixes: 32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree") Signed-off-by: Douglas Anderson <dianders@chromium.org> --- .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 30 +++++++++++++++++++ 1 file changed, 30 insertions(+)