diff mbox series

[v4,10/10] arm64: dts: marvell: add support for Methode eDPU

Message ID 20220516124828.45144-10-robert.marko@sartura.hr (mailing list archive)
State New, archived
Headers show
Series [v4,01/10] dt-bindings: vendor-prefixes: add Methode Electronics | expand

Commit Message

Robert Marko May 16, 2022, 12:48 p.m. UTC
Methode eDPU is an Armada 3720 powered board based on the Methode uDPU.

They feature the same CPU, RAM, and storage as well as the form factor.

However, eDPU only has one SFP slot plus a copper G.hn port.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v2:
* Make the DTS split a separate commit
---
 arch/arm64/boot/dts/marvell/Makefile             |  1 +
 arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts | 14 ++++++++++++++
 2 files changed, 15 insertions(+)
 create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts

Comments

Robert Marko Aug. 8, 2022, 11:42 a.m. UTC | #1
On Mon, May 16, 2022 at 2:48 PM Robert Marko <robert.marko@sartura.hr> wrote:
>
> Methode eDPU is an Armada 3720 powered board based on the Methode uDPU.
>
> They feature the same CPU, RAM, and storage as well as the form factor.
>
> However, eDPU only has one SFP slot plus a copper G.hn port.
>
> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> Changes in v2:
> * Make the DTS split a separate commit
> ---
>  arch/arm64/boot/dts/marvell/Makefile             |  1 +
>  arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts | 14 ++++++++++++++
>  2 files changed, 15 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
>
> diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
> index 1c794cdcb8e6..104d7d7e8215 100644
> --- a/arch/arm64/boot/dts/marvell/Makefile
> +++ b/arch/arm64/boot/dts/marvell/Makefile
> @@ -1,6 +1,7 @@
>  # SPDX-License-Identifier: GPL-2.0
>  # Mvebu SoC Family
>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
> +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb
>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
> new file mode 100644
> index 000000000000..57fc698e55d0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include "armada-3720-uDPU.dtsi"
> +
> +/ {
> +       model = "Methode eDPU Board";
> +       compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710";
> +};
> +
> +&eth0 {
> +       phy-mode = "2500base-x";
> +};
> --
> 2.36.1
>

Hi Gregory,
Is there something else that I can improve in the series?

Regards,
Robert
Gregory CLEMENT Aug. 30, 2022, 7:42 a.m. UTC | #2
Robert Marko <robert.marko@sartura.hr> writes:

> On Mon, May 16, 2022 at 2:48 PM Robert Marko <robert.marko@sartura.hr> wrote:
>>
>> Methode eDPU is an Armada 3720 powered board based on the Methode uDPU.
>>
>> They feature the same CPU, RAM, and storage as well as the form factor.
>>
>> However, eDPU only has one SFP slot plus a copper G.hn port.
>>
>> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>> Changes in v2:
>> * Make the DTS split a separate commit
>> ---
>>  arch/arm64/boot/dts/marvell/Makefile             |  1 +
>>  arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts | 14 ++++++++++++++
>>  2 files changed, 15 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
>>
>> diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
>> index 1c794cdcb8e6..104d7d7e8215 100644
>> --- a/arch/arm64/boot/dts/marvell/Makefile
>> +++ b/arch/arm64/boot/dts/marvell/Makefile
>> @@ -1,6 +1,7 @@
>>  # SPDX-License-Identifier: GPL-2.0
>>  # Mvebu SoC Family
>>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
>> +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb
>>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
>>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
>>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
>> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
>> new file mode 100644
>> index 000000000000..57fc698e55d0
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
>> @@ -0,0 +1,14 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +
>> +/dts-v1/;
>> +
>> +#include "armada-3720-uDPU.dtsi"
>> +
>> +/ {
>> +       model = "Methode eDPU Board";
>> +       compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710";
>> +};
>> +
>> +&eth0 {
>> +       phy-mode = "2500base-x";
>> +};
>> --
>> 2.36.1
>>
>
> Hi Gregory,
Hello Roberto,

> Is there something else that I can improve in the series?

Sorry for having missed this series. At first view it seems OK, I am
going to have a closer look this week.

Gregory


>
> Regards,
> Robert
>
> -- 
> Robert Marko
> Staff Embedded Linux Engineer
> Sartura Ltd.
> Lendavska ulica 16a
> 10000 Zagreb, Croatia
> Email: robert.marko@sartura.hr
> Web: www.sartura.hr
Robert Marko Aug. 31, 2022, 11:12 a.m. UTC | #3
On Tue, Aug 30, 2022 at 9:42 AM Gregory CLEMENT
<gregory.clement@bootlin.com> wrote:
>
> Robert Marko <robert.marko@sartura.hr> writes:
>
> > On Mon, May 16, 2022 at 2:48 PM Robert Marko <robert.marko@sartura.hr> wrote:
> >>
> >> Methode eDPU is an Armada 3720 powered board based on the Methode uDPU.
> >>
> >> They feature the same CPU, RAM, and storage as well as the form factor.
> >>
> >> However, eDPU only has one SFP slot plus a copper G.hn port.
> >>
> >> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
> >> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> >> ---
> >> Changes in v2:
> >> * Make the DTS split a separate commit
> >> ---
> >>  arch/arm64/boot/dts/marvell/Makefile             |  1 +
> >>  arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts | 14 ++++++++++++++
> >>  2 files changed, 15 insertions(+)
> >>  create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
> >>
> >> diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
> >> index 1c794cdcb8e6..104d7d7e8215 100644
> >> --- a/arch/arm64/boot/dts/marvell/Makefile
> >> +++ b/arch/arm64/boot/dts/marvell/Makefile
> >> @@ -1,6 +1,7 @@
> >>  # SPDX-License-Identifier: GPL-2.0
> >>  # Mvebu SoC Family
> >>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
> >> +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb
> >>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
> >>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
> >>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
> >> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
> >> new file mode 100644
> >> index 000000000000..57fc698e55d0
> >> --- /dev/null
> >> +++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
> >> @@ -0,0 +1,14 @@
> >> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> >> +
> >> +/dts-v1/;
> >> +
> >> +#include "armada-3720-uDPU.dtsi"
> >> +
> >> +/ {
> >> +       model = "Methode eDPU Board";
> >> +       compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710";
> >> +};
> >> +
> >> +&eth0 {
> >> +       phy-mode = "2500base-x";
> >> +};
> >> --
> >> 2.36.1
> >>
> >
> > Hi Gregory,
> Hello Roberto,
>
> > Is there something else that I can improve in the series?
>
> Sorry for having missed this series. At first view it seems OK, I am
> going to have a closer look this week.

Thanks, that sounds good.

Regards,
Robert
>
> Gregory
>
>
> >
> > Regards,
> > Robert
> >
> > --
> > Robert Marko
> > Staff Embedded Linux Engineer
> > Sartura Ltd.
> > Lendavska ulica 16a
> > 10000 Zagreb, Croatia
> > Email: robert.marko@sartura.hr
> > Web: www.sartura.hr
>
> --
> Gregory Clement, Bootlin
> Embedded Linux and Kernel engineering
> http://bootlin.com
Gregory CLEMENT Sept. 2, 2022, 3:22 p.m. UTC | #4
Robert Marko <robert.marko@sartura.hr> writes:

> On Tue, Aug 30, 2022 at 9:42 AM Gregory CLEMENT
> <gregory.clement@bootlin.com> wrote:
>>
>> Robert Marko <robert.marko@sartura.hr> writes:
>>
>> > On Mon, May 16, 2022 at 2:48 PM Robert Marko <robert.marko@sartura.hr> wrote:
>> >>
>> >> Methode eDPU is an Armada 3720 powered board based on the Methode uDPU.
>> >>
>> >> They feature the same CPU, RAM, and storage as well as the form factor.
>> >>
>> >> However, eDPU only has one SFP slot plus a copper G.hn port.
>> >>
>> >> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
>> >> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> >> ---
>> >> Changes in v2:
>> >> * Make the DTS split a separate commit
>> >> ---
>> >>  arch/arm64/boot/dts/marvell/Makefile             |  1 +
>> >>  arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts | 14 ++++++++++++++
>> >>  2 files changed, 15 insertions(+)
>> >>  create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
>> >>
>> >> diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
>> >> index 1c794cdcb8e6..104d7d7e8215 100644
>> >> --- a/arch/arm64/boot/dts/marvell/Makefile
>> >> +++ b/arch/arm64/boot/dts/marvell/Makefile
>> >> @@ -1,6 +1,7 @@
>> >>  # SPDX-License-Identifier: GPL-2.0
>> >>  # Mvebu SoC Family
>> >>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
>> >> +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb
>> >>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
>> >>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
>> >>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
>> >> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
>> >> new file mode 100644
>> >> index 000000000000..57fc698e55d0
>> >> --- /dev/null
>> >> +++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
>> >> @@ -0,0 +1,14 @@
>> >> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> >> +
>> >> +/dts-v1/;
>> >> +
>> >> +#include "armada-3720-uDPU.dtsi"
>> >> +
>> >> +/ {
>> >> +       model = "Methode eDPU Board";
>> >> +       compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710";
>> >> +};
>> >> +
>> >> +&eth0 {
>> >> +       phy-mode = "2500base-x";
>> >> +};
>> >> --
>> >> 2.36.1
>> >>
>> >
>> > Hi Gregory,
>> Hello Roberto,
>>
>> > Is there something else that I can improve in the series?
>>
>> Sorry for having missed this series. At first view it seems OK, I am
>> going to have a closer look this week.
>
> Thanks, that sounds good.

Hello,

could you send again patch 8, I managed to apply all the other ones
excepting this one.

Thanks,

Gregory


>
> Regards,
> Robert
>>
>> Gregory
>>
>>
>> >
>> > Regards,
>> > Robert
>> >
>> > --
>> > Robert Marko
>> > Staff Embedded Linux Engineer
>> > Sartura Ltd.
>> > Lendavska ulica 16a
>> > 10000 Zagreb, Croatia
>> > Email: robert.marko@sartura.hr
>> > Web: www.sartura.hr
>>
>> --
>> Gregory Clement, Bootlin
>> Embedded Linux and Kernel engineering
>> http://bootlin.com
>
>
>
> -- 
> Robert Marko
> Staff Embedded Linux Engineer
> Sartura Ltd.
> Lendavska ulica 16a
> 10000 Zagreb, Croatia
> Email: robert.marko@sartura.hr
> Web: www.sartura.hr
Gregory CLEMENT Sept. 2, 2022, 4:13 p.m. UTC | #5
Gregory CLEMENT <gregory.clement@bootlin.com> writes:

> Robert Marko <robert.marko@sartura.hr> writes:
>
>> On Tue, Aug 30, 2022 at 9:42 AM Gregory CLEMENT
>> <gregory.clement@bootlin.com> wrote:
>>>
>>> Robert Marko <robert.marko@sartura.hr> writes:
>>>
>>> > On Mon, May 16, 2022 at 2:48 PM Robert Marko <robert.marko@sartura.hr> wrote:
>>> >>
>>> >> Methode eDPU is an Armada 3720 powered board based on the Methode uDPU.
>>> >>
>>> >> They feature the same CPU, RAM, and storage as well as the form factor.
>>> >>
>>> >> However, eDPU only has one SFP slot plus a copper G.hn port.
>>> >>
>>> >> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
>>> >> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>> >> ---
>>> >> Changes in v2:
>>> >> * Make the DTS split a separate commit
>>> >> ---
>>> >>  arch/arm64/boot/dts/marvell/Makefile             |  1 +
>>> >>  arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts | 14 ++++++++++++++
>>> >>  2 files changed, 15 insertions(+)
>>> >>  create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
>>> >>
>>> >> diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
>>> >> index 1c794cdcb8e6..104d7d7e8215 100644
>>> >> --- a/arch/arm64/boot/dts/marvell/Makefile
>>> >> +++ b/arch/arm64/boot/dts/marvell/Makefile
>>> >> @@ -1,6 +1,7 @@
>>> >>  # SPDX-License-Identifier: GPL-2.0
>>> >>  # Mvebu SoC Family
>>> >>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
>>> >> +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb
>>> >>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
>>> >>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
>>> >>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
>>> >> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
>>> >> new file mode 100644
>>> >> index 000000000000..57fc698e55d0
>>> >> --- /dev/null
>>> >> +++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
>>> >> @@ -0,0 +1,14 @@
>>> >> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>> >> +
>>> >> +/dts-v1/;
>>> >> +
>>> >> +#include "armada-3720-uDPU.dtsi"
>>> >> +
>>> >> +/ {
>>> >> +       model = "Methode eDPU Board";
>>> >> +       compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710";
>>> >> +};
>>> >> +
>>> >> +&eth0 {
>>> >> +       phy-mode = "2500base-x";
>>> >> +};
>>> >> --
>>> >> 2.36.1
>>> >>
>>> >
>>> > Hi Gregory,
>>> Hello Roberto,
>>>
>>> > Is there something else that I can improve in the series?
>>>
>>> Sorry for having missed this series. At first view it seems OK, I am
>>> going to have a closer look this week.
>>
>> Thanks, that sounds good.
>
> Hello,
>
> could you send again patch 8, I managed to apply all the other ones
> excepting this one.

Finally I managed to sort it out, all the series is applied on mvebu/dt64

Thanks,

Gregory
>
>
>>
>> Regards,
>> Robert
>>>
>>> Gregory
>>>
>>>
>>> >
>>> > Regards,
>>> > Robert
>>> >
>>> > --
>>> > Robert Marko
>>> > Staff Embedded Linux Engineer
>>> > Sartura Ltd.
>>> > Lendavska ulica 16a
>>> > 10000 Zagreb, Croatia
>>> > Email: robert.marko@sartura.hr
>>> > Web: www.sartura.hr
>>>
>>> --
>>> Gregory Clement, Bootlin
>>> Embedded Linux and Kernel engineering
>>> http://bootlin.com
>>
>>
>>
>> -- 
>> Robert Marko
>> Staff Embedded Linux Engineer
>> Sartura Ltd.
>> Lendavska ulica 16a
>> 10000 Zagreb, Croatia
>> Email: robert.marko@sartura.hr
>> Web: www.sartura.hr
>
> -- 
> Gregory Clement, Bootlin
> Embedded Linux and Kernel engineering
> http://bootlin.com
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Robert Marko Sept. 2, 2022, 5:26 p.m. UTC | #6
On Fri, Sep 2, 2022 at 6:13 PM Gregory CLEMENT
<gregory.clement@bootlin.com> wrote:
>
> Gregory CLEMENT <gregory.clement@bootlin.com> writes:
>
> > Robert Marko <robert.marko@sartura.hr> writes:
> >
> >> On Tue, Aug 30, 2022 at 9:42 AM Gregory CLEMENT
> >> <gregory.clement@bootlin.com> wrote:
> >>>
> >>> Robert Marko <robert.marko@sartura.hr> writes:
> >>>
> >>> > On Mon, May 16, 2022 at 2:48 PM Robert Marko <robert.marko@sartura.hr> wrote:
> >>> >>
> >>> >> Methode eDPU is an Armada 3720 powered board based on the Methode uDPU.
> >>> >>
> >>> >> They feature the same CPU, RAM, and storage as well as the form factor.
> >>> >>
> >>> >> However, eDPU only has one SFP slot plus a copper G.hn port.
> >>> >>
> >>> >> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
> >>> >> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> >>> >> ---
> >>> >> Changes in v2:
> >>> >> * Make the DTS split a separate commit
> >>> >> ---
> >>> >>  arch/arm64/boot/dts/marvell/Makefile             |  1 +
> >>> >>  arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts | 14 ++++++++++++++
> >>> >>  2 files changed, 15 insertions(+)
> >>> >>  create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
> >>> >>
> >>> >> diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
> >>> >> index 1c794cdcb8e6..104d7d7e8215 100644
> >>> >> --- a/arch/arm64/boot/dts/marvell/Makefile
> >>> >> +++ b/arch/arm64/boot/dts/marvell/Makefile
> >>> >> @@ -1,6 +1,7 @@
> >>> >>  # SPDX-License-Identifier: GPL-2.0
> >>> >>  # Mvebu SoC Family
> >>> >>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
> >>> >> +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb
> >>> >>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
> >>> >>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
> >>> >>  dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
> >>> >> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
> >>> >> new file mode 100644
> >>> >> index 000000000000..57fc698e55d0
> >>> >> --- /dev/null
> >>> >> +++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
> >>> >> @@ -0,0 +1,14 @@
> >>> >> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> >>> >> +
> >>> >> +/dts-v1/;
> >>> >> +
> >>> >> +#include "armada-3720-uDPU.dtsi"
> >>> >> +
> >>> >> +/ {
> >>> >> +       model = "Methode eDPU Board";
> >>> >> +       compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710";
> >>> >> +};
> >>> >> +
> >>> >> +&eth0 {
> >>> >> +       phy-mode = "2500base-x";
> >>> >> +};
> >>> >> --
> >>> >> 2.36.1
> >>> >>
> >>> >
> >>> > Hi Gregory,
> >>> Hello Roberto,
> >>>
> >>> > Is there something else that I can improve in the series?
> >>>
> >>> Sorry for having missed this series. At first view it seems OK, I am
> >>> going to have a closer look this week.
> >>
> >> Thanks, that sounds good.
> >
> > Hello,
> >
> > could you send again patch 8, I managed to apply all the other ones
> > excepting this one.
>
> Finally I managed to sort it out, all the series is applied on mvebu/dt64

Thanks,
Regards
Robert
>
> Thanks,
>
> Gregory
> >
> >
> >>
> >> Regards,
> >> Robert
> >>>
> >>> Gregory
> >>>
> >>>
> >>> >
> >>> > Regards,
> >>> > Robert
> >>> >
> >>> > --
> >>> > Robert Marko
> >>> > Staff Embedded Linux Engineer
> >>> > Sartura Ltd.
> >>> > Lendavska ulica 16a
> >>> > 10000 Zagreb, Croatia
> >>> > Email: robert.marko@sartura.hr
> >>> > Web: www.sartura.hr
> >>>
> >>> --
> >>> Gregory Clement, Bootlin
> >>> Embedded Linux and Kernel engineering
> >>> http://bootlin.com
> >>
> >>
> >>
> >> --
> >> Robert Marko
> >> Staff Embedded Linux Engineer
> >> Sartura Ltd.
> >> Lendavska ulica 16a
> >> 10000 Zagreb, Croatia
> >> Email: robert.marko@sartura.hr
> >> Web: www.sartura.hr
> >
> > --
> > Gregory Clement, Bootlin
> > Embedded Linux and Kernel engineering
> > http://bootlin.com
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
> --
> Gregory Clement, Bootlin
> Embedded Linux and Kernel engineering
> http://bootlin.com
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 1c794cdcb8e6..104d7d7e8215 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -1,6 +1,7 @@ 
 # SPDX-License-Identifier: GPL-2.0
 # Mvebu SoC Family
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
new file mode 100644
index 000000000000..57fc698e55d0
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
@@ -0,0 +1,14 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "armada-3720-uDPU.dtsi"
+
+/ {
+	model = "Methode eDPU Board";
+	compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710";
+};
+
+&eth0 {
+	phy-mode = "2500base-x";
+};