| Message ID | dd9069e0527f2da04b6567fd17b19545646f4348.1658192351.git.Thinh.Nguyen@synopsys.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | usb: gadget: f_tcm: Enhance UASP driver | expand |
On 2022-07-18 18:27:45 [-0700], Thinh Nguyen wrote: > When preparing request for data write state, the next state is > UASP_SEND_STATUS. When data write completes, the next state is > UASP_QUEUE_COMMAND. Without this change, the command will transition to > the wrong state. Why is this needed now, what is the outcome of not having it? My point is, was this always broken, worked by chance and broke over time while code was changed? > Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> > --- > Changes in v2: > - Move a related change from TASK MANAGEMENT updating cmd state to > UASP_QUEUE_COMMAND to here. > > drivers/usb/gadget/function/f_tcm.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c > index 1e7d29f8aecb..d7318c84af98 100644 > --- a/drivers/usb/gadget/function/f_tcm.c > +++ b/drivers/usb/gadget/function/f_tcm.c > @@ -934,6 +934,8 @@ static void usbg_data_write_cmpl(struct usb_ep *ep, struct usb_request *req) > struct usbg_cmd *cmd = req->context; > struct se_cmd *se_cmd = &cmd->se_cmd; > > + cmd->state = UASP_QUEUE_COMMAND; > + > if (req->status < 0) { > pr_err("%s() state %d transfer failed\n", __func__, cmd->state); > goto cleanup; > @@ -976,6 +978,8 @@ static int usbg_prepare_w_request(struct usbg_cmd *cmd, struct usb_request *req) > req->complete = usbg_data_write_cmpl; > req->length = se_cmd->data_length; > req->context = cmd; > + > + cmd->state = UASP_SEND_STATUS; > return 0; > } > Sebastian
On Fri, Aug 26, 2022, Sebastian Andrzej Siewior wrote: > On 2022-07-18 18:27:45 [-0700], Thinh Nguyen wrote: > > When preparing request for data write state, the next state is > > UASP_SEND_STATUS. When data write completes, the next state is > > UASP_QUEUE_COMMAND. Without this change, the command will transition to > > the wrong state. > > Why is this needed now, what is the outcome of not having it? > My point is, was this always broken, worked by chance and broke over > time while code was changed? This patch should've been part of the patch "usb: gadget: f_tcm: Execute command on write completion", and maybe I should've been more clear in the commmit message. Previously, the f_tcm doesn't take care of the case where the queued data could fail/aborted. It attempts to execute the command anyway. This change here takes care of both scenarios. If the request fails, the next state is to send status, and if the request completes successfully, the next state is to queue a new command. Thanks, Thinh > > > Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> > > --- > > Changes in v2: > > - Move a related change from TASK MANAGEMENT updating cmd state to > > UASP_QUEUE_COMMAND to here. > > > > drivers/usb/gadget/function/f_tcm.c | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c > > index 1e7d29f8aecb..d7318c84af98 100644 > > --- a/drivers/usb/gadget/function/f_tcm.c > > +++ b/drivers/usb/gadget/function/f_tcm.c > > @@ -934,6 +934,8 @@ static void usbg_data_write_cmpl(struct usb_ep *ep, struct usb_request *req) > > struct usbg_cmd *cmd = req->context; > > struct se_cmd *se_cmd = &cmd->se_cmd; > > > > + cmd->state = UASP_QUEUE_COMMAND; > > + > > if (req->status < 0) { > > pr_err("%s() state %d transfer failed\n", __func__, cmd->state); > > goto cleanup; > > @@ -976,6 +978,8 @@ static int usbg_prepare_w_request(struct usbg_cmd *cmd, struct usb_request *req) > > req->complete = usbg_data_write_cmpl; > > req->length = se_cmd->data_length; > > req->context = cmd; > > + > > + cmd->state = UASP_SEND_STATUS; > > return 0; > > } > > > > Sebastian
diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c index 1e7d29f8aecb..d7318c84af98 100644 --- a/drivers/usb/gadget/function/f_tcm.c +++ b/drivers/usb/gadget/function/f_tcm.c @@ -934,6 +934,8 @@ static void usbg_data_write_cmpl(struct usb_ep *ep, struct usb_request *req) struct usbg_cmd *cmd = req->context; struct se_cmd *se_cmd = &cmd->se_cmd; + cmd->state = UASP_QUEUE_COMMAND; + if (req->status < 0) { pr_err("%s() state %d transfer failed\n", __func__, cmd->state); goto cleanup; @@ -976,6 +978,8 @@ static int usbg_prepare_w_request(struct usbg_cmd *cmd, struct usb_request *req) req->complete = usbg_data_write_cmpl; req->length = se_cmd->data_length; req->context = cmd; + + cmd->state = UASP_SEND_STATUS; return 0; }
When preparing request for data write state, the next state is UASP_SEND_STATUS. When data write completes, the next state is UASP_QUEUE_COMMAND. Without this change, the command will transition to the wrong state. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> --- Changes in v2: - Move a related change from TASK MANAGEMENT updating cmd state to UASP_QUEUE_COMMAND to here. drivers/usb/gadget/function/f_tcm.c | 4 ++++ 1 file changed, 4 insertions(+)